Question POCO X3 GT BRİCK - Poco X3 GT (Redmi Note 10 Pro 5G)

Hi Poco x3 gt brick please help me!

---

Copied from another post, works for me
Hello! (Read it fully)
I had the same problem, but i finally got it. First download the 12.5.7.0 rom from this page (Fastboot rom)
Xiaomi Poco X3 GT (chopin) Stock Firmware Collections
On this page, we will share all the latest Xiaomi Poco X3 GT (codenamed chopin) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash
www.getdroidtips.com
Then, go to Mi Flash Tool (also download from that page). The version you need is 20210226
Then unzip the rom as many times as it needs, and copy it (the most decompressed folder) to the desktop. Then, launch Mi Flash tool and install the drivers in drivers page. In the right corner you need to select "Clean all". And.... FLASH!
It solved my problem. I had the same as you. If your computer doesn't recognize your device, stay in fastboot 30 minutes and it will turn off automatically (with usb unplugged) or if it says no digest file found, turning off in 5 seconds turn it off.
I hope this can solve your problem.
Edit: Then update the firmware to 12.5.8.0 OTA way. Don't obey people saying stupidities like "Buy a new one". This is a forum, to help people, and if u don't know the solution, DON'T SAY ANYTHING
Bye

---

download mtk bypass tool and spflashtoll , install mtk preloader driver , open mtk bypass tool and spflash tool , open scatter file from folder image( from unziped fastboot firmware folder), then click disable auth from bypass tool and put the device and hold vol up + vol down , when seccus click download from spflashtool good luck

---

Welp. here's my take on how i did it.
Download All Links here:
SP Flash Tool: https://mega.nz/file/G4VnxTKa#_uq8YdL3VS-ilO_cVIDv2zb4RRiVwCgnLlK_xS4uJo8
MTK META Utility: https://mega.nz/file/u4cwzRgL#n15IAtntMiPz_W2wB1Yb6j8yXvb86V2dzLesT6nOnnY
POCO X3 GT Original Firmware + Tutorial: https://romprovider.com/poco-x3-gt-firmware-support/
(MEGA Links are mine for easy download and no corruption)
Download the firmware first before the tools
After downloading all the files above, do this
1. Extract the firmware into your desktop
2. Extract SP Flash Tool into your desktop
3. Run SP Flash Tool and MTK META UTILITY
4. On SP Flash Tool, Locate for Scatter Loading file
View attachment 5632675
Press Choose
5. Locate the scatter file in your extracted firmware
View attachment 5632677
SP Flash Tool will Look like this
View attachment 5632681
6. Run MTK META UtilityView attachment 5632683
7. Press "Disable Auth
View attachment 5632685
8. Long press VOL Up And connect to pc (Check Device Manager Until you see Mediatek USB Port (COMx). If you didn't see it, Download the Mediatek Drivers: https://androidfilehost.com/?w=files&flid=216849 )
If it detected, It will say this on logs:
View attachment 5632687
9. Press Download (NOTE: Just select DOWNLOAD ONLY. DO NOT SELECT "FORMAT-DOWNLOAD" or your IMEI and MAC ADDRESS WILL BE GONE FOREVER!!!)
View attachment 5632689
have some coffee while flashing
If it succeeded, the OK Window will POPUP
View attachment 5632691
Long press power button to reboot until the poco logo shows up. It will reboot to FASTBOOT (aka. Bootloader)
While you're at it and if you have platform_tools,
10. Copy contents in platform tools and transfer to the firmware folder (or copy the insides of the firmware folder and paste it in platform_tools folder)
it will look like this
View attachment 5632693
(don't mind the gms.apk cause i accidentally added there but there's no gms.apk on yours)
11. Run flash_all.bat and wait until the phone reboots.
if it rebooted, it should've reboot to miui.
that's how i restored my phone.
pls reply if it works to you too...

---

Hello, I need help after pressing download in sp flash after a few seconds of the following error message:

---

Luizinho22 said:
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Click to expand...
Click to collapse
try flashing one by one
https://www.google.com/url?sa=t&source=web&rct=j&url=https://m.youtube.com/watch%3Fv%3DdbItjjjXwdk&ved=2ahUKEwizn5PGo6T4AhVFRmwGHQtIB_sQwqsBegQIBRAD&usg=AOvVaw1crzkjvWepJYX8dBLp6njt

---

No, error continued

---

Luizinho22 said:
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Click to expand...
Click to collapse
oh. i'll research

---

Ok

---

Luizinho22 said:
No, error continued.
Click to expand...
Click to collapse
is your device global? or your device is just bootloader locked???

---

Global

---

the bootloader is blocked

---

Luizinho22 said:
the bootloader is blocked
Click to expand...
Click to collapse
if your bootloader is locked, you can't do anything... unless if you find a fix

---

Luizinho22 said:
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Click to expand...
Click to collapse
worked for me same model , flash one by one , after flashing one then unchek it and go for the next one ,skip the ones with errors , keep going to the last one , when finish close and disconect ,now you should be able to enter fastboot mode, and now go to mi flash tool, and flash the official global rom ,it should be succed and boot your phone