Hi,
I installed the 9.14 firmware as instructed on a previous thread.
The uploading of the res and fw file completed in the amazfit bip. However the amazfit reboot and its not opening since.
12hrs already passed and still its not turning on.
What I noticed is that the bluetooth signal can be detected by other phones. Then I can connect via Ble Scanner but it will disconnect.
Is there a way to force flash the firmware?
Thank you.
Same problem here.
Same. Anyway solution so far?
vernel1008 said:
Hi,
I installed the 9.14 firmware as instructed on a previous thread.
The uploading of the res and fw file completed in the amazfit bip. However the amazfit reboot and its not opening since.
12hrs already passed and still its not turning on.
What I noticed is that the bluetooth signal can be detected by other phones. Then I can connect via Ble Scanner but it will disconnect.
Is there a way to force flash the firmware?
Thank you.
Click to expand...
Click to collapse
Only one idea: Delete Gadgetbride, restart your Phone, install Mi Fit-App, Switch your Phone language to english (If isn't) and try to install Firmware again.
HTH
I had the same problem, i was desperate and ready to throw it away, but i finally did what urs1956 said and it worked!! (Only thing is that i paired it with an other device at first).
i am the same probleme but juste uptdate firmware with mi fit... and black screen... bricked...
Nothing work.
Hello,
I have the same issue (black screen) after installed a firmware french, the watch started to upload the new chinise version 1.0.80 when I appaired again the watch with mifit and instead restart : black screen.....
I see the watch in bluetooth but I can't appair it again !!!
Some ideas?
jrebillard said:
Hello,
I have the same issue (black screen) after installed a firmware french, the watch started to upload the new chinise version 1.0.80 when I appaired again the watch with mifit and instead restart : black screen.....
I see the watch in bluetooth but I can't appair it again !!!
Some ideas?
Click to expand...
Click to collapse
Me. too
sleep in black screen.
My conversation with Amazfit/Huasmi
Molly (Amazfit)
Feb 10, 00:47 PST
Hello,
Thank you for contacting Amazfit.
We are very sorry that you have trouble with your device.
Have you ever flashed the ROM of your watch?
Can you please send us a screenshot of your watch screen?
If the screen turned off, please charge it to have a try.
If it doesn't work, please remove the device from the charger, put it on the table, make it untouched for 24-48 hours to let the battery drains and then charge it to see if it solves the issue.
If your issue persists, please get touch with the seller to return the device to have it examined.
Thank you for your understanding!
Sincerely,
Molly | Amazfit Support
Feb 9, 16:19 PST
Amazfit BIP bricked after firmware update: Hi,
I did a firmware update which apparently failed as since then the watch will show a black screen only.
The watch is discoverable in the android bluetooth settings, however, I cannot pair or connect to it.
Is there any way of "forcing" an update via bluetooth?
Kind regards
That same answer from support.
wait for battery drains and then charge it << Not resolve this problem.
I'm wait sinc Last month until now. It's sleeping.
https://amazfitwatchfaces.com/cor/
any news?
Hello,
i have a bricked Amazfit BIP so i decided to open it up.
I saw there is a Winbond 25Q64FWIQ flash onboard, so i'm wondering if anyone has a flash dump to try to reflash mine with a chip programmer
Hello. I have changed the password of my home's wifi network and since then I can't connect my amazfit pace with it. First it showed wrong password and after that it stucks showing '' connecting''. Maybe the solution is to delete this network from amazfit and then to try new connection, but I can't find how to delete it. Any help?
Factory reset = unpair -> pair again.
lfom said:
Factory reset = unpair -> pair again.
Click to expand...
Click to collapse
But if I do factory reset I will have to reinstall gearfit and amazmod. I wonder If there is another way.
SACS73 said:
But if I do factory reset I will have to reinstall gearfit and amazmod. I wonder If there is another way.
Click to expand...
Click to collapse
Unless you have root (what you don't if watch is on stock firmware), there is no other way.
Hi,
i used the App Notify and Fitness - and update the language Paket on my Watch. After connect to the Mifit App, the language Pack was updatet again. After that, the Display from the watch shows a blank Screen with flashes up sometimes.
An update with other firmware - and back to the original Firmware with Ressources and Language Pack doesn't work.
Here is an video, that shows the flashes on Display.
Who can help me???
I can't post a link.
youtube + com / watch?v=BVqoI0WP9Ow
(+=.)
It seems like the watch is constantly rebooting or sth similar (I don't own a bip). Unless it boots into a stable state where you can connect on it through bluetooth to push an update, I don't think you can fix it (at least not without performing a surgery).
Is It connecting to phone over bluetooth?
Hi everybody. I need some help..
I was update my Verge Lite on Notify and Fitness app. I dont know how it happened but it couldnt finish update. I tried 3 times for update again but it couldnt. Then i deleted mi fit, Amazfit app and Notify&fitness app for try again but after install all apps i have a big problem..
Mifit or Amazfit offical app recognize my watch but it failed to try pair. There is some note in Turkish like factory reset. But i cant pair with offical apps. And on the watch screen i can see only "Please open the app and select check for updates on the watch pageto continue update". Also notify&fitness can pair but there is 2 ways i have to do for work Notify&fitness. First way pair with offical app (i cant do this) and the other option is auth key for "no mifit app" option. I searched for that but i think there is one way for find the auth key is ''freemyband''. Freemyband wants pair with an offical app. I cant pair with offical app how can i do that?
I'm lost Please help me. I dont want buy a new watch.. Thank you all and sorry for my bad english
Edit: I fixed my verge lite with helps of @Fardeenansari21. We worked on so much but it was very easy. If your Verge Lite bricked like mine just put into charge dock while pressing button and it will open again.
Hi @10ore, good morning from Spain.
I've got a Verge Lite chinese version and i'm looking for a firmare or trick to get it in English or Spanish. Is it possible? Do yo know how?
In fact I could load a global version and the watch connected with the Amazfit app but a "Please open the app and select check for updates on the watch page to continue update" message appeared. With your proposed solution, I could put into charge and press the button to move between options (in English!!!!) but i haven't found a solution to avoid this semi-bricked message yet. Can you help me? Do you know any solution?
Also, if I connect the watch with the official Amazfit app, it updates de firmware to the lastest official version and the message "Please open the app and select ..... continues forever....
Thank you very much in advance.
txelu.
Hello guys,
I've just purchased an amazfit GTS and connected it to the Zepp App. A firmware update begins and the stop a few seconds later with a screen "Update impossible". I've tried to reboot the watch, dissociate it but it's still not working. The watch is otherwise in English while I need it in french..
Thank you for help
Even though I have my GTS for some time now I just got a similar issue I think. Update failed mid the process and couldn't connect anymore. What helped me was 1) unpair the watch in Zepp app 2) unpair BT device in Android settings (assuming it's there) 3) factory reset the watch (either by the entry in Settings or long press the button if it shows a QR code). Basically a complete reset. After I did that the firmware update continued and finished successfuly.