Do we need different boot image everytime theres any update or we can update our software normally, as in case of update b45 device got bricked and need orignal boot image for that and matters got complicated.....
i used a rooted realme 6.Yesterday i got update of 3.14 GB.I updated it normally when my phone restart the update process get stuck on loading menu.so i try to install stock rom by official realme recovery but again its stuck.Now i unable to get into recovery and fastboot mod.i think my is break.then i decided to flash stock rom by SP FLASH TOOL but it cant work.Then i prey god and start my phone and it stuck on upadating menu and leave it as it is.after 5 to 6 minute my phone is start normally.so i suggest never update your phone.
waiting for next root patch
akash shaky said:
i used a rooted realme 6.Yesterday i got update of 3.14 GB.I updated it normally when my phone restart the update process get stuck on loading menu.so i try to install stock rom by official realme recovery but again its stuck.Now i unable to get into recovery and fastboot mod.i think my is break.then i decided to flash stock rom by SP FLASH TOOL but it cant work.Then i prey god and start my phone and it stuck on upadating menu and leave it as it is.after 5 to 6 minute my phone is start normally.so i suggest never update your phone.
Click to expand...
Click to collapse
thanks bro same thing happens to me with update b45 so this time i decide to wait for next boot image patch and then update in realme care lol.... they still think that its the software that breaks device but its patched boot image that break them at the time of update
Related
Hi! I've managed to brick my device (d610ar) badly, i think
the device doesn't boot normally (message "Secure booting error! Cause: boot certification verify.", and i am stuck there), can't charge it with the wall charger, and the only thing that works is download mode; but flashing a kdz with LG FlashTool (the way i went back to stock a few times) says flashing and at 2% (or 3% sometimes) it says that doesn't find the device, that i have pull out the battery to reconnect my device again and when i do that it does the same thing on a loop, asking to do it again later..
the funny thing is that it appears on device manager on windows, on com port 11 for example, but the FlashTool doesn't recognize it..
so, i can't flash any kdz and doesn't boot.. i've read around here in xda to enter fastboot to fix it, but.. can this device enter fastboot? i couldn't do it, tried adb too and couldn't make the device visible..
i, before this happened, had multirom installed, rebooted to recovery and deleted secondary roms to install in primary rom cm12.1.. there started to happen strange things when rebooted normally to configure it..
after a while trying to boot found around here in xda too that i could enter twrp recovery via hardware keys to reinstall again, so got into it and installed a flashable zip to come back to stock KitKat directly, that have worked for me before..
after that rebooted and i can't do anything else than download mode..
i kinda figured that the problem must be that multirom injected the boot sector after installing the stock flashable zip, and when i did that restored the stock aboot and abootb (these, modified carefully, allowed us to unlock bootloader and flash recoveries, etc, etc.. ; by the way, many thanks to the devs that discovered it and made the guides!)..
now i have read the instructions for flash via fastboot the stock boot.img and so pass the security verification, but i can't enter it..
so, what do you think that could be the next step? or is it really hard bricked and i should forget about it? i'm really hoping to recover it but i don't know what else to do..
sorry for the bad english, not my primary language
thanks for reading and i am hoping to hear some suggestions!
He is not hard bricked you need to flash stock boot and reunlock bootloader if you have custom recovery still installed, but go first with the eazy way search xda about lg flash tool stuck at 2% there some guides to help you get kdz flashed
Thank you very much!
numpea said:
He is not hard bricked you need to flash stock boot and reunlock bootloader if you have custom recovery still installed, but go first with the eazy way search xda about lg flash tool stuck at 2% there some guides to help you get kdz flashed
Click to expand...
Click to collapse
Thank you very much! You made me realize why wasn't working..
Because of you, i started to search threads related with the "flashtool stuck at 2%" and one of the things to look at was a txt file to see what was the problem.. there i found out that the lg FlashTool recognized my device as LGD618..
That's when i realized that i must've messed up when i flashed a lollipop flashable zip for the D618(a while ago), "converting" my cellphone on that model.. so when i connected on download mode and put the LGD610 kdz the comparison of cellphone model and binary model didn't match..
Solution was to flash LGD618 kdz, boot up normally, install towelroot, install supersu, edit a line on build.prop
from persist.multisim.config=dsds to persist.multisim.config=none
rebooted and that's it.. everything works perfectly now! i won't be doing stuff to it for a while
probably will stay stock like that, because now i will be using an OnePlus One in a few days and the G2 mini will be used by my mother, i think..
Thanks again! You saved my device for being bricked forever
i glad i could helped you :good:
I tried installing kitkat having installed lollipop and did not work, also I tried installing lollipop and nothing. Well I think this update lollipop are adding some kind of lock to disallow downgrade or upgrade by KDZ. I try other methods, unlocking bootloader, and install a aboot.img, bricked my phone. I recommend that you do not attempt to unlock the bootloader and install any system image that is not official, or may end up with a dead device.
I Unlocked the bootloader 3 days ago and flashed Cyanogenmod 12.1 with exact gapps and was able to use the phone perfectly ,today I searched for xposed and found that it could be only installed by manual flashing for android lollipop , so I downloaded the zip file and rebooted my phone in Recovery Mode [ TWRP ] and flashed the zip file just after that the phone stuck at bootloop. Restarted the phone 3 time's but no luck so finally I got into bootloader by pressing the volume down button and the power button and opened recovery mode to factory reset the phone and reflashed the CM 12.1 with gapps , now the problem begin's when I restarted the phone it is stuck at "Warning Bootloader Unlocked" and even the recovery mode is stuck at beginning screen of twrp , Im only able to use the bootloader . Even tried to reflash TWRP Recovery from computer but thier's no change it is still stuck at the recovery screen .
Any help would be really appreciated
try reflashing and then wiping cache's before rebooting ?
like the regular cache and dalvik cache.
also don't expect the first boot to work quick.. leave it for a long time...
good luck.
Actully the problem is , when i try to open recovery mode it stucks at teamwin logo (twrp)
"I searched for xposed and found that it could be only installed by manual flashing for android lollipop"
Click to expand...
Click to collapse
that quote is confusing.. what did you mean exactly.
What TWRP ? From Where + what version # ?
If i were you i would re-download it then MD5 hash it.. verify it !
I always check the md5 hashes on any phone roms or firmware etc.
I have had tons of incomplete downloads and there is nothing wrong with my internet connection either.
The more detailed you can be the more likely someone can help.
Once you are positive your TWRP is downloaded properly if i were you
i would re-flash it with fastboot. (if you can)
Can you power off the phone and put it in bootloader mode then connect to pc ?
power it off then hold volume down + power then plug in USB
then right click the empty space in the windows folder (assuming no Linux)
select open command prompt here then type:
adb devices
Is it listed ?
I also assumed you have "Minimal ADB and Fastboot" installed.
Sounds like you flashed a 5.1 firmware package ?
yes ? which one ?
And watch out many sites have cut off my download on me while downloading them.
and if you then flashed a half completed download you could prob damage the phone.
for checking hashes on windows i use HashSlash.. it's clean / free and has a GUI ..google it
Basically , first I flashed Android 5.1.1 AOSP for my device and then Cyanogenmod 12.1 Nightly Surnia . and yes I tried to reflash TWRP Recovery but it is stuck at the same Teamwin Logo screen , and i flashed the latest version of twrp which was available on xda . Can you provide me worth some kind of image file which I can flash to Factory reset my device from computer or anything else which can help.
And by the way Thanks for the quick reply
sabungolfer0011 said:
Basically , first I flashed Android 5.1.1 AOSP for my device and then Cyanogenmod 12.1 Nightly Surnia . and yes I tried to reflash TWRP Recovery but it is stuck at the same Teamwin Logo screen , and i flashed the latest version of twrp which was available on xda . Can you provide me worth some kind of image file which I can flash to Factory reset my device from computer or anything else which can help.
And by the way Thanks for the quick reply
Click to expand...
Click to collapse
https://mega.nz/#F!rMIhDLgR!oq5Cz_XbgZLEEysmqoYtcA
i used that.. but didn't flash my phone yet.
that is all firmware packages stock for Moto-2015
You still have not mentioned a lot like where did you get TWRP and what version ?
What carrier is your phone ?
I take it you unlocked the bootloader or did you get it like that ?
I'm guessing the bootloader loads TWRP
so either of those is probably damaged i bet.
I would try and get it stock then work from there getting TWRP back on and rooting etc.
What i was trying to ask you is..
Was your phone on 5.02 and you tried to update it to v5.1 ?
Because i have seen other people here who had problems with that.
Relocking the bootloader can cause problems and so can reverting to an old ver from 5.1 to 5.02
I used a custom kernel and TWRP from Squid here on the forum and rooted
and his kernel is only good for me up to version 5 but he has way newer versions out..
but they are only for users who updated to 5.1
So you have to be VERY careful what your doing.
I might have screwed up my phone if i didn't notice the fine print.
Also just search the forum for some guides on flashing firmware
and verify the downloads
My Bootloader is unlocked , TWRP Recovery Version 2.8.6.0 . My phone was on Android 5.0.2 [ Official Non Rooted ] , so I thought of updating it to 5.1.1 which was available as custom rom So I unlocked the bootloader flashed TWRP version 2.8.6.0 by copying Recovery.img in minimal adb folder and oped CMD and flashed the custom recory and it was no problem , then 2 days ago I flashed Cyanogenmod.12.1.Surnia.20150829.zip and it worked fine no issues then I flashed Xposed Modular in recovery mode , now when I tried to restart the system it stuck at bootloop so I entered Bootloader and again restarted 2, 3 times but no luck so I again entered bootloader and entered Recovery Mode ( TWRP 2.8.6.0) and wiped all my data , But unfortunately I was outside so I dint had the firmware and gapps so I switched the phone off in hope that ill flash the firmware and gapps when i reach back home . So when I vame back home and pasted the firmware and gapps in memory card and inserted it baxk in the phone and tried to enter recovery mode , that was the first time when I experied That teamwork logo stuck at recover mode and the further story you laready know
Model:XT1521 Retasia(Indian)
So let's get on with the story
I own a moto e 2 4g variant. I unlocked the bootloader of the device,installed a custom recovery and flashed a custom ROM. Everything went well;I was trying a new ROM almost everyday(5.1.1 and 6.0.1) until one day when I decided to go back to stock ROM.I downloaded the official 6.0 stock ROM,installed it and started the device.The phone booted,went straight to recovery and showed erasing.The problem starts here.It showing eraseing and rebooted after some time and I thought that it's going to boot up into stock 6.0.But I was wrong.The phone booted and again did the same thing and this went on in a loop.So I decided to try it once more.This time I did two more things prior to installing the ROM;
Fastboot erase all
Fastboot erase system - w
Till then in bootloader it showed official in software status.But after those two erase commands it started showing modified.
Even then the result was the same I.e.showing erasing and rebooting.So I thought that I will go back to custom ROM for the time being.all went well,phone booted up but there was no signal.The phone was not accepting any Sims. I went to bootloader and immediately found out the cause.It was showing not found under baseband.So I seperately flashed a modem but to no luck.As of now I have tried all stock rims available(5.0.2,5.1.1,6.0) but the device is not booting up.
Any help will be highly appreciated.
Thanks in advance.
This happened to me with CM13, the same thing happened with the baseband number, and I couldn't even enter in the recovery, so I had to manually flash the Stock ROM via adb. It happened to me again when I tried to root my phone even with the systemless root, the phone just doesn't boot up, I'd recommend you to flash the basebands found in the forums, if that doesn't fix it, you'll have to manually flash the stock rom via adb or you can use the easy tool, it's fairly simple if you follow the steps, I'll leave the links bellow.
Easy tool flasher
Basebands
Filz0r said:
This happened to me with CM13, the same thing happened with the baseband number, and I couldn't even enter in the recovery, so I had to manually flash the Stock ROM via adb. It happened to me again when I tried to root my phone even with the systemless root, the phone just doesn't boot up, I'd recommend you to flash the basebands found in the forums, if that doesn't fix it, you'll have to manually flash the stock rom via adb or you can use the easy tool, it's fairly simple if you follow the steps, I'll leave the links bellow.
Easy tool flasher
Basebands
Click to expand...
Click to collapse
Used the flashing tool.But in every mode of flashing,the bootloader flashing and boot.img flashing is showing some error.But rest all are flashing succesfully.Still in bootloader it is showing baseband not found.And when I boot the device,the bootloader screen comes up,followed by a black screen and the cycle repeats.Any help would be appreciated.
Edit:My moto e 2015 is a LTE RETASIA(Indian) model.In the baseband link you provided,XT1521 RETASIA version's baseband is not available.
Fastboot flash bootloader bootloader. Img
Rename motoboot img
Sent from my MotoG3 using XDA-Developers mobile app
first.act.line said:
Fastboot flash bootloader bootloader. Img
Rename motoboot img
Sent from my MotoG3 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks I will try that.
gauthamkithu said:
Model:XT1521 Retasia(Indian)
So let's get on with the story
I own a moto e 2 4g variant. I unlocked the bootloader of the device,installed a custom recovery and flashed a custom ROM. Everything went well;I was trying a new ROM almost everyday(5.1.1 and 6.0.1) until one day when I decided to go back to stock ROM.I downloaded the official 6.0 stock ROM,installed it and started the device.The phone booted,went straight to recovery and showed erasing.The problem starts here.It showing eraseing and rebooted after some time and I thought that it's going to boot up into stock 6.0.But I was wrong.The phone booted and again did the same thing and this went on in a loop.So I decided to try it once more.This time I did two more things prior to installing the ROM;
Fastboot erase all
Fastboot erase system - w
Till then in bootloader it showed official in software status.But after those two erase commands it started showing modified.
Even then the result was the same I.e.showing erasing and rebooting.So I thought that I will go back to custom ROM for the time being.all went well,phone booted up but there was no signal.The phone was not accepting any Sims. I went to bootloader and immediately found out the cause.It was showing not found under baseband.So I seperately flashed a modem but to no luck.As of now I have tried all stock rims available(5.0.2,5.1.1,6.0) but the device is not booting up.
Any help will be highly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
u have to flash a official rom with propper way and remember u cannot flash old bootloader on the new bootloader it will definatly brick ur phone so if ur bootloader working do not replace it with old one for more info u can go in official rom section of this site and bootloader section.....good luck
vishalgupta.vns said:
u have to flash a official rom with propper way and remember u cannot flash old bootloader on the new bootloader it will definatly brick ur phone so if ur bootloader working do not replace it with old one for more info u can go in official rom section of this site and bootloader section.....good luck
Click to expand...
Click to collapse
Thanks buddy but unfortunately I have tried that.:crying:
OK guys, thread cleaned.
No more flame from anyone please, no more garbage.
OP please provide as much details as possible. Everyone else, you can ignore the OP if you want, but do not come in here just to flame.
Thanks.
This friday I got my tablet(lenovo tab 2 a7-10f). Yesterday I decided to install better rom on it. I rooted my device and installed twrp recovery. Unfortunally I didn't quite realize the importance of making back up and the fact that you can't flash this:
https://forum.xda-developers.com/android/software/rom-orionlp-v1-8-lenovo-tab-2-a7-10f-t3480918
on android 4.4. My device loops "lenovo powered by android" screen. I can boot it into TWRP recovery. I have been googling today for a whole day and I havent find any rom to flash it. I tried this:
https://forum.xda-developers.com/an...-stock-lollipop-5-0-roms-lenovo-tab2-t3418835
and I think thing like this for a KiKat (through twrp, probably that's why it doesnt work) .I couldn't quite boot it into fastboot and I can't use sp flash propely or it just simply doesn't work for me. Please help me to find any rom to flash it from twrp, since I am too stupid to do anything different way.
In short it loops, I can boot it to twrp, I just want to unbrick it. The ultimate goal is to propely install this *first link*
Thanks in advance!
maykapal said:
This friday I got my tablet(lenovo tab 2 a7-10f). Yesterday I decided to install better rom on it. I rooted my device and installed twrp recovery. Unfortunally I didn't quite realize the importance of making back up and the fact that you can't flash this:
https://forum.xda-developers.com/android/software/rom-orionlp-v1-8-lenovo-tab-2-a7-10f-t3480918
on android 4.4. My device loops "lenovo powered by android" screen. I can boot it into TWRP recovery. I have been googling today for a whole day and I havent find any rom to flash it. I tried this:
https://forum.xda-developers.com/an...-stock-lollipop-5-0-roms-lenovo-tab2-t3418835
and I think thing like this for a KiKat (through twrp, probably that's why it doesnt work) .I couldn't quite boot it into fastboot and I can't use sp flash propely or it just simply doesn't work for me. Please help me to find any rom to flash it from twrp, since I am too stupid to do anything different way.
In short it loops, I can boot it to twrp, I just want to unbrick it. The ultimate goal is to propely install this *first link*
Thanks in advance!
Click to expand...
Click to collapse
There is a way to flash a now rom with SP flash tool although you can't use sp flash tool propely.
You must open the lid of the tablet and unplugin the battery
(to unpluin the battery simply pull out this)
Then open your SP flash tool, load the scatter file of the rom, press download button, plugin the battery and your pc will start dowloading the rom normally.
Hi experts!
Is there an available factory image of the latest firmware for griffin xt1650-03 for download? I unlocked my boot loader and tried to flash custom firmware now I am stuck in boot loop. My phone was nougat and updated via OTA last week before I decided to unlock boot loader. I tried loading the latest image I got from firmware.center but I am getting Downgrade version and verification failed when flashing stock partition and not loader. Please help
Note: I did this my wifi became unusable after my last OTA (mac 02:00:00:00) and thought using custom firmware would help
And I did not make a back up
Get it in fastboot mode, flash TWRP and root it. That might work.
I am in exactly the same position as OP, although I have successfully installed TWRP and have open bootloader from which I can boot into TWRP no probs. I didnt do a backup (will never again make this error!!)
The problem arises when I try to flash (any) files over to device I get the "Downgrade version and verification failed" like OP when flashing stock Telus rom (telus phone) or any other rom/files.
Rebooting brings me back to the moto unlocked bootloader page (horrible!) and the only way out is to get key combo or fastboot into bootloader/recovery etc.
Tried flashing multiple images as whole or bit by bit, always get the same bad validation message. Finding it hard to believe this 700dollar phone is a brick after literally following MotoS own 'unlock your bootloader' instructions. Never had issues like this on OPO, S6, S7, LG etc.
PC shows android device connected, nothing in the two empty folders that appear. TWRP confirms I have no OS installed and throws me back to bootloader.Wondering if locking bootloader again will allow me to install 'stock' ROM or at least recovery? I have reached my android knowledge limit and am not sure where to go from here, any help much appreciated!
OK. This happened to me. The way that I solved it was by flashing the RETUS NPL86.25.15 and then flashing the OTA 25.17-3-3 through twrp. Although I think I could've saved the headache if the original instructions included flashing the OEM.bin but anyways. That's what I did. Hope it helps.
Thanks. I did try flashing the oem.bin but got partition name error.
Can you link to the files you mention I think it's a kernel and then an OTA image? Thanks again in advance.
What I mean is that when I first started flashing the RETUS rom the instructions skipped that part so I ended up flashing most of the file system without something so it would never boot but it wouldn't loop it'd just hang. So basically you flash everything and then include the OEM.bin after you do the system chunks