Is there any way or app to allow interval heart rate monitoring ? Continuous drains the battery & gives too much data. My MiBand can be set to measure the heart rate at settable intervals - eg every 15 mins. Would this be possible with the Pace ?
I prepared an interval workout in the mobile app. For each interval, I set a heart rate alert. Because this is how my training plan is.
I sync the interval workout to my watch.
The problem is that when doing the interval training, the watch displays the interval length, but it does not display the heart rate alert.
So instead of just looking at my watch and seeing what is my expected heart rate for the given interval, I have to memorize my expected heart rate zones. It would be very important that during the interval training I also see the planned hear rate zones (or pace, whichever I have given), so I can adjust my running accordingly.
How do you solve this problem?
Anybody here would like to check this app and check if this will enable High or Adaptive refresh rate in Note 20.
I am just curious as I got the refresh rate profiles coming from SM-N980F containing both 120hz and 96hz.
Standard Mode
WQHD+(3088x1440)@60.0/48.0 hz
FHD+ (2316x1080)@60.0/48.0 hz
HD+ (1544x720)@60.0/48.0 hz
Adaptive Mode
WQHD+(3088x1440)@60.0/48.0 hz
FHD+ (2316x1080)@120.0/96.0/60.0/48.0 hz
HD+ (1544x720)@120.0/96.0/60.0/48.0 hz
High Mode
WQHD+(3088x1440)@60.0 hz
FHD+ (2316x1080)@120.0/96.0/60.0 hz
HD+ (1544x720)@120.0/96.0/60.0 hz
[App]Galaxy Max Hz (Refresh Rate Mods, Screen-off Mods, QS Tiles, Tasker Support and More)
About this app: Refresh Rate Mods Change default refresh rates -Easily change the overall refresh rate settings of devices supporting multiple refresh rates. -Set supported mid refresh rates as the maximum refresh rate limit for battery...
forum.xda-developers.com
About this app:
Refresh Rate Control: Easily control the max refresh rate (Hz) of android devices with multiple refresh rates (e.g. note20 ultra, s20/S20+/S20Ultra, z fold 2, s21/s21+/s21Ultra, tab S7/S7+, z fold 3, z flip 3). This app can limit max refresh rate to 96hz (or any available refresh rate) on supported smartphones - you can save power with negligible difference on smoothness. Use either the in-app toggle or quick settings tile - ADB setup or Root NOT needed.
Switch to High: Option to use High(Fixed) motion smoothness mode on Samsung devices with native Adaptive motion smoothness***
Current Samsung smartphones natively supporting adaptive refresh rates:
Galaxy Note 20 Ultra
Galaxy Z Fold 2
Galaxy S21, S21+, S21 Ultra
Refresh Rate Monitor: Observe how multiple refresh rates work on your device. Use either the in-app toggle or quick settings tile
Quick Resolution Switcher: Easily switch to any supported resolutions using the included quick setting tile***
Quick High/Adaptive on Power Saving Mode: Easily switch to high or adaptive motion smoothness mode (from Standard) even on power saving mode on supported Samsung smartphones.***
Force to Lowest Hz: Force lowest refresh rate on screen-off/AOD. This overrides Samsung's strange stock behavior which sets the refresh rate to the highest on screen off (update: it is now at 60hz since oneui3.0) - to improve standby power consumption a bit - ADB setup or Root NOT needed.
Auto apply power saving mode during screen-off (after ~ 10 secs)***
Tasker plugin support: Automate GMH settings using the app's Tasker plugin support. Supported actions/variables: Max Refresh Rate, Keep Motion Smoothness on PSM, Motion Smoothness Mode, Quick-doze Mod, Change Screen Resolution. (new in v7.10). More info in FAQs below.
Premium Features:
Keep High/Adaptive motion smoothness when power saving mode is enabled whether manually or by the system/adaptive power saving***
Adaptive refresh rate mod for devices supporting multiple refresh rates but do not have the native Adaptive motion smoothness (e.g. S20 series, S20FE, TabS7/S7+) with the ability to set the brightness threshold for its activation***
Quick-doze mod: Quickly enter doze mode during screen-off that can not be interrupted by motion ***
Set minimum refresh rate for adaptive mode to 60hz or lower (if available)***
Resolution switcher filter: Filter what screen resolutions to include for the resolution switcher QS tile.
Auto SENSORS OFF (experimental non-root workaround):
Device sensors will automatically turn off while screen is off until the device is unlocked. This helps minimize battery-draining motion-triggered wakelocks.
Statusbar net speed indicator
7-day Premium Trial is available. Just click "Activate Premium|Trial" button and activate free trial when prompted.
Note: Ad-free license is on a per device basis.
***these marked features require a one-time ADB setup (this is not root)
Download link , FAQs and more info in original xda thread
v7.10.21 in-app update now available
- Bug fixesv7.10 changes- Separate Max hz setting for power saving mode- Automate GMH settings using Tasker plugin support. Supported actions/variables: Max Refresh Rate, Keep Motion Smoothness on PSM, Motion Smoothness Mode, Quick-doze Mod, Change Screen Resolution. Check FAQs for the basic setup guide.- Some code refactoring and optimizationsNote: Clear app's data if experiencing any issues
v7.14.00 in-app update now available.
tribalfs said:
v7.14
Added Auto SENSORS OFF (experimental non-root workaround): Device sensors will automatically turn off while screen is off until the device is unlocked. With tasker support so you can enable and disable this setting on the conditions you set.
Click to expand...
Click to collapse
tribalfs said:
v7.13
Anti-flicker: added minimum brightness threshold for Adaptive mod similar to the native one. When the device's display brightness falls below the set minimum brightness threshold, adaptive mod will pause and will resume once the brightness increases again above the threshold. This is for devices who are experiencing flickers when refresh rate switches at certain low brightness level.Stability and bug fixes
Click to expand...
Click to collapse
v7.14.10 in-app update now available
-48hz on force lowest on screen off/AOD now works on S20/+/Ultra on any refresh rate mode-improvements on brightness threshold for adaptive mod performance(anti-flicker)-added quick settings tille to toggle min hz for adaptive mod on supported devices-added tasker option to toggle min hz for adaptive mod on supported devices-other fixes
v7.14
Added Auto SENSORS OFF (experimental non-root workaround): Device sensors will automatically turn off while screen is off until the device is unlocked. With tasker support so you can enable and disable this setting on the conditions you set.
It will flash when the adaptive mode changes the refresh rate. Can it be solved
v7.14.20 in-app update:
-Google Chrome's swipe to switch tab gesture is now working even with the accessibility service enabled.-Improved Turkish translations-some minor improvements
v7.14.19
Fixed: Retain previously selected mode(high or adaptive) when switching back from standard mode
Refresh rate overlay now visible on settings/notification panel and lockscreen - stock-like but customizable
Improved Swedish translations
v7.14.18
Fixed bugs on OneUi4.0: brightness threshold for adaptive mod bug, netspeed indicator bug
Fixed bug on minimum hz tile and minimum hz tile tasker command
Minor layout and tile improvements
Auto dim refresh rate overlay when not changing after few seconds
Fixed crashes on netspeed indicator
v7.14.17
Workaround for auto sensors off for OneUI4.0. Prior method was already blocked in A12.
Experimental workaround: enabling High/Adaptive on PSM on OneUI4.0 (not working on some models)
Fixed: setting min hertz for adaptive (%lhz) using Tasker not working
v7.14.51 in-app update
-improved Spanish translations-added google maps trick to enable High/Adaptive refresh rate while on PSM for S20 series, S20FE, A52 and A72 devices with OneUI4.*.-fixed bug related to "Prevent Switching to High" settings on devices with non-native adaptive refresh rate-minor general improvements on adaptive mod
Hello, I bought premium today and unfortunately, high refresh rate is not working while on power saving mode. Can you help please? Thanks
SM-A725F AOS 12 OneUI 4.0
I already granted permissions via ADB as well.
Which rates is recommended 60 or high?
Is high rates 120Hz danger for super amoled display? does it causes a burns?
Looks like this is still an issue even for the S23 Ultra:
Picture in Picture, Split Screen etc - Refresh Rate drops to 60Hz (EXYNOS)
Hi there, I'd not noticed this before the Android 12 update, but refresh rate appears to drop from 120Hz to 60Hz when using Picture in Picture or Split Screen views. Can anyone else reproduce this please? You can confirm this by going into...
forum.xda-developers.com
"...refresh rate appears to drop from 120Hz to 60Hz when using Picture in Picture or Split Screen views"
Therefore seems like Samsung have made this a permanent change, and I can't understand why.
Try samsung galaxy maxhz, set constant high, meaning is always 120hz
[App]Galaxy Max Hz (Refresh Rate Mods, Screen-off Mods, QS Tiles, Tasker Support and More)
About this app: Refresh Rate Mods Change default refresh rates - Easily change the overall refresh rate settings of devices supporting multiple refresh rates. - Set supported mid refresh rates as the maximum refresh rate limit for battery...
forum.xda-developers.com