Related
So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
kazador07 said:
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
I fixed the zte avid plus z828 frp problem!
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
please do!!!!
Yerhope said:
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
Click to expand...
Click to collapse
Hello yerhope!
from your last report on zte z828 frp bypass, i understood that you finally fix the , not able to access the Developer option nor access the factory reset. I am very keen to know how you did it.
I am a victim of this same circumstance.
guide please?
cant click reset my self
Hey, I would like to highly request the tutorial....
Furthermore, I'd like to say I've poured over these sort of sites, rephrased my questions, etcetc all trying to get the same things accomplished, getting past the google password, and yet you with your quick clearly stated actually step by step explanation were the one to get me the farthest in fixing this problem. :highfive:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
can root and remove with gcpro.
thats what i did. with this, even wen u get into settings and tap factory reset, ntn will happen.
re: zte z828 resolved problem???
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
xdauser9981 said:
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
Click to expand...
Click to collapse
He did get in. I did get in myself but when i tap factory reset nothing happen.
(Security patched)
Maybe he did resolve it like i did.
Root and remove it with gcpro
Thats what i did.
On some ZTE phones (has worked on 1 but not another for me), you can use the emergency dialer to dial:
*983*987#
This will lead you directly into factory reset options (if it works).
Solution worked on Acer Iconia B1-850 Tablet
Yerhope said:
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
Click to expand...
Click to collapse
Solution!
Yerhope said:
So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Click to expand...
Click to collapse
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
o12VOLTSo said:
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
Click to expand...
Click to collapse
Does this mean you have confirmed this on ZTE?
Yerhopes solution worked for my zte lever
Follow yerhopes solution after step 15 while in settings go to backup and reset make sure back up data is off then factory reset erase Everything phone will reboot old owners info gone no need to download anything worked for 2 Zte levers i bought from ebay.
Bought a EE Jay Tablet (also a ZTE tablet) that had FRP enabled, easiest way I could do it was
1. connect to wifi, get to the previous account required screen.
2. open the keyboard and hold the @ symbol and open the keyboard settings.
3. top right corner press the 3 dots and choose help and type in apps in the search box.
4. access the app settings screen via the link from the help section then goto all and launch settings app
5. enable unknown sources in security and return to app settings screen and launch chrome this time or any browser.
6. goto http://rootjunkysdl.com/files/?dir=Apps and download this file com.sika524.android.quickshortcut.apk
7. you may get a download notification that the file has finished if not go back again to the app settings screen and all again and launch downloads app
8. you will now see the file download open it and install and then open the app
9. in the quick shortcut app search for google account and choose email and password and select try
10. now the google accounts manager has launched, in the top right corner press the 3 dots and choose browser sign-in
11. sign in with a google account and once done it will close and go back to the quick shortcut maker.
12. you still won't have access yet but all I done was reboot the device and continued the setup, this time there was no errors or required sign in and had full access.
Hope this helps someone, this was basically a copy of this video which may be helpful https://www.youtube.com/watch?v=GKdVvBSIb0M
Idk wat im doing but watever I do cant make crap any worse so I went under security and theres a place says trusted agents I clicked that and it said google smart lock so I turned it off im hoping this works guys ill let u know
yes
Arykit said:
Does this mean you have confirmed this on ZTE?
Click to expand...
Click to collapse
I used this method, personally, for zte Avid I believe. Yerhope's solution works for some firmwares prior to firmware i was on. i'm sorry, i do not recall that at this moment as it was some time ago. if Yerhope's solution is not effective for you, then progresss to my steps that pick up right where previous solution left off. so once again, YES, this worked on my device, did not test for others. my understanding is kingo can acquire root access in a special way as well that will allow you to adb clear frp. looking for commands? i do not have them sorry.
hi
i'm trying to frp bypass for infinx hot 4 android 6.0 ... with frb baybass 1.0.apk and quick shortcut maker apk but i can't found Browser sign-in to enter the new account .. any way to do this ?
is it mtk or qualqam phone?
ahmedsaber20005 said:
hi
i'm trying to frp bypass for infinx hot 4 android 6.0 ... with frb baybass 1.0.apk and quick shortcut maker apk but i can't found Browser sign-in to enter the new account .. any way to do this ?
Click to expand...
Click to collapse
i had this problem on my android 5.1 , after tried many way to fix , i found a new working way for my phone ,you must try this step :
1) STEP 1. Go to the Google page where it is showing to enter the login details. Â Shown in below fig.
STEP 2. Now you have to find that How can you go to the Phone Setting from the keyboard. First You try to go to the Keyboard Setting anyhow and from there to the Phone Setting. It is pretty simple.
NOTE: You can go to the keyboard setting from the Keyboard itself. You have to find that after pressing which key it will take you to Keyboard setting option. Like in my case (using Google keyboard) I can go to the Google Setting by holding the commas for some sec. Â So you have to find this yourself , Which key takes you to keyboard setting.
STEP 3. When you are at the Keyboard Setting. Chick on the three dot menu at the top to the right.
STEP 4. Go to About  and then to Open source Licences and copy any text there.
STEP 5. After copying text, there is Search bar option appears in the top to the right. Click on search bar.
STEP 6. Then it will show to Complete Action using. You will click on Chrome only.
STEP 7. In the search bar of Chrome, type SETTING and it also give suggestion of Phone Setting. Â Click on phone setting.
STEP 8. Account / choose exiting / enter email and password of any gmail account to sign in / just wait account to sync / just reboot the phone
STEP 9. ACCOUNT ADDED ( FRP BYPASSED)
Bypasa FRP by VLonco Channel
U can check my tutorial on youtube. Keywordd VLonco Channel
Use miracle box. Works for me all the time
AndroidHQ254 said:
Use miracle box. Works for me all the time
Click to expand...
Click to collapse
Can i get it throught the inthernet without paying one hundred dollars ????
SamsungGalagaxy said:
Can i get it throught the inthernet without paying one hundred dollars ????
Click to expand...
Click to collapse
You can get a patched version on the internet
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
How to get avtivation code 4 huawei media pad gr8
Ameer latif said:
How to get avtivation code 4 huawei media pad gr8
Click to expand...
Click to collapse
Hi, found a reply in a facebook post with the bypass code shared by Mohd Ridzwan.
But due to restriction of my account, i hit below msg while having url in the reply.
The following errors occurred with your submission:
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Click to expand...
Click to collapse
Please google: Gr8 powered by Malay Mail "Lim KY" "Mohd Ridzwan"
And look for the reply in the post by Lim KY, February 22, 2016 · Kuala Lumpur.
methods can check out my blog:
HUAWEI S7-701U Gr8 ACTIVATION CODE BYPASS OR FIRMWARE 100%
METHOD 1: To perform hard reset for your Huawei S7-701u you may need to save all of your apps and files to your memory card and take it out...
dreamyskyblue.blogspot.com
traviskb said:
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
Click to expand...
Click to collapse
B
traviskb said:
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
Click to expand...
Click to collapse
Bt how I install app remover were as the phone is unaccesable,
billson.chew.my said:
Hi, found a reply in a facebook post with the bypass code shared by Mohd Ridzwan.
But due to restriction of my account, i hit below msg while having url in the reply.
Please google: Gr8 powered by Malay Mail "Lim KY" "Mohd Ridzwan"
And look for the reply in the post by Lim KY, February 22, 2016 · Kuala Lumpur.
Click to expand...
Click to collapse
How can I by pass, i have the code the problem is the WiFi, Wereas it is connected,
FRP Bypass Samsung Galaxy S10 - 100% WORKING!
This method works!! No simcard is need to be inserted, no puk code is need to be used or other crap I have seen on alot of places, this is simple and a very easy way to frp bypass your samsung galaxy 10 without paying money for "pro" tools, this method is so easy so even your grandmother would succeed.
Totally there is three ways that I have found that allows anyone to bypass FRP very easy on the latest firmware (2020-03-14)!
One method is via NFC, the second option is via OTG cable between one android device on android v9.0 and your samsung s10 that is on android v10.0 and the third option is the most easy one so i decided to describe it for you all out there.
0. Turn off the device and remove simcard.
1. Enter recovery mode by keep device off and then press volume up + bixby + power button
2. Wipe cache and do a factory reset and then choose to reboot your device
3. Phone will now start as normal, change language to your prefered language
4. Take a screenshot at welcome screen with power + vol down, you will see "Allow samsung capture to access photos, media and files of your device" - Choose 'Deny' here.
5. Take another screenshot at welcome screen, an extra option that is 'Deny & dont ask again' - Choose this one this time
6. Now, take a third screenshot at welcome screen and you will get a totally different option, You will get a Allow Permission window popup instead now, choose 'Site Settings' here.
7. You will now get into Samsung Capture option, choose to allow permissions for storage if you want to be able to take screenshot, however the important part is to go to Permission option.
8. Now you should see 'Storage, Camera and Microphone, choose Storage' option here and then press on See all apps with this permission
9. Now press on the three dots in upper right corner and choose "Show System" option
10. There is many options you can choose here, let us browse down to "Google Chrome/Chrome" browser - Edit option from Deny to Allow and then press on see all Chrome permissions if you want to start chrome for example.
11. But even more interesting is that you will see settings icon at top, press on 'See all Settings permissions' - In next window just double click the settings icon at top for get to next window and now in down left corner - Choose 'Open' and you're in settings!
12. Scroll to bottom and press on 'about phone' and u will see "Reset" button, press on it to reset settings only and keep your data. (optional)
13. Now you just need download google account manager and add a new account and the old one will be overwritten (use web login in google account manager by pressing in upper right corner when you started account manager). If you want to join System UI just choose system ui in quickshortcutmaker.
quickshortcutmakercan be downloaded from: quickshortcutmaker
Pictures for those who prefer that can be found on my repo, click can be found on my github, click here for visit the repo.
Enjoy your fully unlocked Samsung Galaxy 10 device.
// wuseman
14 april 2020
I believe they fixed it. Is there any other method like going previous version and trying it again?
What's the furthest security patch
Up to what security patch does this support?
Does not work on A
download is offline....
speckdeckel said:
download is offline....
Click to expand...
Click to collapse
Fixed the url.
In 2023 i just try today to bypass my Samsung FRP using SamFw FRP Tool it work's and it 100% free and one click work.
BishalPo said:
In 2023 i just try today to bypass my Samsung FRP using SamFw FRP Tool it work's and it 100% free and one click work.
Click to expand...
Click to collapse
yeah "Add unlock FRP all version, all model (paid service)" really ?!?!?
BishalPo said:
In 2023 i just try today to bypass my Samsung FRP using SamFw FRP Tool it work's and it 100% free and one click work.
Click to expand...
Click to collapse
very doubtful about this, is it possible to check the source code?
I don't see how it would work in practice, especially when it is not possible to use mtp commands (at the time of writing it is not possible afaik, not last week when I tried on s23) on the recent android phones
It might work on older models but hardly on today's, tell me more technical details how that tool work please?
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
NOTE: This will not work for Chinese variants. These codes are filtered and will only work for international variants. However, the Chinese variants should be immediately unlockable.
-----
UPDATE:
It seems like OPPO caught onto this program. That MAC address is no longer accepted. However, there is a workaround (thanks to @Sonic Steven).
If you set the custom MAC on any adapters, remove it.
If you have the Secrecy program running, close it.
Disable any Ethernet/wired/virtual adapters, leaving only WiFi enabled. If you don't have a WiFi adapter, you may be able to leave Ethernet enabled, but it isn't guaranteed to work.
In Device Manager, click the root of the device tree (it should be your computer's name).
Open the "Action" menu and click "Add legacy hardware".
Click "Next" and select "Install the hardware that I manually select from a list (Advanced)".
Click "Next" again and select "Network adapters" in the list.
Click "Next" again. Once it loads, select "Microsoft" in the "Manufacturer" list.
In the "Model" list, select "Microsoft KM-TEST Loopback Adapter" (the name may be slightly different on other systems; select the one that has "Loopback Adapter" in the name).
Click "Next" twice to begin the installation.
Once the installation is complete, you should be able to reopen the Secrecy program and decrypt.
NOTE: The Secrecy program requires a working internet connection. It connects to OPPO's servers and performs some sort of authentication.
Zacharee1 said:
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
Click to expand...
Click to collapse
Thanks a lot (understatement) I will try follow your advice..
Does Unlocking the bootloader of Realme X3 SuperZoom, bricks the fingerprint sensor(Side-Mounted)???
Didn't passed step no. 13
I already tried but didn't passed step no. 13
---------- Post added at 01:01 AM ---------- Previous post was at 12:58 AM ----------
Zacharee1 said:
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
NOTE: This will not work for Chinese variants. These codes are filtered and will only work for international variants. However, the Chinese variants should be immediately unlockable.
Click to expand...
Click to collapse
I already tried but didn't passed step no. 13
my device doesnt come up i have mtp on and its not working, if i click unlock my device pops up but nothing is in right lane. any ideas australian oppo find x2 pro
---------- Post added at 12:46 PM ---------- Previous post was at 12:28 PM ----------
my device doesnt come up i have mtp on and its not working, if i click unlock my device pops up but nothing is in right lane. any ideas australian oppo find x2 pro
same Find X2 Pro sec5 dont show ok on the right side
hello
with oppo a9 2020;
does not work, I start the procedure with Sec5.exe it recognizes the device but does not give the ok; the same thing happens when you start secrecy.exe!
How can I solve?
@Zacharee1
I think this thread should be moved to https://forum.xda-developers.com/f/android-general.1424/, since it is not only for Realme X3 SuperZoom.
This solution is also applicable to RealmeC11(RMX2185).
credit to:
@Zacharee1
@HemanthJabalpuri
yeah i dont think this works anymore..
Sage said:
yeah i dont think this works anymore..
Click to expand...
Click to collapse
This works flawlessly in Realme C11.
HemanthJabalpuri said:
This works flawlessly in Realme C11.
Click to expand...
Click to collapse
recently? i am hearing in other threads that it was a recent change that made it stop working? only a few days ago.
Sage said:
recently? i am hearing in other threads that it was a recent change that made it stop working? only a few days ago.
Click to expand...
Click to collapse
Yes, see above post. https://forum.xda-developers.com/t/...ow-bootloader-unlocking.4136341/post-84091819
Got it working. Have NO MAC address listed in the Loopback and have at least 1 other network device active with internet access!
i thought you were supposed to have no internet adapter.
Also working on Realme 7 Pro, quick question, I'm already rooted with custom recovery, am I allowed to change the region without removing root and custom recovery?
Hello @Zacharee1
THANK YOU VERY MUCH!!
I was struggling to unlock the bootloader on a realme 5 with Android 10 and you SAVED MY ASS!!
Guide is working!!
Does not work on realme 7 RMX2155 : ( . In depth Test app Failed to submit application is displayed
works on a realme 7 pro, thanks.
dynux90 said:
Hello @Zacharee1
THANK YOU VERY MUCH!!
I was struggling to unlock the bootloader on a realme 5 with Android 10 and you SAVED MY ASS!!
Guide is working!!
Click to expand...
Click to collapse
how did you get it to work,,cause when i click on start unlocking my laptop screen just flashes,,but nothing happens on the sides of the secrecy autounlocker ,,a few trials here and there i was able to acquire a token from the software but when i input in my AuthTokenDecrypt it says signature doesn't match
Hye
Is This Still Working For realme 3 pro?