So i installed huawei mediapad t3 10 ags-l09 in my car as multimedia system. I have it rooted. Everything is fine but when usb power comes on and tablet is off it boots to charging screen and i have to press power button to start. Ive tried the playlpm file stuff and everything but i cant get the charging screen turned off. I got it working with samsung s8 but it doesnt seem to work with huawei. I rly need help.....
Related
Ematic Eglide Xl Pro(not the XL Pro 2) Model: EGLXP101B(I could be wrong) upc:817707010269
I recieved this tablet this way and without a charger but my charger works.
I believe this tablet is bricked but it may have bad hardware and I cannot find info on how to fix this.
With Nothing connected and no external memory installed it will boot to the black android screen in pic 2 and freeze there untill I hold power about 5sec. to power off.
With only external memory installed it freezes on the splash screen in pic 1. If I press power for 1 sec. it continues to boot to black android screen in pic 2 and freezes there untill I hold power about 5sec. to power off.
-I have connected it to my windows xp pro computer and the computer did install something for a driver but as you can see in pic 3, the tablet shows up in my computer as 6 removable disks, H, I, J, K, L, and M. I cannot access any of them. I also tried ADT Bundle but it wont recognize tablet either.
I think I need to get windows to recognize tablet first but how can I do that?
If tablet has a hardware issue will windows even be able to detect the tablet?
Maybe I posted in the wrong spot, don't seem to get any help.
Rybeck74 said:
Ematic Eglide Xl Pro(not the XL Pro 2) Model: EGLXP101B(I could be wrong) upc:817707010269
I recieved this tablet this way and without a charger but my charger works.
I believe this tablet is bricked but it may have bad hardware and I cannot find info on how to fix this.
With Nothing connected and no external memory installed it will boot to the black android screen in pic 2 and freeze there untill I hold power about 5sec. to power off.
With only external memory installed it freezes on the splash screen in pic 1. If I press power for 1 sec. it continues to boot to black android screen in pic 2 and freezes there untill I hold power about 5sec. to power off.
-I have connected it to my windows xp pro computer and the computer did install something for a driver but as you can see in pic 3, the tablet shows up in my computer as 6 removable disks, H, I, J, K, L, and M. I cannot access any of them. I also tried ADT Bundle but it wont recognize tablet either.
I think I need to get windows to recognize tablet first but how can I do that?
If tablet has a hardware issue will windows even be able to detect the tablet?
Maybe I posted in the wrong spot, don't seem to get any help.
Click to expand...
Click to collapse
I feel your pain; the eglide is sort of kluged together by some guys in a garage in China. I rooted mine, installed Google play and some games and a lot of apps. The battery jack is loose and almost useless now. The battery dies after 1/2 an episode of Fringe.
I suspected the added apps were running in the background and draining the battery; I was planning to reset it to wipe out all and see if that regained my battery life. But it's now stuck in an endless splash screen loop, so I'm feeling stuck as well.
I'm going to try tinkering while it's hooked up to Android Commander on my Win 7 PC; possibly get some progress going. I'l post again if I find success.
You might try Android Commander as well: mine shows in Explorer as two Removable drives, but in Android Commander I can see the root directory and navigate and install apps. That might bail you out.
If you hold the power and volume up down, it will boot you into a diag screen; in Chinese. I'll let you know what happens when you start pressing random Chinese menu items if I get desperate.
I have problems with my Allwiner A13B tablet. It wont start at all. I had a bootloop problem, so i flashed the tablet wiht LiveSuit. After the flash everything was ok, only the touch was working opposit but i've found a fix for that. I was cheking the options to see if all of the others features are fine, but i didnt had much of a battery and the battery died and tablet turned off. I've tried to turned on ever since but with no luck. The combination of the buttons (VOL + & PWR) won't work. I've tried to hold for 30 sec the PWR buton and plugged in then press the power button for 3 sec to try to start the tablet but nothing happends, not even with the reset button in the little hole. The blue LED light was working when i plugged but 4 hours later it stopped. I just leaved my tablet not plugged in for 2 hours then i plugged in and the light start to work again but 2 hours later it stopped. When i plug in the device in my pc and try to launch LiveSuit the update process starts but after few second fails and the PC says that the device i've connected has a malfunction. Please help me if you can.
come on guys help me please
Hi there,
I bought this MiPad about 4 months ago and it was all working properly till yesterday. And all of a sudden, I saw the fast boot screen showing up on the screen. I was clueless as why that screen was showing up without me doing anything. I didn't know what to do and pressed power button (maybe that was the mistake I did). Now the device is turned off and not turning on at all. I tried many ways to turn it on, but failed till now. I have tried -
- Holding the Power button for quite a while.
- Holding a combination of Volume buttons and Power button.
- Charging it overnight and trying the above two steps. (though connected to the charger, no notification lights showed up)
- When searching for solutions, came across this thread in some forum. Tried this as well, but no results. (http://forum.xda-developers.com/ ... ve-totally-t3417604)
When I connect and disconnect the device to my laptop through USB cable, I can hear the Windows beep sound, but does not detect it (I mean, it won't be displayed in either MiFlash, MiPCSuite tools or in the Windows file explorer).
If anybody has a solution for this, please help. Thanks.
OK, I broke my Amligic S905 device a few weeks ago by flashing something I shouldn't have with TWRP recovery. I was able to get it working again with the USB Burning tool and everything works fine now except for 2 things, The button inside the A/V port seems to no longer be working (holding it in while turning on does nothing, does not boot to recovery, boots normal), It worked fine before I messed up and fixed the software, hasn't worked since I got it going again. The only way I can enter recovery is with a reboot app once the device is already on. I suppose it could be the button itself that went bad but seems to be too much of a coincidence. Also since all this happened, the device will no longer respond to the power button on the remote when it is powered down, I have to unplug the box every time I want it to boot up, once booted, the remote works fine and normal, and I can use the power button to turn it off, but will not work to turn it back on. ANY ideas on what may be wrong here? The software used to fix the box is not the factory software, but I dont see how this should effect the button, or maybe it does?
Hello everyone,
i got a problem with my z ultra and have tried looking similar problem on this forum but none of the solution seems working.
Please note that i have a stock phone, never did anything to it including unlocking rooting etc as i have no idea what it is, just casual usage.
So the problem occured when i tried to move an apps from sd card to my internal storage, and then my phone freezed midways,
the phone went unresponsive just showing the freezing screen.
Then i pushed the red button near the sim tray hoping the phone will reboot as i had similar problem before, and thought that it was just another minor problem and it worked.
But this time after pushing the red button the phone wont reboot again after i try to turn it on again using the power button, only a vibration but the screen showed no display whatsoever.
Ive been looking a solution on this forum with similar problem and there was a suggestion to connect the phone to power source and push the power and + vol together but there was only vibration thrice without indication of my problem has been solved.
Ive also tried a solution on youtube to disconnect the power cable, charge it to power source, wait for the Red LED to blink and reconnect the power cable again but it wasnt working.
Long story short after trying several method now my phone only blinking Red LED 3 times when i tried to turn it on, i tried to charge it to full but the Red LED keeps showing on even after i discharged it, so i had to push the power and + vol button to turn it off.
I suspect that my phone is hardbricked looking at the symptomps
Please anybody here could help me to fix it?
It's probably not hard-bricked.
Try this,
1, connect your USB cable to PC (without phone connected to it )
2, press volume up button and then plug in the usb cable to your phone
3, if light goes blue colour then you are back in business and you can still revive your phone
step 3 if successfull means your phone is up with fastboot mode and you can upload a recovery via flashtool
let me know your results ,
rgds