Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash modem modem.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot reboot fastboot
fastboot flash abl abl.img
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash featenabler featenabler.img
fastboot flash hyp hyp.img
fastboot flash imagefv imagefv.img
fastboot flash keymaster keymaster.img
fastboot flash logo logo.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash odm odm.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
I was already waiting for it.:laugh:
mauronofrio said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Others Commands to flash a fastboot rom
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
Click to expand...
Click to collapse
I an waiting for TWRP...
cieffe54 said:
I an waiting for TWRP...
Click to expand...
Click to collapse
Check development thread
cieffe54 said:
I an waiting for TWRP...
Click to expand...
Click to collapse
And i am waiting for end of corona pandemic.
Kollachi said:
And i am waiting for end of corona pandemic.
Click to expand...
Click to collapse
But i shared it too...
Hello and thank you for the fastboot roms !
How To Use This!
mauronofrio said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash modem modem.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot reboot fastboot
fastboot flash abl abl.img
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash featenabler featenabler.img
fastboot flash hyp hyp.img
fastboot flash imagefv imagefv.img
fastboot flash keymaster keymaster.img
fastboot flash logo logo.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash odm odm.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
Click to expand...
Click to collapse
Oneplus Nord oxygen os install guide
Get OEM Drivers from https://oneplususbdrivers.com/download-oneplus-usb-driver/
Download Oxygen OS 10.5.4 for your compatible devices from https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
(Boot loader Must be Unlocked)
If still able to boot into any version of Android:
1. Install Oneplus OEM Drivers
2. Open Settings
3. Click About
4. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
5. Enable ADB USB Debugger
6. Unzip the Oxygen OS File
7. Open CMD and run it as Administrator
8. Plug Your Oneplus Nord into your PC
9. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
10. This will make the link before the next line quite long.
11. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot)
If You are Unable to boot into any Operating System:
1. Install Oneplus OEM Drivers
2. Unzip the Oxygen OS File
3. Open CMD and run it as Administrator
4. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
5. This will make the link before the next line quite long.
6. Plug Your Oneplus Nord into your Computer
7. When your phone is powered off, Hold Volume Up, Volume Down and the Power Button until you get the Oneplus Logo with fastboot Beneath.
Once in the Bootloader:
1. Type fastboot devices to confirm that your device has been recognised by your PC.
2. After this Open the Oxygen OS Folder and double click Flash-All.adb and It will open in command Prompt.
3. This will take a long time but wait until the phone has booted up into your phones setup (Do Not touch the Phone or Computer).
4. Setup Your Phone but don’t setup anything as we need to wipe it again, so skip through everything.
5. Once in the primary OS connect to WIFI
6. Go to Settings and Update your phone to the latest version, you will get a message prompting you that the Boot loader is unlocked etc, Ignore this and continue.
7. Click the reboot button when prompted, your Software will update to the latest version of Oxygen OS.
Once Updated:
1. Open Settings
2. Click About
3. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
4. Enable ADB USB Debugger
5. Unzip the Oxygen OS File
6. Open CMD and run it as Administrator
7. Plug Your Oneplus Nord into your PC
8. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
9. This will make the link before the next line quite long.
10. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot).
11. Once in Fastboot type “fastboot OEM lock” then your phone will prompt you if you want to Lock the bootloader.
12. Use the volume button to scroll down and press enter to confirm that you want to lock your bootloader.
13. When locked your phone will reboot and it will wipe your operating system and reboot your device into setup.
14. You can now setup your phone as you wish.
there's not oneplus widget? i can't find it
Jackmitchell62 said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Others Commands to flash a fastboot rom
Oneplus Nord oxygen os install guide
Get OEM Drivers from https://oneplususbdrivers.com/download-oneplus-usb-driver/
Download Oxygen OS 10.5.4 for your compatible devices from https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
(Boot loader Must be Unlocked)
If still able to boot into any version of Android:
1. Install Oneplus OEM Drivers
2. Open Settings
3. Click About
4. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
5. Enable ADB USB Debugger
6. Unzip the Oxygen OS File
7. Open CMD and run it as Administrator
8. Plug Your Oneplus Nord into your PC
9. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
10. This will make the link before the next line quite long.
11. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot)
If You are Unable to boot into any Operating System:
1. Install Oneplus OEM Drivers
2. Unzip the Oxygen OS File
3. Open CMD and run it as Administrator
4. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
5. This will make the link before the next line quite long.
6. Plug Your Oneplus Nord into your Computer
7. When your phone is powered off, Hold Volume Up, Volume Down and the Power Button until you get the Oneplus Logo with fastboot Beneath.
Once in the Bootloader:
1. Type fastboot devices to confirm that your device has been recognised by your PC.
2. After this Open the Oxygen OS Folder and double click Flash-All.adb and It will open in command Prompt.
3. This will take a long time but wait until the phone has booted up into your phones setup (Do Not touch the Phone or Computer).
4. Setup Your Phone but don’t setup anything as we need to wipe it again, so skip through everything.
5. Once in the primary OS connect to WIFI
6. Go to Settings and Update your phone to the latest version, you will get a message prompting you that the Boot loader is unlocked etc, Ignore this and continue.
7. Click the reboot button when prompted, your Software will update to the latest version of Oxygen OS.
Once Updated:
1. Open Settings
2. Click About
3. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
4. Enable ADB USB Debugger
5. Unzip the Oxygen OS File
6. Open CMD and run it as Administrator
7. Plug Your Oneplus Nord into your PC
8. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
9. This will make the link before the next line quite long.
10. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot).
11. Once in Fastboot type “fastboot OEM lock” then your phone will prompt you if you want to Lock the bootloader.
12. Use the volume button to scroll down and press enter to confirm that you want to lock your bootloader.
13. When locked your phone will reboot and it will wipe your operating system and reboot your device into setup.
14. You can now setup your phone as you wish.
Click to expand...
Click to collapse
Or simply use MSM tool ?
https://forum.xda-developers.com/oneplus-nord/how-to/opnord-unbrick-tool-to-restore-device-t4148415
Reboot in recovery
Hello everyone, I need help.
I got the message "File system raw not supported." after executing the flash_all.bat and
Code:
boot_b, dtbo, modem_b, recovery, vbmeta, vbmeta_system,
was sent with status
Code:
OKAY
(the first part of the script, as far as I can see), then is supposed to reboot on fastboot and stays at
Code:
<waiting for any device>
, here is when my phone restarts in recovery instead (it says "fastbootd" in the upper part and a menu to select chinesse or english, but it's recovery mode, right?), then the first time I wited for 15 minutes but nothing happened, so I selected reboot into fastboot in recovery mode, then in CMD I got the message "fastboot: error Failed to boot into userspace fastboot; one or more components might be unbootable", and the seccond part of the script was executed, but with
Code:
FAILED (remote: 'Flashing is not allowed for Critical Partitions')
status in the writing process, and after,
Code:
"Invalid sparse file format at header magic"
with
Code:
FAILED (remote: 'Partition not found')
when trying to write system, vendor and product. My phone restarted and looked normar but wifi didn't work, and the UI started to fail after the configuration.
So I tried again, but without rebooting from recovery; how much time do I have to wait there?, maybe this will not work.
Please if someone knows how to solve my problem I'll be glad for the help.
MSM TOOL
https://forum.xda-developers.com/oneplus-nord/how-to/opnord-unbrick-tool-to-restore-device-t4148415
I succeeded from linux, everything seems to work fine now.
I just have one question, there's one file missing
fastboot flash storsec storsec.img
Is supposed to be like that or is that an important file missed?
That file doesn't exists in the 10.5.5-INDIA-NordOxygen_14_OTA_007_all_2008180229 zip file
I bricked my device and nothing (what i try) worked.
Hello Guys,
Thanks for the Roms and also for twrp @ mauronofrio!
If i try to flash in fastboot the roms, i get different fails:
the first part of commands are okay until "fastboot reboot fastboot"
than, until "fastboot flash xbl_config xbl_config.img" i get:
"writing 'xbl_config'...
FAILED (remote: Flashing is not allowed for Critical Partitions)"
and for the lasts, i get:
FAILED (remote: Partition not found)
I read that some windows-user have the same Problem and therrefore the Problem is not the bricked phone, is it right?
Someone knows the same Problem in linux? I prefer a solution without windows (msm-tool).
I tried to root and flash with twrp, now i know, it's impossible to flash zips until now. I try some other things with twrp, it's possible that i delete some partitions?
Someone have a good solution?
thanks for reading and support
Hi,
Few questions:
Has Global rom OP dialer? Can be enabled auto call recording with root or adb? I know abut Skvalex.
Can I flash 10.5.5 Global at 10.5.9 EEA (flash_all.bat)?
Getting stuck on odm and vendor flashing. It will not flash odm and vendor no file exists message (using flash all bat). Any help will be greatly appreciated.
Update: got it back to stock using edl mode.
You can flash this way. When you enter from the fastboot to the fastbootD mode Windows thinks it's a new device and doesn't recognize it. If you open device manager from control panel it will showns as unknow device. So all you have to do is install the driver again. Then you can flash anything you want in fastbootD.
-
What does "unbranded" mean here? Will I get OTA updates? Will this relock the bootloader?
delete
Requirements:
1.chaina fastboot rom(v11.0.3.0 needed)
2,chaina MIUI 12 beta stable recovery rom from here...
https://bigota.d.miui.com/V12.0.1.0.QJCCNXM/miui_LANCELOT_V12.0.1.0.QJCCNXM_79579275a0_10.0.zip
or
I extract system.img, vendor.img and product.img for you...
I attached a txt file with this post download and find link of 4 parts.. download all parts and get those 3 files.flash them via given instructions.no need to follow the extraction guide
3.A laptop with Linux os (python 2.7 or higher)
you can also use windows
4.Warking brain...
Step 1:
You need to make system.img,vendor.img and product.img from the recovery rom...
For system.img you need two file from zip
1.system.new.dat.br
2.system.transfer.list
Now you have to extract system.new.dat from system.new.dat.br via this cmd
brotli -d system.new.dat.br
After that you can make system.img..follow this link to do so..
https://github.com/danielmmmm/dat2img
For vendor and product repeat the process above.
Step 2;
Go to fastboot mood (not fastbootd mood)and connect your phone with PC
Extract chaina fastboot rom and go to image folder and run below cmd on terminal
fastboot flash super super.img
fastboot flash boot boot.img
fastboot flash vbmeta vbmeta.img
(Use vbmeta from this post not yours)
Now go phone recovery and warp all data....
Try to boot your device to check if any boot loop issue..
flash full fastboot rom is more safe or you get bootloop do not forget to flash vbmeta.img again
If no bootloop then go to recovery again and Now select number 3 option on your stock recovery and type this cmd
and reboot fastboot
Now you are in fastbootd mood
Go to file directory where you make 3 IMG file and run this cmd
fastboot flash system system.img (you muat get"invaild sparec image...." Error,ignor it)
fastboot flash vendor vendor.img
fastboot flash product product.img
maintain this flash sequence
After doing so again go to recovery and wape data now reboot your device and enjoy MIUI 12
Bonus;The system.img which you made can be use as gsi.you can install it on any redmi 9 rom without flash boot and super partition... although some options can not be found like new notification panel
Night mode in camera available in MIUI 12 for Redmi 9?
Sammar Prince said:
Night mode in camera available in MIUI 12 for Redmi 9?
Click to expand...
Click to collapse
No it is not present
Why can not be found like new notification panel Please help
MifritMoo said:
Why can not be found like new notification panel Please help
Click to expand...
Click to collapse
You have to go setting..then display ,then
Control center and notification shade ,then turn on "use new control center" ...
By the way can you install MIui 12 without being a beta tester??
Is the gyroscope a little bit more accurate in Miui 12 in redmi 9 ???
Shas45558 said:
You have to go setting..then display ,then
Control center and notification shade ,then turn on "use new control center" ...
By the way can you install MIui 12 without being a beta tester??
Click to expand...
Click to collapse
Yes , now i can use thank you very much
mohmedaref1 said:
Is the gyroscope a little bit more accurate in Miui 12 in redmi 9 ???
Click to expand...
Click to collapse
No i do not notice any difference..
Hi all
i want to install TWRP on my Doogee N20PRO . i cannot find a TWRP File on the internet to install. I could find some for the N20 but not for the N20PRO. it´s an Helios P60 Processor with an MTK6771. I tried to install the HAVOC 3.7 but i get the Message "writing 1/15 failed (remote: this partition doesn´t exist)
beinfo said:
Hi all
i want to install TWRP on my Doogee N20PRO . i cannot find a TWRP File on the internet to install. I could find some for the N20 but not for the N20PRO. it´s an Helios P60 Processor with an MTK6771. I tried to install the HAVOC 3.7 but i get the Message "writing 1/15 failed (remote: this partition doesn´t exist)
Click to expand...
Click to collapse
This is simple about TWRP: Your phone have МТК Helio Р60 MT6771V/CA WITH Android 10.0 and it's a NEW phone now. So no developments yet.
For install GSI ROMs your need unlock bootloader and after follow the correct instructions to new phones shipped with A10!
If you only want install GSI so I suggest:
1- Have stock ROM first, always!!;
2- With security 1- you should unlock bootloader;
3- You can install GSI with stock recovery without problems.
The only part is: you cannot backup userdata.....
DragonPitbull said:
This is simple about TWRP: Your phone have МТК Helio Р60 MT6771V/CA WITH Android 10.0 and it's a NEW phone now. So no developments yet.
For install GSI ROMs your need unlock bootloader and after follow the correct instructions to new phones shipped with A10!
If you only want install GSI so I suggest:
1- Have stock ROM first, always!!;
2- With security 1- you should unlock bootloader;
3- You can install GSI with stock recovery without problems.
The only part is: you cannot backup userdata.....
Click to expand...
Click to collapse
Cool This helps already a lot.
i unlocked the Bootloader properly, but then i got a partition error. I assume i´ve an error in the command line. The phone was anyway only an interim solution till my POco F2 was back from repair. now i use it as a playground.
fastboot erase system - there i get a partition error.
erasing the User data was sucessful
but then
fastboot flash system system.img it stops at step 1/15 again for the partition error (partition doesn´t exist) Stock rom is available.
somebody knows the options i´ve to add to the command line?
beinfo said:
The phone was anyway only an interim solution till my POco F2 was back from repair. now i use it as a playground.
fastboot erase system - there i get a partition error.
erasing the User data was sucessful
but then
fastboot flash system system.img it stops at step 1/15 again for the partition error (partition doesn´t exist) Stock rom is available.
somebody knows the options i´ve to add to the command line?
Click to expand...
Click to collapse
Try but REMENBER I am not responsible for any errors. Bootloader should unlocked by adb-fastboot!!
Spoiler: Instructions
1. You need know the difference about fastboot and FASTBOOTD in your device!!
Your device has bootloader mode: recovery - fastboot - reboot (system)
Stock recovery has very options: reboot system - reboot to bootloader - wipe - Enter fastboot - ...
reboot to bootloader => normal fastboot
Enter fastboot => FASTBOOTD
FASTBOOTD => some options
2. Device in fastboot
Code:
fastboot --disable-verification flash vbmeta vbmeta.img
vbmeta file from stock ROM or pulled from device
3.
Code:
fastboot -w
4.
Code:
fastboot reboot fastboot
(you MUST be at the FASTBOOTD menu now. If not, you will not be able to flash the GSI successfully)
5.
Code:
fastboot erase system
or
Code:
fastboot delete-logical-partition system
6.
Code:
fastboot delete-logical-partition product
- deletes the product partition, allowing a larger system partition
I not need resize-logical-partition product. But if you want:
You will need a larger system partition to flash a GSI. There are 2 ways to achieve this
6A. fastboot resize-logical-partition product 509344768
6B. fastboot resize-logical-partition system 3089272064 or 3889272064
resizes product and system partitions. This gives you about 3GB of system partitions. You can adjust or arrive at your own numbers if you want different sizes.
7.
Code:
fastboot --disable-verity --disable-verification flash system GSI.img
8.
Code:
fastboot -w
for confirm great & fast start GSI
9.
Code:
fastboot reboot bootloader
9A.
Code:
fastboot erase userdata
for confirm and boot clean
10. Reboot to system
Code:
fastboot reboot
Enjoy
I also have an N20 Pro which I received Dec 2020. Had some trouble setting it up. I got the OEM ROM from Doogee customer support and was able to extract the boot image and patch it with Magisk. I then burned it with the SP Flash tool. It wouldn't boot until I burned a special vbmeta.img to turn off encryption. Now it's working fine.
Sorry this doesn't help you with TWRP but I think most people looking for TWRP are really looking to root their phone.
beinfo said:
Hi all
i want to install TWRP on my Doogee N20PRO . i cannot find a TWRP File on the internet to install. I could find some for the N20 but not for the N20PRO. it´s an Helios P60 Processor with an MTK6771. I tried to install the HAVOC 3.7 but i get the Message "writing 1/15 failed (remote: this partition doesn´t exist)
Click to expand...
Click to collapse
Okay so what ive seen is that you should avoid flashing custom roms via adb fastboot especially with our doogee phones, and also there are many incompatiable roms so what you will need is to unlock bootloader and do the whole twrp install thing adn also install magisk
before hand install treble info from google playstore and take down the information "arm64 a/b" and search for roms with that information to install custom os/rom/gsi properly. GSI versions are more preferred if your phone supports treblle
if your twrp keeps getting wiped after reboot open file :mount your system and connect to pc via usbcable (mtp if not showing disable mtp and re- enable it )
now got to where build.prop is saved there will be a file called recovery from boot.p , copy the file to pc , open with notepad, remove everything , save and copy back to phone (overwrite)
then go ahead and install magisk
make sure your magisk is working install edxposed, riru core , and busybox ndk get the apps you need for them (edxposed manager...) and then instal and activate a module which you can test if its working(if framework is active in edxposed manager and the module working correctly then you can go ahead and
Install custom os through twrp
follow these instructions ( https://forum.xda-developers.com/t/...lexperience-10-gsi-android-10-stable.4081685/ ) with your custom rom (corvus, havoc, lineage...
(the g-apps didnt flash for me (error code 64) but i just rebooted and everything was working fine (including gapps but camera sucked (doogee's rear camera setup was just terrible))
https://forum.xda-developers.com/t/...lexperience-10-gsi-android-10-stable.4081685/
** i can confirm follow instructions properly and it should work (i used this pixel experience on my doogee n20 make sure you unzip the .xz file and youre flashing a .img file
**also make sure its the gsi file (
Hi!
I cant enter the MSM Download Tool app provided in ROMs folder. Does anyone know hoy to solve it?
I need to unbrick my phone
Sorry to say that you will have to pay an Indian to recover your phone, the MSM downloader requires an authorized id
I have a similar problem: accidentally i format the system partition and now i can only enter in recovery e fastboot mode but i can't install anything roms. Is there a way to restore stock rom or force a custom rom? Thanks.
I fixed it using part of this guide ->https://forum.xda-developers.com/t/unbrick-realme-7-pro-ui-1-0-android10.4347457/:
- Flash a custom recovery (i use twrp) and start the phone in recovery.
- Download the official rom ozip for realme 7 pro (i use the eu version).
- Start the phone in recovery and connect the phone to a pc and copy the ozip in it (i created a folder named "roms").
- Download a OFP Rom (the only i find are indian version).
- Download "MCT ofp extract tool" (for prevent virus warning it is possible use a vm machine...i used a second pc) and extract the OFP Rom.
- Download "minimal adb portable" and extract in the OFP Rom folder (where are the files of ofp rom extracted).
- Via fastboot flash the follow img:
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot flash vbmeta_vendor vbmeta_vendor.img
fastboot flash super super.img
fastboot flash boot boot.img
fastboot flash persist persist.img
fastboot flash recovery recovery.img
- Now start the phone in recovery (will be the stock recovery).
- Wipe and after that flash the ozip file.
- After that format the memory phone (always via stock recovery).
- Reboot and that's all the phone start via with stock rom.
After configuration there are some update with the last ota dated 28/10/2021.
I hope, someone, will find it usefull.
alien762 said:
I fixed it using part of this guide ->https://forum.xda-developers.com/t/unbrick-realme-7-pro-ui-1-0-android10.4347457/:
- Flash a custom recovery (i use twrp) and start the phone in recovery.
- Download the official rom ozip for realme 7 pro (i use the eu version).
- Start the phone in recovery and connect the phone to a pc and copy the ozip in it (i created a folder named "roms").
- Download a OFP Rom (the only i find are indian version).
- Download "MCT ofp extract tool" (for prevent virus warning it is possible use a vm machine...i used a second pc) and extract the OFP Rom.
- Download "minimal adb portable" and extract in the OFP Rom folder (where are the files of ofp rom extracted).
- Via fastboot flash the follow img:
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot flash vbmeta_vendor vbmeta_vendor.img
fastboot flash super super.img
fastboot flash boot boot.img
fastboot flash persist persist.img
fastboot flash recovery recovery.img
- Now start the phone in recovery (will be the stock recovery).
- Wipe and after that flash the ozip file.
- After that format the memory phone (always via stock recovery).
- Reboot and that's all the phone start via with stock rom.
After configuration there are some update with the last ota dated 28/10/2021.
I hope, someone, will find it usefull.
Click to expand...
Click to collapse
bro i did everything and i unbricked my phone successfully (thanks to you and that thread https://forum.xda-developers.com/t/unbrick-realme-7-pro-ui-1-0-android10.4347457/ )
but i still have a problem that my fingerprint doesn't work and i did not backup persist.
please help me bro - Thanks in advance.
alien762 said:
I fixed it using part of this guide ->https://forum.xda-developers.com/t/unbrick-realme-7-pro-ui-1-0-android10.4347457/:
- Flash a custom recovery (i use twrp) and start the phone in recovery.
- Download the official rom ozip for realme 7 pro (i use the eu version).
- Start the phone in recovery and connect the phone to a pc and copy the ozip in it (i created a folder named "roms").
- Download a OFP Rom (the only i find are indian version).
- Download "MCT ofp extract tool" (for prevent virus warning it is possible use a vm machine...i used a second pc) and extract the OFP Rom.
- Download "minimal adb portable" and extract in the OFP Rom folder (where are the files of ofp rom extracted).
- Via fastboot flash the follow img:
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot flash vbmeta_vendor vbmeta_vendor.img
fastboot flash super super.img
fastboot flash boot boot.img
fastboot flash persist persist.img
fastboot flash recovery recovery.img
- Now start the phone in recovery (will be the stock recovery).
- Wipe and after that flash the ozip file.
- After that format the memory phone (always via stock recovery).
- Reboot and that's all the phone start via with stock rom.
After configuration there are some update with the last ota dated 28/10/2021.
I hope, someone, will find it usefull.
Click to expand...
Click to collapse
Hi, man.
I really need help with this one. I have a bricked device.
So, can you provide me with the twrp? I tried to install one but can't find the right one. Also, I'm stuck with this "boot destroyed" thing. Have tried to fix it--and it seems there's step in your solution above that I've tried as well (aka. flashing boot, vbmeta, super, etc.) but still can't get it work. Do you have any idea?
Cause it seems that I have to fix the boot destroyed thing first.
TIA
pls bro help me...Wipe and after that flash the ozip file?OZIP THATS mean stock rom or?
alien762 said:
I fixed it using part of this guide ->https://forum.xda-developers.com/t/unbrick-realme-7-pro-ui-1-0-android10.4347457/:
- Flash a custom recovery (i use twrp) and start the phone in recovery.
- Download the official rom ozip for realme 7 pro (i use the eu version).
- Start the phone in recovery and connect the phone to a pc and copy the ozip in it (i created a folder named "roms").
- Download a OFP Rom (the only i find are indian version).
- Download "MCT ofp extract tool" (for prevent virus warning it is possible use a vm machine...i used a second pc) and extract the OFP Rom.
- Download "minimal adb portable" and extract in the OFP Rom folder (where are the files of ofp rom extracted).
- Via fastboot flash the follow img:
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot flash vbmeta_vendor vbmeta_vendor.img
fastboot flash super super.img
fastboot flash boot boot.img
fastboot flash persist persist.img
fastboot flash recovery recovery.img
- Now start the phone in recovery (will be the stock recovery).
- Wipe and after that flash the ozip file.
- After that format the memory phone (always via stock recovery).
- Reboot and that's all the phone start via with stock rom.
After configuration there are some update with the last ota dated 28/10/2021.
I hope, someone, will find it usefull.
Click to expand...
Click to collapse
help plis ???