I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
leo13aug79 said:
I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
Click to expand...
Click to collapse
Might help to reinstall KIES or try another computer.
Keeps saying "USB Device not recognized"
USB drivers problem remove Kies totally and reinstall .
Connect in mass storage mode and let windows find drivers .
That fails its broken phone .
jje
you broke your phone.
buy another SGS II
You can always try using a USB JIG to put the phone in download mode.
leo13aug79 said:
Keeps saying "USB Device not recognized"
Click to expand...
Click to collapse
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
Click to expand...
Click to collapse
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
OMG! It's WORKING!
Thanks a lot to you all guys for the co-operation....
So, what did I do???? I uninstalled Kies and re-installed a couple of times but it won't access it. Tried Odin in all possible ways, No success. While playing and after ordering a "Jig" from some1 in USA,
I thought of something else and while the phone still being connected with the pc, I ran SuperOneClick, but it went on saying waiting for the device,.... I accidentally or in frustration hit the "HOME" button and it started doing something, USB drivers and Modem drivers installed on PC. Then I started Odin and the port went "Yellow". And I flashed it with the XXKG3.....
OMG! I'm so much relieved!!!!!!!! thanks God
thank you all too
Love your SGS2 and love God! Bless you all!
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
I love you man! You saved my phone and me!
So what have we learnt today? Don't go screaming "brick!" everytime you encounter a problem
I had a same issue yellow triangle between Phone and PC symbol...
followed this step .. http://forum.xda-developers.com/showthread.php?t=1274337
just did like this on very first step to get into odin mode hold vol down and power for longer then usual to get into odin mode and by pass that yellow triangle between Phone and PC screen and then follow rest of it same and easy as right clicking on desktop LOL!
From my experience, only true brick I encountered was when I messed with boot loaders. If the screen shows anything at all, Odin will recognize it. Glad to hear it's fixed
Sent from my GT-I9100 using XDA App
Odia said:
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
Click to expand...
Click to collapse
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Can you get into download mode? If yes then reflash stock firmware using Odin
Sent from my GT-I9100 using Tapatalk
A bricked phone is a phone which will not respond. It maybe a soft brick or hard.
If you can get into download or recovery all you have to do is reflash. Wipe data & Cache. You will be up and running. If your phone is not recognised by your computer then reinstall kies.
Sent from my GT-I9100
Yep. Infuse Q&A (You're in the wrong section).
anjimgo said:
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Click to expand...
Click to collapse
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Brittlespeed said:
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Click to expand...
Click to collapse
I can't tell if you're asking for help or just letting people know, but anyway, considering all your previous posts were in the Epic 4G Touch forums, you've probably trashed your device flashing something meant for the I9100.
See this thread for confirmation of your new shiny brick, if my above assumption was correct: http://forum.xda-developers.com/showthread.php?t=1492323
this solution worked for a Galaxy s3 mini
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
Thanks a lot. My teenage son thought he had bricked his S3 mini but I was able to fix it after reading this thread. Thanks.
I own Samsung galaxy S. by mistake I used the wrong ROM files (odin) and now its running "AT&T SGH-i897 (Captivate) ROM". the home screen is not working and the phone restarting every ~ 2 minutes.
I've tried to update using ODIN but the computer doesn't recognize the phone (not a drivers issue).
On the recovery mode it failed to use the update.zip files.
I tried to format everything, full wipe and factory defaults - didn't help.
Any ideas ?
Thanks,
-Yaniv
if odin doesn't recognize your phone its probably a driver issue, use samsung lies to install drivers ( even if soft bricked), then get into download mode and odin should recognize your phone
had nightmares with stupid odin.
i know what the problem is. it is the computer. get another computer and try. preferably on XP. i went through 3 computers till the damned odin would listen to me.
I bought a refurbished galaxy s2 and in the start everything went fine until i flashed CM 10.1
After that rom the pc was unable to detect phone via usb.
So then i did a factory reset from the rom and not from CWM and after that the phone is stuck at the boot logo i.e. samsung galaxy s2 i9100 and a yellow triangle and would not go further. And when it is powered off and i connect it to charger a battery appears with circular loading sign and it wont go past after that.
The phone does not go in recovery mode. just gets stuck at the logo with triangle(yellow).
I turned phone on in download mode and connected to pc but it was not detected by odin or even pc.
I have all the drivers correctly installed.
Things I have tried:
1. Changed the USB cables, tried 5 different computers but still no luck.
2. Removed the drivers completely and reinstalled but still no luck.
3. Cleaned the USB port of phone but no luck.
4. Tried connecting to different ports of pc but still no luck.
Now I cannot go to service center because it has no warranty and it was refurbished so.
Any ideas would be hugely appreciated.
I am willing to repair it myself if anyone could guide me about the hardware problem.
I also have a Nexus S which is connecting to every single PC easily and in every port of PC but S2 just wont.
did you try accessing CWM Recovery mode?
Nope the phone does not boot in recovery mode
Piti ful bump
Check this out, it's fresh as a strawberry:
http://forum.xda-developers.com/showthread.php?t=2345831
Sent from the little guy
The guide is for odin fail flashing but my device is not even recognizing I am unable to flash via odin if it does not recognize my phone .
I have given the phone to samsung service center and they said they would call in a week. I do not have warranty so i hope the cost of repair is within my range
It's about troubleshooting, kinda what you're going thru.
Sent from the little guy
Section has been added to guide's OP (linked above by gaston) of steps to try if Odin won't even recognise the phone.
Sent from my GT-P7510 using Tapatalk 4 Beta
Phone is SCH-I545
My trouble started when I upgraded to 4.4.2 while rooted..
Afterwards I had phone randomly restarting problems. (And when I upgraded OTA, the bar was stuck for hours and I had to pull the battery to restart phone and get past the Android guy.)
So learned about Odin and thought Id fix by flashing a stock rom.
Odin wouldnt work and when I pulled the plug and went to restart, phone gives me firmware upgrade encountered error message.
Tried resetting.
Tried booting into Safestrap.
Tried every recovery with Odin.
Tried both versions of Kies which odly, Kies wont recognize my IMEI so technically unable to try Kies.
Where do I go from here?
Odin will help u out . First of all check the drivers uninstall them and reinstall the drivers then restart the pc and try it again if it occurs again try to change the usb port and check out the cable ... Btw which odin firmware you are trying to FLash and what was your firmware before flashing ??
Hi everyone,
I have an SII GT- I9100 that I installed a custom ROM on a while back (probably 2 years ago). After a while it got badly bricked I don't remember what happened, and not only that
the charging port was also messed up so I couldn't connect it to my pc (pc wouldn't recognize it unless I held the cable in with force, but even that didn't work after some time).
It's been sitting on a shelf for about a year and I decided to buy a new charging port, replace it, unbrick it and give it to my mom.
I did replace it and I can connect it to my pc now but there's still issues. On my main windows 10 pc it gives me an error "USB device not recognized, the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". (I've reinstalled usb drivers and troubleshooted with Kies).
I keep the phone in download mode while I am trying to connect it to my pc since I can't boot into anything (I have a yellow triangle and Samsung logo if I don't go into download mode).
On my laptop (win 7) I've managed to get windows to install all the drivers(even though it failed a couple times ?), I've also troubleshooted with Kies, still Kies can't connect to it.
I want to restore it to stock ROM but I haven't been successful.
I've tried many different Odin versions, nothing.
I've been trying a stock ROM for the country and network I think it was on(I don't know it for sure, could this be an issue ?), and a set of CSC, MODEM and CODE XXLSJ files.
In all the Odin versions I've tried it gets stuck on NAND write start !! what's going on here?
Is it beyond repair?
btw. I can't get into recovery mode just DL mode.
Thanks in advance!