Hello guys,
I have a problem with mai Sony Xperia Z Ultra.
I installed a new softwere on my phone and it don't turn on!! I can't enter in recovery mod.
When i try to turn on the only thing who work is that red LED.
Wath can I do ?
more information is needed
What did you install?
How did you install it?
Have you backed up the TA?
Have you unlocked the bootloader?
If you reset the device (power and vol up) and then connect to a PC while holding the vol up key do you get a blue LED?
Replay
I had installed CM-12 with Android 5.0.
I installed it with Recovery mod.
Yes i have bootloader unlocked+root and yes when I connect to PC i have a blue LED and i did a backup before this
extazz_122 said:
I had installed CM-12 with Android 5.0.
I installed it with Recovery mod.
Yes i have bootloader unlocked+root and yes when I connect to PC i have a blue LED and i did a backup before this
Click to expand...
Click to collapse
Download flashtool http://flashtool.net and read up on how to use it
Download a FTF for your version from http://forum.xda-developers.com/xpe...tf-depository-sony-firmware-releases-t2829387
Charge the phone for several hours on a wall charger
Run flashtool
select flashmode
select FTF
press flash button
wait for instructions
connect ZU to PC while holding the vol. down key
wait for the flash to finish.
That should get you back to stock
Link dosn't work
Related
Help I accidentally flashed a wrong kernel to my xperia SOLA MT27i. It won't turn on now and PC can't detect it either.
Please advise.
melvinpetix said:
Help I accidentally flashed a wrong kernel to my xperia SOLA MT27i. It won't turn on now and PC can't detect it either.
Please advise.
Click to expand...
Click to collapse
I suppose the phone is off now?
If so try: download stock ROM and put it in flashtool/firmware, start flashtool, choose the stock rom with wipe data, vol - and put USB in so you can enter flashtool mode and flash official ROM.
mirost1 said:
I suppose the phone is off now?
If so try: download stock ROM and put it in flashtool/firmware, start flashtool, choose the stock rom with wipe data, vol - and put USB in so you can enter flashtool mode and flash official ROM.
Click to expand...
Click to collapse
I've tried connecting sola to PC but it seems like flashtool can't detect it. Is there other way to connect it to PC so flashtool can detect the device? I already downloaded stock firmware
Still no luck
1) Hold power + vol up until you feel the phone vibrates 3 times.
Quickly hold power down, and shove the USB wire in.
It should detect your phone in flashboot now.
2) Alternatively, after the phone vibrates 3 times, keep a hold on vol up to get it into fastboot. Then flash the correct kernel for the rom you have.
Note that ICS, GB and CM roms all use a different kernel. Make sure you have the right one.
3) Lastly, if your phone's bootloader is still locked, you can just repair using SUS.
Hi I'm BrianXYap New to XDA. So I recently just rooted my Sk17i but didn't unlock boot loader. I was trying to install cm10 on my Sk17i.It obviously failed so I gave up. (Using CWM) when I clicked reboot system, I was stuck at the Sony Ericsson logo . I tried to Go to the recovery mode or any other modes but they don't work. Can You DEV's Help me? also when I plug it in to my computer it doesn't charge for some reason. there is also no LED notification light, is it because of the failed Flash caused all these things to happen? Help!
Flash stock ftf Rom via flashtool.
And cm10 needs unlocked boot loader to flash it's custom kernel.
an0nym0us_ said:
Flash stock ftf Rom via flashtool.
And cm10 needs unlocked boot loader to flash it's custom kernel.
Click to expand...
Click to collapse
heres links - http://forum.xda-developers.com/showthread.php?t=1568792
Flashtool method
Download the correct firmware file for your phone at the bottom of the post.
Make sure Flashtool is installed.
Place downloaded firmware file(.ftf format) in Flashtool\firmwares(by default C:\Program Files\Flashtool) folder.
Start Flashtool.
Click the lightning button and choose Flashmode.
Firmware should appear there, if you have it in correct folder. Choose it.
Turn off your phone, connect USB cable to computer, then press Volume Down button and connect USB cable to your phone.
Flashtool should detect your phone and starts flashing. Follow the instructions.
When it says „Flashing completed“, unplug your phone and turn it on.
Click to expand...
Click to collapse
THe Problem is I can't do volume down combination. It still stucks at the logo
Uninstall everything on the PC related to your Phone then start from scratch.
Sent from Myushi
BrianXYap said:
THe Problem is I can't do volume down combination. It still stucks at the logo
Click to expand...
Click to collapse
What volume combination and stuck at the logo mean? You do flashing firmware via flashtool with device off.
It said connect USB cable and then power + vol - .I did it but nothing happened. It's still at the logo. I installed an official firmware once and a blue led indicator showed up. Now it doesn't .
Be sure that the phone is off then plug the usb cabl and hold volum down key in the same time and your in flash mod then open flashtool and see videos on youtube on how to flash ftf files using flashtool and that should be over
Sent from my SK17i using xda app-developers app
BrianXYap said:
It said connect USB cable and then power + vol - .I did it but nothing happened. It's still at the logo. I installed an official firmware once and a blue led indicator showed up. Now it doesn't .
Click to expand...
Click to collapse
do you really want a cm10 rom? then unlock your bootloader (but be mindful that you may lose your warrant and bad things might happen to your phone) here's the tut http://forum.xda-developers.com/showthread.php?t=1879750
after you unlock your bootloader
flash your kernel through flashtool
then install cm10 rom
but if you want to go back to your stock rom
you need flashtool and obviously your stock rom (ftf file)
click the lightning-like button then choose flashmode
select the rom then you'll be prompted to connect your phone
hold the power button and volume down button at the same time until the led light is blue.
wait to complete and your back to your original rom
i hope it helped you
something went wrong when i was trying instal the latest version of TWRP , i had TWRP 2.8.4 already installed, so, i tried install the newest version through of TWRP, now i can't boot my phone, when i try to start , a little vibration happens, i tried do a repair with but pc companion are unable do help me (because bootloader alterations, i guess) can anyone give me a little help ?
I still get a blue light when i connect my cellphone on the computer pressing the volume button
And a red light when i try charge the phone
Edit: BTW, i have the Brazilian version (D6543)
It may be soft brick. Don't worry. Download via XperiFirm the latest rom for your D6543 and flash via Flashtool (to get into Flash Mode click and push vol- and then connect to USB and hold vol- until Flashtool will start flashing)
Bruce666 said:
It may be soft brick. Don't worry. Download via XperiFirm the latest rom for your D6543 and flash via Flashtool (to get into Flash Mode click and push vol- and then connect to USB and hold vol- until Flashtool will start flashing)
Click to expand...
Click to collapse
Exactly, that's what you have to do.
It seems like you've flashed twrp from the other phone.
Sent from Xperia Z2
Luckily not from an iPhone = Yesterdays technology at tomorrows prices
Worked!!!... Kinda, now he boots, iven install the apps, but wen its time to select the language, the phone restarts by himself, wen i try enter in fastboot mode again, i now can see the recharge battery icon.
i guess i'm at halfway to solution my problem, this saturday i will have more time to work on him, thx for the tips, fellows
now its all fine, again, thx for the help
Hey there,
So I wanted to boot my phone to recovery (which i had installed some time ago) to make a backup, but the phone would just boot normally.
So i decided to install dual recovery from my pc. When it should ask me for root permission it didn't. I thought it's ok and rebooted anyway.
There is sony logo on the screen, then the screen goes black, the phone turns off and shows sony logo again.
I've dealt with bootloops a lot in the past, but How can i escape this loop if I don't have any working recovery?
Please, help me I'm really desperate :crying:
bro u just have to use flashtool and flash the ftf firmware easy download the z2 driver install it download flashtool install it too on ur pc and download the .ftf firmware of the phone and install it.. everything is on youtube ..
abdellahboughrom said:
bro u just have to use flashtool and flash the ftf firmware easy download the z2 driver install it download flashtool install it too on ur pc and download the .ftf firmware of the phone and install it.. everything is on youtube ..
Click to expand...
Click to collapse
I thought about it too but I can't go into flash mode and make my pc detect my phone....
ah do u know how to get into flash mod!! press volume down botton and plug it with pc .. hope it works if no check if the z2 driver is really installed and flashtool drivers too .. hope u fix ur phone
Yeah I know... Everything installed it just won't do anything besides showing sony logo and restarting no matter what I do...
I think it tries to boot into recovery which isn't there
My phone was bootlooping the other day and holding the power button wouldn't turn it off. I found though that Holding Power + Vol Up for some reason gave it a few vibrates and powered it off.
When phone was off I could then hold down Vol Down and plug in for flash mode and reflashed the TFT. Good luck.
tsphan said:
My phone was bootlooping the other day and holding the power button wouldn't turn it off. I found though that Holding Power + Vol Up for some reason gave it a few vibrates and powered it off.
When phone was off I could then hold down Vol Down and plug in for flash mode and reflashed the TFT. Good luck.
Click to expand...
Click to collapse
Archerixx said:
Yeah I know... Everything installed it just won't do anything besides showing sony logo and restarting no matter what I do...
I think it tries to boot into recovery which isn't there
Click to expand...
Click to collapse
yes of course you have to turn the phone off before trying to start it in flash mode. the power plus Vol Up will power off the Phone after the vibrations. after that you need to keep pressing vol Down and connect it to PC flashtool
Hi,
my sony xperia c5 ultra (E5533) has been broken after OTA update , it's not working at all please help me it's my new phone
You will have to enter into download mode or bootload mode and flash an original ROM. To avoid losing your files, flash the same rom that was . No per factoryreset only flash the rom .
maxnuk said:
You will have to enter into download mode or bootload mode and flash an original ROM. To avoid losing your files, flash the same rom that was . No per factoryreset only flash the rom .
Click to expand...
Click to collapse
i tryed but does not work for me it's hard breaked
i will help you. Do you use what program in pc?
maxnuk said:
i will help you. Do you use what program in pc?
Click to expand...
Click to collapse
i am using flash tool also xperia companion
my c5 ultra dual is totally broken it's dead, i have nothing working expect download mode
Install: Sony Mobile Phone // Download your ROM (romxperiac5.ftf) // Download and install FlashTool: http://developer.sonymobile.com/services/flash-tool/
Move your romxperiac5.ftf to "C:/Flashtool/firmwares/".
Go to: "C:/Flashtool/drivers/ " and open flashtool-drivers.exe. Select options: Flashmode Drivers/Fastboot Drivers/ and (Xperia C5 driver, something like for your phone).
Open FlashTool,
Click in Flash device(ray) and Flashmode and OK.
Select your Firmware and Flash.
Turn off the SONY XPERIA
Press and Hold together: Power Button + Volume Down Button for several seconds and Connect the usb OR Press Volume Down and Conect USB, Green light in your phone, release buttons.
http://forum.xda-developers.com/xperia-z/general/guide-how-to-package-flash-stock-roms-t2914567
maxnuk said:
Install: Sony Mobile Phone // Download your ROM (romxperiac5.ftf) // Download and install FlashTool: http://developer.sonymobile.com/services/flash-tool/
Move your romxperiac5.ftf to "C:/Flashtool/firmwares/".
Go to: "C:/Flashtool/drivers/ " and open flashtool-drivers.exe. Select options: Flashmode Drivers/Fastboot Drivers/ and (Xperia C5 driver, something like for your phone).
Open FlashTool,
Turn off the SONY XPERIA (remove the battery and put again).
Press and Hold together: Power Button + Volume Down Button for several seconds and Connect the usb OR Press Volume Down and Conect USB, Green light in your phone Hold buttons.
In Flashtool: Click in Flash device(ray) and Flashmode and OK.
Select your Firmware and Flash.
---------- Post added at 11:45 AM ---------- Previous post was at 11:43 AM ----------
It is normal the screen is black.
Click to expand...
Click to collapse
it says flash delevery missing
this way does not work for sony xperia C5 ultra olso it's internal battery i can't remove it
when you do this procedure with the USB, it lights light?
yes red light and green light
It is to send a print (Flashtool) ?
http://forum.xda-developers.com/xperia-z/general/guide-how-to-package-flash-stock-roms-t2914567
there is only red light then it turns to green light when i press v- while usb cable connected
Press V- and conect usb
i said i did and it gives me green light
kato2050 said:
i said i am did and it gives me green light
Click to expand...
Click to collapse
It send a photo of the error (Flashtool)?
please help me mention experts
maxnuk said:
It send a photo of the error (Flashtool)?
Click to expand...
Click to collapse
help me please mention Experts