Related
My Galaxy Tab 10.1 with Android 3.2 is stuck on the Samsung Galaxy Tab screen. I figured if I try to change/update the firmware I might be able to get past it. I tried so many different things to fix this using Odin. I found an article with these steps:
Firmware Update Steps:
Run Samsung P7510 Downloader.
Check these options: Re-Partition, Auto Reboot, F.Reset Time.
Click PIT button and select: android_fastboot_emmc_full_p4_16G_32G.pit
Put the Tablet into dwonload mode: ( Press Volume Down + Power for 10 sec ) then press Volume Up to enter Dwonload mode.
Connect USB cable to phone and PC.
Make sure that the program has detect the phone.
Click Start button to flash PIT file and wait to see PASS! word on the program.
Now click on Reset button and uncheck this option: Re-Partition.
Click BOOTLOADER button and select: BOOTLOADER_P7510xxxxx_CL317542.tar.md5
Click PDA button and select: CODE_P7510xxxxx_CL317542_REV00_user_low_ship.tar.md5
Click CSC button and select: CSC_P7510Oxxxxx.tar.md5
Remove battery off and reinsert it then put the phone into download mode again.
Connect USB cable to phone and PC.
Make sure that the program has detect the phone.
Click Start button to and wait to see PASS! word on the program.
After phone rebooted do full reset by this code: *2767*3855#
My dilema, where do I get the necessary files. I searched and all I keep getting are more links with the same instructions and file names. If I can fix the issue without doing the update, that would be awesome. I messed up when I tried to put a ROM with ICS on it, this one (AOKP_ICSROM/aokp_p4wifi_milestone).....Please help.
When you get stuck at that screen all you need to do is boot into recovery, wipe data/cache/dalvik then reflash the rom. Just happened to me with an ICS rom too.
Sent from my GT-P7510 using xda premium
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
If you still have a good image on your tablet you can indeed boot into recovery and reinstall that one:
- hold left volume button down while booting
- Now you should enter a menu, left for flashmenu, right for odin download mode
- press left volume button to select flash menu
- press right volume button to select
- wipe data/factory reset
- install zip from sdcard
If you do not have a correct firmware file on your device download it here:
samsung-updates.com/gt-p7500-galaxy-tab-10-1/
(you can find which one you need here:
androidromupdate.com/2012/02/17/samsung-galaxy-tab-10-1-3g-p7500-firmware-updates-kies-official-releases-list/ )
now follow this guide:
forum.xda-developers.com/showthread.php?t=911228
suc6
Bootloader, pda,csc
From Where do i download the files....
Click BOOTLOADER button and select: BOOTLOADER_P7510xxxxx_CL317542.tar.md5
Click PDA button and select: CODE_P7510xxxxx_CL317542_REV00_user_low_ship.tar.md5
Click CSC button and select: CSC_P7510Oxxxxx.tar.md5
jugalkalyani said:
From Where do i download the files....
Click BOOTLOADER button and select: BOOTLOADER_P7510xxxxx_CL317542.tar.md5
Click PDA button and select: CODE_P7510xxxxx_CL317542_REV00_user_low_ship.tar.md5
Click CSC button and select: CSC_P7510Oxxxxx.tar.md5
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1651794 see what you can find there
I download this stock rom from this thread http://forum.xda-developers.com/showthread.php?t=1651794&page=2
Plz guide me how i flash this rom on my Galaxy Tab 10.1 Wifi P7510
There is only one file in the zip file with this name (P7510XEUKL2_P7510XXKL2_HOME.tar.md5) I select the PDA and push the start button, but very little progress bar shown on my tab then stopped, and not increase the progress for 1 hour. and the last message in the odin message box is "image.cache" then i reboot the tab and error comes "error occurred during boot" then i again start the tab by pressing the volume down + power button then it comes on the selection page for downloading mode and recovery mode. then i go to recovery and recover my backup.
now tell me which option I select, I mean, PDA, Bootloader, Phone or CSC.
yasirshafiq said:
I download this stock rom from this thread http://forum.xda-developers.com/showthread.php?t=1651794&page=2
Plz guide me how i flash this rom on my Galaxy Tab 10.1 Wifi P7510
There is only one file in the zip file with this name (P7510XEUKL2_P7510XXKL2_HOME.tar.md5) I select the PDA and push the start button, but very little progress bar shown on my tab then stopped, and not increase the progress for 1 hour. and the last message in the odin message box is "image.cache" then i reboot the tab and error comes "error occurred during boot" then i again start the tab by pressing the volume down + power button then it comes on the selection page for downloading mode and recovery mode. then i go to recovery and recover my backup.
now tell me which option I select, I mean, PDA, Bootloader, Phone or CSC.
Click to expand...
Click to collapse
Installation Guide
1) Make sure you have the drivers installed
2) Extract ur firmware it to get its content which would be a .tar
3) Download Odin3 v1.85. Then, extract it to get these two required files – Odin3 v1.85.exe and Odin3.ini. Do NOT delete the .ini file since it’s required too. When asked in step 6 below, open Odin by double clicking on the Odin3 v1.85.exe file.
4) Disconnect your tablet if it’s connected to PC. Power it off. Wait 5-6 seconds for vibration to confirm complete switch off.
5) Now, put the Galaxy Tab 10.1 tablet in Download Mode (also called Odin mode) — press and hold, until Samsung Galaxy logo appears — these keys together: Volume_DOWN + Power.
6) Wait till you a screen with options to boot into recovery or download (odin) mode.
7) Press Volume Up key to boot into download mode.
8) Open Odin (from step 3) — Odin3 v1.85.exe. Admin privileges would be required!
9) Connect your Galaxy tab 10.1 tablet to PC now. You should get the message “Added! !” under the Odin’s message box in the bottom left. And you should also see COM port with a number in Yellow. If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve the right drivers installed!
10) Select these files in Odin at respective tabs.
11) Click the PDA Tab, and select the big .tar file “P7510XEUKL2_P7510XXKL2_HOME.tar.md5″
Important! Make sure these 2 check-boxes are selected: Auto Reboot and F. Reset Time. Also, leave the Re-Partition check-box clear (blank), as we are only using a .tar file or PDA file to flash.
12) Double check everything said in step 11.
13) Now, hit the START button to begin the flashing process. When it finishes, your tablet will automatically reboot — and you can unplug the cable when Galaxy logo appears. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. If it’s red and with FAIL written over it, the process flashing process wasn’t successful, Try again, and take care to complete the whole process without any break whatsoever.
Hit Like If it helps..
How do you get the drivers that work when the Tab is booted to ODIN? I've tried everything I can find and have been unable to get the correct drivers installed.
akhil17kr said:
Installation Guide
1) Make sure you have the drivers installed
2) Extract ur firmware it to get its content which would be a .tar
3) Download Odin3 v1.85. Then, extract it to get these two required files – Odin3 v1.85.exe and Odin3.ini. Do NOT delete the .ini file since it’s required too. When asked in step 6 below, open Odin by double clicking on the Odin3 v1.85.exe file.
4) Disconnect your tablet if it’s connected to PC. Power it off. Wait 5-6 seconds for vibration to confirm complete switch off.
5) Now, put the Galaxy Tab 10.1 tablet in Download Mode (also called Odin mode) — press and hold, until Samsung Galaxy logo appears — these keys together: Volume_DOWN + Power.
6) Wait till you a screen with options to boot into recovery or download (odin) mode.
7) Press Volume Up key to boot into download mode.
8) Open Odin (from step 3) — Odin3 v1.85.exe. Admin privileges would be required!
9) Connect your Galaxy tab 10.1 tablet to PC now. You should get the message “Added! !” under the Odin’s message box in the bottom left. And you should also see COM port with a number in Yellow. If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve the right drivers installed!
10) Select these files in Odin at respective tabs.
11) Click the PDA Tab, and select the big .tar file “P7510XEUKL2_P7510XXKL2_HOME.tar.md5″
Important! Make sure these 2 check-boxes are selected: Auto Reboot and F. Reset Time. Also, leave the Re-Partition check-box clear (blank), as we are only using a .tar file or PDA file to flash.
12) Double check everything said in step 11.
13) Now, hit the START button to begin the flashing process. When it finishes, your tablet will automatically reboot — and you can unplug the cable when Galaxy logo appears. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. If it’s red and with FAIL written over it, the process flashing process wasn’t successful, Try again, and take care to complete the whole process without any break whatsoever.
Hit Like If it helps..
Click to expand...
Click to collapse
Thanks
@akhil17kr thanks for your help.
caseym said:
How do you get the drivers that work when the Tab is booted to ODIN? I've tried everything I can find and have been unable to get the correct drivers installed.
Click to expand...
Click to collapse
Install Kies and it should install the drivers. I'm pretty sure you can download them from samsung.com too. But when you use odin make sure that Kies is completely closed (even check in processes in task manager) or odin won't work
Sent from my GT-I9100 using xda premium
Hello everyone!
I have tried researching before asking for help, but I don't seem to find a solution.
I have today partitioned my SD (when will I ever stop fiddling I wonder? ) using CWM recovery.
I have lost access to my SD Card and cannot mount it any longer.
I have Googled today, and the advice was to flash a stock rom again ( I9100XWLPF_I9100OXILP6_I9100XXLPX_HOME.tar) and use the "clear storage" option.
So, I flashed 4.0.3 stock again.
Whenever I follow the steps highlighted here:
1. Shut the POWER OFF, take the battery out and put it back again.
2. Hold the Volume Down button
3. Briefly Press and release the Power button
4. A menu will then appears that let you allows for Fastbook, Recovery, Clear Storage, and Simlock
5. Select Clear Storage by pressing the Volume Down button
6. Quickly Press and release the Power button
7. Select Volume Up for YES and Volume Down for NO
I get into download mode instead.
What am I doing wrong? Why can't I get into the bootload menu I need?
Thanks ever so much to whoever offers help, it's much appreciated.
Fastboot isn't in the galaxy s2. Recovery and download modes are the only modes on this device.
You downloaded a stock ROM, which is most probably a .zip file. Extract it on your PC, you'll get a .tar file (don't extract any further).
Download Odin3 on PC.
Boot phone into download mode. Connect phone to PC, and open Odin. A yellow box should show which indicates that Odin has detected your phone. (If not, you need to download the drivers, search and you'll get them).
Select PDA button, and choose the .tar file and flash. Make sure repartition is unticked. Only things ticked should be f.reset (or similar) and auto reboot.
Sent from my GT-I9100 using Tapatalk 2
After reading everywhere, i found a way to root my Ace4 gm313ml.
I found the instructions on a blog, i'm not sure of the rules for posting links (if someone can enlighten me i'll appreciate it) but i will put his name at the end of the post.
also i'm a new poster so i'm unaware of the structure of a post. Be nice please.
I tried two times and both times worked. For the second time i did a full wipe, reload stock rom to be sure. both times worked fine.
Things you need:
Samsung USB Drivers.
Odin (i downloaded the latest)
iRoot (latest from website)
Stock Rom (for a clean install)
This file. (i can't post links yet!!! )
http : // www . mediafire . com / download / q9ua7opj8wjk9i7 / G313_ALL_ROOT_BY_DAVIDGR15 . zip
For a clean install:
1. Back Up, check for usb debugging, battery charged, etc.
2. Turn off your phone and put it on recovery mode (home, vol up, power)
3. Wipe Data/Factory Reset - Restart and config.
4. Turn off your phone and put it on download mode (home, vol down, power)
5. Open odin as admin, plug your usb cable and flash the stock rom
6. Restart (if you got stuck on the boot animation, recovery mode and factory reset again)
To root:
1. Back Up, check for usb debugging, battery charged, etc.
2. Turn off your phone and put it on download mode (home, vol down, power)
3. Open odin as admin, plug your usb cable, click on AP and load the G313 ROOT.tar file (it's inside the G313_ALL_ROOT_BY_DAVIDGR15.zip) and flash it.
4. After the phone restart we open iRoot on the PC and we let them install a daemon and some apps and wait for the green "Root" button
5 Wait for the phone to restart and the iRoot to say "Root Completed".
Thats it. the phone is rooted but with a chinese supersu. so install a new supersu in your language BEFORE you uninstall the chinese supersu, install link2sd, uninstall the chinese supersu (a blue icon with a white horse) and change the new supersu to "system app"
All credit to David GR, just posting it here for all to find it.
Hello, I need help. To root my Galaxy Ace 4 Lite 4G please help. I bought it from Best Buy.
Hello ?... Anyone?
Sent from my SM-N910T using Tapatalk
this File bricked my phone.
Agcemo said:
After reading everywhere, i found a way to root my Ace4 gm313ml.
I found the instructions on a blog, i'm not sure of the rules for posting links (if someone can enlighten me i'll appreciate it) but i will put his name at the end of the post.
also i'm a new poster so i'm unaware of the structure of a post. Be nice please.
I tried two times and both times worked. For the second time i did a full wipe, reload stock rom to be sure. both times worked fine.
Things you need:
Samsung USB Drivers.
Odin (i downloaded the latest)
iRoot (latest from website)
Stock Rom (for a clean install)
This file. (i can't post links yet!!! )
http : // www . mediafire . com / download / q9ua7opj8wjk9i7 / G313_ALL_ROOT_BY_DAVIDGR15 . zip
For a clean install:
1. Back Up, check for usb debugging, battery charged, etc.
2. Turn off your phone and put it on recovery mode (home, vol up, power)
3. Wipe Data/Factory Reset - Restart and config.
4. Turn off your phone and put it on download mode (home, vol down, power)
5. Open odin as admin, plug your usb cable and flash the stock rom
6. Restart (if you got stuck on the boot animation, recovery mode and factory reset again)
To root:
1. Back Up, check for usb debugging, battery charged, etc.
2. Turn off your phone and put it on download mode (home, vol down, power)
3. Open odin as admin, plug your usb cable, click on AP and load the G313 ROOT.tar file (it's inside the G313_ALL_ROOT_BY_DAVIDGR15.zip) and flash it.
4. After the phone restart we open iRoot on the PC and we let them install a daemon and some apps and wait for the green "Root" button
5 Wait for the phone to restart and the iRoot to say "Root Completed".
Thats it. the phone is rooted but with a chinese supersu. so install a new supersu in your language BEFORE you uninstall the chinese supersu, install link2sd, uninstall the chinese supersu (a blue icon with a white horse) and change the new supersu to "system app"
All credit to David GR, just posting it here for all to find it.
Click to expand...
Click to collapse
This File bricked my phone.........
ok guys, this is the easiest method for u guys who own a320y (ds) , maybe works with a320f version.
i have read many threads here according to gaining root for this device, but i got problem with twrp after flashing rom with odin. twrp cant mount /data
okay, here is the solution for u guys who dont have external sd card.
(READ IT CAREFULLY)
1. Download stock firmware related to your device (in this case, a320y/DS. but i think i t will working fine for a320f version)
2. Download Latest odin version from here https://odindownload.com/, and intall on your pc
3. Make sure u have adb installed on your pc, and also have samsung usb driver installed too. u can find it here
4. connect your device to pc on download mode (hold volume down , home, and power button until you see blue screen and press volume up button to go to download mode)
5. extract your firmware you download wherever you want.
6. open odin and you will see your device there. (something like 0:[com6])
7. choose the file you extracted (AP - AP , CSC - HOME CSC , BL - BL , CP - CP) , then un-tick the auto-reboot.
8. press start.
----------------------------------
9. when its done, disconnect your device, and connect it again.
10. press reset on odin
11. press ap button and select twrp file (.tar) = u can download twrp for our device here
12. untick auto reboot option again
13. press start.
---------------------------------
14.. when its done, force restart your device by pressing and hold vol down , home , power button until the screen is gone black. and the device will reboot to system.
---------------------------------
15. finish the setup for the first time, and enable the developer setting (go to about phone, software information and press build number 5-10 times)
16. press back button 2 times, and u will see developer option on the lowest screen.
17. go to developer option and enable OEM UNLOCK, disable auto update system, ENABLE USB DEBUGGING. see your phone screen, it will asking for usb debugging authorization. press yes
18. now go back to TWRP turning off your device, after the screen goes off, hold volume up, home button, and power button until u get inside twrp again.
19. download magisk zip here
20. press advanced button, and press sideload and enable it.
21. disconnect and reconnect your device to pc.
22. open CMD (win + R , and type CMD), now in command screen, type this
adb sideload yourdownloaddirectory/magisk-v16.0.zip
Click to expand...
Click to collapse
23. after the progress done, u can reboot your phone.
24. download magisk manager here and install on your phone, give permission to install the .apk file.
25. now your device is ROOTED, WITHOUT ANY LAG ON LOCKSCREEN, AND WITHOUT ANY PROBLEM WITH TWRP RECOVERY.
==i make this tutorial because i myself had facing the problem when installing twrp. after flashing the firmware and straight reboot to twrp, the /data folder is still mounted, but after reboot to system and back to twrp, it cant mount the /data anymore. so i need to wipe the data again and again. but after installing twrp and flashing the magisk.zip file , the problem with /data is gone. i dont need to wipe /data anymore :victory: and some people are facing the lag while unlocking screen with secured lockscreen (pattern/password) after rooting using chainfire.zip . but with magisk.zip , the lagg is gone forever ==
sorry for my english, but i think u guys can understand it.
Feel Free to ask me if u guys facing problem with this tutorial, i will help!
because many people here are helped me a lot for every problem i had, so i think this time is my time to helping others too
Is this guide for Nougat or Oreo?
AK2H said:
Is this guide for Nougat or Oreo?
Click to expand...
Click to collapse
ah yeah sorry, this tutorial is for Nougat version.
have not try oreo because still not released for my country.
Can I still use fingerprint to unlock the screen when rooting this way?
leo31 said:
ok guys, this is the easiest method for u guys who own a320y (ds) , maybe works with a320f version.
i have read many threads here according to gaining root for this device, but i got problem with twrp after flashing rom with odin. twrp cant mount /data
okay, here is the solution for u guys who dont have external sd card.
(READ IT CAREFULLY)
1. Download stock firmware related to your device (in this case, a320y/DS. but i think i t will working fine for a320f version)
2. Download Latest odin version from here https://odindownload.com/, and intall on your pc
3. Make sure u have adb installed on your pc, and also have samsung usb driver installed too. u can find it here
4. connect your device to pc on download mode (hold volume down , home, and power button until you see blue screen and press volume up button to go to download mode)
5. extract your firmware you download wherever you want.
6. open odin and you will see your device there. (something like 0:[com6])
7. choose the file you extracted (AP - AP , CSC - HOME CSC , BL - BL , CP - CP) , then un-tick the auto-reboot.
8. press start.
----------------------------------
9. when its done, disconnect your device, and connect it again.
10. press reset on odin
11. press ap button and select twrp file (.tar) = u can download twrp for our device here
12. untick auto reboot option again
13. press start.
---------------------------------
14.. when its done, force restart your device by pressing and hold vol down , home , power button until the screen is gone black. and the device will reboot to system.
---------------------------------
15. finish the setup for the first time, and enable the developer setting (go to about phone, software information and press build number 5-10 times)
16. press back button 2 times, and u will see developer option on the lowest screen.
17. go to developer option and enable OEM UNLOCK, disable auto update system, ENABLE USB DEBUGGING. see your phone screen, it will asking for usb debugging authorization. press yes
18. now go back to TWRP turning off your device, after the screen goes off, hold volume up, home button, and power button until u get inside twrp again.
19. download magisk zip here
20. press advanced button, and press sideload and enable it.
21. disconnect and reconnect your device to pc.
22. open CMD (win + R , and type CMD), now in command screen, type this
23. after the progress done, u can reboot your phone.
24. download magisk manager here and install on your phone, give permission to install the .apk file.
25. now your device is ROOTED, WITHOUT ANY LAG ON LOCKSCREEN, AND WITHOUT ANY PROBLEM WITH TWRP RECOVERY.
==i make this tutorial because i myself had facing the problem when installing twrp. after flashing the firmware and straight reboot to twrp, the /data folder is still mounted, but after reboot to system and back to twrp, it cant mount the /data anymore. so i need to wipe the data again and again. but after installing twrp and flashing the magisk.zip file , the problem with /data is gone. i dont need to wipe /data anymore :victory: and some people are facing the lag while unlocking screen with secured lockscreen (pattern/password) after rooting using chainfire.zip . but with magisk.zip , the lagg is gone forever ==
sorry for my english, but i think u guys can understand it.
Feel Free to ask me if u guys facing problem with this tutorial, i will help!
because many people here are helped me a lot for every problem i had, so i think this time is my time to helping others too
Click to expand...
Click to collapse
Do I have to perform steps 1-8 if I'm already in Nougat?
Has someone tried this on an SM-A320FL with Android 8.0 and SD card inserted?
simple_s said:
Has someone tried this on an SM-A320FL with Android 8.0 and SD card inserted?
Click to expand...
Click to collapse
It's works fine.