Related
Hello dear people !! ^^
Since we have in a short time Android 10
We don't have recovery for it.. Sadly enough but..
I found this on a chinese forum and make a guide of it.
I don't own the Xperia 1.. Not yet but next week i have one,
So i hope all you people understand this guide because i
explained it as far i can do it.
----------------------
.. Requirements ..
Unlocked bootloader
Xperia 1 Or 5
Android 10
Knowledge howto flash
----------------------
Important !!: rename your patched boot.img what you did
with magisk to kernel.img in put it in this zip Here
1: Remember to back up all your data
2: Make a clean install of the firmware,
!! don't boot after flashing !!
3: Turn the phone into fastboot mode
and connect and type this command in cmd window:
fastboot flash boot twrp-xperia1.img
Here the fastboot twrp file
4: fastboot this command of vbmeta:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Here the vbmeta file
5: Press and hold the volume down and power at the same time,
release the powerbutton but keep
pressing volume down button till you enter twrp.
6: Copy the 3 zips:
The boot.zip where your own kernel.img is inside
what you did at the beginnig of these steps
twrp-Xperia1-3.3.x.zip: Here
Magisk-v20.1.zip: Here
to the phone storage, and flash in twrp
7: Start it up and done
Note: If you encountered
damaged internal storage, format internal memory in twrp
and all went just fine.
... Credits ...
M-Rom
Res
This doesn't lead to success with an Xperia 5. Once you try to boot into TWRP at step 5, you got a note that the device is corrupt and will shut down in 5 seconds.
Thanks ASap people try this I will install and try it! Know bug? Is this still in very testing version? For the moment I don't want to touch my device.
The clean install is necessary? Any incompatibilities with some magisk modules? Im currently using: smali patcher, taichi, youtube vanced
Why isn't there a Thread in the Xperia 5 Forums? Just found this out of Luck...
Instructions are also bit confusing... Where is the vbmeta.img from? Google? And why do i need a boot.img if we have already a TWRP boot.img? Will the one boot.img not replace the other?
Flashing a new Firmware makes also no sense if you just do "fastboot -w" to erase all Userdata. (If coming from a clean Firmware like i do, or You do right after unlocking Your Device)
Edit: So in a nutshell
-We do boot up the twrp boot.img to be able to flash Zips!?
-We do flash vbmeta to unsecure our booting!?
-We do flash our own boot.img with the Zip that the Device can work right!?
-We do flash the TWRP Zip which edits our Ramdisks to add TWRP
-We do flash Magisk (Optional!?) for only Root? Or also needed Kernel changes!?
Would be nice to also make links to XperiFirm and UnSin to get the boot images...
You could also edit the boot.zip script for "magisk_patched.img" so users don't have to rename it
Just want to support that btw. Thanks for Your work anyways!
---------- Post added at 15:47 ---------- Previous post was at 15:07 ----------
Xperia 5 booted well into TWRP but it freezes everytime i start a flash or wipe. Got the storage to work with fastboot -w after flashing the twrp and vbmeta images. Adb Sideload does also not work. Looking forward to a working version!
TWRP unable to flash zips
Well, the title says it all. I can flash the twrp image, but it freezes when flashing zips or starting sideload. I'm using a J9110. I understand you're not supporting here, but just in case you had some tips. Oh and by the way, hoi vanuit Leiden
EDIT: Found the fix: don't change the language to english before opening twrp, and it will flash just fine!
xperia 5 fix plz
I've installed this, it work but boot in chinese and cant load the usb mtp driver on my pc, I cant move the boot.zip to flash, had it put on sd card, cant find the sd card on this crappy twrp, for me is a no. I'd just stick with patched boot until something better will work.
mtp should work if you follow every instruction and boot twrp in chinese.
Having the same issue as others... it appears as though the internal storage is encrypted, but I have no lock screen enabled in the ROM. No Passwords or Fingerprint either. Tried wiping data from within TWRP froze the system. Performed a wipe from within ROM, and now the ROM shows internal data folders as though they're encrypted. Need a pinch of help here.
This method has problem if 55.1.A.3.149 is flashed. The "Start" screen freeze with no touchscreen function on reboot after the procedures completed.
Is there any update to this?
Hopefully with 3.4 will bring a more stable twrp. It includes changes for devices updated to Android 10
I hope can teach how to get your patched boot.img
It's not too much complex to make it work
download firmware from xperiFirm
unsign the boot.sin to get boot.img for your xperia 1
flash the twrp.img to your boot slot_a/b
boot into twrp
install the boot.img, twrp.zip, magisk.zip
now everything works
benben233 said:
I hope can teach how to get your patched boot.img
Click to expand...
Click to collapse
It's not too hard to get one
Get the origin boot.img from xperiFirm, twrp.zip
boot into any twrp on any device
backup your own boot paritition
install the boot.img, twrp one by one
then backup the boot partition, you get the patched-boot.img
Tenhow.XDA said:
download firmware from xperiFirm
unsign the boot.sin to get boot.img for your xperia 1
flash the twrp.img to your boot slot_a/b
boot into twrp
install the boot.img, twrp.zip, magisk.zip
now everything works
Click to expand...
Click to collapse
On latest android 10 and fw .28 it works ? @Tenhow.XDA
Any sign of Android 11 TWRP for Xperia 1?
MrMmmkay said:
Any sign of Android 11 TWRP for Xperia 1?
Click to expand...
Click to collapse
No
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash modem modem.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot reboot fastboot
fastboot flash abl abl.img
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash featenabler featenabler.img
fastboot flash hyp hyp.img
fastboot flash imagefv imagefv.img
fastboot flash keymaster keymaster.img
fastboot flash logo logo.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash odm odm.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
I was already waiting for it.:laugh:
mauronofrio said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Others Commands to flash a fastboot rom
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
Click to expand...
Click to collapse
I an waiting for TWRP...
cieffe54 said:
I an waiting for TWRP...
Click to expand...
Click to collapse
Check development thread
cieffe54 said:
I an waiting for TWRP...
Click to expand...
Click to collapse
And i am waiting for end of corona pandemic.
Kollachi said:
And i am waiting for end of corona pandemic.
Click to expand...
Click to collapse
But i shared it too...
Hello and thank you for the fastboot roms !
How To Use This!
mauronofrio said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash modem modem.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot reboot fastboot
fastboot flash abl abl.img
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash featenabler featenabler.img
fastboot flash hyp hyp.img
fastboot flash imagefv imagefv.img
fastboot flash keymaster keymaster.img
fastboot flash logo logo.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash odm odm.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
Click to expand...
Click to collapse
Oneplus Nord oxygen os install guide
Get OEM Drivers from https://oneplususbdrivers.com/download-oneplus-usb-driver/
Download Oxygen OS 10.5.4 for your compatible devices from https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
(Boot loader Must be Unlocked)
If still able to boot into any version of Android:
1. Install Oneplus OEM Drivers
2. Open Settings
3. Click About
4. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
5. Enable ADB USB Debugger
6. Unzip the Oxygen OS File
7. Open CMD and run it as Administrator
8. Plug Your Oneplus Nord into your PC
9. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
10. This will make the link before the next line quite long.
11. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot)
If You are Unable to boot into any Operating System:
1. Install Oneplus OEM Drivers
2. Unzip the Oxygen OS File
3. Open CMD and run it as Administrator
4. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
5. This will make the link before the next line quite long.
6. Plug Your Oneplus Nord into your Computer
7. When your phone is powered off, Hold Volume Up, Volume Down and the Power Button until you get the Oneplus Logo with fastboot Beneath.
Once in the Bootloader:
1. Type fastboot devices to confirm that your device has been recognised by your PC.
2. After this Open the Oxygen OS Folder and double click Flash-All.adb and It will open in command Prompt.
3. This will take a long time but wait until the phone has booted up into your phones setup (Do Not touch the Phone or Computer).
4. Setup Your Phone but don’t setup anything as we need to wipe it again, so skip through everything.
5. Once in the primary OS connect to WIFI
6. Go to Settings and Update your phone to the latest version, you will get a message prompting you that the Boot loader is unlocked etc, Ignore this and continue.
7. Click the reboot button when prompted, your Software will update to the latest version of Oxygen OS.
Once Updated:
1. Open Settings
2. Click About
3. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
4. Enable ADB USB Debugger
5. Unzip the Oxygen OS File
6. Open CMD and run it as Administrator
7. Plug Your Oneplus Nord into your PC
8. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
9. This will make the link before the next line quite long.
10. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot).
11. Once in Fastboot type “fastboot OEM lock” then your phone will prompt you if you want to Lock the bootloader.
12. Use the volume button to scroll down and press enter to confirm that you want to lock your bootloader.
13. When locked your phone will reboot and it will wipe your operating system and reboot your device into setup.
14. You can now setup your phone as you wish.
there's not oneplus widget? i can't find it
Jackmitchell62 said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Others Commands to flash a fastboot rom
Oneplus Nord oxygen os install guide
Get OEM Drivers from https://oneplususbdrivers.com/download-oneplus-usb-driver/
Download Oxygen OS 10.5.4 for your compatible devices from https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
(Boot loader Must be Unlocked)
If still able to boot into any version of Android:
1. Install Oneplus OEM Drivers
2. Open Settings
3. Click About
4. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
5. Enable ADB USB Debugger
6. Unzip the Oxygen OS File
7. Open CMD and run it as Administrator
8. Plug Your Oneplus Nord into your PC
9. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
10. This will make the link before the next line quite long.
11. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot)
If You are Unable to boot into any Operating System:
1. Install Oneplus OEM Drivers
2. Unzip the Oxygen OS File
3. Open CMD and run it as Administrator
4. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
5. This will make the link before the next line quite long.
6. Plug Your Oneplus Nord into your Computer
7. When your phone is powered off, Hold Volume Up, Volume Down and the Power Button until you get the Oneplus Logo with fastboot Beneath.
Once in the Bootloader:
1. Type fastboot devices to confirm that your device has been recognised by your PC.
2. After this Open the Oxygen OS Folder and double click Flash-All.adb and It will open in command Prompt.
3. This will take a long time but wait until the phone has booted up into your phones setup (Do Not touch the Phone or Computer).
4. Setup Your Phone but don’t setup anything as we need to wipe it again, so skip through everything.
5. Once in the primary OS connect to WIFI
6. Go to Settings and Update your phone to the latest version, you will get a message prompting you that the Boot loader is unlocked etc, Ignore this and continue.
7. Click the reboot button when prompted, your Software will update to the latest version of Oxygen OS.
Once Updated:
1. Open Settings
2. Click About
3. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
4. Enable ADB USB Debugger
5. Unzip the Oxygen OS File
6. Open CMD and run it as Administrator
7. Plug Your Oneplus Nord into your PC
8. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
9. This will make the link before the next line quite long.
10. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot).
11. Once in Fastboot type “fastboot OEM lock” then your phone will prompt you if you want to Lock the bootloader.
12. Use the volume button to scroll down and press enter to confirm that you want to lock your bootloader.
13. When locked your phone will reboot and it will wipe your operating system and reboot your device into setup.
14. You can now setup your phone as you wish.
Click to expand...
Click to collapse
Or simply use MSM tool ?
https://forum.xda-developers.com/oneplus-nord/how-to/opnord-unbrick-tool-to-restore-device-t4148415
Reboot in recovery
Hello everyone, I need help.
I got the message "File system raw not supported." after executing the flash_all.bat and
Code:
boot_b, dtbo, modem_b, recovery, vbmeta, vbmeta_system,
was sent with status
Code:
OKAY
(the first part of the script, as far as I can see), then is supposed to reboot on fastboot and stays at
Code:
<waiting for any device>
, here is when my phone restarts in recovery instead (it says "fastbootd" in the upper part and a menu to select chinesse or english, but it's recovery mode, right?), then the first time I wited for 15 minutes but nothing happened, so I selected reboot into fastboot in recovery mode, then in CMD I got the message "fastboot: error Failed to boot into userspace fastboot; one or more components might be unbootable", and the seccond part of the script was executed, but with
Code:
FAILED (remote: 'Flashing is not allowed for Critical Partitions')
status in the writing process, and after,
Code:
"Invalid sparse file format at header magic"
with
Code:
FAILED (remote: 'Partition not found')
when trying to write system, vendor and product. My phone restarted and looked normar but wifi didn't work, and the UI started to fail after the configuration.
So I tried again, but without rebooting from recovery; how much time do I have to wait there?, maybe this will not work.
Please if someone knows how to solve my problem I'll be glad for the help.
MSM TOOL
https://forum.xda-developers.com/oneplus-nord/how-to/opnord-unbrick-tool-to-restore-device-t4148415
I succeeded from linux, everything seems to work fine now.
I just have one question, there's one file missing
fastboot flash storsec storsec.img
Is supposed to be like that or is that an important file missed?
That file doesn't exists in the 10.5.5-INDIA-NordOxygen_14_OTA_007_all_2008180229 zip file
I bricked my device and nothing (what i try) worked.
Hello Guys,
Thanks for the Roms and also for twrp @ mauronofrio!
If i try to flash in fastboot the roms, i get different fails:
the first part of commands are okay until "fastboot reboot fastboot"
than, until "fastboot flash xbl_config xbl_config.img" i get:
"writing 'xbl_config'...
FAILED (remote: Flashing is not allowed for Critical Partitions)"
and for the lasts, i get:
FAILED (remote: Partition not found)
I read that some windows-user have the same Problem and therrefore the Problem is not the bricked phone, is it right?
Someone knows the same Problem in linux? I prefer a solution without windows (msm-tool).
I tried to root and flash with twrp, now i know, it's impossible to flash zips until now. I try some other things with twrp, it's possible that i delete some partitions?
Someone have a good solution?
thanks for reading and support
Hi,
Few questions:
Has Global rom OP dialer? Can be enabled auto call recording with root or adb? I know abut Skvalex.
Can I flash 10.5.5 Global at 10.5.9 EEA (flash_all.bat)?
Getting stuck on odm and vendor flashing. It will not flash odm and vendor no file exists message (using flash all bat). Any help will be greatly appreciated.
Update: got it back to stock using edl mode.
You can flash this way. When you enter from the fastboot to the fastbootD mode Windows thinks it's a new device and doesn't recognize it. If you open device manager from control panel it will showns as unknow device. So all you have to do is install the driver again. Then you can flash anything you want in fastbootD.
-
What does "unbranded" mean here? Will I get OTA updates? Will this relock the bootloader?
delete
You can enable Auto brightness in any gsi rom..I made a special vendor.img file to enable it..
Required things:
1.unlocked bootloader.
2.working brain.
Steps:
1.Download and extract zip file from below link.
https://drive.google.com/file/d/1Bxhuj-GLByS5rf_w53mQTGK1GmnmDZzs/view?usp=drivesdk
You get 3 file vbmeta.img,vendor.img,boot.img(this file is for redmi 9 (Lancelot).do not flash those file on other phone which code name is not Lancelot)
2.flash vbmeta.img and boot.img via fastboot mood with below cmd
fastboot flash vbmeta vbmeta.img
fastboot flash boot boot.img
3.flash vendor.img via fastbootd mood with below cmd
fastboot flash vendor vendor.img
4. erase all userdata and boot your device .Now your auto brightness work...
Error fix:
1."file size is larger then partition size"if you get this type of Error then you need to type below cmd in fastbootd mood.
fastboot resize-logical-partition vendor 780
2.If you face any boot loop after flash and not solve it via erasing userdata the you need to flash magisk patch boot.img which you currently use:good::good:...evenif you get bootloop then first flash global v11.0.4.0 fastboot rom then follow my instruction again..
3.If brightness slider not work or headphones not detect then follow the below post.
https://forum.xda-developers.com/showpost.php?p=83635205&postcount=1
4.If you do not know how to flash gsi on redmi 9 (Lancelot) then follow below link.
https://forum.xda-developers.com/showpost.php?p=83533901&postcount=1
prove:
I provide a zip file link as attachment.unzip it and you get a video prove...
If my process work for you then don't forget to thanks me because it is free....
What have you done to the vbmeta?
koso000 said:
What have you done to the vbmeta?
Click to expand...
Click to collapse
Nothing but add some overlay file to vendor image. It is difficult now because we cannot Mount vendor image via custom recovery so I Mount it in Linux and some overlay file and give them permission that's it...
I nothing done with vbmeta.img. it is a blank file so no need to worry about it
It didn't work for me..could you share a guide to generate fix for my own vendor
I like to know if it's already possible to root device? I thought I could just patch boot image from a fastboot rom, but now I heard that boot.img is probably the recovery partition on A/B devices, while vendor_boot.img is probably the actual boot partition.
Is there a safe and working way to root yet?
Yes I have rooted my Mi 11 Lite 5G . I have also flashed EU rom via fastboot . The process is normal .. Download fast boot rom ..extract ..install latest Magisk application . Patch the boot.img in the images folder. Flash via fastboot ..
fastboot flash boot patchedboot.img
( name the patched file patchedboot.img)
Then you can also flash EU version rom with flash all bat in the fastbootrom.
Thanks for the info. If nothings changing my plans, I will flash tomorrow evening.
I'm my case I flash latest stable.
KevMetal said:
Yes I have rooted my Mi 11 Lite 5G . I have also flashed EU rom via fastboot . The process is normal .. Download fast boot rom ..extract ..install latest Magisk application . Patch the boot.img in the images folder. Flash via fastboot ..
fastboot flash boot patchedboot.img
( name the patched file patchedboot.img)
Then you can also flash EU version rom with flash all bat in the fastbootrom.
Click to expand...
Click to collapse
Hi
With that ROM do you have full screen gestures working with other launchers?
To install this ROM the bootloader needs to be unlocked?
Thanks
chlodvig said:
Hi
With that ROM do you have full screen gestures working with other launchers?
To install this ROM the bootloader needs to be unlocked?
Thanks
Click to expand...
Click to collapse
Yes you need to unlock for flashing but can relock when done if you are flashing official stuff without root .. I'm on latest BETA EU rom and I'm using lawnchair 2 in combo with fluid gestures application to get workaround to get full screen gestures working really well . I'm not aware of which other launchers supppet full screen gestures on miui on amdroid 11 ... Theoretically according to dev of fluid gestures it shouldn't be working ... Cos it's android 11 and MIUI blocks 3rd party gesture apps ..or Google does ..anyway it works with or without root but I have only used lawnchair 2.
Thanks @KevMetal
I was hoping that with that ROM I would be a able to use for example Nova Launcher with gestures.
But that seems to not be the case
Thanks
chlodvig said:
Thanks @KevMetal
I was hoping that with that ROM I would be a able to use for example Nova Launcher with gestures.
But that seems to not be the case
Thanks
Click to expand...
Click to collapse
I'm not saying no . I'm just saying the only workable situation I've found ... It's worth a try .. Install Nova and Fluid gestures.. If it fails try flashing EU rom using that ..failing again try the combo with Magisk .. Still failing replace Nova with Lawnchair...unless you specifically need Nova .. Or if simply don't want to unlock boot.. But is the first thing I do MIUI to get rid of all the bloat systemlessly with Magisk
I will try.
Thanks
Hi, I've seen somewhere, in root method to know before patching, to know if it's A/B partition or not...but how to know that???
thank's
I've been using a Note 3 for 8 years, so I discover the xiaomi universe and the locked bootloader and ....
rayman95 said:
Hi, I've seen somewhere, in root method to know before patching, to know if it's A/B partition or not...but how to know that???
thank's
I've been using a Note 3 for 8 years, so I discover the xiaomi universe and the locked bootloader and ....
Click to expand...
Click to collapse
No you don't need to know .. Just patch the boot image of the fastboot rom with magisk application on your phone. We don't have a twrp and you need to unlock your bootloader ALWAys on EVERY phone to root or use twrp .. Anyway unlock it ..it's no big deal ..then flash via fast boot
fastboot flash boot bootPatched.img
chlodvig said:
I will try.
Thanks
Click to expand...
Click to collapse
I am using nova launcher combined with fluid gestures. That's working pretty good. Unfortunately stock gestures do not work with third party launcher
putti71 said:
I am using nova launcher combined with fluid gestures. That's working pretty good. Unfortunately stock gestures do not work with third party launcher
Click to expand...
Click to collapse
Yes, I tried also and it works.
I just want to be sure before beginning the procedure...tommorow, it's 7 days wait for unlock the phone...
I use batch unlock tool and it wipe the phone
after complete setup again, I copy boot.img from fastboot on phone and flash it with last magisk and then I flash it in fastboot mode.
and I have to flash complete EU rom with flash all command??? but it will overwrite patched boot with stock one???
do I miss something or not??
thank's
rayman95 said:
I just want to be sure before beginning the procedure...tommorow, it's 7 days wait for unlock the phone...
I use batch unlock tool and it wipe the phone
after complete setup again, I copy boot.img from fastboot on phone and flash it with last magisk and then I flash it in fastboot mode.
and I have to flash complete EU rom with flash all command??? but it will overwrite patched boot with stock one???
do I miss something or not??
thank's
Click to expand...
Click to collapse
sorry my bad
1. request unlock (7 days)
2. use batch unlock tool to unluck ( will wipe device ) *use volume down & powet to enter fastboot
3. boot the device and enable dev settings by tapping on miui version 7 times
4. the unlock toggle will be on but you need to activate adb debug again
5. install adb/ fastboot on PC
6. connect phone via usb cable
7. open cmd window from inside adb folder
8. run following cmd
adb devices
( will ask on phone for authorization) GIVE it !
adb reboot bootloader
( will boot into fastboot )
fastboot devices
( will return a value)
9. extract MIUI EU fastboot rom
10. run flash_all_bat as admin
( WAIT EVEN IF IT SEEMS LONG)
11. when success boot phone and setup and repeat steps 3&4
12. install magisk app
13. copy boot.img from the MIUI EU fastboot ROM to phone
14. inside magisk select it and patch it
15. copy file to adb folder and give name "patchedboot.img"
16. now repeat steps 6&7&8
17. when in fastboot run cmd
fastboot flash boot patchedboot.img
18. reboot & enjoy
KevMetal said:
sorry my bad
1. request unlock (7 days)
2. use batch unlock tool to unluck ( will wipe device ) *use volume down & powet to enter fastboot
3. boot the device and enable dev settings by tapping on miui version 7 times
4. the unlock toggle will be on but you need to activate adb debug again
5. install adb/ fastboot on PC
6. connect phone via usb cable
7. open cmd window from inside adb folder
8. run following cmd
adb devices
( will ask on phone for authorization) GIVE it !
adb reboot bootloader
( will boot into fastboot )
fastboot devices
( will return a value)
9. extract MIUI EU fastboot rom
10. run flash_all_bat as admin
( WAIT EVEN IF IT SEEMS LONG)
11. when success boot phone and setup and repeat steps 3&4
12. install magisk app
13. copy boot.img from the MIUI EU fastboot ROM to phone
14. inside magisk select it and patch it
15. copy file to adb folder and give name "patchedboot.img"
16. now repeat steps 6&7&8
17. when in fastboot run cmd
fastboot flash boot patchedboot.img
18. reboot & enjoy
Click to expand...
Click to collapse
whao, this is a perfect tuto.....will do it tomorrow or friday.....merci beaucoup..
KevMetal said:
10. run flash_all_bat as admin
( WAIT EVEN IF IT SEEMS LONG)
Click to expand...
Click to collapse
unlock is ok, but is it normal that after flash all, nothing happens on phone and computer???
thanks
but do I have to use xiaomi flash tool??? because I tried on folder to execute flassall and nothing happens...so I dl flash tool
rayman95 said:
unlock is ok, but is it normal that after flash all, nothing happens on phone and computer???
thanks
Click to expand...
Click to collapse
Nothing no, but the process slow ..the fastboot command window must show commands running as it sends the .img files to phone ... What does it say in fastboot window ? Did you remember to use adb command to boot to fastboot ? Did you leave fastboot command window open..
If you send photos or more info about everything you did I can help more
KevMetal said:
Nothing no, but the process slow ..the fastboot command window must show commands running as it sends the .img files to phone ... What does it say in fastboot window ? Did you remember to use adb command to boot to fastboot ? Did you leave fastboot command window open..
If you send photos or more info about everything you did I can help more
Click to expand...
Click to collapse
I use adb tool to reboot on BL then I flash-all, windows ask confirmation to run on admin...a window open and close immediately..and nothing happens on the phone, it still fastboot....the adb window is still open and nothing on it...
but do I have to use xiaomi flash tool???
on flash tool, it's possible to select flash-all command..
rayman95 said:
I use adb tool to reboot on BL then I flash-all, windows ask confirmation to run on admin...a window open and close immediately..and nothing happens on the phone, it still fastboot....the adb window is still open and nothing on it...
but do I have to use xiaomi flash tool???
on flash tool, it's possible to select flash-all command..
Click to expand...
Click to collapse
No it uses fast boot .inside fastboot folder open command window and type
Fastboot devices
Tell me what happens.. Send photo
KevMetal said:
No it uses fast boot .inside fastboot folder open command window and type
Fastboot devices
Tell me what happens.. Send photo
Click to expand...
Click to collapse
device recognized and reboot with command but
fastboot devices
( will return a value)
no value in cmd window or in fastboot on phone
Hi, first of all, I'm not a dev or else just user who had difficulties to flash GSI on my phone... Was 7 years with a samsung galaxy Note 3, with twrp....So easy to flash....
with the help of @gr0ndpa, thanks to him.....
FLASH GSI
Now I will explain how to flash easily with files attached
1/ first of all you need a phone and drivers installed, use xiaomi pc suite, unzip and install it
2/ you need to activate USB debug in dev options.
3/ dl adb folder unzip it and put in C
4/ run command and type
Code:
cd /adb
5/ then
Code:
adb devices
to check if phone recognised
6/
Code:
adb reboot bootloader
once in fast boot
7/
Code:
fastboot flash vbmeta vbmeta.img
wait finished type to enter in fastbootD
8/
Code:
fastboot reboot fastboot
9/
Code:
fastboot flash system
LiR 313.XXX.img
you will have a system error, but wait the flash begin in few seconds
at the end wait ok then
10/
Code:
fastboot reboot recovery
on stock recover
11/ wipe data and reboot with +/- and PWR
and you're done...
In case you want to flash custom kernel or patched boot image to root with magisk, you have to
12/
Code:
adb reboot bootloader
Copy kernel boot image to C drive and rename kernel boot image to boot.img.
13/
Code:
fastboot flash boot c:\boot.img
14/
Code:
fastboot reboot
In case you want to flash twrp put the file to adb folder and type in fastboot
15/
Code:
fastboot boot twrp.img
Downloads for : Xiaomi Mi 11 Lite 5G | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
You can check what I ve done on tuto ss...
if you have some comments, don't hesitate...
I flashed LiR 18.1 rom and very happy with it.....
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++==================================================================================================================================================================================================================++
Flash ROM
This now how to flash ROM on your device, it's convenient for all roms like LOS, corvus, awaken...
First you need all the proper drivers installed and unlocked bootloader, USB debugging all of that stuff.
Now open up a cmd/terminal , and put the files i sent and the ROM file in the folder from where you're opening the cmd/terminal and connect the phone (you may need to put ./ as an suffix for all the commands if you're on linux)
Type
Code:
adb reboot bootloader
Then type
Code:
fastboot devices
to see if everything is ok
Then type
Code:
fastboot flash boot_ab boot.img
(you can drag and drop the file instead of typing it)
After that's done type
Code:
fastboot flash vendor_boot_ab vendor_boot.img
(you can drag and drop this too if you want)
Code:
fastboot flash dtbo dtbo.img
(you can drag and drop this too if you want)
After that's done type
Code:
fastboot reboot recovery
This will boot you into a recovery and now you need to go to wipe and format data
After that go to apply update then adb sideload then
In the cmd type
Code:
adb sideload rom.zip
for example (you put the ROM zip here you can drag and drop it)
Wait for that to finish it will go to 47% and on the phone it will show step 1/2 then step 2/2
and when it's done it's gonna show an error
adb: failed to read command: No error
Then you can reboot to system
Hello thank your for the short HowTo. Unfortunately im stuck on invalid sparse error. Could you pls post a fix to solve this? Would appreciate your help.
hardshell said:
Hello thank your for the short HowTo. Unfortunately im stuck on invalid sparse error. Could you pls post a fix to solve this? Would appreciate your help.
Click to expand...
Click to collapse
You have to wait at least 30 sec after the error appear...
Are you sure you are on fastbootD???
tuto modified and completed to also root device with magisk and patch boot.img
when i restart into fastboot, it is frozen.
dy2592 said:
when i restart into fastboot, it is frozen.
Click to expand...
Click to collapse
normal, nothing happens on fastboot....when you flash, only thing is on your computer, not on screen..
cant seem to get this installed =(
rayman95 said:
8/
Code:
fastboot reboot fastboot
Click to expand...
Click to collapse
After I enter this, it just stays on waiting for any device.
Update: I was able to figure it out. My device had no drivers so I went search through updates on windows and installed a LeMobile Android driver os it shows up properly in device manager.
How does one install gapps?
dy2592 said:
After I enter this, it just stays on waiting for any device.
View attachment 5419437
Update: I was able to figure it out. My device had no drivers so I went search through updates on windows and installed a LeMobile Android driver os it shows up properly in device manager.
Click to expand...
Click to collapse
because you don't have xiaomi drivers installed...install xiaomi pc suite and you will have drivers installed...
duplicate
rayman95 said:
In step 14, I encountered the error "fastboot: error: ANDROID_PRODUCT_OUT not set" after executing the fastboot flash system command. what do I need to do?
Click to expand...
Click to collapse
Did you insert the img at the end?
Fastboot flash system LIRxxxxxxxxxxxx.img
you have to put your rom to adb folder and dont forget to add .img at the end
rayman95 said:
you have to put your rom to adb folder and dont forget to add .img at the end
Click to expand...
Click to collapse
1.img is your rom Is there anything else missing?
dy2592 said:
Did you insert the img at the end?
Fastboot flash system LIRxxxxxxxxxxxx.img
Click to expand...
Click to collapse
yaha your right thank you so much
rayman95 said:
you have to put your rom to adb folder and dont forget to add .img at the end
Click to expand...
Click to collapse
thank I solved my problem. Now I have another problem, how to install GAPPs
Patrick Star_ said:
thank I solved my problem. Now I have another problem, how to install GAPPs
Click to expand...
Click to collapse
run twrp, it's explain in 1st post or maybe try with magisk...I can install minimicroG nogoolag with it..
rayman95 said:
run twrp, it's explain in 1st post or maybe try with magisk...I can install minimicroG nogoolag with it..
Click to expand...
Click to collapse
I tried to use twrp to brush into GAPP, but the error is 70. How can I solve it? I don't know if there is a problem with my twrp. Can you send a tutorial on xiaomi11 Lite 5g installing twrp? Thank you very much
Patrick Star_ said:
I tried to use twrp to brush into GAPP, but the error is 70. How can I solve it? I don't know if there is a problem with my twrp. Can you send a tutorial on xiaomi11 Lite 5g installing twrp? Thank you very much
Click to expand...
Click to collapse
In case you want to flash twrp put the file to adb folder and type in fastboot
15/
Code:
fastboot boot twrp.img
And twrp link is in post 1..maybe you choose bad gapps variant