Hi All,
Have been having a strange issue, not sure if this is a software related or hardware related issue. Unable to charge my phone unless i restart with charger connected added logcat for details, below is a sample snippet.
08-22 14:31:47.125 9232 9232 D UsbManager: setPortRoles Package:com.android.settings
08-22 14:31:47.126 1693 1712 I UsbPortManager: Setting USB port mode and role: portId=otg_default, currentMode=dfp, currentPowerRole=source, currentDataRole=host, newMode=dfp, newPowerRole=source, newDataRole=device
08-22 14:31:47.126 777 777 I [email protected]: filename write: /sys/class/dual_role_usb/otg_default/data_role role:2
08-22 14:31:47.127 777 777 I [email protected]: written: host
08-22 14:31:47.127 1693 1808 E UsbPortManager: otg_default role switch failed
Tried writing data to "/sys/class/dual_role_usb/otg_default" in adb root mode but was unable to do it. I guess this is related to Qualcomm drivers.
Please help me if any one has any idea.
If you are on a custom rom, it could be a kernel issue
TGDgr8est said:
If you are on a custom rom, it could be a kernel issue
Click to expand...
Click to collapse
Thanks @TGDgr8est i am on custom rom, i tried to fix the settings but unable to do so. Tried a couple of alternate Kernels, still no use.
saratsarat7 said:
Thanks @TGDgr8est i am on custom rom, i tried to fix the settings but unable to do so. Tried a couple of alternate Kernels, still no use.
Click to expand...
Click to collapse
No gravity kernel workers fine for me when I had this issue on derpfest
TGDgr8est said:
No gravity kernel workers fine for me when I had this issue on derpfest
Click to expand...
Click to collapse
Tried it again, unfortunately it dint work. Also i also started getting that error in DerpFest. Can you tell me what steps you followed when you had that issue.
If it isn't a usb issue then. I flashed ngk installed app and set things up. I use these settings . When flashing wipe davilic cache before rebooting
This aa well
TGDgr8est said:
If it isn't a usb issue then. I flashed ngk installed app and set things up. I use these settings . When flashing wipe davilic cache before rebooting
Click to expand...
Click to collapse
Yep, tried it still doesn't work. Infact the usb flex cable was changed from service center. So the usb issue can be ruled out.
Hi All,
Can anyone help me, seems to be a code in kernel not allowing me to reset phone to non charge mode when USB connected.
Thanks
Related
Hey guys,
I compiled a kernel from the official sources and combined it with the ramdisk pulled from the stock kernel from my phone.
After clearing the dalvik cache and cache partition, I rebooted in download mode and flashed the kernel using ODIN.
The problem is that my device now gets stuck at the boot screen, and using adb to try and check the logcat isn't working (keeps waiting for the device to connect). USB debugging is on and it works again once I flash the stock kernel.
So my question is, how can I know what's wrong without logcats?
I'm certain everything I've done is correct to compile it (it's worth noting, however, that the sources' read me are the same for the Galaxy Y, which I thought is normal since my device is a galaxy Y in an ace's body).
Also, the flashlight flashes briefly before the boot screen appears, which I thought is weird.
Thanks a lot.
EDIT: Issue solved. I was using the wrong config file (the instructions bundled with the kernel were wrong).
You should try to get a ksmg not a logcat
Sent from my EVO using Tapatalk 2
thicklizard said:
You should try to get a ksmg not a logcat
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I don't think getting a dmesg would be possible since adb isn't initializing properly, considering the device is never detected (and none of the adb commands work).
GermainZ said:
I don't think getting a dmesg would be possible since adb isn't initializing properly, considering the device is never detected (and none of the adb commands work).
Click to expand...
Click to collapse
kmsg and dmesg are different beasts. Chances are your kernel panics before reaching the point where adb is initalized. You could try to get early printks using the serial console. Which device are you trying to debug? You will probably need a USB to serial converter to extract the early printks for debugging.
:V :V
Never ever reply to posts with stupid text sizes is rule one .Its unreadable on a phone .
jje
JJEgan said:
Never ever reply to posts with stupid text sizes is rule one .Its unreadable on a phone .
jje
Click to expand...
Click to collapse
LOL
Iam Sorry i Will Edit It
I Just Wanted people to Focus On The problem If They Are In Hurry
When Ever I Boot I Got a Red (!) Sign At Top Left Corner of The Screen I Don`t Know What It Is But Its For Sure A Problem
>>>Of course you have
. Try searching the problem and fix .
When I Plug my USB to the PC it makes a Sound That Something is Connected But It Won`t Show a Device Neither the Phone Show Any Choices (PPTP mode or Memory )
>>>No USB driver wrong cable wrong PC USB port damaged phone usb standard.
Suggest one format system cache data and sd card flash stock rom via Odin .
Suggest two read the basics faqs and guides .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
JJEgan said:
When Ever I Boot I Got a Red (!) Sign At Top Left Corner of The Screen I Don`t Know What It Is But Its For Sure A Problem
>>>Of course you have
. Try searching the problem and fix .
When I Plug my USB to the PC it makes a Sound That Something is Connected But It Won`t Show a Device Neither the Phone Show Any Choices (PPTP mode or Memory )
>>>No USB driver wrong cable wrong PC USB port damaged phone usb standard.
Suggest one format system cache data and sd card flash stock rom via Odin .
Suggest two read the basics faqs and guides .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Click to expand...
Click to collapse
""""">>>No USB driver wrong cable wrong PC USB port damaged phone usb standard."
I GOt The Original Samsung USB and i got Odin Installed and Samsung GS3 INT Toolkit and The Driver is Installed (Reinstalled It Nothing Happens )
"""Flash Stock rom Via Odin"""
Well the Way I Fixed the Phone Was Originally Flashing Stock Rom then flashing Custom Rom....
After I Flashed The Stock Rom i Tried connecting Usb it didn`t connect either and Went into reboot loop (When Idle)
"""""""I Have Everything Working""""""""
Just USB AND BLUETOOTH not Working
Guys i Went Into Recovery and went into Advanced >Show Log
Thats What Came Out
unknown volume for path [/sd-ext]
Can`t partition non-vfat: datamedia
Can`t format unknown volume : /emmc
Click to expand...
Click to collapse
Any Help ?
Just to Say The Phone Runs Extremely Fast (Only the 3 Problems i siad Up There)
For Problem Number (1)
I Found out This Topic
http://forum.xda-developers.com/showthread.php?t=2011728
So What I Figured Out That (ALL SAMSUNG GALAXY S3 Came With Android ICS (4.0.4) )
What I Did was Flashing JB Stock Rom ( Maybe SAMSUNG but a New Security mod in it )
anyway it don`t bother Me I Just Want to Know What Is Wrong With My emmc and datamedia and usb, bluetooth
Guys Please help Me With The EMMC fix and USB , Bluetooth not working
:\
1. Why Are You Writing Like This?
2. Why, oh why, did you tick "nand erase all"? Don't use odin if you don't know what it does.
Theshawty said:
1. Why Are You Writing Like This?
2. Why, oh why, did you tick "nand erase all"? Don't use odin if you don't know what it does.
Click to expand...
Click to collapse
1-Like What ???
2-i Used to set custom Roms to HTC HD2 and i always used NAND so i guessed its the same thing :\ i know its a stupid step but now i need help not blame
x3alooshx said:
1-Like What ???
Click to expand...
Click to collapse
every word's first letter is capitalized
It Feels Better
Now For Problem Number 2 the USB I FOund This
Originally Posted by nacos
1. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
Click to expand...
Click to collapse
are you seriously doing it on purpose?
I suggest you install a stock ROM once you have a working USB driver.
Follow the instructions in this post using the root kit to install the correct drivers;
http://forum.xda-developers.com/showthread.php?t=1703488
Rackers said:
I suggest you install a stock ROM once you have a working USB driver.
Follow the instructions in this post using the root kit to install the correct drivers;
http://forum.xda-developers.com/showthread.php?t=1703488
Click to expand...
Click to collapse
+1 back to stock, will rule out a hardware fault. Which could have occurred coincidentally to your fiddling.
IMHO its best to read and understand before fiddling with stuff like odin, it's very easy to end up with a very expensive paperweight by guessing which boxes to tick.
Sent from my GT-I9300 using Tapatalk 2
x3alooshx said:
It Feels Better
Now For Problem Number 2 the USB I FOund This
Click to expand...
Click to collapse
You seem determined to annoy people, and I'm afraid that isn't going to help your cause
I Just love to see words with first big letter is that wrong does that harm anyone ???
well for the problem...I Guess Flashing a stock is the only option to get Bluetooth back
didn`t try my usb solution yet
gonna post soon
x3alooshx said:
I Just love to see words with first big letter is that wrong does that harm anyone ???
Click to expand...
Click to collapse
It's annoying
x3alooshx said:
I Just love to see words with first big letter is that wrong
Click to expand...
Click to collapse
Grammatically, yes. Grammar Nazis gonna get you.
Sent from my GT-I9300 using Tapatalk 2
you all ignoring helping me just to tell me that i write worng ...yeah thank you...
anyway i tried the sloution for the usb and it didn`t work.......windows detect it as (CDC communication interface)
not only 1 device no almost 5 or 8
Friends ,please help me. my device is in big trouble.It was MIke's LX Kitkat ROM in phone.some days ago i installed LinkToSD and moved some apps to my memory card without partitioning it.After that i couldn't access my memory card on pc via mass storage or media transfer mode.Device is getting charged when connected to the PC(only if usb debugging is enabled) but PC even doesn't show any sign of a connected hardware .I tried using different cables tried in different PC but no use.Can't use flash tool since hardware is not detected by the computer.Thinking it was a ROM problem i switched to the Carbon ROM, but couldn't flash the kernel because of the connection problem.And now wifi is also stopped working.Some one please help me..(I don't remember if i turned on fastcharge option or not) but i can't see the option now just for checking wthr i enabled it or not).Help me
Can you get into recovery? Fastboot?
kirev said:
Can you get into recovery? Fastboot?
Click to expand...
Click to collapse
yeaah.. i can get into recovery mod but not in fast boot..
What recovery options do you have now? Probably someone has Lx KitKat ROM to be flashed from SD card or adb in recovery? Or someone can make you one Give us details about the exact phone, recovery and LX you are using.
kirev said:
What recovery options do you have now? Probably someone has Lx KitKat ROM to be flashed from SD card or adb in recovery? Or someone can make you one Give us details about the exact phone, recovery and LX you are using.
Click to expand...
Click to collapse
i have custom rcvry mode and can flash a rom as zip.But i flashed mike's latest LX Rom .. but wifi didn't work. i think i have to flash the kernel too from the zip.. but there is no way.. and kernel vrsion is 3.4.72 nAa+ [email protected]@1 (wed dec 11 06:07:05 EST 2013
http://servforu.blogspot.com/2013/04/unbrick-xperia-ray-using-s1-tool.html
kirev said:
http://servforu.blogspot.com/2013/04/unbrick-xperia-ray-using-s1-tool.html
Click to expand...
Click to collapse
Thanks for the link dude. but my device is not bricked.I flashed the latest LX of Mike but i can't turn on the wifi because i can't flash the kernel inside the zip.when i connect my phone to pc,charging only works. but system even doesn't detect a hardware is connected.somewhere i read enabling fastcharging will do the same.. but i don't remember i enabled that option.any way when i searched for the option to check,i couldn't find it
You can always go back to stock with S1 Tool. And to LX from there Even that's not bricked...
kirev said:
You can always go back to stock with S1 Tool. And to LX from there Even that's not bricked...
Click to expand...
Click to collapse
Thanks i will give a try.. but will the software identify my device? it is not getting detected by the PC or flashtool
Try it without flashing. Just to know that you have it.
kirev said:
Try it without flashing. Just to know that you have it.
Click to expand...
Click to collapse
And device mentioned in that blog is Xperia ray and mine is mini pro sk17i .is there any problem in that?
Nope. All 2011 Xperias should be fine as seen on the images included there. Go through the identification process only.
kirev said:
Nope. All 2011 Xperias should be fine as seen on the images included there. Go through the identification process only.
Click to expand...
Click to collapse
phone is not detecting..
Vivek ps said:
phone is not detecting..
Click to expand...
Click to collapse
With turning off?!
kirev said:
With turning off?!
Click to expand...
Click to collapse
yeah.. turned off and pressed volume down button while connecting. green led light is there ..but not detected by the s1 tool
Try another computer or update with recovery. Or find a repair shop, it might be a hardware problem at the end.
download and install latest flashtool driver pack by DooMLoRD from Sony cross device projects
Did you remove the battery for one minute before trying?
Also check http://www.flashtool.net/index.html instead of S1 Tool
The problem is that ,PC is not identifying the presence of a hardware connected to it.It is showing any changes in device management.No sign of a connected hardware.but charging occurs
Please help.My micromax A116 not charging while swichted on.If i Swiched off than connect charger it charges perfactly .All usb function ie otg drive otg mouse working perfactly.Even I flashed it with stock rom,calibrate battery flash other rom .But still it is not charging while it is on .So every tome it discharged I have to switc it off than charge in same switch off mode.Even i give it to the mobile service center they told there is no fault in board neither in battery.
Same problem
vicky4india said:
Please help.My micromax A116 not charging while swichted on.If i Swiched off than connect charger it charges perfactly .All usb function ie otg drive otg mouse working perfactly.Even I flashed it with stock rom,calibrate battery flash other rom .But still it is not charging while it is on .So every tome it discharged I have to switc it off than charge in same switch off mode.Even i give it to the mobile service center they told there is no fault in board neither in battery.
Click to expand...
Click to collapse
Have you fix your phone. Please share if did. I also have the same problem with my phone. I think it is happen when i calibrating my battery.
Guilaz said:
Have you fix your phone. Please share if did. I also have the same problem with my phone. I think it is happen when i calibrating my battery.
Click to expand...
Click to collapse
no i am also waiting for help.second i wish to mention its happen when i flash doge rom and suggested karnel.:crying:
A software problem
vicky4india said:
no i am also waiting for help.second i wish to mention its happen when i flash doge rom and suggested karnel.:crying:
Click to expand...
Click to collapse
If the phone charges while switched off there is no hardware problem whatsoever. It's a bug. You should post about this bug in Doge ROM thread. If you want to get rid of the bug flash stock (via sp flash tool) and then other custom rom. If you want to use a custom kernel with a custom rom keep in mind to check that the base rom used is A116 stock.
I have also read that removing the battery for an hour or two and than putting it back in solved the problem.
The other problem can be the charger. Are you using the USB cable that came with your smartphone? Even if you are charging with the original cable do get a hold on another(from your friend owning a116) and check if the problem still persists.
Thanks anyway
Jayvijay Gohil said:
If the phone charges while switched off there is no hardware problem whatsoever. It's a bug. You should post about this bug in Doge ROM thread. If you want to get rid of the bug flash stock (via sp flash tool) and then other custom rom. If you want to use a custom kernel with a custom rom keep in mind to check that the base rom used is A116 stock.
I have also read that removing the battery for an hour or two and than putting it back in solved the problem.
The other problem can be the charger. Are you using the USB cable that came with your smartphone? Even if you are charging with the original cable do get a hold on another(from your friend owning a116) and check if the problem still persists.
Click to expand...
Click to collapse
I relly appreciate your comment sir. But ive allready tried to flash stock via sp tool but the problem is no driver found in my device. Were the same thought it is not about hardware problem therefore i wont to go to service center for this. Id like to solve this issue with my own searching and also asking here :laugh::laugh:
I think the problem is the built in driver of my phone is corrupted. When it connect to pc. It always say unknown device.
Guilaz said:
I relly appreciate your comment sir. But ive allready tried to flash stock via sp tool but the problem is no driver found in my device. Were the same thought it is not about hardware problem therefore i wont to go to service center for this. Id like to solve this issue with my own searching and also asking here :laugh::laugh:
I think the problem is the built in driver of my phone is corrupted. When it connect to pc. It always say unknown device.
Click to expand...
Click to collapse
i tried all stock rom of different version ,custom rom,flashing stock by formatting and flashing method by sp tool,changing karnel all possible,but finally no result still i can flash .and charge in off mode.but in on mode only otg function working no pc connection no charging.
its true that driver problem but how i can get that particular driver.and why flashing not resolving the problem any help please .thanks
vicky4india said:
its true that driver problem but how i can get that particular driver.and why flashing not resolving the problem any help please .thanks
Click to expand...
Click to collapse
Vicky i successfuly flash stock via spflashtool but i still having a problem about charging . Now weve noticed that sp flash tool is not sulotion
Ya so flash tool is not the solution. It should be meta mode flashing. But as on some forum described meta mode flashing via connecting the phone by holding volume up .I tried but found it is not meta mode flashing .so only a factory mode flashing can help.second I checked in boot loader test it showing charger connected but the power its getting from the charger shows 49 ma.that's the reason of slow charging while switched off.but when switched on I tried diagnostic tools no charger and USB connection detected soclear some bug in a script which not let USB connection and charging .
Still cross finger waiting for expert solution.
vicky4india said:
Ya so flash tool is not the solution. It should be meta mode flashing. But as on some forum described meta mode flashing via connecting the phone by holding volume up .I tried but found it is not meta mode flashing .so only a factory mode flashing can help.second I checked in boot loader test it showing charger connected but the power its getting from the charger shows 49 ma.that's the reason of slow charging while switched off.but when switched on I tried diagnostic tools no charger and USB connection detected soclear some bug in a script which not let USB connection and charging .
Still cross finger waiting for expert solution.
Click to expand...
Click to collapse
i google your problem and found a very strange solution( strange because it is illogical but don't know how it is working for some people you may try it )
http://forums.androidcentral.com/go...-charges-when-phone-off-dosent-when-help.html
Thanks I already googled and found that option. But that one is not working.
Sent from my Micromax A116 using xda app-developers app
I tried each and every option even updated latest kash kernel. Stock kernel. Doge rom stock rom. I also seen two new thread same problem but not solving please someone help
Stock rom with 4.2 orginal...
If the problem continues. Flash with sp tool and get to mmx care....
Sent from my Micromax A116 using XDA Free mobile app
I had the same problem
i had the same problem ,
just change your cable and make sure the front part of the cable i mean the one you insert in your phone looks like original micromax cable
this helped me and now man phone is charging fine
hope it works for you
Same problem here nothing seems to work
I have the same problem here with my Micromax A117 Canvas Magnus the mobile charges well when switched off but when its on it refuses to do so. It sends current in reverse lighting up the LED on the charger.
Every thing in the phone is stock.
I'm using the provided adapter and cable.
Guess its a problem with Micromax
Not charging phone while switched on
I am also facing the same problem, Not charging phone while switched on, please help!
Same problem
hi there
i am having a auxus nuclea n2 phone. this is also a mediatek phone. Same problem. while switched on. No charging. No usb. When switched off. Slow but perfect charging. I consulted auth. service centre and flashed default stock ROM provided by them via SP flash. But no result. Antivirus results also clean. Waiting to solve this BUG.!!
just flash the stock ROM then give to service center
they will solve the problem :laugh::laugh:
Micromax A116 switched off during factory reset due to low battery
Hi,
My micromax a116i swiched off during factory reset(manually) and it is death now, charging indicator showing nothing, even I have try to power on button, but still it is not working.
Please help.
Regards
Pravin
Resolved
Mobile uncle tool engineering mode solved my issue
Thanks to below post. (Solution at end)
S2 not charging when phone is switched on | Android Forums -androidforums.com/threads/s2-not-charging-when-phone-is-switched-on.561877
Hello :laugh:
I have a big big big problem ... I have an ace S5830 C (identical to I), and I broke his touch :crying:
but the LCD is working normally, I do not intend to buy a new touch, because this phone is just for my entertainment hehe
(I have a S5 for daily use)
the problem is ...
I have read many articles about Access control with ADB shell, but the device is disabled adb, so I'm interested in a way to enable this ADB using my PC.
I would be really grateful if they can help me with this... Tks...
SenoskiEDF said:
Hello :laugh:
I have a big big big problem ... I have an ace S5830 C (identical to I), and I broke his touch :crying:
but the LCD is working normally, I do not intend to buy a new touch, because this phone is just for my entertainment hehe
(I have a S5 for daily use)
the problem is ...
I have read many articles about Access control with ADB shell, but the device is disabled adb, so I'm interested in a way to enable this ADB using my PC.
I would be really grateful if they can help me with this... Tks...
Click to expand...
Click to collapse
Bro, is the hardware keys working fine? Can you enter Recovery and Download Mode? Your only solution now will be to flash a rom with USB Debugging enabled by default. Try flashing the stock rom back using odin from Download Mode as USB Debugging is enabled in them. Do post the result. Hope I Helped
mahithm said:
Bro, is the hardware keys working fine? Can you enter Recovery and Download Mode? Your only solution now will be to flash a rom with USB Debugging enabled by default. Try flashing the stock rom back using odin from Download Mode as USB Debugging is enabled in them. Do post the result. Hope I Helped
Click to expand...
Click to collapse
Actually, I magically could enable ADB (do not ask me how) the problem now is that I'm using the screencast to try to control the device, however I can not unlock the screen .. :/
PS: Normal block (sliding your finger)
the screencast is:
http://forum.xda-developers.com/showthread.php?t=663390
SenoskiEDF said:
Actually, I magically could enable ADB (do not ask me how) the problem now is that I'm using the screencast to try to control the device, however I can not unlock the screen .. :/
PS: Normal block (sliding your finger)
the screencast is:
http://forum.xda-developers.com/showthread.php?t=663390
Click to expand...
Click to collapse
Seems like this is a known issue with Android Screencast. Here is the link,
Issue 59:unable to unlock phone from screencast screen
Try if the solution specified works. Do post the result. Hope I Helped