As I can access this recovery, the bootloader is supposed to be locked.
<img src='https://i.postimg.cc/JzjshZvM/IMG-20210916-133510.jpg' border='0' alt='IMG-20210916-133510'/></a>
Installed drivers: ADB, OnePlus Nord 2 5g, Mediatek, on Windows 10.
How to access internal storage from PC or is there some other way?
bootloader should work... turn off the phone, and start by holding vol down and power.... then fastboot flashing unlock again
Power button and volume down, go directly to recovery.
Power button and volume up, go straight to the first picture.
Turn on, direct to first picture.
power button + vol down + vol up?
Thanks, I see that I have the bootloader unlocked. I'm going to do some tests to see if I can get the phone back.
Problem solved, phone operational.
Sorry, I use google translator.
I had the bootloader unlocked, root installed and I lost wifi, bluetooth, I tried to fix and in a bad move I ordered the bootloader to close, leaving the phone locked.
Fixed bootloader unlocked again, now I have factory phone.
Thanks for the help.
I have the same issue. Whatever I do I get the warning screen you showed on your first post. How did you solve it?
I am able to go to recovery by using power + volume down. But with power + volume down + volume up, the phone does nothing. Just black screen. It's like it tries to go to fastboot but it can't (probably the fastboot is broken?) So I just can get to the recovery...How did you fix it? Is there any way to flash everything from scratch, e.g using something like Odin?
simultaneous volume down-up, + then power, bootloader enters my phone.
flashing unlock bootloader and it comes back to life.
I was able to boot the bootloader (fastboot) but not with the same approach as you. If I did the same thing as you, as I said, I got a black screen.
EDIT: For the record, it looks like the problem was the fact that I had the phone connected to the computer with the USB cable. I removed the cable and then I could enter the bootloader with the mentioned key combination without a problem.
If it does not work for you: try without the USB cable!
edulcorante1 said:
Проблема решена, телефон в рабочем состоянии.
Извините, я использую переводчик Google.
У меня был разблокирован загрузчик, установлен рут, и я потерял Wi-Fi, bluetooth, я попытался исправить, и в плохом движении я приказал закрыть загрузчик, оставив телефон заблокированным.
Исправлен загрузчик снова разблокирован, теперь у меня заводской телефон.
Спасибо за помощь.
Click to expand...
Click to collapse
привет, у меня тоже не работает вай-фай бт и камера, как исправить?
Related
Hey,
I have a problem. My tablet is SGP312 has Cyanogenmod 11 (FXP247 - Android 4.4). It was bricked when I type in Terminal:
Code:
su
reboot recovery
Was turned off and will not turn on at all.
Power button = NOTHING
Power button + Vol(+) 3/10/25 secs = NOTHING
Power button + Vol(-) 3/10/25 secs = NOTHING
Power button + Voll(+) + USB = NOTHING
No LED light, It's literally a paperweight. I can't even put it into Flashmode.
Please help me!
Anyone can help me?
WeRunTheNite said:
Anyone can help me?
Click to expand...
Click to collapse
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
hassanman1997 said:
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
Click to expand...
Click to collapse
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Driver
WeRunTheNite said:
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Click to expand...
Click to collapse
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
hassanman1997 said:
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
Click to expand...
Click to collapse
I have a similar problem, I've flashed plenty of devices before, never briked a thing.
By unloking the bootloader the data partition of my brand new tablet Z went corrupted. I've tried to flash several firmware but none was succesfull (couldn't format data...), and finally it get totally bricked! no light, nothing... I was not even able to put it in flash mode (no light ever!).
I've tried after a while, I've read with some other Xperia devices, it would be possible to recover it after some time, by letting the battery die, then use some rubber trick to keep vol- pressed... you can find it in XDA forums what I'm talking about. However after a month my tablet was still dead. no light, no nothing!
I've sent it to warranty and the just said that "an alternative firmware was flashed" (voiding the warranty) "and has rendered the logic board unusable".... and they have to order a new unit!!
I feel so surprise that even the cheapest chinese tablet have an harware mode that allow to reflash and resuscitate it back to factory... even if the firmware is completely screwed, and a 600$ tablet for a simple bootloader unlock got totaly bricked.
I wonder if there is an "hardware" way to recover the tablet (I saw it's pretty easy to tear down the Xperia tablet Z), by directly accessing the NAND... or by accessing some PIN (well I know sony would have not leaked such information)
Hello guys,
I have a problem with mai Sony Xperia Z Ultra.
I installed a new softwere on my phone and it don't turn on!! I can't enter in recovery mod.
When i try to turn on the only thing who work is that red LED.
Wath can I do ?
more information is needed
What did you install?
How did you install it?
Have you backed up the TA?
Have you unlocked the bootloader?
If you reset the device (power and vol up) and then connect to a PC while holding the vol up key do you get a blue LED?
Replay
I had installed CM-12 with Android 5.0.
I installed it with Recovery mod.
Yes i have bootloader unlocked+root and yes when I connect to PC i have a blue LED and i did a backup before this
extazz_122 said:
I had installed CM-12 with Android 5.0.
I installed it with Recovery mod.
Yes i have bootloader unlocked+root and yes when I connect to PC i have a blue LED and i did a backup before this
Click to expand...
Click to collapse
Download flashtool http://flashtool.net and read up on how to use it
Download a FTF for your version from http://forum.xda-developers.com/xpe...tf-depository-sony-firmware-releases-t2829387
Charge the phone for several hours on a wall charger
Run flashtool
select flashmode
select FTF
press flash button
wait for instructions
connect ZU to PC while holding the vol. down key
wait for the flash to finish.
That should get you back to stock
Link dosn't work
I've found a way to boot directly into bootloader/fastboot mode.
Press simultaniously the Vol+ and the power button until the red light lit up. Then instantly leave the two buttons and press the Vol- button until you see the fastboot menu. You're done!!
This trick to boot into Stock Bootloader/recovery has been known for years and is used on many different Android device
Still, it's great that you participate in this forum !
Boutchoo said:
This trick to boot into Stock Bootloader/recovery has been known for years and is used on many different Android device
Still, it's great that you participate in this forum !
Click to expand...
Click to collapse
I see you don't get it. Up to now the only way to get into fastboot was via "adb reboot bootloader". Or from a successfully installed TWRP.
The "for years" known combinations will get you only into Recovery (Power + Vol up), FTM (Power + Vol down), or into EDL respective the useless DFU mode (Power + Vol up + Vol down). In case you've killed your recovery and your bootimg you now have a additional option to come back to a functional system. Especially for the A2017g with the useless DFU mode.
Can anyone with bricked A2017G confirm?
Controllerboy said:
Can anyone with bricked A2017G confirm?
Click to expand...
Click to collapse
Confirmed NOT WORKING .
It doesn't matter if it's working or not. Thanks for the info anyway.
Neither stock recovery nor fastboot will help if you're stuck in DFU mode for G model. You can't do anything to recover the device in neither mode. All what helps is previously had enabled "allow BL unlock" in developer options. This gives you the possibilty to flash a stock ROM from external SD card. It still needs to be aproved from a bricked "DFU" user!
Stoicho87 said:
Confirmed NOT WORKING .
Click to expand...
Click to collapse
Would you kindly tell us what is not working? Don't you see the menu? Or don't you know what to do with fastboot?
In case you managed it to get into fastboot the next step would be to get into edl by using this trick. -->
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292
@tron1, all this does not work. I tried cause I had a bricked (DFU) device. I needed to send it in for repair. And gues: they changed the motherboard.
Even the fastboot_edl results in "remote unknown command". Nearly all commands in fastboot for Axon 7 are disabled bei ZTE.
I will try if it's possible to reboot to edl with the fastboot from the unlock procedure from drakenfx.
forum.xda-developers.com/axon-7/how-to/guide-how-to-unlock-bootloader-stay-t3461165
ZTE crippled the loader in a bad ass way. But they left the flash command inside. So it should be possible to flash at least a working recovery to the system if you manage it to get into bootloader. As long as my phone is working I won't try it on it. So volunteers!!
Hint -->
fastboot flash <partition> [ <filename> ] write a file to a flash partition
fastboot erase <partition> erase a flash partition
I there a way recover such a bricked device?
I could only boot into bootloader. If i choose boot recovery the phone only shows a red light.
If i choose start its the same red light.
Or should i contact ZTE for a new phone?
Stoicho87 said:
Confirmed NOT WORKING .
Click to expand...
Click to collapse
I have bricked my Axon 7 several times this weekend, but new Qualcomm chipsets are unbrickable!!!!
1. There is a way to enter directly to EDL on most Qualcomm devices and works also in the Axon 7. Just ensure your phone is off, then press the three buttons at the same time. The red light will blink once, after that blink release the three buttons (you must be very quick releasing the buttons, otherwise the phone will turn on.
2. Plug your phone to your computer. Windows 10 should detect a new USB device QUSB_BULK without any warning message. Then you can use axon7tool to flash the original boot and recovery (stock or tenfar's signed TWRP).
After that, you will be able to enter into recovery, do a factory reset and then you will be able to restore de initial image from an SD formatted as FAT32 (no, exFAT is not supported by stock recovery) in case of stock recovery. Sideload will not work, always stop before finishing the transmission.
Oki, this is fine for you because you have the US version of the Axon the rest of the axon World is f..ed up with an useless so called DFU mode. Happy Birthday for your Axon.
Sent from my ZTE A2017G using XDA Free mobile app
Oki said:
... unbrickable!!!! ...
... ress the three buttons at the same time. The red light will blink once, after that blink release the three buttons (you must be very quick releasing the buttons, o ...
... Then you can use axon7tool to flash the original boot and recovery (stock or tenfar's signed TW ...
Click to expand...
Click to collapse
That did the trick. Thanks
Any idea on why when i tried to enter bootloader mode on my Axon 7 (that i received 1 week ago), it stays on ZTE logo and nothing else happens... What is weirder is that there's a red light and my computer detect it when i do "fastboot devices" but i can't unlock the bootloader...
I tried to downgrade on B02 firmware and nothing... i'm beyond going insane right now.... :-/ It's like ZTE blocked on purpose the access to the bootloader mode...
I know that this thread is more of same, but I didn't found any answer that helps me.
The story is:
My Xperia 2363 M4 Aqua Dual recived a call and I lost it. Then when I took it and turn on the screen to see the caller, my device just restarted and went to the purple waves screen, but stuck there the system didn't start. Since this, the only thing that phone do is that, it never starts the android system.
I've tried everything that I read
So the things I've tried is:
Restart the phone by holding the power + vol up buttons
Turn off the phone by holding the power + vol up buttons until 3 vibes
Turn on the phone holdin the vol up + vol down buttons
Reinstall software by xperia companion but the software didn't start the process
reinstall software by flashtool but the device isn't found by the flashtool
connect the phone on pc holding vol up button
connect the phone on pc holding vol down button
connect the phone on pc holding vol up + vol down buttons
connect the phone holding all the buttons
the fastboot and bootloader modes don't enter and the pc says that usb device can't recognized by the windows.
I have no ideas of what i do
Can you help me?
Does it flash a blue screen briefly before restarting / crashing?
DarkerJava said:
Does it flash a blue screen briefly before restarting / crashing?
Click to expand...
Click to collapse
Thanks for reply. No, didn't flash a blue screen, it just restarted like when we hold the power +vol up buttons
And it not keep restartin, the phone turns on and stays on the waves screen. don't start the system so as don't restart.
If you device is not being recognized by you PC, Try fastbooting the device using a linux (Mint, what i used for similiar issue), it will hopefully recognize your device and you would be able to flash it.
sanjyot said:
If you device is not being recognized by you PC, Try fastbooting the device using a linux (Mint, what i used for similiar issue), it will hopefully recognize your device and you would be able to flash it.
Click to expand...
Click to collapse
Thank You, I'll try this.
sanjyot said:
If you device is not being recognized by you PC, Try fastbooting the device using a linux (Mint, what i used for similiar issue), it will hopefully recognize your device and you would be able to flash it.
Click to expand...
Click to collapse
I tried this one, but, is the phone that not enter on fastboot mode. I tried with my another devices and it worked well, but the M4 aqua, just refuse to enter in fastboot mode and only recharge the batt. to be more specifc, the green or blue lights don't lights
korkinova said:
I tried this one, but, is the phone that not enter on fastboot mode. I tried with my another devices and it worked well, but the M4 aqua, just refuse to enter in fastboot mode and only recharge the batt. to be more specifc, the green or blue lights don't lights
Click to expand...
Click to collapse
could you fix that problem bro?
advancel said:
could you fix that problem bro?
Click to expand...
Click to collapse
Unfortunately no. I couldn't fix this yet, it is because I' can't go fastboot mode on my device
have you any other suggestion?
no i have that problem by the way if you can fix the prob. then contact me pls
The other phone you tried was a Xperia?
And are you on Win8 or Win10 because if you are, you have to install the drivers in unsafe mode(Don't remember how it's really called).
Furthermore if you don't have anything important in the phone try flashing a new version of Android or the same but do a clean install I.E Wipe everything and leave like new by installing with Flashtool(unsafe mode too, because it needs drivers if you are on Win8>10 when installing)
Hi, i'd like to ask wheter is possible to flash and wipe a new realme 6 device. Long story short, this device was bought, a lockscreen password was set but the owner made a mistake during the imput (dunno how, maybe drugs) so she's completely locked out. Usb debugging is not enabled, nor oem hence i can't flash like i would usually do. This phone had a lifespan of less than 5 min and ofc the seller won't accept returns. Any advice?
Edit 1: I'm trying SP flash tool but requires the mt6785 scatter file which i can't find online nor can make it on my own as i would need the phone unlocked, if any pious soul could provide it i'd appreciate
1. Power off your phone
2. When your phone is switched off go into recovery by pressing Power button + Volume Down button at the same time.
3. In recovery first select language then you will have the option to Wipe the phone. Select wipe option then your phone will be formatted.
4. Relax while your phone gets wiped ?
Arneesh said:
1. Power off your phone
2. When your phone is switched off go into recovery by pressing Power button + Volume Down button at the same time.
3. In recovery first select language then you will have the option to Wipe the phone. Select wipe option then your phone will be formatted.
4. Relax while your phone gets wiped
Click to expand...
Click to collapse
Except that it asks for lockscreen password even in recovery mode. Can't wipe can't update, only turn off or reboot
Try asking their online customer service from realme website a solution.
ВОПРОС"Дженуас, сообщение: 83332201, член: 11045127""
Кроме того, что он просит пароль блокировки экрана даже в режиме восстановления. Не может стереть не может обновить, только выключить или перезагрузить
(/ЦИТАТА)
Точно такая ситуация , нашёл решение?