To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Xiaomi Redmi Note 5 can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
last week i bought a Redmi 5 Plus 4gb/ 64gb Global then i tried to test charge time and quick charge.. 3-4 times with a qualcomm QC 3.0 charger and another QC 2.0 charger.. The results are similar: all about 2 hour.. the charge time with Xiaomi's own 2A Charger it take about 2 and half hour. i know its good but not so good.. By the way i notice that when test with QC3.0 charger it can not charge with 12V.. (i used a usb tester to see voltage and Current) i just saw 9.30v as max voltage. its behave look like QC2.0 not QC3.0
Snapdragon 625 should be support QC3.0 isnt it?
Are there anyone test quick charge?
I have a QC 2.0 charger,takes about 2 hour to fully charge my R5 phone... don't have tester to measure voltage,but phone doesn't heats up,its around 28 C when charging.Charger does
all my qc3.0 tests take 2 hours too. i see my qc 3.0 charger work as qc 2.0 charger. maybe my charger not work as qc 3.0 maybe our phone not support qc 3.0 we will see... i will buy a new qc 3.0 charger and i will test it again then i share the results here too.
using moto g4 plus turbo charger . charging speed 2600+mah . takes approx 1 n half hr.
rajit said:
using moto g4 plus turbo charger . charging speed 2600+mah . takes approx 1 n half hr.
Click to expand...
Click to collapse
thats good score :good::good: but i ordered another qc3.0 adaptor from aliexpress it has 3 port, i will share the score about a mont later
I think it has QC 2.0 instead of 3.0
A QC 3.0 charger is backward compatible.
redsfury said:
I think it has QC 2.0 instead of 3.0
A QC 3.0 charger is backward compatible.
Click to expand...
Click to collapse
i agree with you
welll my new charger delivered me from china, so i tested it a few times. its better than my qc2.0 charger and my other qc3 car charger ( i think its not qc3.0 its just qc2.0 ) My new charger is not as good as expected.. charge time is an hour and 45 minutes. .. its mean 15 min better than qc.2.0 ... i saw 10.1v and 1,35 amp on my usb tester, it could be 12v... Anyway we can see that the phone supports qc 3.0 but not at all its need powerfull and good qualty QC3.0 charger, so if you want to buy a QC3 charger i I recommend that you need to research well.
amedian said:
thats good score :good::good: but i ordered another qc3.0 adaptor from aliexpress it has 3 port, i will share the score about a mont later
Click to expand...
Click to collapse
I'm planning to buy my Xiaomi Redmi 5 Plus from AliExpress. Do you advise me to do so,?
I use my Axon 7 charger which works fine.
Envoyé de mon Redmi Note 5 en utilisant Tapatalk
I've seen mine go up to 2600 mah with a samsung quick charge adaptor, don't know waht version of QC thou, 1.5 hours to 100%.
Cheers!
Ramon S.
I'm using my old charger from vivo , is this normal charging speed?
I tried a charger that is certified by Qualcomm with QC3.0 and got around 2470 mAh (4.171 V)
PLease help! I am facing some battery calibration issues. The phone hardly charges up to 100% no matter how long you charge it. It just gets stuck at 96% or 97% and then the phone goes off at 19% on usage. I have tried different calibration apps to no avail. I even did a clean flash using the miflash tool, still no luck. Somebody help o
mathefaro said:
PLease help! I am facing some battery calibration issues. The phone hardly charges up to 100% no matter how long you charge it. It just gets stuck at 96% or 97% and then the phone goes off at 19% on usage. I have tried different calibration apps to no avail. I even did a clean flash using the miflash tool, still no luck. Somebody help o
Click to expand...
Click to collapse
You are not alone. R5 plus and some another xiaomi device, sometimes we see this problem. And there is no software solution. Wipe, mi flash, battery calibrationi root... I tried everything but no luck.
Only solution is;
Remove the back cover (i did it, its not so difficult.)
Remove the battery connector plug
Wait a few seconds
Plug it back.
Thats done. Problem solved.
https://www.youtube.com/watch?v=JkeP30myjF8
amedian said:
welll my new charger delivered me from china, so i tested it a few times. its better than my qc2.0 charger and my other qc3 car charger ( i think its not qc3.0 its just qc2.0 ) My new charger is not as good as expected.. charge time is an hour and 45 minutes. .. its mean 15 min better than qc.2.0 ... i saw 10.1v and 1,35 amp on my usb tester, it could be 12v... Anyway we can see that the phone supports qc 3.0 but not at all its need powerfull and good qualty QC3.0 charger, so if you want to buy a QC3 charger i I recommend that you need to research well.
Click to expand...
Click to collapse
Can you please confirm whether it supports quick charge 3.0 ?
I`m about to buy a mi quick charge 3 adapter.
You can post screenshot of your file located at /sys/class/power_supply/battery/uevent
Just want to be sure. That`s it.
I know I might be late but I'm getting around 4.4v is that normal?
kemdroid said:
I know I might be late but I'm getting around 4.4v is that normal?
Click to expand...
Click to collapse
if you use normal charger. im also getting 4.4V. You can try quick charge 2 or higher (it`s compatible)
paulb86 said:
if you use normal charger. im also getting 4.4V. You can try quick charge 2 or higher (it`s compatible)
Click to expand...
Click to collapse
Actually I heard it's fine. I'm using quick charge 3.0. Redmi Note 5 AI/Global. Fully charges from 0 in 1hr 50 mins.
Hello guys, So I bought an almost new Honor View 10 from someone and they gave me the phone with a Samsung Adaptive Fast Charger and not the Huawei one. It works when I plug it except I noticed 2 things:
1) The phone stops charging few seconds after I log into the phone and start using it.
2) Battery duration was fantastic at first, said 2 days x hours left at 100% charge, now it says about 1 day x hours left.
The output on the charger is 9V 1.67A or 5V 2A. I have charged the phone about 4 or 5 times since getting it. So what do you guys think ? Is this charger ok and I should keep using it( i.e It wont ruin my battery) or should I spend some money and buy a Huawei one?
Thanks !
I rather prefer the original one, to prevent thigs like is happening to you
I don't think Super Charge will work with the Samsung charger.
Samsung's Adaptive Charger won't work as quick charge on view10, it will only charge the phone at the rate of 5v 2a.
Ok so I got my P30 pro few days ago and I decided to test the wireless charging I have all Samsung wireless chargers I placed the phone onto the pad it does its wireless charging animation says it's wireless y charging but it does not charge at all I also have pixel stand says it's charging but does not. I also have a mate 20 pro chargers just fine. It does super charge with the 40 watt adapter
My question is could there be a compatibility issue with this model and the Samsung fast charger the unite was sealed and in the box I also had it imported over from the UK to the US from Clove Technology I have bought a few phone from them all have been good
I'm going to test the reverse charging today and maybe order the Huawei wireless charger thanks hope I don't have bad unite
wricu01 said:
Ok so I got my P30 pro few days ago and I decided to test the wireless charging I have all Samsung wireless chargers I placed the phone onto the pad it does its wireless charging animation says it's wireless y charging but it does not charge at all I also have pixel stand says it's charging but does not. I also have a mate 20 pro chargers just fine. It does super charge with the 40 watt adapter
My question is could there be a compatibility issue with this model and the Samsung fast charger the unite was sealed and in the box I also had it imported over from the UK to the US from Clove Technology I have bought a few phone from them all have been good
I'm going to test the reverse charging today and maybe order the Huawei wireless charger thanks hope I don't have bad unite
Click to expand...
Click to collapse
I just updated my Firmeware 9.1.0.124 it's charging fine now it's also powering on when i put it on the wireless charger wasn't doing that before the update
Hi everybody,
I have a question regarding using Realme 65w charger with Pad 5 Pro.
So Xiaomi 67w charger should recharge Pad 5 Pro on about an hour if I understood correctly, but when using 65w (10V, 6.5 A) charger from my Realme GT it takes more that 2 hours to recharge it and I find it weird because it's only 2w weaker.
Does Xiaomi have some special way of charging or I missed something when researching about Watts when charging? In my opinion it should take a little longer to charger iz with 65w and not twice as long.
Ultra fast charging employed by Chinese OEMs are mostly proprietary meaning they are limited to their devices only. When used to charge a device from a different brand they fall back to QC 2/3 or maybe USB-PD.
Hortisay said:
Hi everybody,
I have a question regarding using Realme 65w charger with Pad 5 Pro.
So Xiaomi 67w charger should recharge Pad 5 Pro on about an hour if I understood correctly, but when using 65w (10V, 6.5 A) charger from my Realme GT it takes more that 2 hours to recharge it and I find it weird because it's only 2w weaker.
Does Xiaomi have some special way of charging or I missed something when researching about Watts when charging? In my opinion it should take a little longer to charger iz with 65w and not twice as long.
Click to expand...
Click to collapse
The only charger that managed to charge at real 65 w is a original 67w Xiaomi charger. Nothing else enabled the ultra fast charging. If you what I can post battery guru stats of the tablet charging with the Xiaomi original and a baseus 65w Gan charger.
Make sure your USB C is 6A to use with that 65W!
Hello,
have you been able to find compatible wireless charger?
The chargers I've tried so far:
Samsung EP-P1300 - Gave about 4.2W with screen on, battery temperature 39C (measured with AccuBattery app)
RENEW FORCE 3000 mA - Was discharging with screen on
Appio 2500 mA - Gave about 3.4W with screen on, battery temperature 39C
Some huawei charger (probably CP60) - Was discharging with screen on
Huawei and Samsung chargers work well with Huawei/Samsung smartphones, but not with my moto x40.
It doesn't matter if I have the protective case on or what kind of wall brick I use (tried with 3 different).
So do you have a charger that is able to charge with at least ~10W?
I bought this one on Aliexpress
https://www.aliexpress.com/item/1005005414454009.html?spm=a2g0o.order_list.order_list_main.11.1e5e1802bvvnGb
Tried to find 125w without success, but seems that this one would do the job
GigogoHK said:
I bought this one on Aliexpress
https://www.aliexpress.com/item/1005005414454009.html?spm=a2g0o.order_list.order_list_main.11.1e5e1802bvvnGb
Tried to find 125w without success, but seems that this one would do the job
Click to expand...
Click to collapse
But that's not a wireless charger