Related
Disclaimer
Code:
Neither Me Nor XDA Are Responsible If You Lose Your Job/Break Your Device.
Your Warranty Is Now Void
Downloads :
WIP
Instructions :
Extract The .rar
Open The Setup File And Install LG Flashtool
Right Click On The Shortcut Created On Your Desktop And Open File Location.
Copy The .dll Files From The DLL Folder To The Previously Opened Location And Replace The .dll In Flash Tool Folder If Any.
Open The Flashtool,Select The .dll Then The .tot/.bin File And You Are Ready To Flash The Firmware,Connect The Phone In Download Mode When Asked.
Note :
I Don't Know Whether It Works For N4 Converted Devices.I Had Successfully Flashed Stock .20 .bin File With It.But I Suggest To Use This Only When LGNPST Does Not Work/Fails To Flash The FW As For Me.Please Don't Perform Unwanted Experiments With Your Device Or It Will Result In A Hard Brick.
This Guide Was Originally Created By madmack @ Optimus G Pro Section So Thanks To Him.
I was Searching For The .dll File For Our Device And Found It So Decided To Create A Thread.And Those Who Are Thinking That The Required .dll Is The Same That We Use For LGNPST,NO,This Is A Different .dll
It Did Not Ask For Unlock Code When I Flashed The Stock JB FW.But As Posted By madmack there is A Possibility That It Can Ask For Your Unlock Code.So Proceed With Caution.
Again This Is A Alternate To LGNPST And Only I Have Successfully Flashed The Stock FW.It Is Recommended That Unless It Is Tested By 4-5 Experienced Users,Its A No Go For Noobs/New Users.
And Be Advised That This Process Will Wipe Your Internal Storage.
Enjoy!
Regards,
acervenky,
XPT
reserved
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Googler_1976 said:
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
Click to expand...
Click to collapse
Changed The Status To WIP.
Will Search For The Info And Update The Thread Soon
Regards,
acervenky,
XPT
autoprime said:
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Click to expand...
Click to collapse
Yup.
Regards,
acervenky,
XPT
Download link is missing.
I've try to found the download link for the Lg Flash tool on this page, but i haven't. Can you fix it or explain? Thanks anyway.
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
cougar214 said:
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
Click to expand...
Click to collapse
Here is the file you need to get her phone back to STOCK U.S: http://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip I'm not sure on the DLL file, I use LGNPST so not sure if they are the same but attached it also just incase you can use it.. stock firmware file above is a .tot file so if you need to you can just change it to .bin if you need to.
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
cougar214 said:
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
Click to expand...
Click to collapse
Where do you go check to see if its U.S or Korean?
All settings--> about phone -->phone Identity.
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
cougar214 said:
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
Click to expand...
Click to collapse
After a little checking I found out the same thing, It was normal as it was the place of manufacturer. I'm not sure what the problem might be but as far as I know that's the stock firmware for the phone.. You might try this one out http://www.androidfilehost.com/?fid=22901594685177912 you just boot into recovery do the normal wipes and flash through recovery, its supposed to be stock except for being rooted and as far as I know those are the only two stock files floating around for the phone...
Thanks Blake. Can you confirm for me that this phone will NOT get OTA updates if it's changed in any way, including rooting? It's what I was told by someone else. If that's the case then I guess there really is nothing wrong with the phone except those weird unexplained small changes.
I've got all the correct files download and I made it so far as to try to actually flash the phone, but it fails and gives me a wrong model number message because it's detecting my phone as a E960 (it's an E970). Any ideas? I had installed the latest CM11 ROM over some encrypted data and now I'm locked out (old encryption PIN doesn't work) and I can't restore it to stock.
can someone help me with a .tot or .bin stock for lg l70 d320n? cuz i"ve looked for it everywhere but couldn"t find anything
need help bad.
i got this phone from a friend and it originally had cm11 on it. the phone in question is the lg e970. i wanted to get back to stock. so i downloaded the correct firmware and added it to my external sd card. using twrp before i proceeded to wipe the phone via twrp. when it was finished i restarted the phone into twrp and went to install the stock firmware and i could not find my exsd card. twrp does not recognize it at all. so now im stuck with a phone with no os on it. i can ge into twrp and download mode, and when i just boot the phone it goes to lg logo and stays there. i need help in trying to figure out how to get stock firmware back on phone. i am used to samsung phones and odin. so im a noob when it comes to lg. i am very tech savy when it comes to computers. plzzzzzz any help would be great!!!!!!!! and appreciated
I can not add .tot file in LG flash tool
I have unrooted my lg g3 before on another computer. But i can't add the .tot file with my new computer. I am doing everything the same.
Does anyone have any ideas?
(FlashKDZ/Root/Recovery/Hiddenmenu/troubleshooting) (noob2noob guide)
Okay, this is my first thread on XDA, the reason I'm making it is there is a lots of problems with progressing to lollipop. All of this is already mentioned in the forum, but this way it is much easier since it is all at one place. If I'm doing something wrong please warn me with explanation how to resolve the issue. If I'm posting in wrong forum section please move my thread where it is supposed to be.
1. Before doing anything check if your phone is ready to get updated:
1.1 Do you have a stock Kitkat rom or at least a rom that is kitkat based, since there can be a problem with partitioning if custom lollipop rom is installed
1.2 Create a backup. Don't be lazy LG backups will not help you since they can't go from kitkat to lollipop, don't try to do it from recovery because you will lose custom recovery. Copy your files from phone including extracted contacts, and back it up online with google or some other backup providers.
1.3 Check if you have a latest touch firmware, because you might have a problems after installing lollipop and it will be hard for you to check for updates since your touch might become useless.
1.3.1 To check it go to hidden service menu by typing 3845#*802# and go under HW Device Test, then Touch Test then touch firmware version and write everything down. After that go to touch firmware upgrade and after 15 seconds compare the touch firmware version values with those you written down.
1.4 In hidden Menu you can also go to wlan test then ota setting to check if it is disabled on your phone. After that check again if there is OTA updates for your phone, and also check if there is PC suite Update.
1.5 Check your phones version if it is D802, D800 or something else, and check which rom you have installed. You can do this in settings about phone or if you are happy about hidden menu found, go there and into settings then version info. This might not be interesting or fun to do, but it will save you the trouble if something goes wrong, because you will know what to ask.
1.6 Last but not the least, before starting to flash fill up your battery, i've read some posts that say there are problems with wrong capacity shown, and a lots of battery drain problems, and only solution till now is to have a full battery on start.
2. You will need LG FlashTool and of course installed drivers for your G2 on your PC.
All of that you can get in the thread by @quangnhut123 .
2.1 Just a bit of precautions, don't forget to always copy a kdz file in to Flashtool folder and then start a tool. All should look the same as in that thread, except you should always use CSE method because with this method you will install kdz from scratch, removing everything from the phone.
2.2 You should find the kdz file which suits for your phone on site . You can check for kdz by typing in imei in check new firmware section or find the one for yourself by searching the site. v30a is lollipop open while v30d is for branded G2's.
(I've read that this site is not allowed by Xda moderators, so if I can't post it please give me info on where should we download kdz's from).
2.3 I think it's all pure logic now but lets say it one more time. You have downloaded kdz file, and put it inside LG Flashtool folder. You should now start Flashtool and get your phone into Download mode. To do this you need to hold volume up button on turned off device and connect usb cable while holding volume up. Now just cse flash.
2/3 This is troubleshooting step, if you have a problem ask and i hope this great community will help you like they did to me, and ofc I will do my best to help.
3. Now we go to rooting.
Here is the thread by @avicohh which worked for my D802.
Just follow his step by step tut and you will have a rooted phone
3.1 The only issue that might happen here is you are stuck with # and adb waiting for your phone. To resolve this just go into download mode manually.
4. Okay rooting done, now let's go to custom recovery install
It's easy as installing an app from google play by @bender_007
4.1 After installing it open the app and follow the on-screen instructions. If it fails for the first time, try it few more times, it will eventually work. (OFC. I didn't install it with only one try).
4.2 To get into custom recovery hold volume down and power button till first LG sign shows up, then release both buttons and quickly press them again. It will ask you do you want to do factory reset, press yes and yes again, and it will get you to custom recovery if you installed it.
4.2.1 If you factory reset your phone that means you didn't install recovery correctly and you will lose your data, but again that should be no problem since you have that backup from the start.
Now optional steps:
5. Install system app remover to remove bloatware from your phone. You can do it manually but this way you will have those apps backed up.
6. Next suggestion is to install a few mods if you need them. In my case I had to have a Plug and pop, since it is lost from Lollipop and I loved that feature. Here is a thread on how to install that mod by @p_a_r_s_a7
//That's all, if you have any questions feel free to ask, since there is no dumb questions, but also try to read carefully before//
Thanks to:
@quangnhut123
@avicohh
@p_a_r_s_a7
@bender_007
A lot of others whose names i can't remember. If anyone else needs to be mentioned PM me and i will add you in this section.
I will add pictures and stuff if needed
Thanks, good all-in-one thread, + easiest methods. Ill recommend it‚to others
This forum is such a mess that a thread like this is like a fresh breath of air. Every advice given on other threads references something that you should already know how it's done, or you should already have done to your phone in the past and have a certain version of it, or non-working tools that are only around for a few months until an update makes them unusable.
No wonder that most of the first-page topics, including pinned ones, have the word "brick" in the title. This should signal the forum moderators that something is wrong around here.
My phone is stock international sim-free G2, never rooted or otherwise modified and yet no one was able to offer a coherent solution of how to update to Lollipop, until your post.
So, thanks for this thread.
Thank you, that is exactly why i made the thread. Every one of those threads has everything explained, but you need to search theough 150 pages to understand how something is done. That's why i wanted to make a thread with all explanations made in a single post and to make it noob friendly since the worst thing that happens in other threads is answer like use a search you have it somewhere.
Hi,
Thanks for the thread. It really helps noobs like me, but I still have a couple of questions...
I was running Paranoid Android L rom with root, twrp and kk bootloader on My D802.
I didn't see this thread before I decided to downgrade back to 4.2.2 stock rom, and now I don't really know what steps to take.(I have kernel version 3..4.0 and build number JDQ39B)
I haven't seen an OTA available, so I was thinking of flashing new Lollipop rom kdz file. But I've been seeing stuff about using LG PC suite to upgrade via OTA so i wasn't sure.
So my main question is that do I do an OTA upgrade on my current 4.2.2 stock rom or do I download an official Lollipop rom? Can you give me a brief idea of the steps to take?
Thanks
seyio said:
Hi,
Thanks for the thread. It really helps noobs like me, but I still have a couple of questions...
I was running Paranoid Android L rom with root, twrp and kk bootloader on My D802.
I didn't see this thread before I decided to downgrade back to 4.2.2 stock rom, and now I don't really know what steps to take.(I have kernel version 3..4.0 and build number JDQ39B)
I haven't seen an OTA available, so I was thinking of flashing new Lollipop rom kdz file. But I've been seeing stuff about using LG PC suite to upgrade via OTA so i wasn't sure.
So my main question is that do I do an OTA upgrade on my current 4.2.2 stock rom or do I download an official Lollipop rom? Can you give me a brief idea of the steps to take?
Thanks
Click to expand...
Click to collapse
Updating through pc suite or ota is the best way if it is available to you. Flashing kdz is the same thing but that is doing it manually while through pc auite nad ota is pretty much automatic. Anyways which ever way you decide to use be sure to fully charge your battery and factory reset acter the update. If you need anything else feel free to ask
[email protected]$o said:
Updating through pc suite or ota is the best way if it is available to you. Flashing kdz is the same thing but that is doing it manually while through pc auite nad ota is pretty much automatic. Anyways which ever way you decide to use be sure to fully charge your battery and factory reset acter the update. If you need anything else feel free to ask
Click to expand...
Click to collapse
Do I flash KK bootloader or root before I update through ota?
seyio said:
Do I flash KK bootloader or root before I update through ota?
Click to expand...
Click to collapse
No need to flash bootloader if you didnt flash it for paranoid android. And definitely no need to root since you can root after update.
Problems with flashing KDZ
I have downloaded Spain Lolipop KDZ file for LG G2 D802.
Have backed up everything usint TWRP> ( Presently on Optimus G3 rom v 1.4.1 with dorimanx kernel and TWRP )
I have copied the KDZ file to the flash tool. When i use CSE flash .. it takes me to the next page .. in which I click on Start which then opens up the LG Mobile support tool.
Then it shows detecting ur phone .. unpacking or extracting file .. after that shows software updating .. reaches 2 % and then shows error .. asks me to retry .
Do you know what I am doing wrong ? or the cause of this prob ?
http://i58.tinypic.com/15rk2eo.png
sankeerth24 said:
I have downloaded Spain Lolipop KDZ file for LG G2 D802.
Have backed up everything usint TWRP> ( Presently on Optimus G3 rom v 1.4.1 with dorimanx kernel and TWRP )
I have copied the KDZ file to the flash tool. When i use CSE flash .. it takes me to the next page .. in which I click on Start which then opens up the LG Mobile support tool.
Then it shows detecting ur phone .. unpacking or extracting file .. after that shows software updating .. reaches 2 % and then shows error .. asks me to retry .
Do you know what I am doing wrong ? or the cause of this prob ?
http://i58.tinypic.com/15rk2eo.png
Click to expand...
Click to collapse
Had the same problem when flashing kitkat kdz. Are you sure that you have pasted kdzfile inside flashtool. If that is not the problem try other kdz. That helped me
Where are you from and more specifically whhere your phone is from so i can maybe help you with finding right kdz. And btw i think you might have a problem when trying to restore that backup so if you still can backup your phone manually or on the cloud.
[email protected]$o said:
Had the same problem when flashing kitkat kdz. Are you sure that you have pasted kdzfile inside flashtool. If that is not the problem try other kdz. That helped me
Where are you from and more specifically whhere your phone is from so i can maybe help you with finding right kdz. And btw i think you might have a problem when trying to restore that backup so if you still can backup your phone manually or on the cloud.
Click to expand...
Click to collapse
I have restored the complete back up using TWRP .... Yes i have already pasted kdz in the same folder of flash tool...still no change .. now downloading D802 20H firmware to flash stock n den again try KDZ
I have seen that some guys who had the same problem resolved it with disconnecting from network
Sent from my LG-D802 using XDA Free mobile app
sankeerth24 said:
I have restored the complete back up using TWRP .... Yes i have already pasted kdz in the same folder of flash tool...still no change .. now downloading D802 20H firmware to flash stock n den again try KDZ
Click to expand...
Click to collapse
http://www.1x1a.com/fixlg-flash-tool-stuck-at-2.html
Or maybe try this. I havent tried it so i cant promise anything but if you want you can try. Hope it helps
[email protected]$o said:
No need to flash bootloader if you didnt flash it for paranoid android. And definitely no need to root since you can root after update.
Click to expand...
Click to collapse
Hi again..
OTA update to Lollipop has failed on my D802, LG PC Suite only upgraded me from Android 4.2.2 to 4.4.2, so can anyone help me out here?
Am I missing something for OTA update? If not, then which lollipop kdz can I download for my phone so that I can flash? I live in UK and i use a 3 UK sim if that helps
but also, In the process of trying to boot into my previously installed TWRP recovery, I discovered that i have been restored to stock recovery. I have rooted the phone, but just wanted to clarify: I flash custom recovery, then bootloader/kernel then lollipop kdz?
Thanks again
seyio said:
Hi again..
OTA update to Lollipop has failed on my D802, LG PC Suite only upgraded me from Android 4.2.2 to 4.4.2, so can anyone help me out here?
Am I missing something for OTA update? If not, then which lollipop kdz can I download for my phone so that I can flash? I live in UK and i use a 3 UK sim if that helps
but also, In the process of trying to boot into my previously installed TWRP recovery, I discovered that i have been restored to stock recovery. I have rooted the phone, but just wanted to clarify: I flash custom recovery, then bootloader/kernel then lollipop kdz?
Thanks again
Click to expand...
Click to collapse
I am not sure but i think that update for the uk didnt come out yet. so you can't update to lollipop yet via pc suite or ota. and you got it all wrong. first you flash lollipop kdz but you will have to try out few of them since official for uk didn't come out yet, after that you root, and then flash custom recovery.
and as previously you will be back to stock recovery after update. you have it all explained step by step in first post. i know it is a bit long but that is the best way, since i didn't want to write stuff like "you should know that" and so on. so just follow the first post and you will be happy, or wait for official uk update over the ota you will be happy too, and i guess it should come out in a month.
[email protected]$o said:
I am not sure but i think that update for the uk didnt come out yet. so you can't update to lollipop yet via pc suite or ota. and you got it all wrong. first you flash lollipop kdz but you will have to try out few of them since official for uk didn't come out yet, after that you root, and then flash custom recovery.
and as previously you will be back to stock recovery after update. you have it all explained step by step in first post. i know it is a bit long but that is the best way, since i didn't want to write stuff like "you should know that" and so on. so just follow the first post and you will be happy, or wait for official uk update over the ota you will be happy too, and i guess it should come out in a month.
Click to expand...
Click to collapse
Thanks for the quick reply.
I'll download all the lollipop kdz's and see which one of them works for me till the UK one comes out then I'll just do a normal flash over it.
But seriously, one month for the UK ota :crying: Right now, I don't even know which is worse: Google that takes forever to release updates with so many bugs, or Apple who generally release better stable updates but make older devices laggy...
Thanks again for all the help.
seyio said:
Thanks for the quick reply.
I'll download all the lollipop kdz's and see which one of them works for me till the UK one comes out then I'll just do a normal flash over it.
But seriously, one month for the UK ota :crying: Right now, I don't even know which is worse: Google that takes forever to release updates with so many bugs, or Apple who generally release better stable updates but make older devices laggy...
Thanks again for all the help.
Click to expand...
Click to collapse
its a good update, not that buggy, and be sure to fully charge your battery before the process. you should try europe open or something like that, but there is no german or uk release yet and some guys suspect it is slowed down because they found out bugs in other versions
After CSE Flashing my d802 with a 30a, it got stock on lg logo screen, then an android screen with "erasing" on bottom, then lg screen. I let it sit for 4 hrs but nothing happened. Im back to stock kitkat atm. A little help please.
fernievidal said:
After CSE Flashing my d802 with a 30a, it got stock on lg logo screen, then an android screen with "erasing" on bottom, then lg screen. I let it sit for 4 hrs but nothing happened. Im back to stock kitkat atm. A little help please.
Click to expand...
Click to collapse
Where from is your phone? Are you sure you flashed right kdz? Did lollipop even turn off? DidCSE flashing finished sucessfully? I would like to help you, but i cant if you dont explainme what is your problem. I am not some pro who faced every error on every phoneso please explain a bit more
And i suppose that erasing screen could have been factory reset on stock recovery
[email protected]$o said:
Where from is your phone? Are you sure you flashed right kdz? Did lollipop even turn off? DidCSE flashing finished sucessfully? I would like to help you, but i cant if you dont explainme what is your problem. I am not some pro who faced every error on every phoneso please explain a bit more
And i suppose that erasing screen could have been factory reset on stock recovery
Click to expand...
Click to collapse
I believe mine is an international version. Where it came from, well, I'm from the Philippines and I got my phone from a local telecom, Globe.
The flash tool said that it was successfully upgraded, but judging from the phone's behavior I think there's something wrong. My phone never started successfully, and I got stuck in the LG logo.
Hello Verizon V10 Community,
I was able to locate the full KDZ file for the Verizon V10 software version 11B, the latest available for the VS990. I personally have the V10 and it's already on 11B but I have a friend who just received his V10 in the mail today and it had 10B on it so I plugged his into my computer and the Verizon Upgrade Assistant downloaded the 11B KDZ. I have saved it, uploaded it and am making it available anyone who may need it.
You can download it from Android File Host here in a RAR archive: https://www.androidfilehost.com/?fid=24438995911975083
Alternatively, you can download it directly from LG's servers here: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW25NOE3325BACQF4BA4K6T/VS99011B_04_ARB00.kdz
MD5 of KDZ file when downloaded from AFH (NOT the rar file): 7f971f72b81945ad1f06df56300b6bae
You will need to use LGUP to flash this KDZ, which you can download from here: https://www.androidfilehost.com/?fid=24459283995297690. After you have installed LGUP, you will need to extract the 'common' folder from the LGUP rar archive and put it in: C:\Program Files (x86)\LG Electronics\LGUP\model. (See attached screenshot) This 'common' folder contains the DLL file that is needed for LGUP to recognize the Verizon variant of the V10. There are other downloads of LGUP in other forums here in XDA which contain other installers in addition to the LGUP installer. The other installers install DLL files for other variants of the V10 which are not needed for the Verizon variant. The DLL I've included in the 'common' folder is all you need for our Verizon variant.
Enjoy
Reserved
And reserved again.
How big is the file size?
666syco said:
How big is the file size?
Click to expand...
Click to collapse
The KDZ by itself is 2.2 GB. I'll have the link ready later today as my FTP upload to AFH that I had running this morning failed and I have to start over. :-\
Thank you brother downloading now.
rustypie said:
Hello Verizon V10 Community,
I was able to locate the full KDZ file for the Verizon V10 software version 11B, the latest available for the VS990. I personally have the V10 and it's already on 11B but I have a friend who just received his V10 in the mail today and it had 10B on it so I plugged his into my computer and the Verizon Upgrade Assistant downloaded the 11B KDZ. I have saved it, uploaded it and am making it available anyone who may need it. You can download it from Android File Host here: https://www.androidfilehost.com/?fid=24438995911975083
MD5 of KDZ file (NOT the rar file): 7f971f72b81945ad1f06df56300b6bae
I've not yet tried flashing this KDZ but I'm going to assume we can use the LGFlashTool to flash this as the cool new LGUP program that has appeared recently in the G4 forums does not work with the V10. I tried it and the program won't even open when my V10 is attached to my computer. I'm guessing it needs a DLL file installed to work. If anyone knows where I can find one, please let me know.
I assure you this is not a fake. This is a genuine KDZ file downloaded directly from Verizon Upgrade Assistant. If anyone here decides to flash it, please let me know what program you used and the outcome of the process.
Click to expand...
Click to collapse
Same process I posted back in Jan about getting the .KDZ and the post to go along with it. I was unable to get the .KDZ file to flash to the phone. The version also had much userdata included in the file which is why I never released the file.
http://forum.xda-developers.com/showthread.php?p=64828296
This thread claims to have the .KDZ file directly from the LG site.
http://forum.xda-developers.com/showthread.php?p=65742064
burnsky05 said:
Same process I posted back in Jan about getting the .KDZ and the post to go along with it. I was unable to get the .KDZ file to flash to the phone. The version also had much userdata included in the file which is why I never released the file.
http://forum.xda-developers.com/showthread.php?p=64828296
This thread claims to have the .KDZ file directly from the LG site.
http://forum.xda-developers.com/showthread.php?p=65742064
Click to expand...
Click to collapse
Did you use the older LGFlashTool when you tried?
rustypie said:
Did you use the older LGFlashTool when you tried?
Click to expand...
Click to collapse
I'm not sure what version I tried but I had many different versions of the software but didn't want to run into a bricked phone and didn't have much time to spend on trying and failing with personal things going on.
LGUP isn't recognizing the KDZ file. It sees the TOT however. Any way to fix this?
EDIT: Just had to choose the Update radial instead of Refurbish.
I believe upgrade is tot only and refurbish is kdz and tot. Or vice versa.
We just got our upgrade to marshmallow is going to be possible to obtain root for it?
http://www.verizonwireless.com/support/lg-v10-update/
Just going to throw this out there. No matter what KDZ file I download, I can't get passed the Google Account setup. There's data on that file that prevents the phone from going forward and constantly loops back to the beginning of entering the Google Account previously associated with the phone before the factory reset.
Hypnosis4U2NV said:
Just going to throw this out there. No matter what KDZ file I download, I can't get passed the Google Account setup. There's data on that file that prevents the phone from going forward and constantly loops back to the beginning of entering the Google Account previously associated with the phone before the factory reset.
Click to expand...
Click to collapse
Maybe this will work
How to bypass Factory Reset Protection on Samsung devices
http://flip.it/AuQTm
Appreciate the help. Although it doesn't offer much help in the way of LG devices.
Sent from my VS990 using Tapatalk
Lg v1o bootloop
Hi guys, I'm James and I live in mexico. I'm Argentinean. A month ago I bought the LG V10 and then use it normally, one day I restarted the phone all the time and now stays at the logo screen. I know it is operational, the software system. But I took my phone to a technician famous city where I live repair and told me not found support for the cellular putting on new software. You think you can help me? Please . If necessary I will do it myself. What I find something silly and illogical is that he has not found support for the LG V10. Sorry for my English if there are errors. Thank you.
This post works to solve my problem with the LG 10 VERIZON?
Lg v1o bootloop
This process solves my problem? I have a lg v10 vs990w and restarts all the time. It is software or hardware? I can fix it? please help!
Recently I Rooted My Sprint G3 Lolipop. Had no Issues there. Then I wanted to install TWRP, So I downloaded AutoRec, waited for the app to confirm everything and installed it. When I turned my phone off and tried to reboot into recovery, it Gives me a screen that has the LG Logo and it says Security Error and turns back off. I can still go into download mode but thats all I can do.
Ive read the other posts for this problem but i havent found one for my specific Phone.
Can anybody please help me with step by step Instructions?? Im still not super expirenced in rooting phones and the other phones I have rooted have always been successful..
Sprint LG G3 5.0.1
LS990ZVC
Heres a link to that same problem. The member experiencing the issue fixed it by flashing a .tot file from a previous ZV version he went from ZVA to ZV4 u should be able to do that i believe by using the 2014 lg flash tool, look it up. While i dont like flashing different ZV versions myself i think u might be safe for the most part.
Me personally think but might be wrong so dont quote me.. Lol but i would flash using a ZVB tot/kdz in the 2014 flash tool and i believe the lg support tool will then upgrade u back to ZVC if not the LGUPtool i mean your taking it from a noob but i think i stand correct here lol
http://forum.xda-developers.com/sprint-lg-g3/help/help-security-error-t3177905
Thanks. Actually didn't even waste my time on it. I still flash and do everything else with my phone. Found out it was a authentication code or something like that. Thanks for the reply back though!!!
As the title implies , this thread will contain g8x att firmware backs ups for people to use, since we don't have kdz for our version of the g8x, these backups will hopefully help people recover phones.
If you have a backup please pm me or post it here and i will add it to the main OP. Also an easy way to dump your firmware is to use Partition Backup
If you do decide to dump your firmware, only backup slot partitions, mostly only those can be shared. Most others are device unique. (you need Bl unlock and root to dump them with this app, with firehose/qpst you dont.)
Only restore this on a Android 10 slot
Also this vendor parttion is decrypted keep this in mind while restoring it.
Firmware List:
ATT G8X 20e Android 10 (Security patch April 1st 2020)
"People cant have nice things =/. look for me on the blue old app"
If you have issues downloading let me know.
Do you have a AT&T LG G8 Android 10 dump?
Also, how would one go about using the Android 10 dump on their LG G8? (Basically how do you install it?)
wwechampian said:
Do you have a AT&T LG G8 Android 10 dump?
Also, how would one go about using the Android 10 dump on their LG G8? (Basically how do you install it?)
Click to expand...
Click to collapse
Not for att g8, i only have a g8 from sprint, im not sure how you would go about using this to upgrade from 9 to 10, i think it has to be flashed on secondary slot. i would go to the lg v50 telegram group and ask there, so you can be sure 100%
so i can only do this if i have root access on my lg g8x from at & t?
siulmagic said:
ATT G8X 20e Android 10 (Security patch April 1st 2020)
att-20e-firmware-backup-slot.7z
drive.google.com
If you have issues downloading let me know.
Click to expand...
Click to collapse
Forgive my ignorance but how does one go about using this backup to restore a bricked G8X...?
Need a step-by-step primer on this if anyone would be kind enough to teach, as I'm only familiar with KDZ's and using LGUP 1.14 Dev Mode for older LG devices...the G8X will not function with this version, so it's not straightforward
Thanks in advance
HanselCustodio said:
so i can only do this if i have root access on my lg g8x from at & t?
Click to expand...
Click to collapse
no, you can use it without root(use firehose/qpst), though my vendor is decrypted no idea how that will affect it.
siulmagic said:
ATT G8X 20e Android 10 (Security patch April 1st 2020)
att-20e-firmware-backup-slot.7z
drive.google.com
If you have issues downloading let me know.
Click to expand...
Click to collapse
Just want to offer a warning to anything thinking about using the above referenced backup - I used it myself on a soft bricked G8X (AT&T) using QFIL on EDL/9008 mode to upload the unpacked IMG's. I went from soft brick to hard brick.
When I first started off using this I uploaded only the system, boot and abl...when I started seeing a fastboot screen (which I hadn't seen since) I felt like I was moving in the right direction so I uploaded the remaining partitions. After exiting EDL the device refuses to turn on...no LG splash, no android warning, no longer any access to download mode. No amount of button pushing brings EDL mode back while connected via USB. Doesn't charge using wireless charger (which it used to before).
I'm very confident I did not mismatch any partitions, though uploading the OP image did mention that there was data overflow and asked me if I wanted to continue. Further, this backup did not contain all of the img's that would ordinarily be present in a KDZ, but contained imgs that a standard KDZ do not have.
Since I can't get to EDL I can't restore the backups I had made of it's previous soft-bricked state.
It's just really frustrating, and I've learned my lesson never to buy a device from a carrier that doesn't allow access to it's KDZ firmware file (or cannot be crossflashed to one that does).
Your mileage may vary of course but I definitely feel like I'd want to stop someone from trying the attached if they're still in a soft-bricked state.
As an aside I would appreciate anyone who might have any ideas of how to reach EDL mode again. Thanks
cliffswallow said:
Just want to offer a warning to anything thinking about using the above referenced backup - I used it myself on a soft bricked G8X (AT&T) using QFIL on EDL/9008 mode to upload the unpacked IMG's. I went from soft brick to hard brick.
When I first started off using this I uploaded only the system, boot and abl...when I started seeing a fastboot screen (which I hadn't seen since) I felt like I was moving in the right direction so I uploaded the remaining partitions. After exiting EDL the device refuses to turn on...no LG splash, no android warning, no longer any access to download mode. No amount of button pushing brings EDL mode back while connected via USB. Doesn't charge using wireless charger (which it used to before).
I'm very confident I did not mismatch any partitions, though uploading the OP image did mention that there was data overflow and asked me if I wanted to continue. Further, this backup did not contain all of the img's that would ordinarily be present in a KDZ, but contained imgs that a standard KDZ do not have.
Since I can't get to EDL I can't restore the backups I had made of it's previous soft-bricked state.
It's just really frustrating, and I've learned my lesson never to buy a device from a carrier that doesn't allow access to it's KDZ firmware file (or cannot be crossflashed to one that does).
Your mileage may vary of course but I definitely feel like I'd want to stop someone from trying the attached if they're still in a soft-bricked state.
As an aside I would appreciate anyone who might have any ideas of how to reach EDL mode again. Thanks
Click to expand...
Click to collapse
You will have to open the back and short some contacts.
Or give to service center if in warranty.
[QUOTE = "lefttobleed, publicación: 84319395, miembro: 2516025"]
Tendrás que abrir la parte trasera y cortar algunos contactos.
O entréguelo al centro de servicio si está en garantía.
[/CITAR]
Lo hiciste ??
Can anyone dump they're .xml partition data file? I am very desperate as my devices partitions are missing. Please help! Cheers!
cliffswallow said:
Just want to offer a warning to anything thinking about using the above referenced backup - I used it myself on a soft bricked G8X (AT&T) using QFIL on EDL/9008 mode to upload the unpacked IMG's. I went from soft brick to hard brick.
When I first started off using this I uploaded only the system, boot and abl...when I started seeing a fastboot screen (which I hadn't seen since) I felt like I was moving in the right direction so I uploaded the remaining partitions. After exiting EDL the device refuses to turn on...no LG splash, no android warning, no longer any access to download mode. No amount of button pushing brings EDL mode back while connected via USB. Doesn't charge using wireless charger (which it used to before).
I'm very confident I did not mismatch any partitions, though uploading the OP image did mention that there was data overflow and asked me if I wanted to continue. Further, this backup did not contain all of the img's that would ordinarily be present in a KDZ, but contained imgs that a standard KDZ do not have.
Since I can't get to EDL I can't restore the backups I had made of it's previous soft-bricked state.
It's just really frustrating, and I've learned my lesson never to buy a device from a carrier that doesn't allow access to it's KDZ firmware file (or cannot be crossflashed to one that does).
Your mileage may vary of course but I definitely feel like I'd want to stop someone from trying the attached if they're still in a soft-bricked state.
As an aside I would appreciate anyone who might have any ideas of how to reach EDL mode again. Thanks
Click to expand...
Click to collapse
This should only be used mostly to restore certain parttion, not the whole backup in one go, as you said this is not a kdz. Also messing with op partition is never recommended, edl did warn you of the parttion size mismatch. Also depends what you had on your primary slot, i would not recommend flashing this on a pie slot. Sucks that you hard bricked.
Need dump full G8X ATT, thank all, I need all partitions except the userdata partition, please help me, thanks
Hey guys, I'm really needing firmware to G850UM10F AT&T. Any one sees this variant come across their screen on a Telegram group or in their searches let me know please.
#Rooty_Mikes# said:
Hey guys, I'm really needing firmware to G850UM10F AT&T. Any one sees this variant come across their screen on a Telegram group or in their searches let me know please.
Click to expand...
Click to collapse
did you find one? I'm looking for a firmware in android 9 for at&t
siulmagic said:
As the title implies , this thread will contain g8x att firmware backs ups for people to use, since we don't have kdz for our version of the g8x, these backups will hopefully help people recover phones.
If you have a backup please pm me or post it here and i will add it to the main OP. Also an easy way to dump your firmware is to use Partition Backup
If you do decide to dump your firmware, only backup slot partitions, mostly only those can be shared. Most others are device unique. (you need Bl unlock and root to dump them with this app, with firehose/qpst you dont.)
Only restore this on a Android 10 slot
Also this vendor parttion is decrypted keep this in mind while restoring it.
Firmware List:
ATT G8X 20e Android 10 (Security patch April 1st 2020)
att-20e-firmware-backup-slot.7z
drive.google.com
If you have issues downloading let me know.
Click to expand...
Click to collapse
Can you unblock bootleader g8x att android 9?
Duythiem said:
Can you unblock bootleader g8x att android 9?
Click to expand...
Click to collapse
I believe to unlock bootloader for any variant you have to be on 10.
conbak49 said:
I believe to unlock bootloader for any variant you have to be on 10.
Click to expand...
Click to collapse
However, i don't have firmware android 10, because i live outside the USA....
Duythiem said:
However, i don't have firmware android 10, because i live outside the USA....
Click to expand...
Click to collapse
Only thing I know to suggest is ask in this thread: https://forum.xda-developers.com/t/...nlock-and-magisk-root-using-firehose.4221793/
i was able to unlock the bootloader on android 9
yoctan1 said:
did you find one? I'm looking for a firmware in android 9 for at&t
Click to expand...
Click to collapse
I might still have a copy on my drive if you still need it