I DON'T OWN THE DEVICE, AND THAT TWRP ISN'T TESTED YET
DOWNLOAD MODE (For Recovery Step)
• Make sure to have bootloader unlocked
1. Put USB driver
2. Shutdown your F41
3. Press & hold both vol + vol - keys
Recovery Download
- Download here
FLASHING RECOVERY
1. Download and open Odin tool
2. Click in AP Tab and select TWRP_3.4.0-0_F41.tar file
3. Click on start and wait
4. Flashed correctly you see pass message
Sources
Device Tree (Staging yet)
Team Win Recovery Project: For nice development and good custom recovery
Device Group
WARNING
If the TWRP don't boot, let me know via Telegram! I'm working in kernel, you can see here: https://github.com/samsungexynos9810/android_kernel_samsung_f41/commits/master, remember: It's broken by Samsung.
Brother Please explain me about , How to unlock bootloader for samsung f41? Please reply me brother.
Related
Hello.
On request of few users, here below is attached latest version of TWRP recovery for Desire 820u
NOTE that it is ONLY for u version (Qualcomm), so will NOT WORK on any other.
Builded from stock HTC precompiled kernel and stock twrp sources with fresh setup for device tree and in the moment A52 device kernel headers as HTC wasn't release kernel sources at the moment.
Please, test if recovery boot and give me respond.
Thank You
DOWNLOAD
PS, in the future, all ROM's, KERNEL's, RECOVERY and so on goes into XDA: DEVDB which You can find of the top of device forum (HERE)
#CHANGELOG
12.10.2015. Second build
**adb enabled, debug enabled
11.10.2015. First build
**boot but restart, finally stuck
**no adb
HTC Desire826 (A52) opensource link: HTCdev
Github device tree link: GIThub
I recently bricked my phone and got the MoBo replaced by Service Center.. Facing red/pink tint in Camera while using "flash with a/f" mode only.. So havn't unlocked Bootloader or rooted till now until the camera problem gets solved..
. Well thanks for the cooking.. Will test and inform ASAP..
---------- Post added at 06:45 PM ---------- Previous post was at 06:44 PM ----------
I recently bricked my phone and got the MoBo replaced by Service Center.. Facing red/pink tint in Camera while using "flash with a/f" mode only.. So havn't unlocked Bootloader or rooted till now until the camera problem gets solved..
. Well thanks for the cooking.. Will test and inform ASAP..
fergy said:
Hello.
On request of few users, here below is attached latest version of TWRP recovery for Desire 820u
NOTE that it is ONLY for u version (Qualcomm), so will NOT WORK on any other.
Builded from stock HTC precompiled kernel and stock twrp sources with fresh setup for device tree and in the moment A52 device kernel headers as HTC wasn't release kernel sources at the moment.
Please, test if recovery boot and give me respond.
Thank You
DOWNLOAD
PS, in the future, all ROM's, KERNEL's, RECOVERY and so on goes into XDA: DEVDB which You can find of the top of device forum (HERE)
Click to expand...
Click to collapse
i tried it ..................
working but not stable
after few sec ( about 5 -7 sec ) reboot and reboot again
need some polish
aumtaigor said:
i tried it ..................
working but not stable
after few sec ( about 5 -7 sec ) reboot and reboot again
need some polish
Click to expand...
Click to collapse
Superb!!
Thank You very much for this test :good:.
I will make another version with enabled debug so We can see what is going on and what causing reboot.
Will upload in the morning (going sleep now), so within 12 hours will be up here.
Cheers
fergy said:
Superb!!
Thank You very much for this test :good:.
I will make another version with enabled debug so We can see what is going on and what causing reboot.
Will upload in the morning (going sleep now), so within 12 hours will be up here.
Cheers
Click to expand...
Click to collapse
update device stuck in recovery mode ( The device was not even accepting ADB or entering fastboot mode. )
how can i revert or flash any other recovery
please made a flashable zip
aumtaigor said:
i tried it ..................
working but not stable
after few sec ( about 5 -7 sec ) reboot and reboot again
need some polish
Click to expand...
Click to collapse
aumtaigor said:
update device stuck in recovery mode ( The device was not even accepting ADB or entering fastboot mode. )
how can i revert or flash any other recovery
please made a flashable zip
Click to expand...
Click to collapse
Enter into bootloader.
Code:
adb reboot bootloader
Code:
fastboot flash recovery RECOVERY_IMG_NAME.img
...or, install flashify.
Flashable zip will be made when recovery will work. No sense that You have not working recovery in zip.
NEW VERSION ATTACHED IN FIRST POST. PLEASE TEST.
fergy said:
Enter into bootloader.
Code:
adb reboot bootloader
Code:
fastboot flash recovery RECOVERY_IMG_NAME.img
...or, install flashify.
Flashable zip will be made when recovery will work. No sense that You have not working recovery in zip.
NEW VERSION ATTACHED IN FIRST POST. PLEASE TEST.
Click to expand...
Click to collapse
unable to enter in to bootloader mode
always directly boot in to recovery mode
and reboot after 5 - 10 sec
aumtaigor said:
unable to enter in to bootloader mode
always directly boot in to recovery mode
and reboot after 5 - 10 sec
Click to expand...
Click to collapse
Then You doing something wrong. How You try to enter into bootloader?
fergy said:
Then You doing something wrong. How You try to enter into bootloader?
Click to expand...
Click to collapse
i tried all the way i know : adb cmd you provided previously ( adb didn't recognized any devices )
by hard key combination vol- & power button
and from twrp menu
all of them unsuccessful
is there any clue ???
aumtaigor said:
i tried all the way i know : adb cmd you provided previously ( adb didn't recognized any devices )
by hard key combination vol- & power button
and from twrp menu
all of them unsuccessful
is there any clue ???
Click to expand...
Click to collapse
#1
Settings -> About -> Software information -> More
Now, tap approx 5x on "Build number" until it enable "Developer options"
Go back to "Settings" and scroll down to "Developer options", tap on it and find "USB debugging". Tap on it and tap "OK". It can ask You for PGP key what You will accept. After that unplug cable and plug it back. ADB should work.
Now:
Code:
adb reboot bootloader
#2
Press power until come menu
Choose "Restart" and again "Restart"
Press and HOLD "Volume down (-)" until phone restart and boot into Bootloader
fergy said:
Hello.
On request of few users, here below is attached latest version of TWRP recovery for Desire 820u
NOTE that it is ONLY for u version (Qualcomm), so will NOT WORK on any other.
Builded from stock HTC precompiled kernel and stock twrp sources with fresh setup for device tree and in the moment A52 device kernel headers as HTC wasn't release kernel sources at the moment.
Please, test if recovery boot and give me respond.
Thank You
DOWNLOAD
PS, in the future, all ROM's, KERNEL's, RECOVERY and so on goes into XDA: DEVDB which You can find of the top of device forum (HERE)
Click to expand...
Click to collapse
C:\Users\Kasra-Mobile\Desktop\Adb And Fastboot-new>fastboot flash recovery recov
ery-v02.img
target reported max download size of 16777216 bytes
Invalid sparse file format at header magi
sending sparse 'recovery' (15792 KB)...
OKAY [ 1.648s]
writing 'recovery'...
FAILED (remote: image error! (BootMagic check fail))
finished. total time: 1.649s
this recovery doest work on my d820u a51_DTUL
@kasra_eminem M8, You need to unlock Your bootloader first. Go to htcdev.com and unlock bootloader to be able to change recovery.
Sent from my HTC Desire 820 using XDA Free mobile app
@fergy bro bootloader is unlocked!!!
even s-offed with XTC
i flashed the recovery on this post http://forum.xda-developers.com/desire-820/help/qa-htc-desire-820-twrp-recovery-2-8-t2975255
but phone reboot when want too boot in recovery
M8, look at code above...boot magic check fail
Sent from my HTC Desire 820 using Tapatalk
fergy said:
#1
Settings -> About -> Software information -> More
Now, tap approx 5x on "Build number" until it enable "Developer options"
Go back to "Settings" and scroll down to "Developer options", tap on it and find "USB debugging". Tap on it and tap "OK". It can ask You for PGP key what You will accept. After that unplug cable and plug it back. ADB should work.
Now:
Code:
adb reboot bootloader
#2
Press power until come menu
Choose "Restart" and again "Restart"
Press and HOLD "Volume down (-)" until phone restart and boot into Bootloader
Click to expand...
Click to collapse
system is not booting in to operating system its always boot in to twrp ( loop in recovery mode )
neither accepting adb nor fastboot
i think rewrite recovery & boot can resolve this issue , which is may be possible with flashable zip , in my case
or is there any other way ???
You can only flash with stock ruu
Sent from my HTC Desire 820 using Tapatalk
Fastboot flash recovery xx.img
BootMagic checkfail a51ul ?
HTC Desire 820 cihazımdan Tapatalk kullanılarak gönderildi
This is ONLY for U... Take another twrp for UL.
Sent from my HTC Desire 820 using XDA Free mobile app
Sorry for off-topic. @kesra_eminem
How do you s-off your device please give me link.
Sent from my HTC Desire 820 dual sim
TWRP Recovery Moto-C-Plus (Source Build)
TWRP RECOVERY FOR MOTO C PLUS
(Source Build)
I have compiled twrp recovery for moto c plus from source.
LINK :- https://www.androidfilehost.com/?fid=889964283620774903
Instructions:-
The simple way to install twrp recovery on devices,, is to unlock the bootloader..and flash the recovery through fastboot..
step by step instructions by @shripad to flash the twrp on moto c plus WITHOUT unlocking the bootloader or lose any data.
[*]1.>> Download and extract files from here
note:after dowloading file..extract it and copy SuperSU-v2.82-201705271822.zip file in ur sd card,,,,DONT FORGET to flash SuperSU-v2.82-201705271822.zip file after write memory ,,otherwise your device will stuck at moto logo or soft brick
[*]2.>>open download tool(file provided in the above link,use provide sp_flash tool only because moto c plus have secure chip,need to authentication file,, so u cant flash through normal sp_flash tool) and load the download agent "MTK_AllInOne_DA.bin" & authentication file auth_sv5.auth from download_tool folder
[*]3>>.Load the scatter-file found in the provided file.. select preloader only, and select preloader only..but don't flash it.
[*]4.>> Click Alt + Ctrl + V to activate advanced mode in sp flash tool.
[*]5.>>Click on "window" up there and select "write mode"
[*]6.>> Change the Begin address to "0x2d80000" and click on "file path" and choose the TWRP-Moto_C-Plus.img from extracted provided zip file
[*]7. >>Click on "write Memeory", then Power off your device and remove the battery.. press and hold vol- button, then connect phone to pc via USB cable.. press &hold vol- key until pc detect...wait for Write memory ok window appears,, now your recovery is ready.
[*]8.>>Next insert ur battery, press vol+ and power button simultaneously.. than select recovery mode..& boot into recovery
[*]9.>>In twrp recovery select install and locate SuperSU-v2.82-201705271822.zip file in ur sd card and flash it..
[*]10.>>After successful flash... hit reboot device..
!!!! Enjoy!!!!
VISIT HERE FOR PORTED RECOVERY AND MORE GUIDE
https://forum.xda-developers.com/android/software-hacking/guide-flash-twrp-root-moto-c-plus-t3718668
credits: @JackShukla (me) for compiling recovery
@shr!pad for guide and tools
And all My friends who helped me..
Hit Thanks If You Like My Work..
Device Trees for moto c plus :- https://github.com/DhirajSurvase/android_device_moto_C_plus-XT1721
Kernel Trees for moto c plus:- https://github.com/DhirajSurvase/Kernel_Mod_Moto_C-plus
Vendor Trees For moto c plus:- https://github.com/DhirajSurvase/Vendor_moto_c-plus
Join Telegram Group For Moto C Plus Users
https://t.me/moto_c_plus
XDA:DevDB Information
TWRP Recovery Moto-C-Plus, Tool/Utility for all devices (see above for details)
Contributors
JackShukla, shr!pad
Version Information
Status: Stable
Created 2017-12-29
Last Updated 2017-12-29
Thread closed as duplicated with https://forum.xda-developers.com/android/development/twrp-recovery-moto-c-plus-source-build-t3727009
TWRP Recovery Moto-C-Plus (Source Build)
TWRP RECOVERY FOR MOTO C PLUS
(Source Build)
I have compiled twrp recovery for moto c plus from source.
LINK :- https://www.androidfilehost.com/?fid=889964283620774903
Instructions:-
The simple way to install twrp recovery on devices,, is to unlock the bootloader..and flash the recovery through fastboot..
step by step instructions by @shripad to flash the twrp on moto c plus WITHOUT unlocking the bootloader or lose any data.
[*]1.>> Download and extract files from here
note:after dowloading file..extract it and copy SuperSU-v2.82-201705271822.zip file in ur sd card,,,,DONT FORGET to flash SuperSU-v2.82-201705271822.zip file after write memory ,,otherwise your device will stuck at moto logo or soft brick
[*]2.>>open download tool(file provided in the above link,use provide sp_flash tool only because moto c plus have secure chip,need to authentication file,, so u cant flash through normal sp_flash tool) and load the download agent "MTK_AllInOne_DA.bin" & authentication file auth_sv5.auth from download_tool folder
[*]3>>.Load the scatter-file found in the provided file.. select preloader only, and select preloader only..but don't flash it.
[*]4.>> Click Alt + Ctrl + V to activate advanced mode in sp flash tool.
[*]5.>>Click on "window" up there and select "write mode"
[*]6.>> Change the Begin address to "0x2d80000" and click on "file path" and choose the TWRP-Moto_C-Plus.img from extracted provided zip file
[*]7. >>Click on "write Memeory", then Power off your device and remove the battery.. press and hold vol- button, then connect phone to pc via USB cable.. press &hold vol- key until pc detect...wait for Write memory ok window appears,, now your recovery is ready.
[*]8.>>Next insert ur battery, press vol+ and power button simultaneously.. than select recovery mode..& boot into recovery
[*]9.>>In twrp recovery select install and locate SuperSU-v2.82-201705271822.zip file in ur sd card and flash it..
[*]10.>>After successful flash... hit reboot device..
!!!! Enjoy!!!!
VISIT HERE FOR PORTED RECOVERY AND MORE GUIDE
https://forum.xda-developers.com/android/software-hacking/guide-flash-twrp-root-moto-c-plus-t3718668
credits: @JackShukla (me) for compiling recovery
@shr!pad for guide and tools
And all My friends who helped me..
Hit Thanks If You Like My Work..
Device Trees for moto c plus :- https://github.com/DhirajSurvase/android_device_moto_C_plus-XT1721
Kernel Trees for moto c plus:- https://github.com/DhirajSurvase/Kernel_Mod_Moto_C-plus
Vendor Trees For moto c plus:- https://github.com/DhirajSurvase/Vendor_moto_c-plus
Join Telegram Group For Moto C Plus Users
https://t.me/moto_c_plus
XDA:DevDB Information
TWRP Recovery Moto-C-Plus, Tool/Utility for all devices (see above for details)
Contributors
JackShukla, shr!pad
Version Information
Status: Stable
Created 2017-12-29
Last Updated 2017-12-29
Xt1725
Can you please be able to make this work on xt1725, I really need it and when I do the guide from shripard I get the DRAM error.
Mago6246 said:
Can you please be able to make this work on xt1725, I really need it and when I do the guide from shripard I get the DRAM error.
Click to expand...
Click to collapse
New post: https://forum.xda-developers.com/android/development/twrp-recovery-moto-c-plus-source-build-t3727007
The problem of the dram is answered by me in the new twrp post
Hello everybody ,
I need some tricks/advices and I think you guys can help me .
My old and outdated smartphone Android 4.1 is down, so I've bought a brand new Xiaomi Redmi 6A (Android 8 .1).
Anyway, I'm going nuts since few days, trying to root my device...... I've already found some topics online dealing with that issue..... already tested a lot(!)...... but no one works!! :crying:
So I just wonder if someone have already succeded in it? Does anyone have the perfect trick to do it, and especially working links if it requires to download some tools (twrp, magisk, and so on)?
Thanks a lot guys, any help would be appreciated!
root example N°1:
- TWRP recovery is required to Root Redmi 6A without PC, You can Follow Our guide to Install TWRP recovery on Any Android Device without PC: got it from the PlayStore, and install OK
- First of all Get Supersu to Root Your Redmi 6a: OK
- Now paste the Supersu.zip fle in your device’s memory: OK
- Now rename the file to Update.zip: OK
- Now turn off your android smartphone: OK
- Now boot your smartphone in TWRP Recovery mode: OK
- To boot in recovery mode you have to Press Volume up + Power button together or Volume Up + Power + Home button , basically it is different for every phone . Dont release the keys until the smartphone boots in recovery mode: FAILED
root example N°2:
- Unlock Bootloader of your device. Check How to Unlock Bootloader of Xiaomi phones: OK factory settings as I read about
- You’ll lose all your data upon unlocking bootloader. We advise you to backup all your data to a safer location OK
- Download and install the latest Xiaomi USB Drivers on your PC. OK
- Enable Developer Options and USB Debugging from Settings. (Complete guide) OK
- Setup ADB and Fastboot Drivers on your PC. OK
- There should be at least 75% battery on your device to perform the rooting procedure. OK
- TWRP image file for Redmi 6A – Download OK
- Download the TWRP image file based on your device model from above links to your computer. Rename the file to twrp.img and copy it to ADB & Fastboot folder OK
-Enable Developer Options and USB Debugging from Settings. (Complete guide)OK
-Setup ADB and Fastboot Drivers on your PC.OK
-There should be at least 75% battery on your device to perform the rooting procedure.OK
- 1. Download the TWRP image file based on your device model from above links to your computer. Rename the file to twrp.img and copy it to ADB & Fastboot folder.OK
- 2. Turn off your device and boot into fastboot mode. To do so, you need to completely turn off your device and boot it on by pressing and holding Volume Down + Power button simultaneously .OK
- 3. Now you will see a fastboot logo on your device. Take a USB cable and connect your device with PC.OK
- 4. Go to ADB & Fastboot folder. Here you need to press Shift key and right click anywhere in the folder. Now, select Open Command Window Here.OK
- 5. Now follow our simple guide on how to install TWRP Recovery via Fastboot.OK
- 6. Once TWRP recovery is successfully installed, you need to enter the below command to enter into TWRP mode.OK
fastboot boot twrp.img OK
- 7. Tap on Install button from recovery main menu and install the DisableForceEncryption_Treble.zip file. FAILED, still the Xiaomi bootloader with vol+&power, despite ok message after fastboot flash recovery recovery.img
- 8. Done! Reboot the system.
Thanks SacredDeviL666 for moving my post at the right place.
I am experiencing the same problem on Xiaomi Redmi 6A.
$ fastboot flash recovery trwp.img
OKAY
$ fastboot boot twrp.img
boots to Xiaomi bootloader
$fastboot reboot recovery
boots to Xiaomi recovery
Can anybody assist with this issue? Thanks....
Hello everyone.
Small Intro:
So, I bought Note 10 [Exynos] N970F. I wanted to use custom rom on it. I tried both Dr. Ketan's ROM and 420 Rom. Both of these roms were surely amazing and Dr. Ketan's rooting guide really helped in rooting and all things. Such a kind person to help for new comer.
As there are only these two roms at the moment and AOSP roms are either not available or very old with incomplete guide to flash. So after trying many different ways for flashing Generic System image (GSI) for my device. After series of failures, bootloops as I surely found some method to actually install GSI on N970F
Tested GSI
Havoc 3.8
Descendants
CrDroid v222 200816
Type of GSI to Use for our device:
ARM64-AB (As known as ARM64-bvN)
What's working:
Sim/IRC
Calls
Data/4g
Bluetooth
Wifi
Camera
Storage
Sensors
NFC/Location/Hotspot
Bugs:
MTP/USB connection not working
FingerPrint not working with Descendants Rom
(Can't confirm any further bugs. If you found please report so I can update thread)
Don't do anything without reading 4th Post (Disclaimer)
Your phone's internal storage will be wiped, deleting all of your data so make a backup
Prep:
1: Download firmware for your phone (Extract firmware and copy AP file to phone)
Either Use Frija or This website (Make account here, connect to GDrive and you can download from google server or IDM. Fast, Resume)
2: Download TWRP for your phone (It is better to have TWRP based on same base as is your phone's firmware download)
See here for TWRP (Usually has updated twrp) or see telegram of developer
(Extract twrp zip to have recovery.img. If it has different name, save it as "recovery.img", We will call it twrp-recovery.
3: Download Magisk Manager, install on phone
4: Patch AP file you copied to phone with Magisk Manager (Run magisk manager, --Install --> Select & Patch file --> Select AP)
A new file "Magisk-Patched.tar" will be saved in download folder. Copy it to PC. We will call it Patched-AP.
5: Open Patched-AP with 7-Zip. You should see files in it. (There should be a recovery.img in it) Now drag & drop twrp-recovery to 7-Zip window open Patched-AP. Wait for process, as it will replace stock recovery with twrp recovery. We now have an AP file with magisk & TWRP pre-patched.
Now we will use this updated Patched-AP
6: Download Latest Multi-disable from here
7: Download your desired GSI. Havoc GSI, CrDroid GSI, Descendants,Others
(Download ARM64-AB or ARM64-bVN) If you want Google apps it is better to download GSI with built-in GAPSS.
Steps to Follow:
(Enable USB Debugging on your phone, Turn on OEM Unlock option in developers option)
1: First Unlock Bootloader of your device (Boot to download mode-- Power off, Volume up + volume down and connect to pc)
2: Follow on-screen instructions to unlock bootloader (While in download mode -- long press volume up for unlock area, volume up to unlock)
Info: Now phone will do wipe and you should be back into system. Now due to some Samsung restriction, you must enable USB debugging again & see OEM unlock check if greyed out (untouchable). (You must do it as system gives download mode a signal to prevent issue with custom files flashing)
3: Boot to download mode, Press volume up. Connect to PC.
4: Run Odin, Select files, AP as Patched-UP we created, CSC as Home-CSC, CP and bootloader that your extracted.
(Uncheck auto-reboot in odin)
5: Start Flashing, wait for it to pass. Now we will boot to recovery from here
6: To boot into recovery, first we should exit download mode then boot to recovery during that process.
First Hold volume down + Power --> wait for screen to go black--> as soon as screen goes black--> leave all buttons --> now press Volume UP + Power --> Keep pressing until you boot into TWRP recovery.
7: Now Swipe to allow modifications --> Wipe --> Format Data --> type "yes" --> swipe. Wait for Wipe.
8: Now Click reboot --> Reboot to Recovery. Wait for Phone to boot back into TWRP recovery.
9: Again Swipe to allow modification. Connect to PC & Copy the Multi-Disable to phone.
10: Install Multi-Disabler --> Install --> Select Multi-Disable --> Swipe to flash. Wait for it. Reboot again to recovery.
11: Copy your downloaded GSI img to Phone. Select Wipe and do a factory reset.
12: Install GSI --> Install --> Select IMG --> Click on GSI image --> Select System partition to flash. It takes few seconds.
13: Now Reboot to System.
Phone Should be booted into new GSI installed
Credits:
IanMacD for Multidisable, TWRP
Dr.Ketan for excellent guides & such helpfulness
TopJohnWu for Magisk, patched AP
Respective GSI teams for their hard work
Reservation
2nd Reservation
Disclaimer:
Before proceeding, remember I’m not responsible for anything bad happened to your device by following this or any of my guide. I’m just trying to help. So always do it on your own risk…
Don’t blame me or Any other developer.
All tools here are developed by different personalities. I’m just providing a guide on using these tool. Always say thanks to me and them. And If possible, donate them. They really deserve it.
Thank you. Can i install on note 10 5G korea (N971N) with this method?
can i use this method with N971N ?