[UNBRICK/RAW] Revive your bricked ASUS ROG Phone 3 [23-NOV-2021] - ASUS ROG Phone 3 Guides, News, & Discussion

Unbrick your ASUS ROG Phone 3 for free!!
Don't pay for this stuff anywhere, it's your device and you deserve the right to fix it yourself.
I noticed some people in the community charging upto 50$ for the firmware which should've been free from the start.
Code:
#include <std_disclaimer.h>
/*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* I'm not gonna tell you how to install drivers and other things and only[COLOR="RoyalBlue"][/COLOR]
* proceed with this if you know what you're doing and please do some
* research first. YOU are choosing to make these modifications, and if you
* point the finger at me for messing up your device, I will laugh at you.
*/
NOTE - In case it's a Hard / Soft Brick
• For Hard Brick - Hard brick is when your device can only enter EDL mode and shows up as Qualcomm HS-USB QDLoader 9008 in device manager.
- Just follow from Step 1 to 3 to fix your device.
• For Soft Brick - Soft brick is when the system fails to boot but you can access fastboot mode.
- Just follow Step 3 to fix your device.
Prerequisites ►
• Windows PC
• Device fastboot drivers
• Qualcomm EDL drivers
• a bricked ROG 3 duh
Downloads ►
• EDL Unbrick tool - ROG_PHONE_3_ZS661KS_UNBRICK_EDL.7z
• RAW ROG 3 Firmware - Check the second post below
Instructions ►
Make sure you have device manager opened up to see if the device is connected.
1] Extract the EDL firmware
- Use the side port and connect device to PC
- Then run the file named 1ROG3_VFLASH_EDL.cmd
2] After you get an EDL SUCCESS message let the device boot within a minute or two into bootloader, use the device manager to
check if it's in EDL and if it's still there after a minute, press Power key + Volume down for about 12-13 seconds until
you don't see it in Device Manager, keep it plugged in and let it boot or try to power it on so it gets into the bootloader.
3] Once it's in bootloader flash any of the RAW firmware linked above depending on the device that you have, if its Tencent then flash CN, for global it's WW.
- Extract the RAW firmware and run the file zs661ks_raw_flashall.bat , have some patience and do not disconnect the device as this will take some time.
• That's all folks.
ROG 2/3 Telegram Groups & Channels ►
Global Discussion Group
Updates Channel
GCam Discussion

---

List of RAW firmware (latest at the top)
— Android 11 RAWs —
18.0410.2108.158 : WW
18.0410.2106.138 : WW
18.0410.2105.133 : WW
— Android 10 RAWs —
17.0823.2104.147 : WW
17.0823.2102.143 : WW
17.0823.2012.131 : WW
17.0823.2012.122 : WW
17.0823.2009.99/100 : WW | CN
17.0823.2009.98 : WW | CN
17.0823.2008.78 : WW | CN
17.0823.2007.58 : WW | CN
17.0823.2007.47/48 : WW | CN
17.0823.2007.32 : WW | CN

---

does it work for imei repair

---

tolgahan33 said:
does it work for imei repair
Click to expand...
Click to collapse
NO

---

deadlyindian said:
Unbrick your ASUS ROG Phone 3 for free!!
Don't pay for this stuff anywhere, it's your device and you deserve the right to fix it yourself.
I noticed some people in the community charging upto 50$ for the firmware which should've been free from the start.
NOTE
If your device can only enter EDL mode and shows up as Qualcomm HS-USB QDLoader 9008 in device manager then this is for you.
I'm not gonna tell you how to install drivers and other things, you should only proceed with this if you know what you're doing.
Prerequisites ►
• Windows PC
• Device fastboot drivers
• Qualcomm EDL drivers
• a bricked ROG 3 duh
Downloads ►
• EDL Firmware - ROG_PHONE_3_ZS661KS_UNBRICK_EDL.7z
• RAW ROG 3 Firmware - WW RAW | CN RAW | Mirror [17.0823.2007.32]
Instructions ►
Make sure you have device manager opened up to see if the device is connected.
• Extract the EDL firmware
- Use the side port and connect device to PC
- Then run the file named 1ROG3_VFLASH_EDL.cmd
• After you get an EDL SUCCESS message let the device boot within a minute or two into bootloader, use the device manager to
check if it's in EDL and if it's still there after a minute, press Power key + Volume down for about 12-13 seconds until
you don't see it in Device Manager, keep it plugged in and let it boot or try to power it on so it gets into the bootloader.
• Once it's in bootloader flash any of the RAW firmware linked above depending on the device that you have, if its Tencent then flash CN, for global it's WW.
- Extract the RAW firmware and run the file zs661ks_raw_flashall.bat , have some patience and do not disconnect the device as this will take some time.
• That's all folks.
Click to expand...
Click to collapse
what cable did you use?

---

takoyaki17 said:
what cable did you use?
Click to expand...
Click to collapse
You can use the deep flash cable if you can't get your device into EDL mode
Also don't quote the whole thing, just tag the user next time.

---

sorry,first time using this XDA lab app.thanks btw

---

Is it possible to unlock bootloader via EDL ?

---

Reserved Thanks

---

Do we need to keep PC in Test Mode?
Sorry I used Unbrick Toll of Oneplus earlier in that we need to put PC in test mode, that's why I'm asking.

---

sendme2pop said:
Do we need to keep PC in Test Mode?
Sorry I used Unbrick Toll of Oneplus earlier in that we need to put PC in test mode, that's why I'm asking.
Click to expand...
Click to collapse
When drivers lack a valid driver signature Windows prevents them from being installed and that's where test mode and disabling Driver Signature Enforcement comes in, if you have driver's with valid signature then you don't need to do this

---

Moha1155 said:
Is it possible to unlock bootloader via EDL ?
Click to expand...
Click to collapse
If you find a solution to this problem, please write. I also cannot unlock the bootloader on my Tencent version

---

Thanks for making this thread. This is my 1st Asus device and I confirmed that this tool is working 100%. I got my bricked device back with this tool. Now waiting for other development for Dirty Flash.

---

Warning Guys please dont use this tool
Unless the issue been rectified
This unbrick tool damage system partition
And persist as well
Need to fixed as early as possible
It also boot in asus rog 2 boot animation

---

Asus ROG Phone 3 (I003D)
можете помочь пытался прошить с китайской на глобальную Asus ROG Phone 3 ни чего не получается может есть человек мне нужна помощь

---

Please update the RAW files man thanks

---

Qtr1st said:
Warning Guys please dont use this tool
Unless the issue been rectified
This unbrick tool damage system partition
And persist as well
Need to fixed as early as possible
It also boot in asus rog 2 boot animation
Click to expand...
Click to collapse
Can you please explore more how its damaging the partition?
Have you tried it or its your guess?

---

I wouldnt say if i didnt try .. i flashed when i forced my phone to edl
And then tried edl mode .. the phone could not boot anymore .. system partition was damaged and couldnt be flashed using fastboot even when i re unlocked my phone by a help of chinese guy .. and then got system partition solved and also persist was fixed

---

deadlyindian said:
Latest at the top
17.0823.2007.58 : WW | CN
17.0823.2007.47/48 : WW | CN
17.0823.2007.32 : WW | CN
Click to expand...
Click to collapse
update

---

sendme2pop said:
update
Click to expand...
Click to collapse
How about you do it yourself? Ever hear of google? Geez.