Related
Hi everybody from Quebec city
My Bip watch is is with firmware 0.1.0.86
How could I show the record tracking on my walking on Google earth or other ?
I'm on Mac and I have a android phone to "sync" with Mi-Fit and Notify & Fitness app install
(android 5.X)
You can export the .tcx file on Notify and Fitness app, then import it into whatever mapping software you want.
How?
Seem we have many version of Notify and Fitness. What is the version I need and where do I "extract" GPS tracking ?
Thanks in advance
pinkabou said:
Seem we have many version of Notify and Fitness. What is the version I need and where do I "extract" GPS tracking ?
Thanks in advance
Click to expand...
Click to collapse
Notify and Fitness fior Amazfit
Pro version is needed to see the content of the messages.
For exporting, just open the activity in the app.
On the top right, there is a 3 dot menu
Synchr with others apps
You have 4 choices : Google fit, Export tcx, Strava or RunKeeper
Big Thanks
Kéno40 said:
Notify and Fitness fior Amazfit
Pro version is needed to see the content of the messages.
For exporting, just open the activity in the app.
On the top right, there is a 3 dot menu
Synchr with others apps
You have 4 choices : Google fit, Export tcx, Strava or RunKeeper
Click to expand...
Click to collapse
I finally be able to sync and export to my iMac and see my run on google earth app
Seem precise for the recording
I'm happy
but how I can do it on iOS?
ciopik said:
but how I can do it on iOS?
Click to expand...
Click to collapse
You sadly can´t - so I sold my iPhone X and bought an Android phone
Now I can sync any TCX file with or without GPS to Endomondo etc. or directly to Strava from Notify & Fitness and from there automatically to most other platforms through the website Tapiriik.
FREE
I guess everybory already spent their money on the Notify and Fitness Pro.
But for those who want to know, i have found a Free Way.
Install these apps: Gadgetbridge and GPX Viewer.
In Gadgetbridge you will open the activity and choose the GPX Viewer.
And that's it. Now your .gpx file is in the GPX Viewer folder.
(Gadgetbridge is still a work in progress, but i succeeded here)
Hi,
for those using Notify & Fitness. I also use this app, but I have observed a problem in the 1st km statistics when running. Strava will show between 30-40 seconds less for first km compared to what the watch shows, or what you can see in Mi Fit or Notify.
When I export activity to tcx file, I see that first tracking points, aproximately first 200-300 meters, always has same time stamp, and that is causing problems in Strava. So far I dont know if this is a problem of how Notify & Fitness export data, or is the watch that is doing it wrong, any idea?
Thanks
iPhone/ iPad supported !
Joost39/2 said:
You sadly can´t - so I sold my iPhone X and bought an Android phone
Now I can sync any TCX file with or without GPS to Endomondo etc. or directly to Strava from Notify & Fitness and from there automatically to most other platforms through the website Tapiriik.
Click to expand...
Click to collapse
Found 'AmazTools' in the Apple App store recently, and it works well on latest BIP s/w version !! Including GPX/ Strava/ loads of WatchFaces, and extra button functions. Give it a try!
Vinicius_Gonzo said:
I guess everybory already spent their money on the Notify and Fitness Pro.
But for those who want to know, i have found a Free Way.
Install these apps: Gadgetbridge and GPX Viewer.
In Gadgetbridge you will open the activity and choose the GPX Viewer.
And that's it. Now your .gpx file is in the GPX Viewer folder.
(Gadgetbridge is still a work in progress, but i succeeded here)
Click to expand...
Click to collapse
Thanks, it's still working, but I had to set in Mi Fit my Amazfit Bip as visible BT device, then pairing with Gadgetbridge was ok.
Hello @Vinicius_Gonzo & @adrianfp
Vinicius_Gonzo said:
I guess everybory already spent their money on the Notify and Fitness Pro.
But for those who want to know, i have found a Free Way.
Install these apps: Gadgetbridge and GPX Viewer.
In Gadgetbridge you will open the activity and choose the GPX Viewer.
And that's it. Now your .gpx file is in the GPX Viewer folder.
(Gadgetbridge is still a work in progress, but i succeeded here)
Click to expand...
Click to collapse
I tried GB but i had somekind of offset in GPS trace, did you experienced the same..?
adrianfp said:
Hi,
for those using Notify & Fitness. I also use this app, but I have observed a problem in the 1st km statistics when running. Strava will show between 30-40 seconds less for first km compared to what the watch shows, or what you can see in Mi Fit or Notify.
When I export activity to tcx file, I see that first tracking points, aproximately first 200-300 meters, always has same time stamp, and that is causing problems in Strava. So far I dont know if this is a problem of how Notify & Fitness export data, or is the watch that is doing it wrong, any idea?
Thanks
Click to expand...
Click to collapse
Trying N&T i get a slight difference, here are stats :
- mi fit : 3.87kms / 14min43sec
- N&T : 3.88kms / 15min03sec
- Strava : 3.87kms / 14min17sec
Haven't much other tracks, i'll try, is it alike what you experienced..?
Further informations here : https://forum.xda-developers.com/showpost.php?p=78148443&postcount=78
Thanks in advance for insight
Regards
Hello @Vinicius_Gonzo
That kind of offset : see attachment
I didn't used gpx viewer but took directly gpx file from Android/data/ee.aegrel.gadgetbridge/files
Thx
Hi,
What's the easiest way to export GPS data to a PC? I have Android phone, not iOS.
Also, how long will be battery last with GPS recording? What's the record frequency (1 pt per second, etc)? And how much data can it hold (e.g. 10 hours)?
Thanks
Hi, have you found a solution? I will only use gadgetbridge and not mi-fit (data-collector)
Hi !! Have you try to use ZEPP App for connect AMAZFIT BIT to Strava ??
Thanks for the tip, it works just fine, I have a question though: the workouts in Gadgetbridge are all off by 1 hour, so my Strava runs aren't in sync with my friend' tracks, have you met this isuue?
Hello,
I just received my Stratos English Version and was trying to sync my activity with Strava. The Accounts are linked into the Amazfit Watch App, but no sync happen. I tried with Walk, Run, nothing happen.
I also tried to pair MiFit App with Amazfit Watch, but also, nothing happen, it simply opens Amazfit Watch app and no pairing is happening.
I wanted this pair to be able to sync Steps with Apple health. I read that on the pace, the firmware needed to be Chinese ?
Thanks in advance
So I solved one of the 2 problems ..... I saw that my 2 IDs were different in Mi fit and amazfit, so I created account again this time with google sign in. I have the same account ID on both apps.
The sync to Strava is working, but I still cannot pair with Mifit ....
You will not be able to pair International version with MiFit. Only Chinese version pairs with MiFit, but it does not have Strava.
is there a way to extract and sync steps with apple health on the international version ?
I have my Pace synced with both MiFit and Amazfit international versions, I've used a Google account as well. You may need to activate apps listing to fire up "BLE connect" to show the QR code to pair without reseting the watch (unpairing in Amazfit app will reset the watch). Or, if doesn't work, install the Chinese version to pair watch, then remove, then go to international version again (may be complicated on iOS, I did this on Android).
when I put the chinese version of amazfit, it cannot read the QR Code .... it put always scan failed
lfom said:
IYou may need to activate apps listing to fire up "BLE connect" to show the QR code to pair without reseting the watch .
Click to expand...
Click to collapse
How do you do this ?
chocorem said:
How do you do this ?
Click to expand...
Click to collapse
There are apps and tutorials about it elsewhere, but basically you push an empty text file named "launcher_config.ini" to /sdcard/ on watch. You can also use a third party launcher as QuickLauncher as well, or any other method to open the app, of course.
lfom said:
There are apps and tutorials about it elsewhere, but basically you push an empty text file named "launcher_config.ini" to /sdcard/ on watch. You can also use a third party launcher as QuickLauncher as well, or any other method to open the app, of course.
Click to expand...
Click to collapse
I think it is different on the stratos, because I cannot see a sd card folder on the watch
lfom said:
I have my Pace synced with both MiFit and Amazfit international versions, I've used a Google account as well. You may need to activate apps listing to fire up "BLE connect" to show the QR code to pair without reseting the watch (unpairing in Amazfit app will reset the watch). Or, if doesn't work, install the Chinese version to pair watch, then remove, then go to international version again (may be complicated on iOS, I did this on Android).
Click to expand...
Click to collapse
But the main problem comes from the fact that I cannot scan the QR Code from the Chinese version of amazfit ....
chocorem said:
But the main problem comes from the fact that I cannot scan the QR Code from the Chinese version of amazfit ....
Click to expand...
Click to collapse
Even with a different account and/or after resetting the watch?
Yes, I log in the International version with Google, in the chinese version I have a xiaomi Account with a different User ID.
I tried to reset the watch, delete the bluetooth profile in the phone.does not matter, always a pair error.
May be they have disabled the ability to pair an international watch with the chinese amazfit ?
chocorem said:
Yes, I log in the International version with Google, in the chinese version I have a xiaomi Account with a different User ID.
I tried to reset the watch, delete the bluetooth profile in the phone.does not matter, always a pair error.
May be they have disabled the ability to pair an international watch with the chinese amazfit ?
Click to expand...
Click to collapse
I don't know, I have a Pace, but it worked. Try creating a new account for the CN version, sometimes it lets it pair again.
chocorem said:
Yes, I log in the International version with Google, in the chinese version I have a xiaomi Account with a different User ID.
I tried to reset the watch, delete the bluetooth profile in the phone.does not matter, always a pair error.
May be they have disabled the ability to pair an international watch with the chinese amazfit ?
Click to expand...
Click to collapse
Try set the region to China.
Sent from my iPad using Tapatalk
Sorry I forgot to mention this, but I had set the region to China !
on IOS to switch to China version of the Amazfit software, you simply have to switch Region of the iPhone
Hi,
Can you tell me the diameter of the watch ? I can not see this specification nowhere ???
the overall diameter is about 47mm ... If you want one, I can sell you mine, the sport integration is not complete enough for me.... I'm living 80 kms from you
What a shame I ordered one just 4 days ago from AlliExpress
I have also a Fenix3, complete for sport but a little too big for daily use
To Scan the QR Code I had to dowload the Chineese version App on Store. QR code was not detected with the EN/EU version App.
Worked for me English version with English app.
Was toying with purchasing one of the above smartwatches, until I discovered that there is no support for the Endomondo app...
is there anyway to side-load the Endomondo app or a way to export the data from the Amazfit and then import into my Endomondo workout web page??
cheers for any insights... :good::good:
Davyg57 said:
Was toying with purchasing one of the above smartwatches, until I discovered that there is no support for the Endomondo app...
is there anyway to side-load the Endomondo app or a way to export the data from the Amazfit and then import into my Endomondo workout web page??
cheers for any insights... :good::good:
Click to expand...
Click to collapse
Yes, there is, from Stratos you can upload your sessions to STRAVA and than you can for example on fitnesssyncer.com synchronize strava with Endomondo and get your data to Endomondo. At lease running and cycling data could by also exported from Stratos to GPX file directly in watches and these files could be imported to Endomondo.
cheers bud..much appreciated ... :good::good::good:
Tentei said:
Yes, there is, from Stratos you can upload your sessions to STRAVA and than you can for example on fitnesssyncer.com synchronize strava with Endomondo and get your data to Endomondo. At lease running and cycling data could by also exported from Stratos to GPX file directly in watches and these files could be imported to Endomondo.
Click to expand...
Click to collapse
just been doing more reading up on what you said...... it appears that only activity that requires GPS can be saved/exported to/from the Amazfit Stratos or Pace , hopefully this will be corrected in a future firmware update....Possibly...:good:
Davyg57 said:
just been doing more reading up on what you said...... it appears that only activity that requires GPS can be saved/exported to/from the Amazfit Stratos or Pace , hopefully this will be corrected in a future firmware update....Possibly...:good:
Click to expand...
Click to collapse
Yes, this should be possible as basic functionality on this device. Also Amazfit 1 do not have this option.
But on this forum there was a script that could export data directly from sport_data.db on watch ( when rooted ). Man that was doing this is fzelle. Unfortunately this script is no longer works on Stratos. I hope he will find some thime and update it for Stratos purpose
Stratos - Strava - Endomondo
Davyg57 said:
Was toying with purchasing one of the above smartwatches, until I discovered that there is no support for the Endomondo app...
is there anyway to side-load the Endomondo app or a way to export the data from the Amazfit and then import into my Endomondo workout web page??
cheers for any insights... :good::good:
Click to expand...
Click to collapse
Hi, try tapiriik.com service - first year for free, next years by 5 USD per year. It can automatically synchronise activities between many sport apps. So when your activity will be sent to Strava, in some minutes it can be automatically in Endomondo. I use it for synchronise Strava - Runkeeper - Smashrun.
You can also try FitnessSyncer.com (free AFAIK) or export the activities manually using AmazeBackup and import to any service that accepts GPX/TCX.
I usually use my Pace with Endomondo, when i finish a run i save the session then from "Activities" screen i export in a .gpx file and connect my Amazfit to my pc. From Endomondo page ( pc ) i select "import from file" and i simply select and import the created .gpx file. Sorry for my bad english, i hope you can understand.
Hello,
is it possible to edit the GPS trail directly in Amazfit app? Yesterday, when I was running, GPS made a quick jump and added me nearly 1 km to my trail...
I can do it in Runkeeper, but I would like to have the correct values in Amazfit as well...
The same thing happened to me a couple of days ago. My Pace GPS jumped me a few km away and then got the correct position a few minutes later. In all, it added 5 km to my route.
Currently it's not possible. You can however export the activity as GPX (or use AmazeBackup to export data to GPX or TCX), edit the file and then import it manually to a third party service like Strava or Endomondo. You can check the exported file using this web app: mygpsfiles.com.
lfom said:
Currently it's not possible. You can however export the activity as GPX (or use AmazeBackup to export data to GPX or TCX), edit the file and then import it manually to a third party service like Strava or Endomondo. You can check the exported file using this web app: mygpsfiles.com.
Click to expand...
Click to collapse
Thanks, I know all this, what I miss is the possibility to import it back to Stratos...
You could edit the SQLite Database.
Look at the export thread in this forum how to get it
Hi Everybody, I was looking many threads to find solution and I have noticed many people looking for the same, but I have not found final solution, can anybody help me. Is it possible to do it, as it is with garmin or wahoo fitness where I can import heart activities without any problem.
Kind Regards
Use AmazeBackup to extract the data as TCX, when import them in the service you use. You can "semi-automate" this using AmazeBackup + DropBox + FitnessSyncer.