Hello,
I have a problem, after flashing new firmware in TWRP, and flashing new rom there is error message:
Error opening /data/bootchart (permission denied)
I try to using mi flash but no work, the phone is bootloop stuck at redmi logo and the automatic redirect to TWRP.
every time i want to Wipe Data/System it show that error to.
Any solution?
Thank You
Format data
yaro666 said:
Format data
Click to expand...
Click to collapse
thank you, its working now
Related
HI guys, I did this guide https://forum.xda-developers.com/moto-z/how-to/how-to-relock-bootloader-moto-z-xt-1650-t3821817 to relock bootloader and flash stock rom and it worked. I have now 8.0 oreo on my phone, but it doesnt OTA update, there is a security patch from 1st july, it downloads, then reboots to install mode, but while installing like 1/3rd of the bar, the android robot appears laying on the ground with red mark saying "Error". Any help is appreciated pls. thanks!
Pathera said:
HI guys, I did this guide https://forum.xda-developers.com/moto-z/how-to/how-to-relock-bootloader-moto-z-xt-1650-t3821817 to relock bootloader and flash stock rom and it worked. I have now 8.0 oreo on my phone, but it doesnt OTA update, there is a security patch from 1st july, it downloads, then reboots to install mode, but while installing like 1/3rd of the bar, the android robot appears laying on the ground with red mark saying "Error". Any help is appreciated pls. thanks!
Click to expand...
Click to collapse
try to sideload the ota through adb, you'll find out what's causing the error
Pulsa said:
try to sideload the ota through adb, you'll find out what's causing the error
Click to expand...
Click to collapse
error in recovery it shows me this:
Verifying current system... E3005: "/bt_firmware/image/btfw32.tlv" has unexpected contents. E:Error in /cache/Blur_Version.27.211.6.griffin.retail.en.US.zip (Status 7) Installation aborted.
You received error because you used the wrong OTA file (Blur_Version.27.211.6.griffin.retail.en.US.zip it's already installed on your phone if you re-locked it).
On the other topic I gave you the tutorial to sideload and the correct file to use, Blur_Version.27.231.8.griffin.retail.en.US.zip.
Pathera said:
error in recovery it shows me this:
Verifying current system... E3005: "/bt_firmware/image/btfw32.tlv" has unexpected contents. E:Error in /cache/Blur_Version.27.211.6.griffin.retail.en.US.zip (Status 7) Installation aborted.
Click to expand...
Click to collapse
just reflash the btfm file using fastboot
Pulsa said:
just reflash the btfm file using fastboot
Click to expand...
Click to collapse
Did that still same error and sideloading also wont work it gives me the same error
Hi all,
I'm using s9+ korean, G965N. I installed twrp recovery and rooted, but in my recovery, when i do anything, i received error: Failed to mount preload invalid argument. How can i fix this error. Thank you!
DarkSky204 said:
Hi all,
I'm using s9+ korean, G965N. I installed twrp recovery and rooted, but in my recovery, when i do anything, i received error: Failed to mount preload invalid argument. How can i fix this error. Thank you!
Click to expand...
Click to collapse
Did you resolve the problem? I have same problem
All you need to do is go to official download page, download your official latest rom and flash
Download the most recent firmware and flash in Odin. (There is instructions on how to download the correct firmware in the post)
[GUIDE] UNBRICK POCO X2/ REDMI K30 after flash with TWRP /0MB memory
Things You Need To Get Started
1. A Computer With Adb Tools Installed
2. Some Patience
3. Works only on phones with unlocked bootloader
Let's start.
1. install ADB/Fastboot
https://developer.android.com/studio/releases/platform-tools
2. download FASTBOOT ROM
http://file.sakshieducations.com/poco-x2-flash-file/
3. unzip 2 times unzip the rom twice with 7zip
4. move the folder with the rom inside to partition ,,D " .Don't leave it on DESKTOP on , several computers / laptops have encountered problems with MIFLASH.
5. go to unziped rom and EDIT
6. open MIFLASH and go to the rom and select
7. select clean all as in picture and flash all bat
8. turn phone in to FASTBOOT AND CONNECT TO THE LAPTOP/DESKTOP
9. refresh in MIFLASH
10. wait until is finish, don't be scared if it gives you an error at the end, the error is that it can't lock the bootloader. The phone is ready in perfect working order
MOD EDIT: Telegram/Whatsapp link removed, please read the STICKY!
link https://www.youtube.com/watch?v=18GRfPxSdAs&ab_channel=DragosMihai
You should fix the ADB link, the ADB provided in that link is outdated. Even the author of that post suggested not using it. Go here: https://developer.android.com/studio/releases/platform-tools
stuck on TWRP
Hello can anyone help me here, i am stuck on TWRP device POCO X2 INDIAN VERSION, I was on custom ROM i was flashing another rom through recovery while i try to flash any ROM IS GIVES ERROR (failed to mount '/system_root' no such file or directory failed to mount '/odm , WIPE DALVIK CACHE GIVES ERROR (failed to mount '/system_root' Invalid argument)
i tried flashing through fastboot gives anti roll back error
any help
thank you
Can you attach video with your problem and a video when you try to flash fastboot
Or I can help you with team viewer and let me try to flash your phone
KartikManish said:
Hello can anyone help me here, i am stuck on TWRP device POCO X2 INDIAN VERSION, I was on custom ROM i was flashing another rom through recovery while i try to flash any ROM IS GIVES ERROR (failed to mount '/system_root' no such file or directory failed to mount '/odm , WIPE DALVIK CACHE GIVES ERROR (failed to mount '/system_root' Invalid argument)
i tried flashing through fastboot gives anti roll back error
any help
thank you
Click to expand...
Click to collapse
Move miflash tool to c drive and also put fastboot rom file in miflash folder
Thank you guys
Thank you so much guys i did managed to roll back to stock official miui firmware i had the wrong fastboot recovery downloaded did not know which one was correct tried different versions and one worked now i am official updated to Miui 12.
I am new to all this does anyone know if fastboot images for miui 12 for Poco x2 are out...?
I would like to try rooting and flashing custom roms again in few days.
hello guys, who can help me install miui 12 I rom, I installed the last twrp, I deleted the data partition, cache and dalvik and after the restart only the logo is lit, i changed from poco x2 rom to k30 rom and i have the same problem BOOT LOOP
KartikManish said:
Hello can anyone help me here, i am stuck on TWRP device POCO X2 INDIAN VERSION, I was on custom ROM i was flashing another rom through recovery while i try to flash any ROM IS GIVES ERROR (failed to mount '/system_root' no such file or directory failed to mount '/odm , WIPE DALVIK CACHE GIVES ERROR (failed to mount '/system_root' Invalid argument)
i tried flashing through fastboot gives anti roll back error
any help
thank you
Click to expand...
Click to collapse
Download the stable version on mi comunity by vpn download and flash change the name from phoneixin to phoneix
Hello, i was on RR rom for joyeuse, but i tried to flash the new stock rom version (11.0.7) i did a Data format with twrp, reboot to twrp, wipe factory and flash the zip of stock rom(11.0.7), reboot to system and my device shows me system destoyed XD.
So i go to my pc, open Miflash 20-3-14, tried to flash V11.0.5 but it shows me an error "error reading sparse file", i tried again but now it shows an error sending userdata too many links.
After that i tried to flash xiaomi eu rom(11.0.4 fastboot) so I open the "installer" for windows, but ends with an error too at step 3/7 (FAILED (Error reading sparse file) ).
I finally recover my phone flashing the twrp and flashing the xiaomi eu rom (11.0.5), but I have no idea what I did wrong trying to go back with MiFlash.
Any suggestion of the correct steps to go back to stock? thanks!
pd: I reboot the pc so many times and the device too but always end with an error :'c
(sorry for bad english :fingers-crossed: )
SOLVED: it was a problem on my pc, I think a problem on the drivers
https://gist.github.com/j-jith/0c4950e8020d9bed0c3104608b07a49d
There is even a script to relock the bootloader.
heyadmwutanime said:
https://gist.github.com/j-jith/0c4950e8020d9bed0c3104608b07a49d
There is even a script to relock the bootloader.
Click to expand...
Click to collapse
Thank you sir, I will try that method
https://forum.xda-developers.com/redmi-note-9-pro/how-to/tutorial-how-to-revert-to-official-t4109831
razerphynx said:
https://forum.xda-developers.com/redmi-note-9-pro/how-to/tutorial-how-to-revert-to-official-t4109831
Click to expand...
Click to collapse
I've already try that but end with error reading sparse file and I don't know why
pwnaz said:
I've already try that but end with error reading sparse file and I don't know why
Click to expand...
Click to collapse
Did you create a log folder in the program's directory?
razerphynx said:
Did you create a log folder in the program's directory?
Click to expand...
Click to collapse
Nope, I did not, but I'll see if there are something in the mi flash directory or in the xiaomi EU fastboot rom
razerphynx said:
Did you create a log folder in the program's directory?
Click to expand...
Click to collapse
I found the log file of some errors what i had trying to flash with MiFlash
https://drive.google.com/file/d/1obGcEy7_8qm1ouGfY5oQl9qgreFuWo0O/view?usp=sharing
This was the first
And after that one i tried again and I get user data error
https://drive.google.com/file/d/1MLIsIIuBkaftYwoGFztA1NrA__y-MSUi/view?usp=sharing
Any idea? thanks!
Hello everyone!
I am in the process of rooting this device. I need to do this since I need to test / develop AR Apps. So either I buy a new phone or I root this one and try if it works (and by trying that avoiding buying one). After some driver issues - I solved them by using Linux instead of Windows - I ended up with TWRP. In TWRP - Install I was not able to install anything since I got some permission errors. Now I seem to be unable to even install TWRP by using
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
but the device is still recognized while in fastboot.
When I enter recovery I get a long list of errors. Like:
E: [libfs_mgr] Failed to open '/dev/block/platform/bootdevice/by-name/cache': No such file or directory.
Click to expand...
Click to collapse
or
E: [libfs_mgr] Failed to format /cache:No such file or directory
Click to expand...
Click to collapse
Is there anything left I could try to get a working TWRP with permissions?
Thanks for any hints!
Andreas