Hi everyone
I'm trying to root my pixel 4 just updated to Android 11 (September Security Patch) via Magisk.
As I recently read in XDA, there was a post about only Canary version would work for rooting my device, so I proceed to install it for patchin the boot.img from the image I downloaded from Google.
After I patched and try to install it via fastboot, my phone doesn't pass the Google icon when turning on, and only installing the original (unalterated) boot.img again solve the problem, but my objetive is root so is half solution.
I didn't find any thread about this error with Magisk, so if someone knows a reason behind this or maybe I should try something different please tell me, I need to root my phone for using Soli (my country doesn't support it).
Thanks in advance!!
SOLVED!!
Someone told me the problem was activating the canary version of Magisk on setting (I didn't know about it) Just check if the version is Canary 20424, and it should work as intended. (Patch the boot.img, install it via fastboot normally)
Can you send me your patched boot.img file? I am doing everything and I can't seem to get it rooted. Using the Magisk Canary build.
plisk3n said:
Can you send me your patched boot.img file? I am doing everything and I can't seem to get it rooted. Using the Magisk Canary build.
Click to expand...
Click to collapse
http://ul.to/latfqu57
Thanks!
Jesus1988 said:
http://ul.to/latfqu57
Click to expand...
Click to collapse
I used this boot image and neither work. any idea?
EDIT:
I do a full flash and re flash the modified boot and work
caballero221 said:
I used this boot image and neither work. any idea?
Click to expand...
Click to collapse
I followed this Guide:
i5lee8bit said:
...
Click to expand...
Click to collapse
The only difference is to patch the boot.img with canary version of magisk.
Working with latest canary.
Make sure your system is stock with no magisk installed, then extract the boot img from the factory image and patch it from magisk, then flash it from fastboot with command "fastboot flash boot magisk_patched.img --slot=all" and reboot
No more bootloop (since fresh install), but magisk Canary don't recognize the root. Appears N/A in the installed section
EDIT:
its works now, i flash and reflash a lot of times, at the same way, but finaly one works idk why, but I'm happy
Will this work with US carriers?
KJRob said:
Will this work with US carriers?
Click to expand...
Click to collapse
Why not?
This says magisk won't work on us carrier versions.
https://www.xda-developers.com/google-pixel-4-root-magisk/
KJRob said:
This says magisk won't work on us carrier versions.
https://www.xda-developers.com/google-pixel-4-root-magisk/
Click to expand...
Click to collapse
U can't unlock bootloader is the culprit.
On the October version, could anyone get a root?
Yes. I have Problems with the october Update too.
I patched the original boot.img and than flashed the patched magisk-boot.img on All Slots
But than it says in fastboot: no valid Slot too Boot
Whats wrong
sasory said:
On the October version, could anyone get a root?
Click to expand...
Click to collapse
Yes without any problems
so this is the only way till we havea working twrp for the device so that we can go further then this with the device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
请问面具21版本安卓11。版本号:RP1A.201105.002 这种情况可以降级面具吗?降级到20.4版本
Related
Guys
Official TWRP 2.8.7.0 has just been released for the OnePlus 2. Should work on all variants.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: you install at your own risk. Do not try to install this on any other devices.
I have worked with Dees_Troy to get a build out for the OnePlus 2. Download available here: https://twrp.me/devices/oneplustwo.html
Please test and let us know if there are any issues. Should work with all three devices. I currently have a2001 64gb.
Current version of TWRP will flash OTA's. I have tested this.
if anybody wants to become a device maintainer let us know. You need required skills to build TWRP from source.
Reserved
Is Device Encryption supportet in this build?
I haven't tested that yet, not something I would normally use.
works on A2003 64gb! thanks!
There's an issue with the device name of recovery. Currently it's "oneplus2" which prohibits OTAs from being installed because it requires device name to be "OnePlus2". (Case sensitive)
ansysic said:
Is Device Encryption supportet in this build?
Click to expand...
Click to collapse
seems to be not :'-(
so i can't update to 2.1 ...
did anyone have the stock recovery ? and will wit work with it ?
Meneco87 said:
works on A2003 64gb! thanks!
Click to expand...
Click to collapse
Confirmed.
Quote:
Originally Posted by Meneco87
works on A2003 64gb! thanks!
Quote:
Originally Posted by Gamm86
Confirmed.
Confirming the confirmation
SpiritBreak3r said:
There's an issue with the device name of recovery. Currently it's "oneplus2" which prohibits OTAs from being installed because it requires device name to be "OnePlus2". (Case sensitive)
Click to expand...
Click to collapse
I'll see if I can get that updated!!
works on A2001 64gb thanks
Stephen said:
if anybody wants to become a device maintainer let us know. You need required skills to build TWRP from source.
Click to expand...
Click to collapse
what skill is require to become a device maintainer?
[email protected] said:
what skill is require to become a device maintainer?
Click to expand...
Click to collapse
You need to be familiar with building twrp from source. Meaning, you're grabbing the device tree from github and merging it with the twrp sources.
@Stephen: As soon as I get a new PC (should be somewhere around next month, maybe November), I could help out once I got my build environment set up.
threre is not a "oneplus 2" device in the App
danilos2k said:
threre is not a "oneplus 2" device in the App
Click to expand...
Click to collapse
Not in the TWRP app, it needs to be updated first I guess. But you can download and flash it using Flashify.
I was just about to ask about encryption support. Looks like only way to update is with an otg cable but my USB c adapter hasn't come yet.
I have this TWRP 2.8.7.0 version, installed on my OP2 64GB A2001 since about a month ago.
So? What is actually new here? Should I install the "new" version over the same
version, that is already installed on my device?
Hi! For some reason i can't get TWRP to stick
i can boot into using fastboot boot twrp.img but using fast boot flash recovery twrp.img doesn't stick ....original recovery always come back.
thanks!
Joao Oliveira said:
Hi! For some reason i can't get TWRP to stick
i can boot into using fastboot boot twrp.img but using fast boot flash recovery twrp.img doesn't stick ....original recovery always come back.
thanks!
Click to expand...
Click to collapse
Try to flash using flashify.
Tapped from my ❶+❷
Hi, everyone i have a moto z xt-1650-03 running Android 7.0, i have problems with the wifi & bluetooth. So i try to install ROM STOCK Android 6.0 but in mode fastboot says: Prevalidation Flash Failure Downgrade, but i have bootloader unlock
help please thanks
Broker99 said:
Hi, everyone i have a moto z xt-1650-03 running Android 7.0, i have problems with the wifi & bluetooth. So i try to install ROM STOCK Android 6.0 but in mode fastboot says: Prevalidation Flash Failure Downgrade, but i have bootloader unlock
help please thanks
Click to expand...
Click to collapse
You cannot go back to 6.0 because the bootloader is now for 7.* I would advise you to flash stock 7.0 again and follow the upgrade path to 7.1.1 found here:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
Alternatively, you could flash a custom ROM. If you use Moto Mods then you can flash Resurrection Remix with Mods support.
lollyjay said:
You cannot go back to 6.0 because the bootloader is now for 7.* I would advise you to flash stock 7.0 again and follow the upgrade path to 7.1.1 found here:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
Alternatively, you could flash a custom ROM. If you use Moto Mods then you can flash Resurrection Remix with Mods support.
Click to expand...
Click to collapse
No, it does not work in the configuration wifi says: Disabled when i try to power on make a infiniti loop trying power on, also the mac adress says: 00:02:00:00:00 because i try install stock rom 6.0
Broker99 said:
No, it does not work in the configuration wifi says: Disabled when i try to power on make a infiniti loop trying power on, also the mac adress says: 00:02:00:00:00 because i try install stock rom 6.0
Click to expand...
Click to collapse
Yes I know. You must flash stock 7.0 firmware. Can you get into the bootloader?
If your phone is bricked then use this
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
No the pone is no bricked, but i try install 7.0 it does not work see this SS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
res
Broker99 said:
No the pone is no bricked, but i try install 7.0 it does not work see this SS
res
Click to expand...
Click to collapse
It looks like you did an incomplete fastboot flash.
It is a long and tedious process but here is a windows batch file that automates it:
https://drive.google.com/file/d/0B3gcDbDvV4Mkc1JJR0J3ZWh6a3M/view?usp=drivesdk
Another solution is to flash this https://forum.xda-developers.com/moto-z/development/rom-erfanrom-flashable-zip-t3646962 in TWRP DO FULL WIPE FIRST
lollyjay said:
It looks like you did an incomplete fastboot flash.
It is a long and tedious process but here is a windows batch file that automates it:
https://drive.google.com/file/d/0B3gcDbDvV4Mkc1JJR0J3ZWh6a3M/view?usp=drivesdk
Another solution is to flash this https://forum.xda-developers.com/moto-z/development/rom-erfanrom-flashable-zip-t3646962 in TWRP DO FULL WIPE FIRST
Click to expand...
Click to collapse
I flash with u batch, but not working then i flash with twrp not working too i think is a problema of hardware
Broker99 said:
I flash with u batch, but not working then i flash with twrp not working too i think is a problema of hardware
Click to expand...
Click to collapse
I see that you are posting on the other thread. What is the truth?
You need to flash the modem file twice. For some reason it doesn't always flash properly the first time and you need to flash it again. I do recall somewhere somebody mentioning not to use batch scripts to flash as you can miss some flashing issues occasionally. As stated previously, once you are on the 7.x bootloader, there is no way to roll back unfortunately. Try reloading the full firmware through fastboot and make sure you flash the modem twice. I recently had a similar issue on a Moto X Style and I had to flash the modem twice to fix WiFi issues.
Hope this helps.
Ooms
Captured the OTA today, just a security update.
download link: https://g2slave-us-east-01.tclcom.com/b173797e241a69aa94a93d7213e38be5a0db9f0a/98/609598
Code:
ota-property-files=metadata:69:415
ota-required-cache=135884800
ota-type=BLOCK
post-build=T-Mobile/T790W/Seattle_5G:10/QKQ1.200913.002/v6B92-0:user/release-keys
post-build-incremental=v6B92-0
post-sdk-level=29
post-security-patch-level=2021-02-05
post-timestamp=1612250283
pre-build=T-Mobile/T790W/Seattle_5G:10/QKQ1.200913.002/v6B8U-0:user/release-keys
pre-build-incremental=v6B8U-0
pre-device=Seattle_5G
Well i installed magisk just to root the recovery.img that was included in your zip file .. now the question is how to flash it. Im on the verzion varient t790s
ᐯerified Developer said:
Well i installed magisk just to root the recovery.img that was included in your zip file .. now the question is how to flash it. Im on the verzion varient t790s
Click to expand...
Click to collapse
Without the bootloader unlock, I dont think there is a way. Each day looks like less and less of this phone getting custom support. Going to use it for couple years and bounce to a new phone.
Well i can get the phone into EDL mode or download mode. And fastbootd just domt kno what commands and domt have a firehose but apparently you can flash without firehose im edl not sure how tho
ᐯerified Developer said:
Well i can get the phone into EDL mode or download mode. And fastbootd just domt kno what commands and domt have a firehose but apparently you can flash without firehose im edl not sure how tho
Click to expand...
Click to collapse
This might be helpful to you. https://github.com/openpst/sahara
Received android 11 OTA today for the T-Mobile Revvl 5G variant:
Code:
ota-property-files=metadata:69:296
ota-required-cache=0
ota-type=BLOCK
post-build=T-Mobile/T790W/Seattle_5G:11/RKQ1.210209.002/v7D5H-0:user/release-keys
post-build-incremental=v7D5H-0
post-sdk-level=30
post-security-patch-level=2021-05-05
post-timestamp=1622059932
pre-device=Seattle_5G
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm trying to root my T790W T-Mobile revvl 5g. I uploaded this photo thought maybe it might help
jonjon707 said:
I'm trying to root my T790W T-Mobile revvl 5g. I uploaded this photo thought maybe it might help
Click to expand...
Click to collapse
The option does not do anything toward unlocking the bootloader unfortunately.
trying to root with magisk always get the "something went wrong. app not installed" message try about 10 different methods of fixing this error only thing that work was a complete data wipe and factory reset it installed but as soon as i open it it closes immediately. is it possible to do this even? been racking my mind with this for a week now. please help
Zmuurda said:
trying to root with magisk always get the "something went wrong. app not installed" message try about 10 different methods of fixing this error only thing that work was a complete data wipe and factory reset it installed but as soon as i open it it closes immediately. is it possible to do this even? been racking my mind with this for a week now. please help
Click to expand...
Click to collapse
also if you know of another way i'm open to that as well
Has anyone had any luck rooting this phone yet?
Stuck on android 10? I have the T790w (revvl 5g)
I go to settings and update software buut it keeps showing I am up to date?
Do I need an active t-mob Sim to update? Or is there a way to manually update os.
Is there a android11/12 firmware I can download and update via recovery?
Thanks
Yes...you can do it...
What is needed?:
1.Device with twrp or any other installed.
What is working?:
1.Root access work.
2.Brightness slider work.
3.Auto Brightness work.
4.Gapps include.
5.Migrate work.
What is not working?:
1.Fingerprint lock is missing from setting.
2.your stroge is force encrypted...twrp cn cannot decrypted data...use pen drive or memory card to flash thing from twrp..
How to flash?:
1.Backup your data because You need to format data.
2.Download extract and rename it as system.img(from below link)
Generic System Image releases | Platform | Android Developers
developer.android.com
2.Download Gsi flasher.zip and system_resize.zip(From my post)
3.Keep system.img and Gsi flasher.zip and system_resize.zip in same location.
4.Boot into Twrp and Flash System_resize.zip.
5 Reboot into recovery and flash Gsi_flasher.zip.
6.Download vendor from below link and install it via Twrp.
a11-vendor-lancelot.zip
drive.google.com
7.Flash Magshik v23.zip for magshik support
8.Formats data.
9.Boot your device.
10.Flash auto brightness gsi.zip(from my post) through magisk to autu brightness support
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gonna flash it, hoping it goes well.
didn't like it that much as i had higher expectations
Applepear said:
gonna flash it, hoping it goes well.
didn't like it that much as i had higher expectations
Click to expand...
Click to collapse
It is only testing... don't take it as daily driver
New method is update...
Shas45558 said:
New method is update...
Click to expand...
Click to collapse
You can install it via recovery
Beta 2 is release....try new android 12
Shas45558 said:
Beta 2 is release....try new android 12
Click to expand...
Click to collapse
Will install, i think material you and wallpaper based theming is integrated in it, correct me if im wrong
Applepear said:
Will install, i think material you and wallpaper based theming is integrated in it, correct me if im wrong
Click to expand...
Click to collapse
Yes you are r8
Screenshot is added
can't flash vendor(( getting error1
Shas45558 said:
kerim9551 said:
can't flash vendor(( getting error1
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Look it works this work only with redmi 9(Lancelot and galahed)...
If your device is Lancelot or galahed and you get the error then plz send me screen shoot
Shas45558 said:
Look it works this work only with redmi 9(Lancelot and galahed)...
If your device is Lancelot or galahed and you get the error then plz send me screen shoot
Click to expand...
Click to collapse
I'm using lancelot. problem was that I was on modified chinese miui, first i flashed ancient rom, after that I was able to flash this GSI. Is there any way to flash gapps on this gsi, because i want to use it as daily driver? thanks in advance
kerim9551 said:
I'm using lancelot. problem was that I was on modified chinese miui, first i flashed ancient rom, after that I was able to flash this GSI. Is there any way to flash gapps on this gsi, because i want to use it as daily driver? thanks in advance
Click to expand...
Click to collapse
Downloaded the gsi with gapps including..
Their are two options... downloaded gsi what gms ...(first one)
Shas45558 said:
Downloaded the gsi with gapps including..
Their are two options... downloaded gsi what gms ...(first one)
Click to expand...
Click to collapse
thanks a lot
Can anyone help me????? my phone is bricked and i have to flash with firmware........... I tried all process in the google but i could flash the phone....
sadatkabir50 said:
Can anyone help me????? my phone is bricked and i have to flash with firmware........... I tried all process in the google but i could flash the phone....
Click to expand...
Click to collapse
I just seen on oxygen updater app on google play has that stock firmware. if I'm not mistaken... just doubled checked no usa version tho
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sadatkabir50 said:
Can anyone help me????? my phone is bricked and i have to flash with firmware........... I tried all process in the google but i could flash the phone....
Click to expand...
Click to collapse
maybe i can download that firmware for you an foward a download link.
but def looks like.... we can get something going for you!!! NO PROMISES THO HAHA
halloweenm925 said:
maybe i can download that firmware for you an foward a download link.
but def looks like.... we can get something going for you!!! NO PROMISES THO HAHA
Click to expand...
Click to collapse
bro...my device is running but i got no internet wifi,sim data isnot working.....how to flash this if u send me this....
can u give the boot.img file or full rom ?
I'm having the very same problem right now. I tried to root the device and everything worked well so far, but neither Wifi nor Bluetooth is getting activated. Changing to the other boot slot ended up in a boot loop back to fastboot.
@sadatkabir50 Where did you get the stock rom from or what was your approach to root the device?
hamamama said:
I'm having the very same problem right now. I tried to root the device and everything worked well so far, but neither Wifi nor Bluetooth is getting activated. Changing to the other boot slot ended up in a boot loop back to fastboot.
@sadatkabir50 Where did you get the stock rom from or what was your approach to root the device?
Click to expand...
Click to collapse
Same problem. Everything working fine just Wi-Fi,camera,Bluetooth not working.
Which method did you use to root your device?
I'm following @halloweenm925's advice and downloaded the firmware for the EU version of the CPH2465 with a second device. How would you move forward if you had this file?
this boot img can boot ur phone but wifi and everything not working..
So I got the stock rom but neither the Wifi nor the Bluetooth is coming up. I'm kind of desperate right now. Can anybody support?
hamamama said:
So I got the stock rom but neither the Wifi nor the Bluetooth is coming up. I'm kind of desperate right now. Can anybody support?
Click to expand...
Click to collapse
inbox me bro.. just now i fixed the problem
Solved the problem. Here is how I did it.
1) On a second Android phone, download the Oxygen Updater App
2) Open the app, set it to advanced settings, chose the device with the semi-bricked status, download the full zip
3) the zip file will be downloaded to sdcard's user root => transfer the zip file to your semi-bricked device
4) on your semi-bricked device, go to settings>updates, click on the top right three-point-menue and chose "local installation"
5) select the zip file and do the update
After the unpacking and verification is finished, reboot the phone and things should be back to normal.
If you want, you can now give the rooting a second try. There are a lot of tutorials, I used this one since I had the stock full rom:
Root OnePlus Nord CE 5G using Magisk [No TWRP Required]
Do you own a OnePlus Nord CE 5G android smartphone? If yes, today, we will share with you how you can Root OnePlus Nord CE 5G with the help of the Magisk
magiskapp.com
The full stock rom which is downloaded as described above needs to be extracted with the help of a script: as described here:
[LINUX][GUIDE] ROM Payload Image Dump
Now we have dumpers for Win/Mac/Linux! Great!
forum.xda-developers.com
So the steps to root the device would be
1) download the full rom as described above
2) extract the boot.img with the help of aforementioned python script
3) follow the steps as described in the tutorial linked above
I think what caused the initial issue on my side was that I simply was not on the same OS version on the device as the boot.img which I extracted from the full zip which is totally my own fault because almost every tutorial mentions it explicitly that you have to have the latest update on your to-be-rooted device AND make sure that you have the same ROM available to root your device.
Questions welcome!