I'm looking a stock rom which is already extracted/unpack from OFP file. trying to reset my phone which is the previous owner did not unlink the oppo id unit, when i try to reset the data and reformat in the recovery, its asking the password and can't continue to install the apps. i try to update in the recovery but still i can't coninue. also can't contact the previous owner, the contact number that he gave me.. its a boogey.
Related
Hello
here i am posting here because i cant post on Miscellaneous Android Development , how ever i think i post there before while working on B5512
I Just got new G700 it came with B115 middle east channel , phone is good but as a start is there is a update i must ask my self is root ready , and CWM for sure so i start the digging
@chamaruco thank you for your great thread which saved and helped many people
now i got a file and i think you were looking for it ""G700-U10_V100R001C00B124CUSTC432D001_Firmware_Portugal_Channel-Others_4.2.1_EMUI 1.8_05021LMW.zip"" it contain usb upgrade and sd upgrade with drv and flash tool
i notice EMUI 1.8 not 1.6 which i saw for example a permission manager with it on P6 is that here in that rom too ?
is that rom improved than mine b115 phone is good for first look but
(in B115)
1-camera quality is strange i dont mean bad but it look very strange it is like very poor on quality
2-in call volume is too low in my opinion all " in test mode"
Question now did any one get that update "EMUI 1.8 B124" can tell is there is any improvements ?!
Question am i able to flash CWM image directly with flash tool to save some annoying procedures ?!
a member here provide flasher and cwm.img and orginal recovery.img
i did not work with the phone yet need to shift data from old phone remove ext2 part and prepare for change , and feeling lost here
want to strike it all once
i will upload "EMUI 1.8 B124" soon as it came from a private server
any suggestions are welcome
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
how to install this firmware i.e. B124 on G700-10
chamaruco said:
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Click to expand...
Click to collapse
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
talvigi said:
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
Click to expand...
Click to collapse
Dload inside put update.app file, restart in updatemode
chamaruco said:
Dload inside put update.app file, restart in updatemode
Click to expand...
Click to collapse
But my mobile does not boot into CWM recovery mode as i have seen in my previous Qmobile A8 it always restarts in the defualt recovery mode which only give options to "1. reboot, 2. update from SDcard, 3. update from cashe, 4. wipe/delete user data and wipe/delete cache and in the last there is a calibarate TP, AND OFF COURSE THESE ALL ARE THE ANDROID BUILTIN RECOVERY STEPS NOT OF THE CWM
And off course there is not any file or folder named update.app in the downloaded .zip/extracted file. "as i have mentioned above the folder contains a folder named META-INF and three img files named as boot cust and system while a .bin file named logo too.
THANKS FOR YOUR TIME AND HELP.
foffa said:
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
Click to expand...
Click to collapse
So after I select the Reworked scatter file there is only the sec_ro partition checked to flash. So after flashing it do I now select the previous scatter file and then flash everything (including preloader)?
Hi guys!
I was hoping one of you could help me.
Yesterday i modified a build.prop file on my NextBook EBM8000ND (Next800T) tablet, causing it to get stuck in a bootloop every time it's turned on. I've been searching the Internet all day long but it's hard to find support when you have a device which no one in the world uses . It was rooted but I did a factory reset hoping that it would fix it. It didn't and now it's also unrooted. I tried to make a custom update.zip with the backup of the original build.prop file but the stock recovery simply refuses to load any update file. It always stops at verification. I used 7zip with store option. I tried signing the zip, I even edited the updater script to only print some text on the screen but the recovery still wouldn't load it. I tried to find a way to install CWM using sdcard but with no luck. When i tried to use ADB in recovery the device says: "failed to open driver control: No such file or directory". It might be worth mentioning that I found my device's ROM online with boot.img and recovery.img files and a .tar file which contains the original system folder.
Is there any way to make the stock recovery (since installing CWM or TWRP seems impossible) read my update file? Or is there another way to fix this? I only need to replace that single file.
Hoping to get help soon.
Cheers!
Hi,
I´m getting software install failed! on my Huawei wile doing an OTA ROM update.
It is an intermediate update so update.app does not have system.img, but rather the update.zip has folders with a patch for the /System.
As of that, I wanted to know what's wrong, so, is there any log file created from the update procedure?
G Play Mini - CHC-U01 Update to V100R001C434B120
OTA URL:
http://update.hicloud.com/TDS/data/files/p3/s15/G854/g104/v29161/f1/full/update.zip
Inside update.zip is update.app (and the folders to patch the /system) which in turn compacts another update.app inside.
So, either "open inside" update.app or extract update.app from update.zip, rename that update.app to update.zip and open the last update.zip to get the update.app that can be opened with HuaweiUpdateExtractor to get the *.img files (exept system.img).
Since I can´t adb in recovery I can´t do a logcat.
Can anyone help me debug the OTA update?
Build Number
This is getting more like a diary...
I found the log file in ./splash2/recovery.log
Now, where is the system getting the information of the build number other than from build.prop, because the info on the "about" menu is different form what is in ro.build.display.id or any other variable on the file.
I'll appreciate any help!
I found that the variable is stored in ./cust/hw/eu/prop/local.prop (on my case the path "eu" is because my CustCVersion is European, on Russian should be .../ru/prop/local.prop").
Unfortunately I didn´t know that CWM doesn´t include cust.img on nandroid backups, so i don´t have the original ./cust structure to replace the original settings.
i have update fail with chc-u01 firmware 6.0.
how cani do?
I rooted my phone, and then i was trying to flash a Marshmallow Rom. For this, i wiped my system, boot, dalvik cache, internal memory. I forgot to take a nandroid backup. For some reasons, there was some error in flashing that zip file, so i tried to reboot my phone normally and it failed. When i reboot my phone, the company logo appears and it remain sticked there. For now, i could only access the recovery and fastboot. Please HELP me..... Thank you.....
You got exactly same problem with me but i have model: Honor7 Premium (PLK-L01)
Hi,
what did you expect? If you wipe de system partition then obviously the operating system is gone.
What you need to do is to download the full stock rom of your phone somewhere on the internet (needrom.com for instance if available).
You need to take the closest version of your old system and also the same technical name (PLK-UL00).
For instant if you were already on Android 6.0, you can no longer use a stock rom of Android 5.x.
When you have that full stock rom on your computer, you need to use multi-tools and use the unbrick option. Meaning you will be asked to extract the most important img files from the stock rom and to put them into a specified folder. The tool will then restore that rom on the partition file.
Kind reg,
I had android lollipop 5.0.2. Is it possible that i install the backup file of any other person's honor 7 PLK-UL00 running same android?
Hi,
please have a look there and use the stock rom that fits with your model and version.
https://yadi.sk/d/ZD8hXFjenRFHf
Kr,
how do i flash an UPDATE. APP file?
Create folder called dload on your SDCard and copy Update.app file to your SDCard inside that "dload" folder.
Then shutdown your device and use 3-Button method(Vol- & Vol+ & Power button) to boot that to recovery, that should start installing "recovery" file what is that Update.app inside dload folder.
Sent from my PLK-L01 using XDA-Developers mobile app
i don't know but the 3-button method is not working. When i do so, it boots to the recovery and nothing happens. Anyways, i have copied the dload folder with update.app file to the sdcard.
Use Multi-Tools available in the forum. There is a little app where you will be able to extract all required files from the file update.app.
Then in multi-tools use unbrick option and it will install the stock rom correctly. ++
http://forum.xda-developers.com/honor-7/general/honor-7-multi-tool-t3281176
Thank you!!!!! Sebastien_be and everyone to help me... It worked very well.. Thank u guys so much for the help...
Hello everyone
I hope somebody can help me. I have a Huawei y6 scc-u21 that I need to fix. I have downloaded a firmware flash file to reflash the phone however, after doing so, I found that the gapps are not installed. I tried to download and install every update but still I did not have gapps installed.
Also, I noticed that after flashing and everytime I do a factory reset, the phone would not prompt me to a setup process and just automatically goes to the normal interface. Some settings are missing too.
Please help. Without GAPPS this phone is basically useless. Doesn't even get a signal even though a SIM card is inserted.
Thanks.
I had the same problem.. here is what i do to solve it:
1- download u21 cm2 backup file from here:
http://www.mobilekse.com/2018/09/huawei-y6-scc-u2131-all-file-firmware.html?m=1
2. Extract it with 7zip.
3 download an sd card update "update.app".
4. install the update with sd card.
5- extract the file with "huawei update extractor" and get "BOOT.img" , "ABOOT.img" and "CUST.img" rename them to lowercase and put them to the folder of the first firmware of step 1/
6- open qfil, select flat buit, select the programmer path from the firmware folder then select from the top: tools then partition manager.
7- select boot.img partition and with a right click select manage partition.
8- choose the boot.img extracted and replaced.
9- do the same for aboot.img and cust.img
10- the phone will exit this dump mode and you will find playstore, keyboard, notfications..
Ask me if you found anything not clear