my phone died after i accidentally removed battery while it was still on. now after plugging it in charger or pc i get red blinking light. no screen no fastboost etc. ib pc i was getting qhs usb so i installed qualcomm drivers. then i got qdloader 9008( is this edl mode?).
so i tried flashing rom using qfil because miflash doesnt work on my pc. i keep getting sahara error like "unable to read. O bytes etc"
i tried many fixes but it doesnt work. is this phone problem?
also how did my phone automatically got into edl mode? it was on miui 7.x stock everything no mi account.
should i try pin method to put it into "real" edl mode?
also if i am getting qdloader 9008 my mobo isnt dead right?
Related
I have a bricked LG v10 in Qualcomm 9008 mode. The only thing that appears on the PC is the qualcomm 9008 device in device manager. No lights on phone, nothing. I tried using Qfil to flash the phone, but i keep getting an error: 'device took 10.000 seconds to respond which is more than 3.000, this indicates your target is unstable. '
i am wondering if anybody knows what may be causing this. I bought this phone in craigslist for $25 and the owner said that it just died on him but he didnt know what was wrong. The phone is mint condition it just doesnt show any sign of life besides the recognition of it by the computer as Qualcomm HS-USB QDloader 9008
AlexCano said:
I have a bricked LG v10 in Qualcomm 9008 mode. The only thing that appears on the PC is the qualcomm 9008 device in device manager. No lights on phone, nothing. I tried using Qfil to flash the phone, but i keep getting an error: 'device took 10.000 seconds to respond which is more than 3.000, this indicates your target is unstable. '
i am wondering if anybody knows what may be causing this. I bought this phone in craigslist for $25 and the owner said that it just died on him but he didnt know what was wrong. The phone is mint condition it just doesnt show any sign of life besides the recognition of it by the computer as Qualcomm HS-USB QDloader 9008
Click to expand...
Click to collapse
May be the phone remains in the 9008 mode for a short period of time. Try by loading files in the software beforehand so that u just have to press the download button as soon as the device is detected in 9008 mode.
Secondly kindly share qfil recovery files for v10 h901 model. Let me also try this by shortening the pins to boot phone in 9008 mode.
hi
i have a Redmi 3 (Ido) and it's stuck in EDL mode. At the beginning I thought he was power off but nothing happens with buttons, until i connected to pc usb and shows as Qualcomm HS-USB QDLoader 9008 (com4) port.
I tried everything but the problem remains. No power off/on, no restart, no fastboot, no recovery. I can't flash it with miflash, i recieved error "ping target with firehose, ping target fail". I tried with qpst configurator and shows my phone on download mode and i can't do nothing. It's a hardware problem?
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
https://www.google.com/amp/s/forum....-fix-totally-dead-redmi-note-4-t3746465/page1
Hope it helps you
Sent from my mido using XDA Labs
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
1. Remove the back panel then the battery connector. Keep it in that way for a while like a minute
2. Then short either the 'most effective points' or 'less effective points' following this thread . While keeping them short, connect the USB cable to the Computer, it will enter into 'download' mode suitable for miFlash/QFIL
Red lights blinking when plugged in, shows up as "Qualcomm HS-USB Diagnostics 900E"
Hi,
my Redmi Note 3 (Snapdragon) suddenly stopped working and won't turn on again.
It is from Gearbest and had probably a shop rom installed. I didn't flash any ROM or didn't root it but i checked the "OEM unlock" option in developer options. After that it was bricked (?).
Fastboot doesn't work, it won't turn on (nothing on the screen) and it is recognized in Windows as "Qualcomm HS-USB Diagnostics 900E" when plugged to the pc. Also the LED blinks constantly in red.
Is this already EDL mode?
I tried to use Mi Flash and it didn't recognize the phone. After manually installing "Qualcomm HS-USB QDLoader 9008" in the device manager Mi flash detects it.
When i try to flash a fastboot rom i get the error "sahara read end error with status: 9".
Also tried to open it and short circuit the testpoint pins. In this moment the device is regognized again but nothing changes and it's exactly like described before.
Is the phone dead or can i try anything else?
Thanks
I can't say fire sure but it seems like a hardware problem and that most likely means that it's dead.
You also posted this in the wrong section. This should be in Q&A/Help section. Not in development.
Try charging it for a while. This also happens when the battery reaches an ultra low power state.
If doesn't work, Boot into edl using test point method and flash fastboot rom.
Try this, it worked for me.
First this one
xiaomitips.com/guide/how-to-unbrick-redmi-note-3-snapdragon-best-solution/
If it doesn't work then try this one.
en.miui.com/thread-245347-1-1.html
Hi Everyone,
I have a 4 year old Nokia 7.1 that was working fine a week ago with Android 10.
I accidentally let the battery drain out, phone would not turn on - no Android, no download mode, nothing on the screen however I turn it on - power/volume up/down, etc
I have replaced the battery with a brand new one (very carefully).
New to Android flashing but...
On attaching to PC I get HS-USB Diagnostics 9008 device. I have QFIL, QPST, firmware, firehose programmer for SDM636, etc.
I have shorted pins 3,4 internally, rebooted phone, battery in, battery out. Whatever I do it won't enter EDL mode to try reflashing.
QFIL always says - Switch to EDL Fail Failed to Switch to Emergency Download Mode.
Tried Linux with sahara, etc and phone is visable, but again no respose - can't enter EDL mode.
I have a feeling the hardware may be fried anyway
Am I doing something wrong? Any ideas? Do HMD block EDL?
I think its a lost cause...
Thanks.