Related
Development suspended until (if) CM10 gets to a faster and stable state. If you want a fast, fully working new MIUI experience, check out my other ROM.
Here is an alpha release of MIUI4.1 based on CM10 for the Xperia Play. It is built upon CM10-FXP137 and MIUI Jellybean for the Nexus S.
I am using this ROM as a daily driver now and it seems to be very stable. But since CM10 is still alpha, there may be some bugs still. Future updates may also require a factory reset, so be aware of that.
A CDMA version will come soon, as soon as CM10 is confirmed working on R800x I will work on it for MIUI.
Make sure you read the blue section "Special Notes/Partially working" below before using! It contains very important existing issues and work-arounds.
Working (tested):
Calls / Text / 3G / Data
Audio
Wifi
Camera
ALS / Auto-brightness
Web Browser (from MIUI 2.8.24)
Google Play Store (fully)
Google Now (no Voice Search)
Music/Gallery/Screenshot feature (Menu+VolDown)
Location/Maps/Compass
Gamepad
Touchpads (On most games, thanks to farenheith)
If you find a game that still doesn't have working touchpads, report it in farenheith's thread. Known games reported still not working:
- Dead Space
Not working:
Torch (unknown issue)
Wifi Tether (CM10 issue)
?
Partially working/special notes:
After call is ended, audio is not routed back to loudspeaker. Sounds will be very quiet! You need to either replug headphones or reboot the phone to fix it... sadly this is a CM10 issue and I can't fix it.
In Notification Panel, the Clear/Options button in top-right corner goes off the screen. Change font-size to "Small" (in Settings > Display) to fix this for now.
Google Play Store might not show installed apps or purchased apps after signing in for the first time. Simply 'Clear Data' for Google Play Store to fix it.
When screen is off, VolUp does nothing and holding either Vol button will only skip music tracks forward
?
Download/Instructions:
Turbo MIUI v0.52.20914
(1) Download the CM10 FXP-Turbo2 kernel. You can use any other CM10 kernel if you wish.
(2) Execute following commands on PC's shell/command prompt to install kernel and prepare:
Code:
fastboot flash boot boot.img
fastboot erase system
fastboot erase userdata
(3) Copy the update ZIP to SDCard. To enter Recovery on this kernel, press Back when you feel the vibration trigger on first logo.
(4) Install the ZIP update as normal.
Screenshots:
Changelog:
Code:
v0.52.20914
-----------
- Revert: CM10-FXP137
- New: FULL TOUCHPAD SUPPORT. Thanks to farenheith!
- Fix: Camera
- Fix: SIM PIN prompt on startup (thanks to Lens_Flare). Phone is not multilingual for the moment due to APKTool bug.
- Fix: Disable Setup Wizard using old Provision, temporary until bugs sorted out in patching
- Fix: Browser user-agent
- Fix: Official Facebook app, maybe other web apps
- Fix: Magnify-glass zoom widget when selecting text (love this feature, glad I fixed it)
- Tweak: Disable services from writing adj and minfree values, allowing init.d tweaks to actually work.
v0.51.20914
-----------
- Update: CM10-FXP138
- Update: MIUI v2.9.14
- Update: Using latest MIUI browser from now on (with latest FXP webkit backend). Please report any browser crashes, video sites need testing.
- New: Multilanguage support
- New: Google Now voice search (untested)
- New: Google Now offline support (untested)
- New: Face Unlock (untested)
- Aroma: Fix "Default" install mode
- Aroma: Elite install - disable CPU rendering (set back to CPU+GPU for default). This can be switched after install by using the "Customize" option
- Aroma: Elite install - disable Setup Wizard to bypass need for Xiaomi account by using old Provision APK. May have unknown side-effects.
v0.41.20907
-----------
- Update: CM10-FXP137
- Update: MIUI v2.9.7
- Tweak: DalvikOpt flags
- Tweak: Remove entire software-rendering pathway, forcing GPU always (thanks to ShyamSasi)
- Fix: Camera
- Aroma: Added AD2SDX alpha 2 by amarullz as an sd-ext alternative, with my own CM10 fix
v0.3.20831
----------
- Update: CM10-FXP136
- Update: MIUI v2.8.31
- Fixed: No need to disable HW overlay for video anymore (Thanks to FXP)
- Removed: Bundled Live Wallpapers (except picker app)
- MIUI base switched to crespo (Nexus S)
- Using MIUI Browser v2.8.24 from now on (no new night mode, no future updates on browser)
v0.3.20817
----------
- Fixed: Play Store FC, possibly other problems due to APKTool bugs (using precompiled Framework resources, "disable signature checking" reverted)
- Update: ES File Explorer, Link2SD, Play Store and Titanium Backup
v0.2.20817
----------
- Update: CM10-FXP135
- Update: MIUI v2.8.24
- Fixed: Link2SD (permissions 777 on symlinks to fix from being stale which causes a link-break on every reboot)
- Hack: Disabled system package signature verification (required for future fixes)
- Tweak: Optimized Lowmemorykiller and VM sysctl values for better memory management and performance (for <512MB devices like ours)
- Tweak: Most system packages recompressed and zipaligned. Slightly longer boot time but saves a few precious MB on /system.
- Tweak: Disable automatic brightness
- Tweak: Moved system apps to data (default enabled in Aroma installer): Google Talk; MIUI Compass, Gallery and Music
- New: AppWidgetPicker
- New: DSP Manager (from CM10)
- New: Volume+ (skip music) mod. Sort of. While screen is off and music playing, VolUp does nothing and both keys skip forward.
- New: zRAM enabled at 10% (this is good with new snappy compression in kernel)
- New: Purgable assets enabled
- New: Kernel samepage-merging enabled
- New: Strict-mode checking disabled
- Note to self: We use libwebcore from FXP134 and WebKit core framework from MIUI v2.8.17 from now on
v0.1.20817
----------
- Initial version
- Based on official CM10-FXP134 for Zeus and MIUI UK's 2.8.17 for the Galaxy Nexus
Does this have CDMA support yet? And I assume you'd like a logcat.
game_guy said:
Does this have CDMA support yet? And I assume you'd like a logcat.
Click to expand...
Click to collapse
No, and no. Read the OP. It takes me a long time to upload.
I will release a CDMA test version soon. This will take a while because I have to upload two separate versions and I don't know if CM10 for zeusc even works yet.
Click to expand...
Click to collapse
Ah. My bad, didn't notice that sorry. >.<
It does on pax's 7/29 build. You could use that as a base for the cdma variant as that has *almost everything working.
game_guy said:
Ah. My bad, didn't notice that sorry. >.<
Click to expand...
Click to collapse
It's fine, just be patient.
cj360 said:
It does on pax's 7/29 build. You could use that as a base for the cdma variant as that has *almost everything working.
Click to expand...
Click to collapse
Link please? Is it CM10?
Upload finished.
****yeah
i'm go testing now
and will be translate russian later
this is port of that
wmaster4g said:
****yeah
i'm go testing now
and will be translate russian later
this is port of that
Click to expand...
Click to collapse
No, this is my own work. If I got it from that guy I would have given credit to him.
EDIT: He probably used my own research. Unlike most XDA "developers", I like to share what I know with the community. Or maybe he is actually one of the few skilled hackers on here and also did it himself like me.
gonna try it later after work and will report the bugs
thanks for bringing up another JB Rom pal
CosmicDan said:
It's fine, just be patient.
Link please? Is it CM10?
Upload finished.
Click to expand...
Click to collapse
Here it is and yes it's cm10.
Good work!! Goinf to have it downloaded in a few hours.. Gotta sleep first.. One question.. Does the sd card mount properly?
Sent from my Xperia Play using xda premium
cj360 said:
Here it is and yes it's cm10.
Click to expand...
Click to collapse
Alright thanks, I'll try and build a CDMA test version. But since this isn't FXP I won't be able to keep it as up-to-date.
Fat_boy555 said:
Good work!! Goinf to have it downloaded in a few hours.. Gotta sleep first.. One question.. Does the sd card mount properly?
Click to expand...
Click to collapse
Sure, why wouldn't it? Unless you mean the CM10 bug where it says "Unable to install to internal USB or memory card" when you try to install paid apps from the Play Store, no. That is a CM10 bug. But restoring everything from TB works fine, and installing free apps/updates from Play Store works fine.
CosmicDan said:
Alright thanks, I'll try and build a CDMA test version. But since this isn't FXP I won't be able to keep it as up-to-date.
Click to expand...
Click to collapse
Awesome, I know pax will update once he's able to and eventually fxp will figure out data as well.
Going kinda off-topic with this so let me know if you'd rather not discuss it here but, do you build your kernel with ics sources modified for JB or from fxp's jb sources?
cj360 said:
Awesome, I know pax will update once he's able to and eventually fxp will figure out data as well.
Going kinda off-topic with this so let me know if you'd rather not discuss it here but, do you build your kernel with ics sources modified for JB or from fxp's jb sources?
Click to expand...
Click to collapse
The kernel I'm building from is branched off JBX repo (on the 'jellybean-turbo' branch), however I did a full tree comparison and the FXP CM10 jellybean kernel is identical to the JBX one - apart from the zRAM update from FXP (Google snappy compression) which I have already merged in CM9 turbo kernel. The RAMDisk is based on FXP RAMDisk.
Computer's built, installing Ubuntu 12.04 soon so i'll be back in the game.
Cosmicdan, what does SEMCRIL look like in Framework?
Pax
paxChristos said:
Computer's built, installing Ubuntu 12.04 soon so i'll be back in the game.
Cosmicdan, what does SEMCRIL look like in Framework?
Pax
Click to expand...
Click to collapse
The full SemcRIL code for this ROM is taken directly from CM10, along with BaseCommands and PhoneFactory. It was actually a requirement to get it booting. Using my existing scripts but replacing the CM10 base for CDMA version, and the MIUI base for the CDMA Galaxy Nexus version, it should hopefully be enough....
...I would upload my "kitchen" so people can try to build it and bugtest, but how many of you guys with CDMA zeus's are good with smali? Also it requires Windows Vista/7.
paxChristos said:
Computer's built, installing Ubuntu 12.04 soon so i'll be back in the game.
Cosmicdan, what does SEMCRIL look like in Framework?
Pax
Click to expand...
Click to collapse
Good to hear! Are there any working CDMA builds floating around, or should we wait for builds from you?
Leraeniesh said:
Good to hear! Are there any working CDMA builds floating around, or should we wait for builds from you?
Click to expand...
Click to collapse
Of what? MIUI or CM10? Check the JBX thread for CM10 working CDMA. Wait, cj posted the link a few posts back to a CM10 for zeusc with working data.
Sorry to hijack cosmic,
My guess as to why CM10 data stopped working for CDMA is because of a commit done a while back (August 5th)
Now that I have a working PC i'm gonna try to undo that & see if that's the issue & if it is, I need to coordinate with FXP to create a ril for cdma & edit some common files
Pax
paxChristos said:
Sorry to hijack cosmic,
My guess as to why CM10 data stopped working for CDMA is because of a commit done a while back (August 5th)
Now that I have a working PC i'm gonna try to undo that & see if that's the issue & if it is, I need to coordinate with FXP to create a ril for cdma & edit some common files
Pax
Click to expand...
Click to collapse
That's fine, it's is still relevant since it's based on CM10. So is that build linked a while back working with CDMA fully or not? I will probably not update the GSM ROM of this until next FXP release anyway so.... yeah.
It would be good if FXP CM10 had CDMA working, because then I could easily create a patch for this GSM ROM. I really don't want to have to upload two full ROM's every time.
Code:
[COLOR="DarkOrchid"]#include[/COLOR] [COLOR="Magenta"][/COLOR]
[COLOR="Blue"]/*
* Your warranty is now void.. LOL I guess you knew it already.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because your phone
* bootloops and alarm does not go off. Please do some research if you have any
* concerns about features included in my ROM before using it! YOU and only
* YOU are choosing to make these modifications.
*/
[COLOR="Magenta"]#if[/COLOR]
You have a [COLOR="DarkGreen"]question[/COLOR] post it in the [COLOR="DarkRed"]thread[/COLOR],
Instead of [COLOR="DarkGreen"]Pm'ing me[/COLOR], as other users may
experience you [COLOR="DarkRed"]problems[/COLOR]
[COLOR="Magenta"]#endif[/COLOR][/COLOR]
I thought I would try to build a rom from source and I wanted to try one that might be faster or at least really small. Rom itself only takes up 24mb on internal storage! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Working:
Both CDMA and GSM Networks are working (tell me if GSM isn't)
Rotation
Camera! Thx to wedgess!
Bluetooth (should be I don't have devices to test with)
Wifi
Root
USB Mass Storage or MTP if your using wedgess' or cosmicdans' kernel
GPS
TouchScreen
Advanced Slim Settings (A.S.S)
Video playback is just as buggy as other JB roms.i
Multiboot (also specific to cosmicdans' or wedgess' kernel
Not working yet:
[*] Camcorder is still broken on the latest build but Camera is working 100%
Camera and Camcorder work on wedgess' & cosmicdans' kernels
OTA causes Settings to force close. So DON'T TOUCH IT! I should remove it but I'm lazy
Something I missed? Don't be shy tell me in the thread!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Install:
You must have an [BIG]UNLOCKED BOOTLOADER[/BIG] if you were wondering
Perform the usual nandroid backup of your working set-up.
Use LuPus V3 or Turbo JB Kernel
Wipe data
Wipe cache
Wipe Dalvik cache
Format System ( found in mounts & storage in CWM )
Flash ROM from the DOWNLOADS section in the 2nd post
Huge thanks to CM, FXP, KXP, SlimBean's github, Slimrom's homepage whose work and sources made this possible.
paxChristos for his cdma fix on jellybean
Multiple developers on the Xperia play forums
And if anyone is interested in what I changed from CyanogenMod's device trees to make this compile, then here's my github:
https://github.com/cj360
~~ 02--03--13 ~~
Changelog:
* latest version of slimbean
* camera and gallery2 are combined like they should be so there's only one camera icon and it works like it should
Downloads:
GSM via Mediafire: http://www.mediafire.com/download.php?4jsvlxev19d094i
CDMA via Mediafire: http://www.mediafire.com/download.php?744ybcs5mn26abr
~~ 12--16--12 ~~
Changelog:
* latest version of slimbean
* updated touchpad fix, should* work with more games no guarantees
* camera & camcorder are working via legacy camera app
Downloads:
GSM via Mediafire: http://www.mediafire.com/?cp56pzoca3m0cn1
CDMA via Mediafire: http://www.mediafire.com/?6tesq78n5zxbnqp
~~ 11--16--12 ~~
Changelog:
* updated to slimbean 3.0 new features from slimroms.net including new lockscreens and more
* fixed camera preview and taking pictures work like they should
* panorama & camcorder are still broken w.i.p.
Downloads:
GSM via Mediafire: http://www.mediafire.com/?5bu25y8ytixc01d
CDMA via Mediafire: http://www.mediafire.com/?f28cpjt79fdlos7
Older downloads are still there simply go to my SlimBean folder on Mediafire
~~ 11--10--12 ~~
Changelog:
Fixed Mirror Issue in certain apps and the frame lock issue
no more need for lagfix.zip!
~~ 11-6-12 ~~
first build
bug I forgot to mention: slight mirror effect in multiple apps ie if you watch a flash based video in the gallery app and there's black borders cause the video doesn't fit the screen exactly, the video will be mirrored in these borders.
~~~ Addons ~~~
Use this gapps (I see slim gapps is starting to have issues)
Gapps
Some flashable mods, thanks to Leraeniesh for the tip
http://forum.xda-developers.com/showpost.php?p=32177449&postcount=3
This is awesome man! So tiny! Would be awesome to build MIUI5 on this little baby! Any plans for a GSM version eventually? I'm sure a GSM version would build fine, if not then we could just try using the ril-related libs from CM10
Great! Congrats on this ROM, hope to see some GSM for later releases! good to see more love coming to our beloved XPlays!
I can try porting GSM version...
Wouldn't it be better to help cj's source builds? Splitting/kanging the project is not the best idea.
Sent from Xperia Play (R800a) with Tapatalk
Very nice! I'm definitely going to try this out. 24MB is freaking tiny for a ROM. :3 I'll get back to you on results.
sechko said:
I can try porting GSM version...
Click to expand...
Click to collapse
CosmicDan said:
Wouldn't it be better to help cj's source builds? Splitting/kanging the project is not the best idea.
Sent from Xperia Play (R800a) with Tapatalk
Click to expand...
Click to collapse
If want to sure, but like Dan said it might be easier for me since I just need to change from Zeusc to Zeus. Let me know if you really want to otherwise I'll probably be putting up a version for gsm users.
Sent from my Xperia Play
Next build has the mirror issue fixed and it does not need the lagfix zip. I'm still working on the kernel, just cause recovery is still broken on it.
Good luck with the kernel thing, I got no idea lol...
Maybe a GSM port wouldn't be so bad. Since I would like to make an MIUI5 based on this, if we can just replace libs and/or hack the framework smali to use GSM, that would make MIUI5 easier to support both CDMA and GSM.
Or even if, when you get around to it - build one GSM version and if I find the differences in framework and libs myself then you wouldn't have to worry about building twice every time. For once it'll be a ROM which is CDMA built and needs a GSM Patch instead of the other way around
I use cm10 sources for the kernel maybe that will have a better outcome.
Sent from my Xperia Play
It looks like sechko made a thread for this port already for gsm
Sent from my R800x using xda app-developers app
Noticed after I posted, hoping to include wedges' camera fix as well if I can figure out recovery. Probably work on it this weekend.
Sounds good I'm actually waiting for the next release before I decide to download and try it out. I was waiting for milestone 1 for aokp.. I haven't tried pacman.. I plan on using this one
Sent from my R800x using xda app-developers app
Heya bro I finally got a chance to try this out, awesome sauce really. I built my own kernel based on KRsH (same as the MIUI Oz ROM) and manually updated genlock/fb code for Jellybean, super fast! But I had a few issues with the ROM, kept failing on buffer locks and falling back to software rendering (whenever you scroll). Here's the log:
Code:
?: E/libgenlock(462): perform_lock_unlock_operation: GENLOCK_IOC_DREADLOCK failed (lockType0x1,err=Connection timed out fd=51)
?: W/Adreno200-EGLSUB(462): <GetBackBuffer:2121>: genlock_lock_buffer GENLOCK_WRITE_LOCK failed
?: W/Adreno200-ES20(462): <gl2_surface_swap:43>: GL_OUT_OF_MEMORY
?: W/Adreno200-EGL(462): <qeglDrvAPI_eglSwapBuffers:3477>: EGL_BAD_ALLOC
?: W/HardwareRenderer(462): EGL error: EGL_BAD_ALLOC
?: W/HardwareRenderer(462): Mountain View, we've had a problem here. Switching back to software rendering.
And I solved it by using all these files from latest CM10 ROM:
Code:
lib\libgenlock.so
lib\libGLESv1_CM.so
lib\libGLESv2.so
lib\libGLES_trace.so
lib\egl\egl.cfg
lib\egl\eglsubAndroid.so
lib\egl\libEGL_adreno200.so
lib\egl\libGLESv1_CM_adreno200.so
lib\egl\libGLESv2S3D_adreno200.so
lib\egl\libGLESv2_adreno200.so
lib\egl\libGLES_android.so
lib\egl\libq3dtools_adreno200.so
lib\hw\audio.a2dp.default.so
lib\hw\audio.primary.default.so
lib\hw\audio.primary.msm7x30.so
lib\hw\audio_policy.default.so
lib\hw\audio_policy.msm7x30.so
lib\hw\camera.semc.so
lib\hw\copybit.msm7x30.so
lib\hw\gps.goldfish.so
lib\hw\gps.semc.so
lib\hw\gralloc.default.so
lib\hw\gralloc.msm7x30.so
lib\hw\hwcomposer.msm7x30.so
lib\hw\keystore.default.so
lib\hw\lights.semc.so
lib\hw\local_time.default.so
lib\hw\power.default.so
lib\hw\sensors.default.so
lib\hw\sensors.goldfish.so
And now it's ultra-smooth and fast. I did not flash the lagfix by the way.
Anyway, if you want to look at my kernel i just pushed the last changes to my GitHub - under KRsH repo, jellybean branch. Remember that this is NOT a CM10 kernel! It is based on my KRsH-based stock ICS kernel with Jellybean updates it also has a ramdisk in there too with my own minor mods. Another thing to note is that it has 280MB on system and 8MB on cache and the ramdisk will symlink /cache/dalvik-cache to /data/dalvik-cache. So a full format/FTF flash will be required if you don't remove the mtdparts from kernel commandline.
Cheers! Now to start working on MIUI5....
Sounds awesome! I have a break between my classes maybe i can futx with it.
Sent from my Xperia Play
that's weird that you had the issue with the failing buffer locks. the first build has that issue which is why I added the lagfix, but I build with cm's hardware and I couldn't get what was causing it.
Here's the next beta build. It doesn't need the lagfix from aokp any more and I'm pretty sure the frame buffer issue was something from slimbean and I believe they fixed it.
http://www.mediafire.com/?8ojp4loittohamu
I'll be editing the 2nd post so it has the downloads and maybe clean up the OP Friday or Saturday.
Nice work !
cj360 said:
Sounds awesome! I have a break between my classes maybe i can futx with it.
Sent from my Xperia Play
that's weird that you had the issue with the failing buffer locks. the first build has that issue which is why I added the lagfix, but I build with cm's hardware and I couldn't get what was causing it.
Here's the next beta build. It doesn't need the lagfix from aokp any more and I'm pretty sure the frame buffer issue was something from slimbean and I believe they fixed it.
http://www.mediafire.com/?8ojp4loittohamu
I'll be editing the 2nd post so it has the downloads and maybe clean up the OP Friday or Saturday.
Click to expand...
Click to collapse
Does this include the lines that cosmicdan posted few posts up?
Sent from my R800x using xda app-developers app
I'm trying to build a kernel from his sources if that's what you mean. Between cm10's hardware and slimbean'srecent update those errors should be gone. Also for whatever reason slimbean likes the older GB music player, I don't so apollo, Trebuchet, and cm10's new file manager will be included in the next build.
Hey cj do you think you can add the Xperia s or another keyboard instead of the crappy small default jb/ics one?
Sent from my R800x using xda app-developers app
well to get straight to the point here's a quick patch for those that are having issues with the circle button acting as back button. This patch is also known as the ALT Modifier fix. Also added, the R button should be to take a picture ONLY when in camera mode! it will NOT call the camera app.
I think this patch may be already out their I think for ICS this one is for GB. I have only tested this on Stock based & turbo miui GE ROMS but i think it should work on CM based as well (if someone can confirm that will be nice) download the flashable ZIP file in the attachments. I also maid my installer look a little better
great work.:good:
xdarkmario said:
well to get straight to the point here's a quick patch for those that are having issues with the circle button acting as back button. This patch is also known as the ALT Modifier fix. Also added, the R button should be to take a picture ONLY when in camera mode! it will NOT call the camera app.
I think this patch may be already out their I think for ICS this one is for GB. I have only tested this on Stock based & turbo miui GE ROMS but i think it should work on CM based as well (if someone can confirm that will be nice) download the flashable ZIP file in the attachments. I also maid my installer look a little better
Click to expand...
Click to collapse
Greetings, It has been a long time since this publication, but, this fix might work on a r800i that does not have GB installed. Thanks.
emjapeve said:
Greetings, It has been a long time since this publication, but, this fix might work on a r800i that does not have GB installed. Thanks.
Click to expand...
Click to collapse
it might work on ics+ but im not entirely sure, that would depend on how much code has been changed and also i dont think this zip is KK flashable. I also dont have a play anymore to test it, unfortunately all i can say is make sure to do ful backup and try flashing it.
Hi friends,
I injected Genisys UX5.0 theme apps into H818P Marshmallow 6.0 V20e-ESA-XX.
There is no root because of the security measure (seLinux) enabled on android 6.0. Please read this. Only way to disable this feature is to unlock the bootloader.
Announcement:
As I have moved to another device the mod will no longer be updated. I have uploaded the misc. files for developers who want to continue on my development (see attached images). If you like my work so far please don't forget to click thanks. Thanks for your supports guys.
Download:
Update 14/12/16 [v20h]
Code:
H818p_Genisys_20h.zip (TOT) : [url]https://goo.gl/su5v1S[/url]
H818p_Genisys_20h_540.zip (TOT) : [url]https://goo.gl/Fu2xoy[/url]
KDZ: [url]goo.gl/39CeTW[/url] or [url]http://forum.xda-developers.com/showpost.php?p=69477529&postcount=139[/url]
Update 30/11/16 theme genisys 2.0 [v20e]
Code:
H818p_Genisys_20e.zip (TOT) : [url]https://goo.gl/wibtDt[/url]
KDZ: [url]https://goo.gl/4yCVYU[/url]
Update 10/11/16 base [v20d]
Code:
system (img): [url]https://goo.gl/XtRGok[/url]
KDZ: [url]https://drive.google.com/file/d/0BwEMdAEjpBU7VU1PV09Mci1jcEk/view?e=52770133[/url]
Initial version [v20e]
Code:
System.img (img): [url]https://goo.gl/PVUDV1[/url]
KDZ: [url]https://goo.gl/4yCVYU[/url]
The differences between version, see this post NO 179
Prerequisite:
Install all required LGG4 drivers http://downloads.codefi.re/autoprime/LG/LG_G4/LGUnitedMobile_Win_Driver_Ver_3.14.1.exe
LGUP + DLL patch => https://mega.nz/#!ctcTDQ7A!rE-EHRiyQcK4-SQRGI1b0QpiLn-_ntRL-pz40X4DUco
LG root tools => https://mega.nz/#!gwlTnRaD!TaoDuDzhNM4eTr2efpWbYl7nMPcTUuRrdWSmhC4IqW0
Installation Method 1: TOT
- Open LGUP flash the base KDZ with the 'Refurbish' option
- Then re-flash again using the TOT file with the 'Upgrade' option
- If you want to backup data after the bootloop, flash the TOT first to boot your device up and backup your stuff.
- If you update the new mod on the same base just only flash the TOT file, no need to re-flash the KDZ again
If your device is bootloop, enter download mode before flash it with the LGUP
watch video here => https://www.youtube.com/watch?v=0cbLhpWq5C8
Installation Method 2: IMG (Thai Guide HERE)
For video please refer to original thread for H815 started by @the_naxhoo here:
http://forum.xda-developers.com/g4/orig-development/bl-lock-ul-android-6-0-marshmallow-t3459260
Step-by-step instructions for method 2:
Plugged in the cable to connect the phone to PC.
Click ALLOW on phone to connect to the PC.
Open LGUP and select UPGRADE
Browse for KDZ file
Change from UPGRADE to REFURBISH (this will erase ALL your data please backup first)
Click START and wait until it finishes
Finish the setting up your google account on the phone
Connect USB to the PC again
Copy system.img file into your phone's INTERNAL STORAGE (4.xx GB) using windows explorer and close windows explorer
(Keep the cable connected) Open LGUP and select UPGRADE and click START (Don't choose REFURBISH, it will erase all your data)
Wait until the phone reboot into download mode and the GREEN COMX appears on the phone screen (Meanwhile LGUP should be at 9%) then PULL the cable immediately (if you are late it will start to re-flash your phone. In this case, just let it finish and start again don't pull the cable or your may hard brick your phone).
Close LGUP
Re-plug in the cable
Start Send_Command.exe \\.\COMX where X is appeared on the phone (Same method as rooting the phone)
The # will appear at your command prompt
Type command #PRINT (IT WILL NOT RESPONSE HERE, DONT BE PANIC!)
Stop the program by Cltr+C
Start Send_Command.exe \\.\COMX again
When # appears ,type command #id (if it is successful you should see text starting with "uid=(0)root gid=(0)root" )
Copy and paste this text into the command # dd if=/data/media/0/system.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0 (experimental version change system.img -> system1.img )
Press enter and it will work for few minutes then the command # will appear again
Type command #LEAVE to exit the program
Unplug the cable and pull out the battery from the phone then restart it
Your are done!
Note: updating the new version of system.img, if the based-KDZ is identical, just skip to step 9.
Post install mod:
You can further your battery performance by disabling Fast dormancy and Carrier Aggregation. Please see guide at post #87
http://forum.xda-developers.com/showpost.php?p=69309866&postcount=87
Advanced users:
For the geeks, don't want to wait for the update. Just wanna do it yourself. Please see guide on post #112
http://forum.xda-developers.com/showpost.php?p=69435441&postcount=112
Minor change your ROM with WinHex please read this post => http://forum.xda-developers.com/showpost.php?p=69828891&postcount=242
Change log:
---14/12/16---
v20h based
White background settings
Miniview
Performance & thermal tuned
Home UX 4.0 & UX 5.0
App drawer 5x5 and 5x7 for 540 dpi version
---26/11/16---
Added Bootloop-fix TOT Method
---19/11/16---
Added thermal mod by @ashkan-khatar (Pyrophag)
Minor change in the appearance
---10/11/16---
Patch v20d with the same update 4/11
Added AOSP notification icons
Change quick menu to support 6 toggles
Edit build.prop
---4/11/16---
APK Optimized (Speed and Memory) (Wait few more days to confirm if this helps)
Added Lockscreen with new wallpapers
---28/10/16---
Fixed dual windows supports all apps
---22/10/16---
Based on v20e ESA (security update Apr 2016)
Updated Genisys theme 2.0 update 20/10/16
Setting search enabled
Call record disabled
build.prop performance and battery tweaks (selected from this mod http://forum.xda-developers.com/android/general/guide-build-prop-tweaks-t3376962)
Cpu, GPU, ram, i/o tweaks
Cpu thermal throttling mod
Debloat Google apps
Debloat LG apps (FOTA and LG App update disabled, if you need to use some LG apps please update before flash system.img)
Remove logcat & logd
Remove power on/off sound
---30/9/16---
Build.prop tweaks
---28/9/16---
Removed logcat
Disabled ext4 fs journaling (init.qcom.post_boot.sh) -- dangerous mod,
despite this mod, in case you want to turn off the phone please shutdown normally, don't pull battery!
Enabled split windows all
Added busybox/run-parts
---27/9/16---
Remove logd from v20d base (use the same link to download)
---26/9/16---
No IMS force close for Brazilian
New base v20d with security update 1st Aug 2016
Voice record on the caller screen
---25/9/16---
Remove some more google apps
Remove some LG system app (This may affect some stock features)
Remove logd
Add CTT mod (see. http://forum.xda-developers.com/g4/development/to-bring-ctt-mod-to-g4-t3183858 )
Add CPU, GPU, IO, RAM "Tweaks" (see. http://forum.xda-developers.com/tmo...-msm-8992-cpu-io-ram-interactive-gov-t3351478 )
---Initial version 22/9/16 ----
v20e-ESA-xx update
Add basic functionalities of Genisys theme from here:
http://forum.xda-developers.com/g4/t...-v1-0-t3359019
- Eg, Live Wallpapers, Miniview, and theme mods.
Change dpi to 540
Remove some Google pre-installed apps
Bug:
IMS force close seen by the Brazilian user.
Please report
Best,
Credits:
This is a theme mod, ALL of softwares added into system.img come from Gynisys UX5.0 by @BySezerSimsek
Thanks to members who inspired me @haian36 and @the_naxhoo
Related thread:
http://forum.xda-developers.com/g4/themes-apps/genisys-theme-h818p-v20c-t3373959
Removed link: 2 cores disable script:
https://goo.gl/cUKBZF
Great tnx.
Sent from my LG-H815 using Tapatalk
Could you upload your lge-res.apk and framework.apk.... Am building the same theme For h811
bountyman334 said:
Could you upload your lge-res.apk and framework.apk.... Am building the same theme For h811
Click to expand...
Click to collapse
http://forum.xda-developers.com/g4/themes-apps/theme-genisys-ux-5-0-theme-v1-0-t3359019
the_naxhoo said:
http://forum.xda-developers.com/g4/themes-apps/theme-genisys-ux-5-0-theme-v1-0-t3359019
Click to expand...
Click to collapse
Thanks the_naxhoo. :good:
As I mentioned, all files I got from genisys's thread, please check these out.
- /system/framework/framework-res.apk
-/system/framework/lge-res/lge-res.apk
How about the SOT? battery drain so fast?
good work anyway!
elrosid said:
How about the SOT? battery drain so fast?
good work anyway!
Click to expand...
Click to collapse
The exact SOT from 100 - 0 is not recorded.
I am testing it on the 2nd date. Not much drain so far. It is better than stock v20c I think.
Screen off time is quit well (1-2 % overnight).
(I disabled the fast dormancy)
jskasia said:
The exact SOT from 100 - 0 is not recorded.
I am testing it on the 2nd date. Not much drain so far. It is better than stock v20c I think.
Screen off time is quit well (1-2 % overnight).
(I disabled the fast dormancy)
Click to expand...
Click to collapse
ive tried stock v20e before, it has 2.5hrs SOT max. And yes still better than v20c
How about the heat issue? while over-used your phone with genisys theme..
elrosid said:
ive tried stock v20e before, it has 2.5hrs SOT max. And yes still better than v20c
How about the heat issue? while over-used your phone with genisys theme..
Click to expand...
Click to collapse
Regarding the heat, I had used CTT mod when I was using CamUIX 5.1 alpha mod.
The heat is similar, not notable high temperature.
I am currently testing its heat result, if there is a heat issue I will add CTT mod into this rom too.
However, I don't play games nor using much video recording just surf the internet, youtube, email and messaging. I did not find any heat issue.
jskasia said:
Regarding the heat, I had used CTT mod when I was using CamUIX 5.1 alpha mod.
The heat is similar, not notable high temperature.
I am currently testing its heat result, if there is a heat issue I will add CTT mod into this rom too.
However, I don't play games nor using much video recording just surf the internet, youtube, email and messaging. I did not find any heat issue.
Click to expand...
Click to collapse
Thanks for your work. Could you please provide links for CamUIX 5.1 alpha mod
rshanubh said:
Thanks for your work. Could you please provide links for CamUIX 5.1 alpha mod
Click to expand...
Click to collapse
http://forum.xda-developers.com/g4/general/custom-rom-lg-g4-h818p-h818n-lp-t3384632
the alpha mod is for V4, V3 is already final.
elrosid said:
http://forum.xda-developers.com/g4/general/custom-rom-lg-g4-h818p-h818n-lp-t3384632
the alpha mod is for V4, V3 is already final.
Click to expand...
Click to collapse
Yes just wandering what is 5.1
rshanubh said:
Yes just wandering what is 5.1
Click to expand...
Click to collapse
Sorry mate, I meant based on android 5.1.
nice work , what about bluetooth working or broken?
Ahmed Xperia p said:
nice work , what about bluetooth working or broken?
Click to expand...
Click to collapse
Works just fine
jskasia said:
Sorry mate, I meant based on android 5.1.
Click to expand...
Click to collapse
No Problem. Thanks again
---------- Post added at 05:26 AM ---------- Previous post was at 05:19 AM ----------
rshanubh said:
No Problem. Thanks again
Click to expand...
Click to collapse
Can I flash this on H818N Indian Version?
rshanubh said:
Can I flash this on H818N Indian Version?
Click to expand...
Click to collapse
Sorry, I don't know.
If you are able to install the kdz version v20e of H818P and everything work fine, the mod should work properly. You can find it out yourself.
jskasia said:
Hi friends,
Download:
Update 25/9/16 Battery, Heat and Performance tuning (Experimental version)
System1.img : https://goo.gl/ZxzzSG
System.img: https://goo.gl/bcINzu
KDZ: https://goo.gl/4yCVYU
Click to expand...
Click to collapse
Is it really has a good improvement for the new system.img? I already tried yours mod right now and really enjoyed so far
elrosid said:
Is it really has a good improvement for the new system.img? I already tried yours mod right now and really enjoyed so far
Click to expand...
Click to collapse
Mainly tuned in term of heat and performance (higher bench scores), and battery as well. However, on the non-root system, the battery diagnosis is limited. You may stop at the version you satisfied. If you like to join the development please update it and report the result.
You can feel free to try this version because you don't need to install the whole new firmware. All you need is just copying system1.img into you internal storage and using lgup in UPGRADEmode to start flashing it with Send_Command. Thus all your apps and setting should be fine.
jskasia said:
Mainly tuned in term of heat and performance (higher bench scores), and battery as well. However, on the non-root system, the battery diagnosis is limited. You may stop at the version you satisfied. If you like to join the development please update it and report the result.
You can feel free to try this version because you don't need to install the whole new firmware. All you need is just copying system1.img into you internal storage and using lgup in UPGRADEmode to start flashing it with Send_Command. Thus all your apps and setting should be fine.
Click to expand...
Click to collapse
Yea i do like doing this kinda stuff tho. Waiting the file download to be completed and give you some result in a day or next 2 days
I really appreciate your work. H818P needs more custom modding, so jealous with h815 they had CM custom rom
For my own phone, I have adapted the magisk Mi A2 camera module from this and this thread so it works with our phone, and it works great! It is the best picture quality that I have found, equivalent to google camera 3.2 (but with many other options). HDR works, as well as most functions (all video modes including pausing during video, pictures in torch mode...). I've disabled options that don't work. I've also added the higher quality fixes that are in this thread of the S5 apps section.
Tested on oreo, reported working on nougat & pie. Should work on any AOSP variant/rom as it contains its own libraries.
I am not sure why but it seems not to be working on touchwiz roms.
After installing, you need to manually add the permissions if you have a "cannot connect to camera error". If your camera app has named itself "camera has been disabled"with a banner in the cameras app itself, you need to remove the module, reboot, then reinstall it (thanks @DarkSideOfMyRoom)
Enjoy!
Downloads
(v2.0 : Magisk - beta)
V1.4 : Magisk , TWRP
V1.3 : Magisk , TWRP
Changelog:
V2.0 - 8-May-2019 : see changelog in this post
v1.4 - 13-Mar-2019 : upgrade to MIUI 10 cam, auto hdr, updated libraries (APK from joeyhuab, config file extracted from mi 5 ROM)
v1.3 - 23-Jan-2019 : added G900H
v1.2 - 03-Oct-2018 : panorama function works
v1.1 :
- options should apply to all s5 variants, and not only for klte (update if you don't see the "save to sd card" in options).
- the app should request permissions when opening (otherwise, please add them manually)
v1 : initial release
Working :
photo modes : HDR, tilt-shift (panorama like), straighten picture, front/back cameras, filters, timer, torch mode, flash, panorama, face recognition
all video modes : slow, fast, pause & restart
most options : save to SD card (up to Oreo), disable sounds
Not working :
Not supported on our phone : AI scenes, QR, advanced HDR, beautify, age detection and all other options depending on Camera2API or Xiaomi third party apps
Not supported in pie : save to SD card
Based on work from :
joeyhuab for his own arm64 port
carlosggb for the arm libs
soyimparable for the updated media xml files
Thanks for your work on this great camera mod!
I just flashed it on CrDroid v4.6 (based on LOS15.1) and I'm getting a can't connect to camera error, any advice?
Edit: I found that all the permissions for the app was disabled by default and the app didn't ask for permissions, I allowed all the permissions and it works now. (Maybe just add a note to the OP telling people to allow the permissions)
Thanks for the mod
Hi there,
Just wondering whether you need to have magisk to flash this camera port? As I don't have it.
Thanks.
Paul_Lunardi said:
Hi there,
Just wondering whether you need to have magisk to flash this camera port? As I don't have it.
Thanks.
Click to expand...
Click to collapse
Hi, this module is only for magisk. If you want I can do a flashable zip, just tell me.
Otherwise, you can manually extract the "system" folder from the zip and add its content to your own "/system " folder using a root file manager such as FX explorer. The probability of issue is very low as there is no overwriting of local files, however please do a full backup before just to be on the safe side!
alexbelgium said:
Hi, this module is only for magisk. If you want I can do a flashable zip, just tell me.
Otherwise, you can manually extract the "system" folder from the zip and add its content to your own "/system " folder using a root file manager such as FX explorer. The probability of issue is very low as there is no overwriting of local files, however please do a full backup before just to be on the safe side!
Click to expand...
Click to collapse
If you could do a flashable zip that would be great
Thanks for this man! It's awesome, best camera for s5 imo .
Paul_Lunardi said:
If you could do a flashable zip that would be great
Click to expand...
Click to collapse
+1 on flashable zip. I've been holding off on installing Magisk but I guess I'll try it out. Slow-Mo/High FPS (120) recording are enabled on this ROM, correct?
Will this work for the DreamUX mod or does that mod not need it since it's stock based, i.e it has the stock camera with normal quality ?
Thanks for this! It works great on my kltedv on RR Nougat.
v1.2 : panorama works & TWRP zip
@rcmaehl @Paul_Lunardi
Hi, here is a quick TWRP flashable zip. Please let me know if everything goes right before I add it to the OP. It is quite simple so we shouldn't expect issues : I've removed all the things that are dependent on the A2 graphic processor and doesn't work on our phones. I've added the new panorama mode fix.
According to my phone, safety net in magisk passes even after flashing it.
Deranox said:
Will this work for the DreamUX mod or does that mod not need it since it's stock based, i.e it has the stock camera with normal quality ?
Click to expand...
Click to collapse
From what I read, DreamUX is based on Samsung A7, whether this camera is based on Xiaomi A2.
The camera is pretty much standalone (apk + libs) so it should work in any roms.
iretro said:
Thanks for this man! It's awesome, best camera for s5 imo .
Click to expand...
Click to collapse
Is it better than stock rom camera?
lollazzo said:
Is it better than stock rom camera?
Click to expand...
Click to collapse
Yea
Hi there just letting you know that I've flashed this on my S5 g900i and it's working a treat thank you. So far no issues.
Thank you op it works brilliantly
Stuck in Samsung logo on stock 6.0.1 rom
ElIT3ShOOT3R said:
Stuck in Samsung logo on stock 6.0.1 rom
Click to expand...
Click to collapse
Which file did you flash? magisk or TWRP? I wonder if it is the mediaprofile files that increase picture quality. When I have time, I'll do a version without it
alexbelgium said:
Which file did you flash? magisk or TWRP? I wonder if it is the mediaprofile files that increase picture quality. When I have time, I'll do a version without it
Click to expand...
Click to collapse
Magisk one
ElIT3ShOOT3R said:
Magisk one
Click to expand...
Click to collapse
Here is another version, could you try if it works ?
- included : apk + libraries + panorama fix
- removed : increased picture quality, camera permissions (should anyway be already on your phone)
Also, you can try waiting for as long as a full minute while booting after installing the mod - I've noticed that large magisk modules significantly increase the time spent on the samsung logo
alexbelgium said:
Here is another version, could you try if it works ?
- included : apk + libraries + panorama fix
- removed : increased picture quality, camera permissions (should anyway be already on your phone)
Also, you can try waiting for as long as a full minute while booting after installing the mod - I've noticed that large magisk modules significantly increase the time spent on the samsung logo
Click to expand...
Click to collapse
It boots fine now but the Camera app force closes instantly after launching. I also tried clearing cache and allowing all the permissions.
Does portrait mode works? I want to have it