Hi
Any dev plz help.me
Am using mmx a35 bolt...how to.make it to boot in cwm.via hard.keys..it boots in stock even.after flashing cwm...quick.boot app helps to boot in cwm....plz explain about it
.i wanna know..whats wrong with.it
..its sc6820
Sent from my Micromax A35 using xda app-developers app
Credits : Prashanth Sadasivan
Credits : Prashanth Sadasivan
Credits : Prashanth Sadasivan
Here is it,guys! Clockwork Mod for Micromax A35.Only 1 Bug was found.Soon it will be rectified.
Device ; Micromax A35
Processor : Spectrum ***
Download Link for CWM recvery : Download it from here
Instuctions to Flash :
* Install the required packages like adb.
*Download Quickboot.apk and install it in your phone.
*Now Enable USB debugging in your phone by going to Settings->Development->USB Debugging (Skip this step if it is already enabled)
* Open Quickboot & click on Bootloader option.
*After sometime your phone will get stuck at the logo.
*Connect your phone to PC using USB cable.
*Now open the adb folder & inside that folder press & hold the Shift key + right click on blank space & choose Open Command Window Here.
*Now download the given img file,rename it to "recovery.img" and put it into the adb folder
*Now a black cmd window will open, there type fastboot devices
*This should display your device name in fastboot mode, if nothing is shown, then you have to check previous steps again.
*Now Type fastboot flash recovery recovery.img
*Within a sec the process will get over & it will install the CWM.
So Enjoy, you have successfully Install CWM Recovery.img on Micromax A35
Now you can check whether your CWM is working or not:-
Remove battery of your phone and reinsert.
Press Power and Volume Up key to boot into recovery mode.
If it get booted into recovery mode then it mean you have successfuly installed it, if not then try the process again.
Credits : Prashanth Sadasivan
No Dude It won't Redirect into Int CMW..
after installing the cmw..
ffabiomelo said:
credits : Prashanth sadasivan
credits : Prashanth sadasivan
credits : Prashanth sadasivan
here is it,guys! Clockwork mod for micromax a35.only 1 bug was found.soon it will be rectified.
Device ; micromax a35
processor : Spectrum ***
download link for cwm recvery : Download it from here
instuctions to flash :
* install the required packages like adb.
*download quickboot.apk and install it in your phone.
*now enable usb debugging in your phone by going to settings->development->usb debugging (skip this step if it is already enabled)
* open quickboot & click on bootloader option.
*after sometime your phone will get stuck at the logo.
*connect your phone to pc using usb cable.
*now open the adb folder & inside that folder press & hold the shift key + right click on blank space & choose open command window here.
*now download the given img file,rename it to "recovery.img" and put it into the adb folder
*now a black cmd window will open, there type fastboot devices
*this should display your device name in fastboot mode, if nothing is shown, then you have to check previous steps again.
*now type fastboot flash recovery recovery.img
*within a sec the process will get over & it will install the cwm.
So enjoy, you have successfully install cwm recovery.img on micromax a35
now you can check whether your cwm is working or not:-
remove battery of your phone and reinsert.
Press power and volume up key to boot into recovery mode.
If it get booted into recovery mode then it mean you have successfuly installed it, if not then try the process again.
Credits : Prashanth sadasivan
Click to expand...
Click to collapse
hahah
lollz
u dude dont know
i have fixed all bugs
and credits goes to me
akashujjainkar said:
hahah
lollz
u dude dont know
i have fixed all bugs
and credits goes to me
Click to expand...
Click to collapse
yah dude u made it
Related
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
ramkumarkr666 said:
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
Click to expand...
Click to collapse
flash kernel usiing fastboot (not flashmode)
download this, then extract. (u need to have Android sdk installed, if not search google & install) http://www33.zippyshare.com/v/22861267/file.html
1. pur kernel into the fastboot folder
2. power off device. press & HOLD vol up button when u cannect to pc. the blue led should lit. leave phone
3. go back to fastboot folder click in empty space, then hold 'shift' & press right mouse button --> ''open console here''
4 now u should have a black box (cmd)
5 type ''fastboot flash boot boot.img'' (without quotes, & remeber the red text is the name of the kernel may u have to rename it)
6. fast boot should tell u all done, ok.
7. boot in CWM
ramkumarkr666 said:
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
Click to expand...
Click to collapse
download flash tool and install it ...
switch off phone
connect the usb to pc and phone by holding volume up key NOW blue led light up...u can see flash tool notify that device connected in fastboot mode..
Now press the lighting key select fastboot ...then select kernel to flash...
DONE...
Note: phone driver must be installed
RECOVERY FOR ACE 4 SM-G316HU
____CWM RECOVERY____
based on v.6.0.3.x
Installation 1 :
VIA TERMINAL EMULATOR (Just for rooted phone)
download file I've provided below.
move/save in extSdCard
open terminal emulator
Type
Code:
su (enter)
type
Code:
dd if =/recovery.img of =/storage/extSdCard/dev/block/platform/sprd-sdhci. 3/by-name/RECOVERY (enter)
wait until the process is complete, if it is. ..
type
Code:
reboot reovery (enter)
completed..
Installation 2 :
(Just for unrooted phone)
Download odin and extract
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until detected on odin
Add the recovery_vivalto5mve3g.tar.md5 file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Wait until the flashing process is complete
Link :
recovery for terminal emulator
recovery for odin
Source :- https://github.com/AndiNR/android_device_samsung_vivalto5mve3g
bug :
in recovery vol down not work ,, use home button for down
Let me know if you find it
Special thanks to : Allah SWT and Nabi Muhammad SAW
CREDITS :
cyanogenmod team
@CTXz for help
andii_nr
my mother phone for test
IF YOU WANNA RESHARE THIS RECOVERY, PLEASE FOLLOW THIS RULES :
DON'T USE SHORTENER LINK (i.e. adfly, adfoc, etc)
DONT REUPLOAD MY RECOVERY BEFORE ASKING PERMISSIONS
Do not forget to donate/hit thank If you like my work
reserved #1
May it work on a *316 ML?
Edit:
stuck on first logo...
zenug said:
May it work on a *316 ML?
Edit:
stuck on first logo...
Click to expand...
Click to collapse
I also had the same question, and I can't test it since the download button from Yandex Disk doesn't work.
Please re-upload the images somewhere else, e.g. in a NextCloud instance or Mega.nz
EDIT: This was in my GNU/Linux PC running Iceweasel (Firefox-based) and with some extensions like uBlock, NoScript (but enabled JS), Disconnect, and HTTPS everywhere
works on Galaxy Ace 4 Neo SM-G136ML
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
damulag1234 said:
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
Click to expand...
Click to collapse
Hi
Do Flash a New Rom of your Phone with Flashtools v 0.9.18.5
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Sajad Askari said:
Hi
Do Flash a New Rom of your Phone with Flashtools v 0.9.18.5
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Click to expand...
Click to collapse
my z2 is turned off and i cant open it to allow usb debugging sir,
what should I do? i think my z2 got brick
damulag1234 said:
my z2 is turned off and i cant open it to allow usb debugging sir,
what should I do? i think my z2 got brick
Click to expand...
Click to collapse
No problem
Just install Flashtools V 0.9.18.5
And install Your Drivers
And Do flash Your Rom
No need usb Debugging
Are You Can Flash Stock ROM?
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Unless you've messed up the TA partition, our phones are pretty hard to brick. If you hold vol_up then plug in USB to your PC, it should boot into flash mode with a blue LED. That means you can use Flashtool to flash an FTF file to the phone, effectively factory program it.
Si_NZ said:
Unless you've messed up the TA partition, our phones are pretty hard to brick. If you hold vol_up then plug in USB to your PC, it should boot into flash mode with a blue LED. That means you can use Flashtool to flash an FTF file to the phone, effectively factory program it.
Click to expand...
Click to collapse
my z2 is turned off and i already flashed but i used a wrong firmware.
my z2 now is not opening or booting and it say The software update failed
what should i do?
damulag1234 said:
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
Click to expand...
Click to collapse
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://www.androidfilehost.com/?fid=24521665358595410
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?pref=2&pli=1
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Mostafa Sherif said:
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://mega.nz/#!7942XJjI!9gurv7k3P...RTiDPeArhwjXsG XB9c
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/dow...41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img.html
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn...ew?usp=sharing
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Click to expand...
Click to collapse
i need the key to download can you provide it for me?
damulag1234 said:
i need the key to download can you provide it for me?
Click to expand...
Click to collapse
Ok, no problem but for which one?!
Mostafa Sherif said:
Ok, no problem but for which one?!
Click to expand...
Click to collapse
sir can you provide me all the needed files? the download links are not working. and the other needs key to be downloaded
damulag1234 said:
sir can you provide me all the needed files? the download links are not working. and the other needs key to be downloaded
Click to expand...
Click to collapse
Sorry for this problem,, but i have edited my post and provided you with a new alternative link (for Minimal ADB and Fastboot) see it again.
and i will check the other links now and if any another link is unavailable i will change it for you.
Mostafa Sherif said:
Ok, no problem but for which one?!
Click to expand...
Click to collapse
1. download link need key
2. download link is not working
3. downloaded
5.download link is not working
damulag1234 said:
1. download link need key
2. download link is not working
3. downloaded
5.download link is not working
Click to expand...
Click to collapse
Check now all the download links again,, it should works now normally
Tell me if there is any another thing
Sorry for that
Mostafa Sherif said:
Check now all the download links again,, it should works now normally
Tell me if there is any another thing
Sorry for that
Click to expand...
Click to collapse
how to use md5 file? do i just need to paste it?
damulag1234 said:
how to use md5 file? do i just need to paste it?
Click to expand...
Click to collapse
Where do you get these files?? i didn't tell you to use any md5 file. and there is no md5 file to use it and if you have found any md5 file just ignore it and continue doing these steps only.
Do the steps as i write it and your phone will boot again successfully
Mostafa Sherif said:
Where do you get these files?? i didn't tell you to use any md5 file. and there is no md5 file to use it and if you have found any md5 file just ignore it.
Do the steps as i write it and your phone will boot again successfully
Click to expand...
Click to collapse
the twrp file is an md5 file sir
damulag1234 said:
the twrp file is an md5 file sir
Click to expand...
Click to collapse
Download the twrp.img from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
After you download it you will see it's name is twrp-3.0.2-0-sirius.img
Then continue my steps normally and tell me if there is any problem
Mostafa Sherif said:
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://www.androidfilehost.com/?fid=24521665358595410
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?pref=2&pli=1
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Click to expand...
Click to collapse
sir i cant understand the instruction on number 8 and 9
would you mind explaining it to me? thanks a lot
damulag1234 said:
sir i cant understand the instruction on number 8 and 9
would you mind explaining it to me? thanks a lot
Click to expand...
Click to collapse
No problem In step 8 first: Go to the path i told you in the description then press and hold shift button from keyboard and then press right click with mouse at any empty space in the folder,, a menu will pop up then you will find an option named (Open command window here) select it, then a command window will open.
I wish i had descriped it to you exactly and tell me if you successed to make it
If you do step 8 correctly then continue to step 9.. in step 9, you have to write the commands that i give it to you in the command window that have been opened in step 8.
The commands that i had bold it
Mostafa Sherif said:
No problem In step 8 first: Go to the path i told you in the description then press and hold shift button from keyboard and then press right click with mouse at any empty space in the folder,, a menu will pop up then you will find an option named (Open command window here) select it, then a command window will open.
I wish i had descriped it to you exactly and tell me if you successed to make it
If you do step 8 correctly then continue to step 9.. in step 9, you have to write the commands that i give it to you in the command window that have been opened in step 8.
The commands that i had bold it
Click to expand...
Click to collapse
i followed it what about the number 10? should i put it before i enter the command from number 9?
UnOfficial Twrp.img Micromax Canvas 6 E485
i had build an UnOfficial Twrp.img Micromax Canvas 6 E485, and i had flash it, and its work.
Friends you can download from this link :
Link 1
www*dropbox*com/s/3ggpddxyer9yqgf/twrp_micromax-canvas%206%20E485-mt6753.img?dl=0&fbclid=IwAR3AnUSxARAGPJHABy88eDuW1xJuuI_LPSnHBEfB6A5TSp_Yj9Jxr2jyQPc
Mirror :
www*mediafire*com/file/aw1d2898thl4rb3/twrp_micromax_Can6_e485.img/file
you can flash it by fastboot mode from PC. Fastboot mode how to, just seacrh in Google.
To Enter Recovery mode Micromax Just poweroff you phone, Push Volume Down + Power, after :
-the Recovery -fastboot -bootloader >>WiLL COME,
then release the power button,
use the Volume Down to select/enter Fastboot this in middle menu).
Then Push Volume Up to select/enter the Fasboot,
connect your cable to PC, then use terminal/cmd to push the TWRP.img
"Sorry for my bad english".
----------------------------------------
Easy Click Link!
Link 1
Click here to download
Mirror
Click here to download
Peak.Krittin said:
Easy Click Link!
Link 1
Click here to download
Mirror
Click here to download
Click to expand...
Click to collapse
thx. for create that short link.
No Problem!
can you make a video for how to flash this file?
micromaxfans said:
UnOfficial Twrp.img Micromax Canvas 6 E485
i had build an UnOfficial Twrp.img Micromax Canvas 6 E485, and i had flash it, and its work.
Friends you can download from this link :
Link 1
www*dropbox*com/s/3ggpddxyer9yqgf/twrp_micromax-canvas%206%20E485-mt6753.img?dl=0&fbclid=IwAR3AnUSxARAGPJHABy88eDuW1xJuuI_LPSnHBEfB6A5TSp_Yj9Jxr2jyQPc
Mirror :
www*mediafire*com/file/aw1d2898thl4rb3/twrp_micromax_Can6_e485.img/file
you can flash it by fastboot mode from PC. Fastboot mode how to, just seacrh in Google.
To Enter Recovery mode Micromax Just poweroff you phone, Push Volume Down + Power, after :
-the Recovery -fastboot -bootloader >>WiLL COME,
then release the power button,
use the Volume Down to select/enter Fastboot this in middle menu).
Then Push Volume Up to select/enter the Fasboot,
connect your cable to PC, then use terminal/cmd to push the TWRP.img
"Sorry for my bad english".
----------------------------------------
Click to expand...
Click to collapse
Are you sure it wouldn't hardbrick the device...I have been trying several twrp's claiming to support it but everytime I had it brick
Method for Rooting Your REALME U1!!
Now here is the full procedure of rooting ur REALME U1
Read this carefully!!
I am not responsible if anything happens to your phone!!I'm not responsible if it gets bricked or dies
Thanks to:
Thanks to BestTipsYT (Its Me)for extracting system and providing boot.img, recovery etc!
Thanks to BestTipsYT (Its Me) for patching boot image!
Thanks to BestTipsYT (Its Me) for testing Magisk
Thanks to Amit for The Suggestion Of This Method!!} - In Telegram
!!!!!!!!!!!But Before Doing This BootLoader Needs To Be Unlocked Then Proceed To This Process!!!!!!!!!!!!!!
How to flash Magisk boot image!!
•First : Enable Usb Debugging and Oem unlock in Developer options
•Second : Connect ur phone to ur PC "You may get a request to authorize USB debugging on the device, accept it."
•Third : Install ADB on ur PC
•Fourth : Copy the Magisk boot image into ur PC in ADB folder.
•Fifth : Now Click this in abd folder - Shift + Right click and select "Open Powershell or Open ADB "
•Sixth : Use the following command and boot into fastboot mode :
adb devices(to check if ur phone is connected)
Then :
adb reboot bootloader
After that :
fastboot flash boot rootboot.img
•After this reboot ur phone using manually.(By Holding Vol Up + Power Button)
Then install Magisk Manager
Here is the Link to download Magisk boot image : https://mega.nz/#!icdH1ABY!DWhCimsvZfYXKlD7WwP-nNeKe7UoYyPneq0N8B9y2uE
Here is the Link to download Magisk Manager : https://mega.nz/#!mck1UYID!DjPXl9SY-BLJdMtErcLWnC_v9eExt5r5PXUsPGUMmy8
If u guys have any doubt about how to install boot image using ADB , then u can Google it or YouTube it.
Or Alternatively Contact Me In MOD Edit:- Links Removed
NOTE!! IF YOU UPLOAD IT ON YOUTUBE OR WEBSITE WITHOUT GIVING CREDITS THEN I WILL GIVE YOU COPYRIGHT STRIKE TO END YOUR CARRIER OF YOUTUBE OR SITE!!THIS WORK BELONGS TO ME!!!!
Thanks man
Did you unlock bootloader from fastboot mode before doing this?
Sent from my Infinix X573 using Tapatalk
Skyhuppa said:
Thanks man
Did you unlock bootloader from fastboot mode before doing this?
Sent from my Infinix X573 using Tapatalk
Click to expand...
Click to collapse
ya bro its needed:good::good::good:
Thank you good friend
Sent from my Infinix X573 using Tapatalk
Skyhuppa said:
Thank you good friend
Sent from my Infinix X573 using Tapatalk
Click to expand...
Click to collapse
:good::good::good::good:
yuvarajv952 said:
:good::good::good::good:
Click to expand...
Click to collapse
i just got my phone bricked, followed all the steps, some help?
aayamz said:
i just got my phone bricked, followed all the steps, some help?
Click to expand...
Click to collapse
what was the process u done bro..???
bricked my phone trying this!
yuvarajv952 said:
Method for Rooting Your REALME U1!!
Now here is the full procedure of rooting ur REALME U1
Read this carefully!!
I am not responsible if anything happens to your phone!!I'm not responsible if it gets bricked or dies
Thanks to:
Thanks to BestTipsYT (Its Me)for extracting system and providing boot.img, recovery etc!
Thanks to BestTipsYT (Its Me) for patching boot image!
Thanks to BestTipsYT (Its Me) for testing Magisk
Thanks to Amit for The Suggestion Of This Method!!} - In Telegram
!!!!!!!!!!!But Before Doing This BootLoader Needs To Be Unlocked Then Proceed To This Process!!!!!!!!!!!!!!
How to flash Magisk boot image!!
•First : Enable Usb Debugging and Oem unlock in Developer options
•Second : Connect ur phone to ur PC "You may get a request to authorize USB debugging on the device, accept it."
•Third : Install ADB on ur PC
•Fourth : Copy the Magisk boot image into ur PC in ADB folder.
•Fifth : Now Click this in abd folder - Shift + Right click and select "Open Powershell or Open ADB "
•Sixth : Use the following command and boot into fastboot mode :
adb devices(to check if ur phone is connected)
Then :
adb reboot bootloader
After that :
fastboot flash boot rootboot.img
•After this reboot ur phone using manually.(By Holding Vol Up + Power Button)
Then install Magisk Manager
If u guys have any doubt about how to install boot image using ADB , then u can Google it or YouTube it.
Or Alternatively Contact Me In MOD Edit:- Links Removed
NOTE!! IF YOU UPLOAD IT ON YOUTUBE OR WEBSITE WITHOUT GIVING CREDITS THEN I WILL GIVE YOU COPYRIGHT STRIKE TO END YOUR CARRIER OF YOUTUBE OR SITE!!THIS WORK BELONGS TO ME!!!!
Click to expand...
Click to collapse
Hello, i did exactly how you mentioned and now my phone does not turn on.
Got my phone bricked. It doesn't start. Please test if it is still working for realme U1 after the latest color OS update.
Phone bricked
FYI i don't think its working after the latest update.
Will this work for colorOS 5.2 and android 8.1.0?
---------- Post added at 06:53 PM ---------- Previous post was at 06:51 PM ----------
yuvarajv952 said:
Method for Rooting Your REALME U1!!
Now here is the full procedure of rooting ur REALME U1
Read this carefully!!
I am not responsible if anything happens to your phone!!I'm not responsible if it gets bricked or dies
Thanks to:
Thanks to BestTipsYT (Its Me)for extracting system and providing boot.img, recovery etc!
Thanks to BestTipsYT (Its Me) for patching boot image!
Thanks to BestTipsYT (Its Me) for testing Magisk
Thanks to Amit for The Suggestion Of This Method!!} - In Telegram
!!!!!!!!!!!But Before Doing This BootLoader Needs To Be Unlocked Then Proceed To This Process!!!!!!!!!!!!!!
How to flash Magisk boot image!!
•First : Enable Usb Debugging and Oem unlock in Developer options
•Second : Connect ur phone to ur PC "You may get a request to authorize USB debugging on the device, accept it."
•Third : Install ADB on ur PC
•Fourth : Copy the Magisk boot image into ur PC in ADB folder.
•Fifth : Now Click this in abd folder - Shift + Right click and select "Open Powershell or Open ADB "
•Sixth : Use the following command and boot into fastboot mode :
adb devices(to check if ur phone is connected)
Then :
adb reboot bootloader
After that :
fastboot flash boot rootboot.img
•After this reboot ur phone using manually.(By Holding Vol Up + Power Button)
Then install Magisk Manager
Here is the Link to download Magisk boot image : https://mega.nz/#!icdH1ABY!DWhCimsvZfYXKlD7WwP-nNeKe7UoYyPneq0N8B9y2uE
Here is the Link to download Magisk Manager : https://mega.nz/#!mck1UYID!DjPXl9SY-BLJdMtErcLWnC_v9eExt5r5PXUsPGUMmy8
If u guys have any doubt about how to install boot image using ADB , then u can Google it or YouTube it.
Or Alternatively Contact Me In MOD Edit:- Links Removed
NOTE!! IF YOU UPLOAD IT ON YOUTUBE OR WEBSITE WITHOUT GIVING CREDITS THEN I WILL GIVE YOU COPYRIGHT STRIKE TO END YOUR CARRIER OF YOUTUBE OR SITE!!THIS WORK BELONGS TO ME!!!!
Click to expand...
Click to collapse
Will this work on Color OS 5.2 and android 8.1.0?
Guys the main reason your phone got bricked is due to trying to root it from COS 5.2. COS 6.0 Will give you no errors while rooting your phone using this process.
Hope this helps!