Evening all!
I managed to brick an Ulefone S10 Pro by trying to flash a rom onto it which ended in a brief error message and then the screen went black.
Since then, it wont boot up. There is just a black screen and it vibrates briefly as if it's starting up but then nothing, before repeating ad infinitum.
When I connect it to a computer, the computer makes the connection sound, then a few seconds later, the disconnection sound. Nothing is shown on the phone nor the PC at this time.
I have no clue what to do as it doesnt stay connected to the computer long enough to be recognised before disconnecting and nothing appears on the phone screen. Ive tried disconnecting the battery and connecting to the computer without it but the same thing happens
Haylp! :laugh:
Thanks
Why not simply contact Techbone? https://www.techbone.net/ask-a-question
jwoegerbauer said:
Why not simply contact Techbone?
Click to expand...
Click to collapse
Because I simply didn't know about them...
...but now i do...ta!
no joy there, site continually redirects.
Anyone else got any ideas?
Related
i was rooting to get the gingerbread 2.3 rom but forgot to disable the voodoo thing. and now its just frozen blinking on the startup Vibrant Samsung screen! im trying to use Odin to flash it but my computer doesnt seem to be reading it, i held down the volume buttons and its now in the downloading screen but nothing is happening. someone please help me!!!
Try placing all the files on odin before you hook up the vibrant to the computer in download mode. It should work.
Also you are not bricked if you can get into download mode.
i cant do anything on the odin, the phone doesnt connect. its like my computer isnt reading it at all. the odin is clear from anything, its blank. all the screen does when it says downloading is just stay on that screen on the phone. =(
srtrod said:
i cant do anything on the odin, the phone doesnt connect. its like my computer isnt reading it at all. the odin is clear from anything, its blank. all the screen does when it says downloading is just stay on that screen on the phone. =(
Click to expand...
Click to collapse
What I might try to do first is take a step back into familiar territory. First listen for the familiar connection sound just by having your phone on. Do a checklist. Do you have the correct samsung drivers so your computer will recognize your phone in the first place? If you do, then try opening odin, putting your phone into download mode, and seeing if you get that familiar connection sound. Sometimes, you just need to unplug the phone and plug it back in. Once you see the yellow com port light up with a number, you should be good to go. If none of that seems to work, no matter how hard you try, try little variations like taking your sim and sd card out, and just putting the battery in, etc. Sometimes is the dumbest things that work, and sometimes you don't even realize you're skipping a step. I do it all the time. If you can get odin to recognize the yellow com #, you should be in business. At that point you would just need to flash the stock rom.
You might be having the issue because Axura and Bionix roms don't play nicely together, especially if you go from the former to the later. You'll run into gremlins like your market issue. You can always try a factory reset for kicks and see if maybe it's something that simple without having to go through all of this. Good luck!
ok i just tried all that, NOTHING works! i know the sound it makes when u connect to the pc but it did nothing. when i hold the power button and the volume it shows a battery that looks drained. i left it to charge for about an hour and still shows the grey battery across the screen. what kind of samsung drivers do i need i already tried downloading a couple but they just lead to some computer scan crap and wana charge me. im kinda new to this so i need as much help as i can get. thanks.
Hello everyone.I tried to update my phone at 2.3 using LG Mobile Support Tool.Some of my friends recommended me this way,because they tried and it was ok.Anyway,i connected phone to program and started update.At 4% i heard a beep,like the usb cable disconnected and immediately another beep like usb connected again.A yellow screen appear on the phone and it was written:"Emergency mode".Then the update continued.At 55% i heard a beep again like phone disconnected from usb.Then it has started to install some drivers,and another beep like phone connected again and the update process continued,but on the screen appeared a charged battery,like normal charging when phone is closed.After this the update process continued again until 100% and it said complete.I removed the usb and press turn on button.It has showed me LG LOGO and the that write"android" which keeps lighting from side to side.And there my phone is stuck.I removed battery and started again,no luck.What should i do?
Ps*Before this my phone had devoid final installed.Few peoples who updated their phone this way told me that's not a problem,and i am sure that they updated with success.
Home + Volume Down + Power
Omg you're a life saver ^^ Thank you a lot
doktornotor said:
Home + Volume Down + Power
Click to expand...
Click to collapse
Ahahahah!
Yeah, LOL. Don't know what is with that but it seems to be mostly required after using KDZ or similar tool. One would assume it is pointless since the phone has just been wiped clean.
Shrug.
Hi all,
I tried to update using the LG update tool, and got this other issue:
got to the yellow screen (emergency mode) and the application stuck. Then it asked me to remove the battery and put it back in, and press "retry". Obviously, it didn't work, and the phone is stuck on the "LG" bootup screen.
Tried home+vol_down+power, and it doesn't work, the only combination that works is back+vol_up+power, bringing the emergency mode back up, but sadly I closed the updater from the PC.
What can I do here?
hi! i have found similar threads, but they did not help me solve the problem, so here i am, writing a new one sorry guys. also sorry for my bad english, it is not my primary language..
i have an htc desire X which has a damage only on the outside display, the touch screen worked perfectly. then, all of the sudden the phone kept restarting, freezing for few seconds on the HTC welcome screen, then turning off again. it did that for about few hours then died completely, battery wouldn't charge either. on charge, red light on, no sign of life.
i have bought a new battery, and the phone turned on and did the same again, restarting every few seconds. i have pushed the low volume button + start combination, to have it go to the bootloader menu. since then it is frozen on that menu, stuck there. no buttons would work. they do work to get to the menu, but on bootloader not anymore.
i am a newbie, i dont know what to do, except for the fact that i have all contacts still in the internal storage and i was hoping to save them to an external disk/pc/microsd.
when i restarted the phone, the sim and the microsd were already out.
connecting the usb cable to the pc doesnt bring me anywhere either, my pc says "device not recognized" then it doesnt see any device.
please help me to get my data out somehow:crying:
little update:
this morning the "smart"-phone is not stuck anymore, i was able to get to the bootloader and select recovery, BUT unfortunately any attempt to push the on button to confirm it went wrong, phone keeps just restarting or freezes again on HTC welcome screen. any idea?
hello, good day android wizards, a noobie here and i decided to post here because i cant find any similar device and its symptoms. i am using myphone agua rio fun jellybean version and i rooted it but yesterday i deleted the backup file thanks to my hidden moronic abilities now i am seriously regretting it i keep pressing the power button until the bone on my thumb dislocates and nothing shows. i also tried to press powerbutton+volumeup+volumedown a message shows recovery mode and factory mode and when i choose any of those 2 options the device will shut down for no reason. and when it is connected to laptop it will show the battery screen for about 18 secs and disappears and after 10 secs the myphone logo appears, its like they are alternating everytime and on my laptop i will hear a notification sound that the usb is inserted when the screen lights up and another notification sound for removed usb when the screen turns off even it is plugged in to my laptop for a long time again and again and again. i tried to format the sd card hoping something might happen but nothing changed.
can someone help me fix this problem or does someone has the same problem with mine? i am kindly sincerely asking for any help to solve this. please lend me your wisdom
I was searching for a solution for my contact sync issue and I needed to reboot. After pressing reboot, the screen goes blank and I cannot boot again. Volume up + power doesn't work. Plug in power and the light didn't turn on. Even try to hit the tiny hole that looks like reset and that didn't work with. Help!
I am on official miui 9 with Google installer
Did you hold the power button for a longer time?
Yes, try holding the power button for some time. One time, after fastboot, it took around 90 seconds to power up.
there's a tiny hole that looks like a reset ????
did you poke the mic hole?
rioru said:
Yes, try holding the power button for some time. One time, after fastboot, it took around 90 seconds to power up.
Click to expand...
Click to collapse
Hi Rioru, did you ever find a solution to your issue. After charging last night, suddenly I had exactly the same error. Which means I cannot boot the tablet, Power+Volume UP does not respond, charging LED not responding and after connecting to a PC I cannot not establish an ADB connection.
Thanks!
mailis said:
Hi Rioru, did you ever find a solution to your issue. After charging last night, suddenly I had exactly the same error. Which means I cannot boot the tablet, Power+Volume UP does not respond, charging LED not responding and after connecting to a PC I cannot not establish an ADB connection.
Thanks!
Click to expand...
Click to collapse
Hi, I think you're quoting the wrong person here. It's not me, it's spx2000 had this problem.
I have two...1st mi pad 4 flashed many ROMs looking....2nd mi pad 4 on first flash device will no longer boot. PC with miflash starts flash but errors on com port. I have tried cables and different ports. Need help . Black screen
Tablet is seen in win as Qualcomm....miflash sees device as I try different USB ....flash always errors unable to read comm port xxx. Not sure what to try next.
Same issue here, MiPad4LTE. Mine just died while playing mobile legends. Power wont turn on. Even when charger is plugged, LED won't light.