TWRP Recovery Moto-C-Plus (Source Build)
TWRP RECOVERY FOR MOTO C PLUS
(Source Build)
I have compiled twrp recovery for moto c plus from source.
LINK :- https://www.androidfilehost.com/?fid=889964283620774903
Instructions:-
The simple way to install twrp recovery on devices,, is to unlock the bootloader..and flash the recovery through fastboot..
step by step instructions by @shripad to flash the twrp on moto c plus WITHOUT unlocking the bootloader or lose any data.
[*]1.>> Download and extract files from here
note:after dowloading file..extract it and copy SuperSU-v2.82-201705271822.zip file in ur sd card,,,,DONT FORGET to flash SuperSU-v2.82-201705271822.zip file after write memory ,,otherwise your device will stuck at moto logo or soft brick
[*]2.>>open download tool(file provided in the above link,use provide sp_flash tool only because moto c plus have secure chip,need to authentication file,, so u cant flash through normal sp_flash tool) and load the download agent "MTK_AllInOne_DA.bin" & authentication file auth_sv5.auth from download_tool folder
[*]3>>.Load the scatter-file found in the provided file.. select preloader only, and select preloader only..but don't flash it.
[*]4.>> Click Alt + Ctrl + V to activate advanced mode in sp flash tool.
[*]5.>>Click on "window" up there and select "write mode"
[*]6.>> Change the Begin address to "0x2d80000" and click on "file path" and choose the TWRP-Moto_C-Plus.img from extracted provided zip file
[*]7. >>Click on "write Memeory", then Power off your device and remove the battery.. press and hold vol- button, then connect phone to pc via USB cable.. press &hold vol- key until pc detect...wait for Write memory ok window appears,, now your recovery is ready.
[*]8.>>Next insert ur battery, press vol+ and power button simultaneously.. than select recovery mode..& boot into recovery
[*]9.>>In twrp recovery select install and locate SuperSU-v2.82-201705271822.zip file in ur sd card and flash it..
[*]10.>>After successful flash... hit reboot device..
!!!! Enjoy!!!!
VISIT HERE FOR PORTED RECOVERY AND MORE GUIDE
https://forum.xda-developers.com/android/software-hacking/guide-flash-twrp-root-moto-c-plus-t3718668
credits: @JackShukla (me) for compiling recovery
@shr!pad for guide and tools
And all My friends who helped me..
Hit Thanks If You Like My Work..
Device Trees for moto c plus :- https://github.com/DhirajSurvase/android_device_moto_C_plus-XT1721
Kernel Trees for moto c plus:- https://github.com/DhirajSurvase/Kernel_Mod_Moto_C-plus
Vendor Trees For moto c plus:- https://github.com/DhirajSurvase/Vendor_moto_c-plus
Join Telegram Group For Moto C Plus Users
https://t.me/moto_c_plus
XDA:DevDB Information
TWRP Recovery Moto-C-Plus, Tool/Utility for all devices (see above for details)
Contributors
JackShukla, shr!pad
Version Information
Status: Stable
Created 2017-12-29
Last Updated 2017-12-29
Xt1725
Can you please be able to make this work on xt1725, I really need it and when I do the guide from shripard I get the DRAM error.
Mago6246 said:
Can you please be able to make this work on xt1725, I really need it and when I do the guide from shripard I get the DRAM error.
Click to expand...
Click to collapse
New post: https://forum.xda-developers.com/android/development/twrp-recovery-moto-c-plus-source-build-t3727007
The problem of the dram is answered by me in the new twrp post
Related
Hi
Any dev plz help.me
Am using mmx a35 bolt...how to.make it to boot in cwm.via hard.keys..it boots in stock even.after flashing cwm...quick.boot app helps to boot in cwm....plz explain about it
.i wanna know..whats wrong with.it
..its sc6820
Sent from my Micromax A35 using xda app-developers app
Credits : Prashanth Sadasivan
Credits : Prashanth Sadasivan
Credits : Prashanth Sadasivan
Here is it,guys! Clockwork Mod for Micromax A35.Only 1 Bug was found.Soon it will be rectified.
Device ; Micromax A35
Processor : Spectrum ***
Download Link for CWM recvery : Download it from here
Instuctions to Flash :
* Install the required packages like adb.
*Download Quickboot.apk and install it in your phone.
*Now Enable USB debugging in your phone by going to Settings->Development->USB Debugging (Skip this step if it is already enabled)
* Open Quickboot & click on Bootloader option.
*After sometime your phone will get stuck at the logo.
*Connect your phone to PC using USB cable.
*Now open the adb folder & inside that folder press & hold the Shift key + right click on blank space & choose Open Command Window Here.
*Now download the given img file,rename it to "recovery.img" and put it into the adb folder
*Now a black cmd window will open, there type fastboot devices
*This should display your device name in fastboot mode, if nothing is shown, then you have to check previous steps again.
*Now Type fastboot flash recovery recovery.img
*Within a sec the process will get over & it will install the CWM.
So Enjoy, you have successfully Install CWM Recovery.img on Micromax A35
Now you can check whether your CWM is working or not:-
Remove battery of your phone and reinsert.
Press Power and Volume Up key to boot into recovery mode.
If it get booted into recovery mode then it mean you have successfuly installed it, if not then try the process again.
Credits : Prashanth Sadasivan
No Dude It won't Redirect into Int CMW..
after installing the cmw..
ffabiomelo said:
credits : Prashanth sadasivan
credits : Prashanth sadasivan
credits : Prashanth sadasivan
here is it,guys! Clockwork mod for micromax a35.only 1 bug was found.soon it will be rectified.
Device ; micromax a35
processor : Spectrum ***
download link for cwm recvery : Download it from here
instuctions to flash :
* install the required packages like adb.
*download quickboot.apk and install it in your phone.
*now enable usb debugging in your phone by going to settings->development->usb debugging (skip this step if it is already enabled)
* open quickboot & click on bootloader option.
*after sometime your phone will get stuck at the logo.
*connect your phone to pc using usb cable.
*now open the adb folder & inside that folder press & hold the shift key + right click on blank space & choose open command window here.
*now download the given img file,rename it to "recovery.img" and put it into the adb folder
*now a black cmd window will open, there type fastboot devices
*this should display your device name in fastboot mode, if nothing is shown, then you have to check previous steps again.
*now type fastboot flash recovery recovery.img
*within a sec the process will get over & it will install the cwm.
So enjoy, you have successfully install cwm recovery.img on micromax a35
now you can check whether your cwm is working or not:-
remove battery of your phone and reinsert.
Press power and volume up key to boot into recovery mode.
If it get booted into recovery mode then it mean you have successfuly installed it, if not then try the process again.
Credits : Prashanth sadasivan
Click to expand...
Click to collapse
hahah
lollz
u dude dont know
i have fixed all bugs
and credits goes to me
akashujjainkar said:
hahah
lollz
u dude dont know
i have fixed all bugs
and credits goes to me
Click to expand...
Click to collapse
yah dude u made it
TWRP Recovery Moto-C-Plus (Source Build)
TWRP RECOVERY FOR MOTO C PLUS
(Source Build)
I have compiled twrp recovery for moto c plus from source.
LINK :- https://www.androidfilehost.com/?fid=889964283620774903
Instructions:-
The simple way to install twrp recovery on devices,, is to unlock the bootloader..and flash the recovery through fastboot..
step by step instructions by @shripad to flash the twrp on moto c plus WITHOUT unlocking the bootloader or lose any data.
[*]1.>> Download and extract files from here
note:after dowloading file..extract it and copy SuperSU-v2.82-201705271822.zip file in ur sd card,,,,DONT FORGET to flash SuperSU-v2.82-201705271822.zip file after write memory ,,otherwise your device will stuck at moto logo or soft brick
[*]2.>>open download tool(file provided in the above link,use provide sp_flash tool only because moto c plus have secure chip,need to authentication file,, so u cant flash through normal sp_flash tool) and load the download agent "MTK_AllInOne_DA.bin" & authentication file auth_sv5.auth from download_tool folder
[*]3>>.Load the scatter-file found in the provided file.. select preloader only, and select preloader only..but don't flash it.
[*]4.>> Click Alt + Ctrl + V to activate advanced mode in sp flash tool.
[*]5.>>Click on "window" up there and select "write mode"
[*]6.>> Change the Begin address to "0x2d80000" and click on "file path" and choose the TWRP-Moto_C-Plus.img from extracted provided zip file
[*]7. >>Click on "write Memeory", then Power off your device and remove the battery.. press and hold vol- button, then connect phone to pc via USB cable.. press &hold vol- key until pc detect...wait for Write memory ok window appears,, now your recovery is ready.
[*]8.>>Next insert ur battery, press vol+ and power button simultaneously.. than select recovery mode..& boot into recovery
[*]9.>>In twrp recovery select install and locate SuperSU-v2.82-201705271822.zip file in ur sd card and flash it..
[*]10.>>After successful flash... hit reboot device..
!!!! Enjoy!!!!
VISIT HERE FOR PORTED RECOVERY AND MORE GUIDE
https://forum.xda-developers.com/android/software-hacking/guide-flash-twrp-root-moto-c-plus-t3718668
credits: @JackShukla (me) for compiling recovery
@shr!pad for guide and tools
And all My friends who helped me..
Hit Thanks If You Like My Work..
Device Trees for moto c plus :- https://github.com/DhirajSurvase/android_device_moto_C_plus-XT1721
Kernel Trees for moto c plus:- https://github.com/DhirajSurvase/Kernel_Mod_Moto_C-plus
Vendor Trees For moto c plus:- https://github.com/DhirajSurvase/Vendor_moto_c-plus
Join Telegram Group For Moto C Plus Users
https://t.me/moto_c_plus
XDA:DevDB Information
TWRP Recovery Moto-C-Plus, Tool/Utility for all devices (see above for details)
Contributors
JackShukla, shr!pad
Version Information
Status: Stable
Created 2017-12-29
Last Updated 2017-12-29
Thread closed as duplicated with https://forum.xda-developers.com/android/development/twrp-recovery-moto-c-plus-source-build-t3727009
Hello everyone.
Small Intro:
So, I bought Note 10 [Exynos] N970F. I wanted to use custom rom on it. I tried both Dr. Ketan's ROM and 420 Rom. Both of these roms were surely amazing and Dr. Ketan's rooting guide really helped in rooting and all things. Such a kind person to help for new comer.
As there are only these two roms at the moment and AOSP roms are either not available or very old with incomplete guide to flash. So after trying many different ways for flashing Generic System image (GSI) for my device. After series of failures, bootloops as I surely found some method to actually install GSI on N970F
Tested GSI
Havoc 3.8
Descendants
CrDroid v222 200816
Type of GSI to Use for our device:
ARM64-AB (As known as ARM64-bvN)
What's working:
Sim/IRC
Calls
Data/4g
Bluetooth
Wifi
Camera
Storage
Sensors
NFC/Location/Hotspot
Bugs:
MTP/USB connection not working
FingerPrint not working with Descendants Rom
(Can't confirm any further bugs. If you found please report so I can update thread)
Don't do anything without reading 4th Post (Disclaimer)
Your phone's internal storage will be wiped, deleting all of your data so make a backup
Prep:
1: Download firmware for your phone (Extract firmware and copy AP file to phone)
Either Use Frija or This website (Make account here, connect to GDrive and you can download from google server or IDM. Fast, Resume)
2: Download TWRP for your phone (It is better to have TWRP based on same base as is your phone's firmware download)
See here for TWRP (Usually has updated twrp) or see telegram of developer
(Extract twrp zip to have recovery.img. If it has different name, save it as "recovery.img", We will call it twrp-recovery.
3: Download Magisk Manager, install on phone
4: Patch AP file you copied to phone with Magisk Manager (Run magisk manager, --Install --> Select & Patch file --> Select AP)
A new file "Magisk-Patched.tar" will be saved in download folder. Copy it to PC. We will call it Patched-AP.
5: Open Patched-AP with 7-Zip. You should see files in it. (There should be a recovery.img in it) Now drag & drop twrp-recovery to 7-Zip window open Patched-AP. Wait for process, as it will replace stock recovery with twrp recovery. We now have an AP file with magisk & TWRP pre-patched.
Now we will use this updated Patched-AP
6: Download Latest Multi-disable from here
7: Download your desired GSI. Havoc GSI, CrDroid GSI, Descendants,Others
(Download ARM64-AB or ARM64-bVN) If you want Google apps it is better to download GSI with built-in GAPSS.
Steps to Follow:
(Enable USB Debugging on your phone, Turn on OEM Unlock option in developers option)
1: First Unlock Bootloader of your device (Boot to download mode-- Power off, Volume up + volume down and connect to pc)
2: Follow on-screen instructions to unlock bootloader (While in download mode -- long press volume up for unlock area, volume up to unlock)
Info: Now phone will do wipe and you should be back into system. Now due to some Samsung restriction, you must enable USB debugging again & see OEM unlock check if greyed out (untouchable). (You must do it as system gives download mode a signal to prevent issue with custom files flashing)
3: Boot to download mode, Press volume up. Connect to PC.
4: Run Odin, Select files, AP as Patched-UP we created, CSC as Home-CSC, CP and bootloader that your extracted.
(Uncheck auto-reboot in odin)
5: Start Flashing, wait for it to pass. Now we will boot to recovery from here
6: To boot into recovery, first we should exit download mode then boot to recovery during that process.
First Hold volume down + Power --> wait for screen to go black--> as soon as screen goes black--> leave all buttons --> now press Volume UP + Power --> Keep pressing until you boot into TWRP recovery.
7: Now Swipe to allow modifications --> Wipe --> Format Data --> type "yes" --> swipe. Wait for Wipe.
8: Now Click reboot --> Reboot to Recovery. Wait for Phone to boot back into TWRP recovery.
9: Again Swipe to allow modification. Connect to PC & Copy the Multi-Disable to phone.
10: Install Multi-Disabler --> Install --> Select Multi-Disable --> Swipe to flash. Wait for it. Reboot again to recovery.
11: Copy your downloaded GSI img to Phone. Select Wipe and do a factory reset.
12: Install GSI --> Install --> Select IMG --> Click on GSI image --> Select System partition to flash. It takes few seconds.
13: Now Reboot to System.
Phone Should be booted into new GSI installed
Credits:
IanMacD for Multidisable, TWRP
Dr.Ketan for excellent guides & such helpfulness
TopJohnWu for Magisk, patched AP
Respective GSI teams for their hard work
Reservation
2nd Reservation
Disclaimer:
Before proceeding, remember I’m not responsible for anything bad happened to your device by following this or any of my guide. I’m just trying to help. So always do it on your own risk…
Don’t blame me or Any other developer.
All tools here are developed by different personalities. I’m just providing a guide on using these tool. Always say thanks to me and them. And If possible, donate them. They really deserve it.
Thank you. Can i install on note 10 5G korea (N971N) with this method?
can i use this method with N971N ?
I DON'T OWN THE DEVICE, AND THAT TWRP ISN'T TESTED YET
DOWNLOAD MODE (For Recovery Step)
• Make sure to have bootloader unlocked
1. Put USB driver
2. Shutdown your F41
3. Press & hold both vol + vol - keys
Recovery Download
- Download here
FLASHING RECOVERY
1. Download and open Odin tool
2. Click in AP Tab and select TWRP_3.4.0-0_F41.tar file
3. Click on start and wait
4. Flashed correctly you see pass message
Sources
Device Tree (Staging yet)
Team Win Recovery Project: For nice development and good custom recovery
Device Group
WARNING
If the TWRP don't boot, let me know via Telegram! I'm working in kernel, you can see here: https://github.com/samsungexynos9810/android_kernel_samsung_f41/commits/master, remember: It's broken by Samsung.
Brother Please explain me about , How to unlock bootloader for samsung f41? Please reply me brother.
Hi Poco x3 gt brick please help me!
Copied from another post, works for me
Hello! (Read it fully)
I had the same problem, but i finally got it. First download the 12.5.7.0 rom from this page (Fastboot rom)
Xiaomi Poco X3 GT (chopin) Stock Firmware Collections
On this page, we will share all the latest Xiaomi Poco X3 GT (codenamed chopin) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash
www.getdroidtips.com
Then, go to Mi Flash Tool (also download from that page). The version you need is 20210226
Then unzip the rom as many times as it needs, and copy it (the most decompressed folder) to the desktop. Then, launch Mi Flash tool and install the drivers in drivers page. In the right corner you need to select "Clean all". And.... FLASH!
It solved my problem. I had the same as you. If your computer doesn't recognize your device, stay in fastboot 30 minutes and it will turn off automatically (with usb unplugged) or if it says no digest file found, turning off in 5 seconds turn it off.
I hope this can solve your problem.
Edit: Then update the firmware to 12.5.8.0 OTA way. Don't obey people saying stupidities like "Buy a new one". This is a forum, to help people, and if u don't know the solution, DON'T SAY ANYTHING
Bye
download mtk bypass tool and spflashtoll , install mtk preloader driver , open mtk bypass tool and spflash tool , open scatter file from folder image( from unziped fastboot firmware folder), then click disable auth from bypass tool and put the device and hold vol up + vol down , when seccus click download from spflashtool good luck
Welp. here's my take on how i did it.
Download All Links here:
SP Flash Tool: https://mega.nz/file/G4VnxTKa#_uq8YdL3VS-ilO_cVIDv2zb4RRiVwCgnLlK_xS4uJo8
MTK META Utility: https://mega.nz/file/u4cwzRgL#n15IAtntMiPz_W2wB1Yb6j8yXvb86V2dzLesT6nOnnY
POCO X3 GT Original Firmware + Tutorial: https://romprovider.com/poco-x3-gt-firmware-support/
(MEGA Links are mine for easy download and no corruption)
Download the firmware first before the tools
After downloading all the files above, do this
1. Extract the firmware into your desktop
2. Extract SP Flash Tool into your desktop
3. Run SP Flash Tool and MTK META UTILITY
4. On SP Flash Tool, Locate for Scatter Loading file
View attachment 5632675
Press Choose
5. Locate the scatter file in your extracted firmware
View attachment 5632677
SP Flash Tool will Look like this
View attachment 5632681
6. Run MTK META UtilityView attachment 5632683
7. Press "Disable Auth
View attachment 5632685
8. Long press VOL Up And connect to pc (Check Device Manager Until you see Mediatek USB Port (COMx). If you didn't see it, Download the Mediatek Drivers: https://androidfilehost.com/?w=files&flid=216849 )
If it detected, It will say this on logs:
View attachment 5632687
9. Press Download (NOTE: Just select DOWNLOAD ONLY. DO NOT SELECT "FORMAT-DOWNLOAD" or your IMEI and MAC ADDRESS WILL BE GONE FOREVER!!!)
View attachment 5632689
have some coffee while flashing
If it succeeded, the OK Window will POPUP
View attachment 5632691
Long press power button to reboot until the poco logo shows up. It will reboot to FASTBOOT (aka. Bootloader)
While you're at it and if you have platform_tools,
10. Copy contents in platform tools and transfer to the firmware folder (or copy the insides of the firmware folder and paste it in platform_tools folder)
it will look like this
View attachment 5632693
(don't mind the gms.apk cause i accidentally added there but there's no gms.apk on yours)
11. Run flash_all.bat and wait until the phone reboots.
if it rebooted, it should've reboot to miui.
that's how i restored my phone.
pls reply if it works to you too...
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Luizinho22 said:
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Click to expand...
Click to collapse
try flashing one by one
https://www.google.com/url?sa=t&source=web&rct=j&url=https://m.youtube.com/watch%3Fv%3DdbItjjjXwdk&ved=2ahUKEwizn5PGo6T4AhVFRmwGHQtIB_sQwqsBegQIBRAD&usg=AOvVaw1crzkjvWepJYX8dBLp6njt
No, error continued
Luizinho22 said:
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Click to expand...
Click to collapse
oh. i'll research
Ok
Luizinho22 said:
No, error continued.
Click to expand...
Click to collapse
is your device global? or your device is just bootloader locked???
Global
the bootloader is blocked
Luizinho22 said:
the bootloader is blocked
Click to expand...
Click to collapse
if your bootloader is locked, you can't do anything... unless if you find a fix
Luizinho22 said:
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Click to expand...
Click to collapse
worked for me same model , flash one by one , after flashing one then unchek it and go for the next one ,skip the ones with errors , keep going to the last one , when finish close and disconect ,now you should be able to enter fastboot mode, and now go to mi flash tool, and flash the official global rom ,it should be succed and boot your phone