I' ve just recently bought redmi note 9 pro. My amazfit watch is t-rex. Since then every time my t-rex disconnect with zepp, in order to connect it, I have to enable gps on redmi note 9. The message that appears is as the screenshot
Hi! Same here, with a Poco F1 and a Stratos 3. Sometimes that is the only way to reconnect both! But after the connection is set I usually turn off location and it keeps working.
farrayoles said:
Hi! Same here, with a Poco F1 and a Stratos 3. Sometimes that is the only way to reconnect both! But after the connection is set I usually turn off location and it keeps working.
Click to expand...
Click to collapse
The same happens to me. But it is annoying.
Related
I have an Amazfit Bip clock and it has blocked in "Activity" page.
The touch screen does not respond, the physical side button either, the Mi Fit fails to connect, ...
The clock continuously displays that "Activity" menu screen and you can not interact with it.
How can I reset it or what should I do to use the watch?
I use Mi Fit 3.0.5, FW-0.9.14
Thanks
montarelonf said:
I have an Amazfit Bip clock and it has blocked in "Activity" page.
The touch screen does not respond, the physical side button either, the Mi Fit fails to connect, ...
The clock continuously displays that "Activity" menu screen and you can not interact with it.
How can I reset it or what should I do to use the watch?
I use Mi Fit 3.0.5, FW-0.9.14
Thanks
Click to expand...
Click to collapse
Yes, it happens when BIP trying updating A-GPS data. Run MiFit, keep watch close phone and let him update. Sometimes is failed, but close MiFit, clear memory and try again until success.
Thanks a lot.
In fact, it must be something related to what you say, becasuse as soon as the clock was recovered and connected again to the Mi Fit, it began to update the A-GPS.
What I do not know is if the solution you proposed works, because while it was blocked, the Mi Fit did not recognize it (it always put Connecting ...), it did not connect and I mismatched it and then I could not find it to link it again. That is, there was no bluetooth connection between My Fit and Clock, so I do not know how I could have updated the A-GPS clock trough the Mi Fit
Fortunately, the clock went off and when I put it to charge it started well and it works.
Hi there,
since today i have got the same problem. Sadly the battery is charged 100% so waiting for discharge may take some time. Does somebody know how to reset or force reboot or force discharge the watch?
Thanks in advance!
Amazfit bip problem
Hi, i got exactly the same problem with you..
After i switched my smartphone (from huawei P9 to LG V20) My amazfit Bip suddenly updating A GPS and after that, the touch display is hardly responding, then when i long press the button, it start to displays workout session that cannot be stopped or interrupted in the meantime, Mi Fit can not sync/interract during workout session).
After spent several frustating days, finally i conclude that the main issue is the firmware.
So here is what i did :
- Let the Amazfit watch battery drain (since the activity/workout session can not be stopped, it will drain faster than ussual).
- Recharge the watch until more than 10% and re-connect it to Mi Fit app. (Don't charge it too long, because when something goes wrong you will have to take time to drain the battery again).
- Download NOTIFY & FITNESS FOR AMAZFIT" app from google playstore and connect your Amazfit with the app.
- When the Amazfit Bip paired to Notify & Fitness For Amazfit,
unpaired the watch from the Mi Fit App, then uninstall Mi Fit from your phone.
- Now you have only 'Notify & Fitness for Amazfit' app connected to your amazfit bip.
.- Go to setting section in the app, scroll down and you will find firmware update section, then update the amazfit firmware (you will find some option : english/spain/italian etc., i've choosen english version)
- There imare 3 items that you have to sequintly update one by one : firmware, recources and gps (i failed to update the gps, but all i know, it doesn't matter anyway...)
- After the update finished (sometimes it failed, but i repeat it on and on untill it's succeed), my amazfit starts to work proper and not displaying work out session anymore.
Notify & Fitness for Amazfit is my saviour!
It works better than the official Mi Fit app.
Blocked after Workout
I also had a blocked Amazfit Bip:
On my first workout (a 3 hour bicyle ride), I wanted to stop it. Unfortunately the watch always restarted the workout again.
First I thought that I had double tapped the screen after pressing the Ok (to finish) button. But I tried this for at least 30 times. It always restartet the workout.
I still got a connection from the Mi Fit App, but it told me that the watch is within a workout.
I disconnected / reconnected the MiFit App several times and somehow I was able to quit the Workout.
I immediately switched off the watch, restarted and everything was fine again. No new firmware flashing was required.
I only have it since two days.
[Firmware 0.1.0.26]
Hai
My amazfit gtr disconnects from the phone every night and in the morning I have to restart both phone and watch more than once for them to reconnect.
I've noticed that when I charge the phone overnight watch won't disconnect.
I've turned off battery optimization on the app but still the same problem
Anyone has a solutio. For it not to disconnect every night or at least an easy way to reconnect at the morning.
Hello, I have GTR 47 and one+ 7t too and no problems with BT disconnect. Maybe it helps to connect GTR and 7t not only in the Amazfit App but in the Bluetooth settings too (add new device). And add the GTR as trusted device in trusted agents to keep phone unlocked.
I've been using an Amazfit Bip together with the Mi Fit app for a long time without any problems. The Bip hardly ever lost connection to the phone. Then I bought an Amazfit Bip S and as the Mi Fit app does not support it, I had to use the Amazfit app. I recognized that the Bip S permanently lost bluetooth connection to the phone, no matter what settings I changed. So I thought it would be a problem of the Bip S and bought a normal Bip again. But same problem... if the phone does not lie directly on the table, most of the time Bip has no bluetooth connection. Even if the phone is in its case on my belt, the Bip loses connection.
So it must have something to do with the Amazfit app, I guess. Somewhere I read that if you uninstall and reinstall it, Bluetooth connection problems may be gone. But if I uninstall the app, I lose all data, so before I do that I try to investigate what could be the problem.
The phone is a Blackview BV9700 Pro. I already cleared all data and cache of the Bluetooth app. I restarted the phone. I turned Bluetooth off and on again. I turned the option for a permanent notification in the Amazfit app on and off, makes no difference.
Can anyone confirm that the Amazfit app has a bad Bluetooth connection compared to the Mi Fit app? Could the problem be caused because both apps were installed at the same time at the beginning? I had Mi Fit installed, installed Amazfit and because the Bip was recognized by both apps I uninstalled Mi Fit and kept only Amazfit.
In case my english sounds strange from time to time: I'm from Germany
Homer J. S. said:
I've been using an Amazfit Bip together with the Mi Fit app for a long time without any problems. The Bip hardly ever lost connection to the phone. Then I bought an Amazfit Bip S and as the Mi Fit app does not support it, I had to use the Amazfit app. I recognized that the Bip S permanently lost bluetooth connection to the phone, no matter what settings I changed. So I thought it would be a problem of the Bip S and bought a normal Bip again. But same problem... if the phone does not lie directly on the table, most of the time Bip has no bluetooth connection. Even if the phone is in its case on my belt, the Bip loses connection.
So it must have something to do with the Amazfit app, I guess. Somewhere I read that if you uninstall and reinstall it, Bluetooth connection problems may be gone. But if I uninstall the app, I lose all data, so before I do that I try to investigate what could be the problem.
The phone is a Blackview BV9700 Pro. I already cleared all data and cache of the Bluetooth app. I restarted the phone. I turned Bluetooth off and on again. I turned the option for a permanent notification in the Amazfit app on and off, makes no difference.
Can anyone confirm that the Amazfit app has a bad Bluetooth connection compared to the Mi Fit app? Could the problem be caused because both apps were installed at the same time at the beginning? I had Mi Fit installed, installed Amazfit and because the Bip was recognized by both apps I uninstalled Mi Fit and kept only Amazfit.
In case my english sounds strange from time to time: I'm from Germany
Click to expand...
Click to collapse
Hello,
Few things:
- I would recommend you to use only one App, AmazFit or MiFit at a time. I guess AMazFit is preferable depending on the watch you have. Unpair from one app and uninstall the app you don't want to use
- if you uninstall and reinstall the Amazfit or MiFit app with same credentials, Mi account or with mail/phone number, you should recover your data saved and you won't loose all your history. Maybe the one from the current day, I think. I jumped from MiFit to Amzfit with same account with no problem, recovering data for many years
- concerning the bluetooth, not sure what OS your are using, iOS or Android. You could check in the Amazfit or Mi Fit app properties if the OS is not using "battery saver" functions. Sometimes, by default, the battery saving is in "restricted mode" which can affect connections like wifi/bluetooth to save power. Try to see if you have this battery saving function ON and set to "no restrictions" - at least this is what I do on my Android phone.
Tzar92 said:
Hello,
Few things:
- I would recommend you to use only one App, AmazFit or MiFit at a time. I guess AMazFit is preferable depending on the watch you have. Unpair from one app and uninstall the app you don't want to use
Click to expand...
Click to collapse
Yeah - as I wrote I uninstalled Mi Fit and only use Amazfit now.
- if you uninstall and reinstall the Amazfit or MiFit app with same credentials, Mi account or with mail/phone number, you should recover your data saved and you won't loose all your history. Maybe the one from the current day, I think. I jumped from MiFit to Amzfit with same account with no problem, recovering data for many years
Click to expand...
Click to collapse
Hm, now as you said it... the Amazfit app also loaded the data from the Mi account.
- concerning the bluetooth, not sure what OS your are using, iOS or Android. You could check in the Amazfit or Mi Fit app properties if the OS is not using "battery saver" functions. Sometimes, by default, the battery saving is in "restricted mode" which can affect connections like wifi/bluetooth to save power. Try to see if you have this battery saving function ON and set to "no restrictions" - at least this is what I do on my Android phone.
Click to expand...
Click to collapse
The phone uses Android 9. The Amazfit app is not restricted by any battery saving modes as I put it on "Not optimized" just like the Mi Fit app before.
Hello everybody!
I recently bought an Amazfit Stratos 3 to replace my amazing Stratos 2, since it's battery died after 2 years. And although my almost immediate regret (the 2 was pretty much indestructible, the 3 already has marks with just one week), there is a annoying connection issue: every so often it simply disconnects from my Poco F1! My phone is also not on stock ROM but it was only when it arrived, so I'm excluding that as an possible cause. I've had that issue on the latest stock ROM and also on the Paceficator ROM from Saratoga. It gets me mad since what is the use on a smartwatch that, randomly, disconnects from my phone? Any other Stratos 3 users with this issue? Or is just mine and should I get it to warranty? Just for reference, with the Stratos 2 it was almost shocking how far I could get from the phone without losing connection, let alone being near to it and with the Stratos 3 I find myself with my phone on my pocket and with the smartwatch disconnected!
Thank you all for your help!
Try to configure zepp to not going to sleep
winni21 said:
Try to configure zepp to not going to sleep
Click to expand...
Click to collapse
I'm sorry, I'm not getting what you want to say.
Hello,
I notice almost the same. There is of course the option on the watch to get notified when it disconnects from the phone but I also see that "find phone feature" is not working good anymore. Sometimes, I'm in line on sight at 2-3m from the phone, and the "find phone" option is not successfull. Watch is saying "Not connected to App, unable to find phone". So definietly, the watch is loosing the connection with the phone/Zepp app.
To answer Winni21, Zepp is in "no restriction" in battery saving. Is this what you mean by "configure Zepp not to go to sleep"? It is true that if Zeep goes to sleep, "find phone" and bluetooth migh disconnect quickly. Please, clarify what you mean "not going to sleep" if possible
Tzar92 said:
Hello,
I notice almost the same. There is of course the option on the watch to get notified when it disconnects from the phone but I also see that "find phone feature" is not working good anymore. Sometimes, I'm in line on sight at 2-3m from the phone, and the "find phone" option is not successfull. Watch is saying "Not connected to App, unable to find phone". So definietly, the watch is loosing the connection with the phone/Zepp app.
To answer Winni21, Zepp is in "no restriction" in battery saving. Is this what you mean by "configure Zepp not to go to sleep"? It is true that if Zeep goes to sleep, "find phone" and bluetooth migh disconnect quickly. Please, clarify what you mean "not going to sleep" if possible
Click to expand...
Click to collapse
Hi! I've used both options on Zepp's battery options, with no sucess. But I do notice that if I turn on location with the GPS the connection is almost instant! But I'm not willing to have location on all the time...
I have started getting the same connection issues. I didn't have this problem before or at least I didn't notice. Enabling the anti-lost phone feature reveals the watch is constantly loosing connection.
In my case I noticed the problem via the notifications (started to come with a delay and very often repeated) Seems like when the watch looses connection (or when it reconnects) old notifications are displayed.
I' ve just recently bought redmi note 9 pro. My amazfit watch is t-rex. Since then every time I turn on my redmi , I have to enable gps, in order to connect the t-rex with zepp app, otherwise it doesn't connect. The message that appears is in the screenshot
Same with Amazfit Bip
Had same issue with my Amazfit Bip initially when the app was released. After about a dozen connects it now allows me to sync with bluetooth only however the initial sync only loads steps counts, I have to close app fully and reload to get it to sync any sleep data.
Weird!
I simply uninstalled the app. It has become pretty useless.
DarthJabba9 said:
I simply uninstalled the app. It has become pretty useless.
Click to expand...
Click to collapse
But if I do this I wont be able to connect my t-rex with the phone any more.
SACS73 said:
But if I do this I wont be able to connect my t-rex with the phone any more.
Click to expand...
Click to collapse
True. For me, it was nothing lost, because nothing I did (other than uninstalling it and then installing it again - every time) would make it connect. It was working perfectly fine before it became zepp.