Related
Hello guyz...I've a severe prob arise, I ve pattern lock in my Micromax Bolt A27, mistakely my small bro try to unlock by too many wrong attempts, due to this i can't unlock it now and also i forgot the gmail account which i ve used in this phone, now the problem is how i reset it , i'm unable to entre into recovery mode, where it is come......
I try Vol up+power, it goes to test mode and Vol down+power, it goes to Fast boot mode.....Plz help
imElectronica said:
Hello guyz...I've a severe prob arise, I ve pattern lock in my Micromax Bolt A27, mistakely my small bro try to unlock by too many wrong attempts, due to this i can't unlock it now and also i forgot the gmail account which i ve used in this phone, now the problem is how i reset it , i'm unable to entre into recovery mode, where it is come......
I try Vol up+power, it goes to test mode and Vol down+power, it goes to Fast boot mode.....Plz help
Click to expand...
Click to collapse
Hi,
Have you find any answer on the same. Same problem arises on my friend's phone and unable to open the same.
tushar.mokal said:
Hi,
Have you find any answer on the same. Same problem arises on my friend's phone and unable to open the same.
Click to expand...
Click to collapse
Required
1.Android Multi Tool - Download
Android Multi Tool From http://www.4shared.com/zip/_uFK0h1g/Android_Multi_tool.html
2.Fastboot Driver - Download Driver
From http://www.4shared.com/zip/swEfExDb/android_usb_driver.html
Steps To Hard Reset
1.Open And Re-insert The Battery
2.Take The Sim Card And Sd Card Out
3.Install The Fastboot Driver On Your
Pc
4.Press And Hold Volume Down +
Power Key For 20-30 Seconds.
5.Look For Warning Logo On Screen.
6.Now Open The Android Multi Tool
7.Open Tool And Press “8” And Enter
To Wipe Data / Factory Reset.
8.After Format Remove Battery And
Reinsert Battery.
9.Power On The Handset.
solution to boot into recovery
you can boot into recovery by just using android multitoolkit..
very simple but working
switch off your phone
assumed you have installed all pc drivers or use moborobo
now connect your phone by pc
open multitoolkit
press 0
then type adb reboot recovery
you will boot into recovery or try again and again
~Unify~ said:
Required
1.Android Multi Tool - Download
Android Multi Tool From http://www.4shared.com/zip/_uFK0h1g/Android_Multi_tool.html
2.Fastboot Driver - Download Driver
From http://www.4shared.com/zip/swEfExDb/android_usb_driver.html
Steps To Hard Reset
1.Open And Re-insert The Battery
2.Take The Sim Card And Sd Card Out
3.Install The Fastboot Driver On Your
Pc
4.Press And Hold Volume Down +
Power Key For 20-30 Seconds.
5.Look For Warning Logo On Screen.
6.Now Open The Android Multi Tool
7.Open Tool And Press “8” And Enter
To Wipe Data / Factory Reset.
8.After Format Remove Battery And
Reinsert Battery.
9.Power On The Handset.
Click to expand...
Click to collapse
I am not able to install any of these software..This is not working...pls suggest further....thank you
Pooja Gajera said:
I am not able to install any of these software..This is not working...pls suggest further.
Click to expand...
Click to collapse
Use Pc to install the both program, then try...
~Unify~ said:
Use Pc to install the both program, then try...
Click to expand...
Click to collapse
of course I used PC but it's not working...suggest other soltion pls
ok guys, this is the easiest method for u guys who own a320y (ds) , maybe works with a320f version.
i have read many threads here according to gaining root for this device, but i got problem with twrp after flashing rom with odin. twrp cant mount /data
okay, here is the solution for u guys who dont have external sd card.
(READ IT CAREFULLY)
1. Download stock firmware related to your device (in this case, a320y/DS. but i think i t will working fine for a320f version)
2. Download Latest odin version from here https://odindownload.com/, and intall on your pc
3. Make sure u have adb installed on your pc, and also have samsung usb driver installed too. u can find it here
4. connect your device to pc on download mode (hold volume down , home, and power button until you see blue screen and press volume up button to go to download mode)
5. extract your firmware you download wherever you want.
6. open odin and you will see your device there. (something like 0:[com6])
7. choose the file you extracted (AP - AP , CSC - HOME CSC , BL - BL , CP - CP) , then un-tick the auto-reboot.
8. press start.
----------------------------------
9. when its done, disconnect your device, and connect it again.
10. press reset on odin
11. press ap button and select twrp file (.tar) = u can download twrp for our device here
12. untick auto reboot option again
13. press start.
---------------------------------
14.. when its done, force restart your device by pressing and hold vol down , home , power button until the screen is gone black. and the device will reboot to system.
---------------------------------
15. finish the setup for the first time, and enable the developer setting (go to about phone, software information and press build number 5-10 times)
16. press back button 2 times, and u will see developer option on the lowest screen.
17. go to developer option and enable OEM UNLOCK, disable auto update system, ENABLE USB DEBUGGING. see your phone screen, it will asking for usb debugging authorization. press yes
18. now go back to TWRP turning off your device, after the screen goes off, hold volume up, home button, and power button until u get inside twrp again.
19. download magisk zip here
20. press advanced button, and press sideload and enable it.
21. disconnect and reconnect your device to pc.
22. open CMD (win + R , and type CMD), now in command screen, type this
adb sideload yourdownloaddirectory/magisk-v16.0.zip
Click to expand...
Click to collapse
23. after the progress done, u can reboot your phone.
24. download magisk manager here and install on your phone, give permission to install the .apk file.
25. now your device is ROOTED, WITHOUT ANY LAG ON LOCKSCREEN, AND WITHOUT ANY PROBLEM WITH TWRP RECOVERY.
==i make this tutorial because i myself had facing the problem when installing twrp. after flashing the firmware and straight reboot to twrp, the /data folder is still mounted, but after reboot to system and back to twrp, it cant mount the /data anymore. so i need to wipe the data again and again. but after installing twrp and flashing the magisk.zip file , the problem with /data is gone. i dont need to wipe /data anymore :victory: and some people are facing the lag while unlocking screen with secured lockscreen (pattern/password) after rooting using chainfire.zip . but with magisk.zip , the lagg is gone forever ==
sorry for my english, but i think u guys can understand it.
Feel Free to ask me if u guys facing problem with this tutorial, i will help!
because many people here are helped me a lot for every problem i had, so i think this time is my time to helping others too
Is this guide for Nougat or Oreo?
AK2H said:
Is this guide for Nougat or Oreo?
Click to expand...
Click to collapse
ah yeah sorry, this tutorial is for Nougat version.
have not try oreo because still not released for my country.
Can I still use fingerprint to unlock the screen when rooting this way?
leo31 said:
ok guys, this is the easiest method for u guys who own a320y (ds) , maybe works with a320f version.
i have read many threads here according to gaining root for this device, but i got problem with twrp after flashing rom with odin. twrp cant mount /data
okay, here is the solution for u guys who dont have external sd card.
(READ IT CAREFULLY)
1. Download stock firmware related to your device (in this case, a320y/DS. but i think i t will working fine for a320f version)
2. Download Latest odin version from here https://odindownload.com/, and intall on your pc
3. Make sure u have adb installed on your pc, and also have samsung usb driver installed too. u can find it here
4. connect your device to pc on download mode (hold volume down , home, and power button until you see blue screen and press volume up button to go to download mode)
5. extract your firmware you download wherever you want.
6. open odin and you will see your device there. (something like 0:[com6])
7. choose the file you extracted (AP - AP , CSC - HOME CSC , BL - BL , CP - CP) , then un-tick the auto-reboot.
8. press start.
----------------------------------
9. when its done, disconnect your device, and connect it again.
10. press reset on odin
11. press ap button and select twrp file (.tar) = u can download twrp for our device here
12. untick auto reboot option again
13. press start.
---------------------------------
14.. when its done, force restart your device by pressing and hold vol down , home , power button until the screen is gone black. and the device will reboot to system.
---------------------------------
15. finish the setup for the first time, and enable the developer setting (go to about phone, software information and press build number 5-10 times)
16. press back button 2 times, and u will see developer option on the lowest screen.
17. go to developer option and enable OEM UNLOCK, disable auto update system, ENABLE USB DEBUGGING. see your phone screen, it will asking for usb debugging authorization. press yes
18. now go back to TWRP turning off your device, after the screen goes off, hold volume up, home button, and power button until u get inside twrp again.
19. download magisk zip here
20. press advanced button, and press sideload and enable it.
21. disconnect and reconnect your device to pc.
22. open CMD (win + R , and type CMD), now in command screen, type this
23. after the progress done, u can reboot your phone.
24. download magisk manager here and install on your phone, give permission to install the .apk file.
25. now your device is ROOTED, WITHOUT ANY LAG ON LOCKSCREEN, AND WITHOUT ANY PROBLEM WITH TWRP RECOVERY.
==i make this tutorial because i myself had facing the problem when installing twrp. after flashing the firmware and straight reboot to twrp, the /data folder is still mounted, but after reboot to system and back to twrp, it cant mount the /data anymore. so i need to wipe the data again and again. but after installing twrp and flashing the magisk.zip file , the problem with /data is gone. i dont need to wipe /data anymore :victory: and some people are facing the lag while unlocking screen with secured lockscreen (pattern/password) after rooting using chainfire.zip . but with magisk.zip , the lagg is gone forever ==
sorry for my english, but i think u guys can understand it.
Feel Free to ask me if u guys facing problem with this tutorial, i will help!
because many people here are helped me a lot for every problem i had, so i think this time is my time to helping others too
Click to expand...
Click to collapse
Do I have to perform steps 1-8 if I'm already in Nougat?
Has someone tried this on an SM-A320FL with Android 8.0 and SD card inserted?
simple_s said:
Has someone tried this on an SM-A320FL with Android 8.0 and SD card inserted?
Click to expand...
Click to collapse
It's works fine.
This process will wipe your entire data make sure to backup (use lg bridg )
Detailed video:-
1. Unlock BootLoader And Root (https://forum.xda-developers.com/t/how-to-unlock-bootloader-and-root-lg-g8x-video-guide.4198267/)
2. Download the required files
TWRP : https://www.mediafire.com/file/oxqeugznv0z1pyb/Twrp%28g8x%29.zip/file Magisk :https://www.mediafire.com/file/feb5paddqj5lmun/Magisk-v20.4.zip/file Disable Dm-Verity : https://www.mediafire.com/file/j6b6mik4opn5iib/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip/file
3.Install the TWRP flash module in Magisk Manager, remember "Don't press restart" . , install Magisk.zip again via Magisk manager
4. install Magisk.zip again via Magisk manager
5. Power off the device => press and hold vol Down and Power when YOu feel the vibration Leave the Power =>at the time when you see
the LG G8x logo press the power Button 2 or 3 times(you should not leave the vol down button while this process)
OR wacth this if You didnt understand (wtach the Video)
Note: You may thing to use "adb reboot recovery" but This is LG (We make things Harder)( touch will not work so Use Button combination)
6. You will be in Reset menu press "yes" (it will boot into Twrp)
7. It will ask Pin to decrypt data (press cancel => Wipe =>Formate Data and also make a factory reset)
8.Copy the Disable Dm-Verity.zip to internal storage and Go to Install => select the Disable Dm-Verity.zip and reboot the system
9. Twrp installed successfully..
Ultra noob ? Don't worry Watch this ;-
[email protected] said:
This process will wipe your entire data make sure to backup (use lg bridg )
Detailed video:-
1. Unlock BootLoader And Root (https://forum.xda-developers.com/t/how-to-unlock-bootloader-and-root-lg-g8x-video-guide.4198267/)
2. Download the required files
TWRP : https://www.mediafire.com/file/oxqeugznv0z1pyb/Twrp%28g8x%29.zip/file Magisk :https://www.mediafire.com/file/feb5paddqj5lmun/Magisk-v20.4.zip/file Disable Dm-Verity : https://www.mediafire.com/file/j6b6mik4opn5iib/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip/file
3.Install the TWRP flash module in Magisk Manager, remember "Don't press restart" . , install Magisk.zip again via Magisk manager
4. install Magisk.zip again via Magisk manager
5. Power off the device => press and hold vol Down and Power when YOu feel the vibration Leave the Power =>at the time when you see
the LG G8x logo press the power Button 2 or 3 times(you should not leave the vol down button while this process)
OR wacth this if You didnt understand (wtach the Video)
Note: You may thing to use "adb reboot recovery" but This is LG (We make things Harder)( touch will not work so Use Button combination)
6. You will be in Reset menu press "yes" (it will boot into Twrp)
7. It will ask Pin to decrypt data (press cancel => Wipe =>Formate Data and also make a factory reset)
8.Copy the Disable Dm-Verity.zip to internal storage and Go to Install => select the Disable Dm-Verity.zip and reboot the system
9. Twrp installed successfully..
Ultra noob ? Don't worry Watch this ;-
Click to expand...
Click to collapse
Ultra noob
lol!
can't work.
my g8x is Unlock BootLoader And Root with 20e ca op
@[email protected]
Could you use like Mega GDrive to mirror TWTP because MediaFire link is dead.
There is a fixed version by mr zhu on telegram v50 group. Search the notes.
siulmagic said:
There is a fixed version by mr zhu on telegram v50 group. Search the notes.
Click to expand...
Click to collapse
Which one is it? Twrpg8 or korean beta
Search channel for twrp-installer-v3.3.1-g8x-ab
siulmagic said:
Search channel for twrp-installer-v3.3.1-g8x-ab
Click to expand...
Click to collapse
AFter format data and factory reset and flashing dm verity it bootloops
Awesomeslayerg said:
AFter format data and factory reset and flashing dm verity it bootloops
Click to expand...
Click to collapse
you have to flash twrp with magisk manager while in android, then magisk again while in android without rebooting, then you boot to twrp and flash disable dm verity, else you will have a broken boot.img
Ive done that still bootloops USA Version.
@[email protected], can you please compile OrangeFox recovery for LG G8x?
[email protected] said:
This process will wipe your entire data make sure to backup (use lg bridg )
Detailed video:-
1. Unlock BootLoader And Root (https://forum.xda-developers.com/t/how-to-unlock-bootloader-and-root-lg-g8x-video-guide.4198267/)
2. Download the required files
TWRP : https://www.mediafire.com/file/oxqeugznv0z1pyb/Twrp%28g8x%29.zip/file Magisk :https://www.mediafire.com/file/feb5paddqj5lmun/Magisk-v20.4.zip/file Disable Dm-Verity : https://www.mediafire.com/file/j6b6mik4opn5iib/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip/file
3.Install the TWRP flash module in Magisk Manager, remember "Don't press restart" . , install Magisk.zip again via Magisk manager
4. install Magisk.zip again via Magisk manager
5. Power off the device => press and hold vol Down and Power when YOu feel the vibration Leave the Power =>at the time when you see
the LG G8x logo press the power Button 2 or 3 times(you should not leave the vol down button while this process)
OR wacth this if You didnt understand (wtach the Video)
Note: You may thing to use "adb reboot recovery" but This is LG (We make things Harder)( touch will not work so Use Button combination)
6. You will be in Reset menu press "yes" (it will boot into Twrp)
7. It will ask Pin to decrypt data (press cancel => Wipe =>Formate Data and also make a factory reset)
8.Copy the Disable Dm-Verity.zip to internal storage and Go to Install => select the Disable Dm-Verity.zip and reboot the system
9. Twrp installed successfully..
Ultra noob ? Don't worry Watch this ;-
Click to expand...
Click to collapse
Twrp file has been removed please i want link to download twrp anyone help me i want link to download twrp for lg g8x
Cyrus05 said:
Twrp file has been removed please i want link to download twrp anyone help me i want link to download twrp for lg g8x
Click to expand...
Click to collapse
Purposely removed since expected perfection is not yet attained with that. Be in touch with the telegram group so that you may be updated regarding the development of the bl unlock, rooting and further custom ROM for the LG G8X...
LG Mobiles India 🇮🇳
Political Discussion, Obscene material/words, Selling, Fraudulent link posting will lead to Ban SHARING COPYRIGHT CONTENT & PIRACY NOT ALLOWED, it leads to REPORT & BLOCK Photography Group: @lgg8xphotography OT Group: @LG_G8X_OffTopic
t.me
Join the party
Can someone provide me with their LG G8X G850UM dump because my device is in a kernal panic and tells me to enter sahara mode?
Can't get to fastboot or recovery.
[email protected] said:
This process will wipe your entire data make sure to backup (use lg bridg )
Detailed video:-
1. Unlock BootLoader And Root (https://forum.xda-developers.com/t/how-to-unlock-bootloader-and-root-lg-g8x-video-guide.4198267/)
2. Download the required files
TWRP : https://www.mediafire.com/file/oxqeugznv0z1pyb/Twrp%28g8x%29.zip/file Magisk :https://www.mediafire.com/file/feb5paddqj5lmun/Magisk-v20.4.zip/file Disable Dm-Verity : https://www.mediafire.com/file/j6b6mik4opn5iib/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip/file
3.Install the TWRP flash module in Magisk Manager, remember "Don't press restart" . , install Magisk.zip again via Magisk manager
4. install Magisk.zip again via Magisk manager
5. Power off the device => press and hold vol Down and Power when YOu feel the vibration Leave the Power =>at the time when you see
the LG G8x logo press the power Button 2 or 3 times(you should not leave the vol down button while this process)
OR wacth this if You didnt understand (wtach the Video)
Note: You may thing to use "adb reboot recovery" but This is LG (We make things Harder)( touch will not work so Use Button combination)
6. You will be in Reset menu press "yes" (it will boot into Twrp)
7. It will ask Pin to decrypt data (press cancel => Wipe =>Formate Data and also make a factory reset)
8.Copy the Disable Dm-Verity.zip to internal storage and Go to Install => select the Disable Dm-Verity.zip and reboot the system
9. Twrp installed successfully..
Ultra noob ? Don't worry Watch this ;-
Click to expand...
Click to collapse
twrp works great on my g8x except I have no touch screen capabilities in twrp recovery....i have been using a wireless mouse to man the buttons. Anything i can do to regain touch features?
#Rooty_Mikes# said:
twrp works great on my g8x except I have no touch screen capabilities in twrp recovery....i have been using a wireless mouse to man the buttons. Anything i can do to regain touch features?
Click to expand...
Click to collapse
U need to use button combo to enter the recovery. And touch will work
[email protected] said:
U need to use button combo to enter the recovery. And touch will work
Click to expand...
Click to collapse
I tried for an hour to get the button combo right and couldn't figure it out. Im coming from Samsung and varients and Lg is a new world to me. Whats the bu
[email protected] said:
U need to use button combo to enter the recovery. And touch will work
Click to expand...
Click to collapse
Was alittle trickie with the factory reset screen but i figured it out, thank you very much
Any update?
Reupload files please.
LexxiHI said:
Any update?
Reupload files please.
Click to expand...
Click to collapse
What do you need?
Latest working TRWP for LG G8X
This thread is assuming you are on stock ROM and have Android and Samsung drivers on your computer.
Step 0: ALWAYS PREPARE STOCK FIRMWARE AS BACKUP FOR ODIN
...........Download your firmware according to your region
...........Also make sure you are on the latest firmware on your phone
Step 1: Unlocking bootloader [important]
...........step a: Enable Developer options
...........step b: Enable OEM unlocking [important]
...........step c: Power off the phone
...........step d: Connect the USB cable. While connecting, press and hold Vol+ and Vol-
...........step e: Press and hold Vol+ to enter device unlock mode. Press Vol+ again to
...................confirm. This will erase ALL data on your phone (including internal
...................storage) and reboot. You will now be greeted with a yellow warning.
...................This is normal everytime you reboot
...........step f: Complete the setup, enable Developer options again and look for OEM
...................unlocking option. It should be greyed out [important]. If not, just
...................connect to the internet for 10 minutes and it will reappear. Again,
...................it should be greyed out [important]
Step 2: Installing TWRP [mandatory]
...........step a: Download TWRP.tar, VBMetaDisabler.tar, MultiDisabler.zip, and
...................DisableDMVerity.zip. Put the .zips on your sdcard
...........step b: Power off the phone
...........step c: Connect the USB cable. While connecting, press and hold Vol+ and Vol-
...........step d: Press Vol+ once to enter Download mode
...........step e: On Odin, disable Auto Reboot [important], add TWRP.tar on AP, then
...................press Start.
...........step f: Once completed, remove USB.
...........step g: Press and hold Power and Vol- to turn off. IMMEDIATELY plug back USB
...................while pressing and holding Vol+ and Vol-. DO NOT LET THE PHONE RESET
...................OR YOU WILL HAVE TO DO THIS ALL OVER AGAIN
...........step h: When in Download mode again, go to Odin and add VBMetaDisabler.tar on
...................AP then Start.
...........step i: Once completed, remove USB.
...........step j: Press and hold Power and Vol- to turn off. Let go then IMMEDIATELY
...................plug back USB while pressing and holding Vol+ and Power to enter
...................recovery. At this point there will be a red warning. Don't release the
...................buttons until the red warning disappears. The device will reboot twice.
...........step k: Once inside TWRP, press Wipe then Format Data then type yes.
...........step l: Press home, press Install then select MultiDisabler.zip, Add more
...................Zips, select DisableDMVerity.zip, then Swipe to confirm Flash
...........step m: Press home, Reboot, Recovery
Step 3: Installing GSIs [repeatable]
...........step a: Download ChonDoeFlasher.zip, GSI of your choice, KakarotKernel.zip,
...................GApps.zip (optional), and add-ons of your choice. Once you
...................downloaded your GSI (.xz format), extract its .img and rename it to
...................system.img. Put the .img on your sdcard along with the other .zips. It
...................should be all on the same folder
...........step b: On TWRP, Press Wipe, Advanced Wipe, tick Dalvik, Data, and Cache,
...................Swipe to Wipe, then press home
...........step c: Press Install, select ChonDoeFlasher.zip, Add more Zips,
...................KakarotKernel.zip, Add more Zips, GApps.zip (if needed), Add more Zips,
...................your add-ons, then Swipe to Flash
...........step d: Once finished, press home, Wipe, Format Data, type yes
...........step e: Press Reboot System and welcome to the club
TROUBLEHOOTING
...........If you ever get stuck in a bootloop (Samsung logo appearing again and again) in
...........Step 1 or Step 2, wait until the cycle stops then hold Vol+ and Vol- while
...........connecting USB. On your PC, extract your firmware .zip. It should contain 5 .md5
...........files. On Odin, load these files according to their buttons (AP file in AP
...........button, BL file in BL button, CP file in CP button, CSC file in CSC
...........button). HOME_CSC file isn't needed and just leave the USERDATA button blank.
...........Enable Auto-reboot and press Start. Once it's finished, repeat step f of step 1.
...........If you ever get stuck in a bootloop in Step 3, wait until the cycle stops then
...........press and hold Vol+ and Power while connecting USB. Don't release the buttons
...........until the red warning disappears. It will take you back to TWRP. There, make the
...........necessary steps to fix the problem, which varies from GSI to GSI or from the
............zips that you flashed.
CREDITS ...@neel0210 for KakarotKernel
...........@ShaDisNX255 for OrangeFoxRecovery
...........@RealVelosh for TWRP
...........@redymedan for his YouTube guides
...........@AndroidHowTo for his ChonDoeFlasher.zip
...........Samsung and Google for sources
Am I missing something? TWRP for the 5G version doesn't exist yet, neither OrangeFoxRecovery. The link redirects you to the 4G version of the A52, not the 5G version. Using the 4G version of TWRP on the 5G version will probably cause bootloop. It makes this forum totally irrelevant, for now at least.
Ok, so for those who wanted to try it, I tried it by myself just to make sure I am not missing anything. The results:
Nothing happens when I tried to boot to recovery after installing both of the files(twrp and VBMetadisabler), worse than that, it actually caused my phone to brick, it just showed a weird menu that looks very similar to the download mode except it has black screen with samsung's logo and the red warning. I reflashed my stock firmware and tried again. I did it for 5 times, nothing works. I read the instructions very carefully(even tho there is not much detail that you can miss), I am having the same result. My conclusion is that this TWRP image which was made for the 4G version of the A52, CANNOT be used for the 5G version.
GiulianoB said:
Ok, so for those who wanted to try it, I tried it by myself just to make sure I am not missing anything. The results:
Nothing happens when I tried to boot to recovery after installing both of the files(twrp and VBMetadisabler), worse than that, it actually caused my phone to brick, it just showed a weird menu that looks very similar to the download mode except it has black screen with samsung's logo and the red warning. I reflashed my stock firmware and tried again. I did it for 5 times, nothing works. I read the instructions very carefully(even tho there is not much detail that you can miss), I am having the same result. My conclusion is that this TWRP image which was made for the 4G version of the A52, CANNOT be used for the 5G version.
Click to expand...
Click to collapse
Okay my fault for not testing, will mark this thread as incomplete for now until a proper recovery for 5G arrives.
axljohn said:
Okay my fault for not testing, will mark this thread as incomplete for now until a proper recovery for 5G arrives.
Click to expand...
Click to collapse
Thank you very much, **** happens. We are humans, we all do mistakes
I'm now doing it in my SM-A525F 4G. I'll let you know what happened next.
It worked! Very nice I got rid of knox
axljohn said:
Okay my fault for not testing, will mark this thread as incomplete for now until a proper recovery for 5G arrives.
Click to expand...
Click to collapse
Yeah so what gives is the A52 5g cursed or something?? Ive never seen such a popular device nit get support of custom roms unless of course the bootloader is permanently locked.
Whats Samsung not telling us??!!
As I can access this recovery, the bootloader is supposed to be locked.
<img src='https://i.postimg.cc/JzjshZvM/IMG-20210916-133510.jpg' border='0' alt='IMG-20210916-133510'/></a>
Installed drivers: ADB, OnePlus Nord 2 5g, Mediatek, on Windows 10.
How to access internal storage from PC or is there some other way?
bootloader should work... turn off the phone, and start by holding vol down and power.... then fastboot flashing unlock again
Power button and volume down, go directly to recovery.
Power button and volume up, go straight to the first picture.
Turn on, direct to first picture.
power button + vol down + vol up?
Thanks, I see that I have the bootloader unlocked. I'm going to do some tests to see if I can get the phone back.
Problem solved, phone operational.
Sorry, I use google translator.
I had the bootloader unlocked, root installed and I lost wifi, bluetooth, I tried to fix and in a bad move I ordered the bootloader to close, leaving the phone locked.
Fixed bootloader unlocked again, now I have factory phone.
Thanks for the help.
I have the same issue. Whatever I do I get the warning screen you showed on your first post. How did you solve it?
I am able to go to recovery by using power + volume down. But with power + volume down + volume up, the phone does nothing. Just black screen. It's like it tries to go to fastboot but it can't (probably the fastboot is broken?) So I just can get to the recovery...How did you fix it? Is there any way to flash everything from scratch, e.g using something like Odin?
simultaneous volume down-up, + then power, bootloader enters my phone.
flashing unlock bootloader and it comes back to life.
I was able to boot the bootloader (fastboot) but not with the same approach as you. If I did the same thing as you, as I said, I got a black screen.
EDIT: For the record, it looks like the problem was the fact that I had the phone connected to the computer with the USB cable. I removed the cable and then I could enter the bootloader with the mentioned key combination without a problem.
If it does not work for you: try without the USB cable!
edulcorante1 said:
Проблема решена, телефон в рабочем состоянии.
Извините, я использую переводчик Google.
У меня был разблокирован загрузчик, установлен рут, и я потерял Wi-Fi, bluetooth, я попытался исправить, и в плохом движении я приказал закрыть загрузчик, оставив телефон заблокированным.
Исправлен загрузчик снова разблокирован, теперь у меня заводской телефон.
Спасибо за помощь.
Click to expand...
Click to collapse
привет, у меня тоже не работает вай-фай бт и камера, как исправить?