Back to stock Q Kernel - Samsung Galaxy A20 ROMs, Kernels, Recoveries, & Ot

If you are on OneUI and want to go back to stock Q kernel (not stock rom) for testing, flash this.

Thank you

thatha said:
Thank you
Click to expand...
Click to collapse
You're welcome

This casued my 205f to get a little cyan ribbon on boot and wont boot anymore
cant even use odin to reflash the stock rom it says the device is old but it used to work fine...
how do i fix it please

Bonnnn said:
This casued my 205f to get a little cyan ribbon on boot and wont boot anymore
cant even use odin to reflash the stock rom it says the device is old but it used to work fine...
how do i fix it please
Click to expand...
Click to collapse
That's odd.
Nobody else has had this problem.
You should always be able to flash stock rom from odin.
make sure you are on Q (Android 10)
Crash Recovery for the Samsung Galaxy A20
Crash Recovery for the Samsung Galaxy A20 1. Be Prepared Most of us will suffer from a crash at some time. If you know how to fix it, you will have a lot less stress. There are certain files you need to keep in readiness. Always backup boot...
forum.xda-developers.com

Related

Stuck at samsung screen after flusing kernel

stuck at samsung screen after flashing latest kernel from pershoot, and also i cant access my storage
im kinda new to this so please help me .
________________________________________________________________________________________________________________________________
btw, i think i found the problem, the latest kernel is for ICS but my tab is still using stock rom which is JB,
so how i can repair this problem?
Yes...me also stuck.
Than I get back to Recovery and reflash again Galaxy Task v14 - comes back to a live.
But now after I shut down screen or go to sleep my screen gets error (can't see anything - just lines)
Try to reflash or restarts - doesnt help.
Any idea?
LVNona said:
Yes...me also stuck.
Than I get back to Recovery and reflash again Galaxy Task v14 - comes back to a live.
But now after I shut down screen or go to sleep my screen gets error (can't see anything - just lines)
Try to reflash or restarts - doesnt help.
Any idea?
Click to expand...
Click to collapse
i cant even access my storage how am i gonna copy any rom to flash
catalan90_V said:
i cant even access my storage how am i gonna copy any rom to flash
Click to expand...
Click to collapse
If you don't have a custom rom in your sdcard, then maybe you can push it with adb? Or you can always flash back to stock with odin.
Sent from my amazing 10.1 galaxy tab
catalan90_V said:
stuck at samsung screen after flashing latest kernel from pershoot, and also i cant access my storage
im kinda new to this so please help me .
________________________________________________________________________________________________________________________________
btw, i think i found the problem, the latest kernel is for ICS but my tab is still using stock rom which is JB,
so how i can repair this problem?
Click to expand...
Click to collapse
Use the AOKP rom which is ICS and has the kernel in it already. I installed it on my galaxy tab 10.1 p7510 and it works fine. Since I'm a "new" user I can't post the link but just google AOKP and you'll see their site, look for Milestone 6, thats the rom you want.
LVNona said:
Yes...me also stuck.
Than I get back to Recovery and reflash again Galaxy Task v14 - comes back to a live.
But now after I shut down screen or go to sleep my screen gets error (can't see anything - just lines)
Try to reflash or restarts - doesnt help.
Any idea?
Click to expand...
Click to collapse
This is caused by the kernel I believe. Try clearing all the caches in clockwork recovery mod and see if that fixes it (delvik and so on). By the way, clearing those caches will make it take longer than usual to start up so you should leave it alone for at least 15-20 min to be safe. If after that much time has pass and it still hasn't booted up completely, I'd consider flashing a different rom on it. The AOKP rom has the overclock kernel in it and is stable without those lines that appear after you turn the screen off and back on after a fresh OS install. Use Odin to flash the new rom if you cannot access the SD card.
tq guys, the problem already resolve
i pushed rom file using adb and install it with cwm

Can't Flash any Rom

Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
my phone got bricked the first time when i was trying to update the rom from SlimBean 4.2.2 Build 7 to Build 8 (had done the process many times and never had a problem) did the usual, put the Rom and the Gapps .rar files in the sd card and performed wipe data/ factory reset only this time i went into mounts and storage and wiped everything that was under there as well (dont know why) so when went to flash the rom it was no longer on the sd card (cause i wiped it) so rebooted my phone and it got stuck on the vibrant screen with i fixed already and my problem now is the one mentioned above
i have browsed the different forums and have tried many different methods to try to fix it for example: have brought it back to stock with Odin also with AIO Vibrant Toolbox and even tried UVKB5_Stock_Heimdall-One-Click wich is a froyo 2.2 that comes with CWM recovery with voodoo lag fix and root. even though all these methods work as far as bringing the phone back to stock i still get the same problem when trying to flash a rom, i also have installed CWM through Rom manager and also through the update.zip file i think im doing everything right and have tried multiple forums yet havent been able to find a forum about this specific issue so decided to create this thread as a last resource
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
This worked for me
elpromo01 said:
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
Click to expand...
Click to collapse
Mine would remove the root when I rebooted it not allowing me to install a rom also. I used the Super One Click and the root stuck. I suggest you give it a try.
Super One Click
seerenr since
Devil-Dog said:
Mine would remove the root when I rebooted it not allowing me to install a rom also. I used the Super One Click and the root stuck. I suggest you give it a try.
Super One Click
Click to expand...
Click to collapse
my problem is not really with rooting the phone, it is rooted i just cant flash roms. whenever i try to flash a rom it reboots and gets stuck on the vibrant screen (bricked) so i have to take it back to stock
thanks though
elpromo01 said:
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
my phone got bricked the first time when i was trying to update the rom from SlimBean 4.2.2 Build 7 to Build 8 (had done the process many times and never had a problem) did the usual, put the Rom and the Gapps .rar files in the sd card and performed wipe data/ factory reset only this time i went into mounts and storage and wiped everything that was under there as well (dont know why) so when went to flash the rom it was no longer on the sd card (cause i wiped it) so rebooted my phone and it got stuck on the vibrant screen with i fixed already and my problem now is the one mentioned above
i have browsed the different forums and have tried many different methods to try to fix it for example: have brought it back to stock with Odin also with AIO Vibrant Toolbox and even tried UVKB5_Stock_Heimdall-One-Click wich is a froyo 2.2 that comes with CWM recovery with voodoo lag fix and root. even though all these methods work as far as bringing the phone back to stock i still get the same problem when trying to flash a rom, i also have installed CWM through Rom manager and also through the update.zip file i think im doing everything right and have tried multiple forums yet havent been able to find a forum about this specific issue so decided to create this thread as a last resource
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
Click to expand...
Click to collapse
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
firefly6240 said:
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
Click to expand...
Click to collapse
i have re-flashed recovery multiple times i wish there was another type of recovery i could install
on another note im trying to install android 4.2.2 SlimBean and 4.3.3 and i dont know what bootloader i have nor how to check it, id appreciate it if u could show me how to check wich one i have and how to up it
thanks
firefly6240 said:
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
Click to expand...
Click to collapse
the combo i have to do for recovery is volume up and down and the power button simultaniosly
elpromo01 said:
the combo i have to do for recovery is volume up and down and the power button simultaniosly
Click to expand...
Click to collapse
Try flashing a 2.2 rom or below.
if that works you probably just need to flash GB bootloaders before flashing the 4.2 rom (See Below)
if that doesn't work I wouldn't worry about the step below until we figure out why its not working.
To flash GB bootloaders go here: http://forum.xda-developers.com/showthread.php?t=1117990
firefly6240 said:
Try flashing a 2.2 rom or below.
if that works you probably just need to flash GB bootloaders before flashing the 4.2 rom (See Below)
if that doesn't work I wouldn't worry about the step below until we figure out why its not working.
To flash GB bootloaders go here: http://forum.xda-developers.com/showthread.php?t=1117990
Click to expand...
Click to collapse
ok so i installed GB bootloader following the instructiones as shown in the forum, went ahead an tried to flash Slimbean 4.2.2 build 8 and the same thing happened my phone is stock at the boot screen only different is that instead of the vibrant screen im getting a semaphore screen (i guess is because of the gb bootloader) anyway flashed back to stock using Odin and im back where i started so it doesnt seem to be a bootloader related issue
thanks anyway
elpromo01 said:
ok so i installed GB bootloader following the instructiones as shown in the forum, went ahead an tried to flash Slimbean 4.2.2 build 8 and the same thing happened my phone is stock at the boot screen only different is that instead of the vibrant screen im getting a semaphore screen (i guess is because of the gb bootloader) anyway flashed back to stock using Odin and im back where i started so it doesnt seem to be a bootloader related issue
thanks anyway
Click to expand...
Click to collapse
Flash the rom again instead of going back to stock when it hangs. You have to flash JB roms twice most of the time when you are on stock 2.1, the first flash simply upgrades your recovery mode. Pull the battery after the first flash and boot back into recovery (should be blue now) and flash the rom again.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
Flash the rom again instead of going back to stock when it hangs. You have to flash JB roms twice most of the time when you are on stock 2.1, the first flash simply upgrades your recovery mode. Pull the battery after the first flash and boot back into recovery (should be blue now) and flash the rom again.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
i just fixed, i tried to flash CM10.1 and it crashed during the process only this time instead of getting stuck on the Vibrant screen it rebooted back into the recovery mode wich is now blue and version 6.0.2.1 intead of 2.5.1.2.
im running CM10.1 right now and so far everything looks good :laugh: only thing different now is that it say Galaxy S GT-I9000 and is the t959, doesnt really bother me as long as the phone behaves im just sayin
thanks to everyone that took their time to help, never give up on a Vibrant cause it will never give up on you :good:
elpromo01 said:
i just fixed, i tried to flash CM10.1 and it crashed during the process only this time instead of getting stuck on the Vibrant screen it rebooted back into the recovery mode wich is now blue and version 6.0.2.1 intead of 2.5.1.2.
im running CM10.1 right now and so far everything looks good :laugh: only thing different now is that it say Galaxy S GT-I9000 and is the t959, doesnt really bother me as long as the phone behaves im just sayin
thanks to everyone that took their time to help, never give up on a Vibrant cause it will never give up on you :good:
Click to expand...
Click to collapse
Glad you figured it out. Just so you you know, your phone says GT-I9000 because you flashed gingerbread bootloaders. They provide better button combinations to recovery and download modes, much easier than stock combos.
Sent from my SGH-T959 using Tapatalk 2
Good to know, thanks!!
Sent from my SGH-T959 using xda app-developers app

[Q] samsung s2 wont stop rebooting

hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
the donkey said:
hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
Click to expand...
Click to collapse
Do you mean you can't even get into recovery? If it can, I would think a data wipe might get the ROM to be able to boot.
the donkey said:
hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
Click to expand...
Click to collapse
You might want to double check if you are using the right version of recovery that kernel is fully supported with your ROM. For example, if you are trying to install a KK ROM using an old version of CWM you will end up in error 7 or end up in a boot loop screen. My words are pretty mess up but I hope you get what I mean. So make sure you have the right version that match each other (recovery, kernel, ROM).
Hope that helps.
im new to all of this. when i hold the home button the power button and the vol down button i get a screen telling me installing a custom os could be bad press up to continue i do this and install even the official software but when it reboots it keeps looping on the samsung logo
cglegion said:
You might want to double check if you are using the right version of recovery that kernel is fully supported with your ROM. For example, if you are trying to install a KK ROM using an old version of CWM you will end up in error 7 or end up in a boot loop screen. My words are pretty mess up but I hope you get what I mean. So make sure you have the right version that match each other (recovery, kernel, ROM).
Hope that helps.
Click to expand...
Click to collapse
i cant access the phone to see what kernal was on it so i am just trying to get it back to normal
the donkey said:
i cant access the phone to see what kernal was on it so i am just trying to get it back to normal
Click to expand...
Click to collapse
I suggest you flash a working recovery via odin first. Look for TWRP, it's the best newbie-friendly recovery or try CWM if you are looking for more advanced options. After that, flash a stock or custom ROM to get your phone back working. Make sure they are compatible with each other. Why didn't it work when you try flashing the stock firmware via odin? Make sure the zip file is downloaded properly.
Hope that helps.
cglegion said:
I suggest you flash a working recovery via odin first. Look for TWRP, it's the best newbie-friendly recovery or try CWM if you are looking for more advanced options. After that, flash a stock or custom ROM to get your phone back working. Make sure they are compatible with each other. Why didn't it work when you try flashing the stock firmware via odin? Make sure the zip file is downloaded properly.
Hope that helps.
Click to expand...
Click to collapse
that sounds excellent but being new and a bit thick what is a twrp and where would i get one?
still no joy
ok so now i have tried 3 official samsung roms h3g o2 and t mobile the h3g installs but just keeps looping the boot screen the o2 failed and the t mobile installes but all i get is a blck screen but it showes the batter the clock and the usb conection i can also go into it through my computer but it wont boot up properly. is it possible to get a samsung rom thats not network based?
the donkey said:
ok so now i have tried 3 official samsung roms h3g o2 and t mobile the h3g installs but just keeps looping the boot screen the o2 failed and the t mobile installes but all i get is a blck screen but it showes the batter the clock and the usb conection i can also go into it through my computer but it wont boot up properly. is it possible to get a samsung rom thats not network based?
Click to expand...
Click to collapse
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
il give it a go
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
il try that just now cheers
ahhh my heed
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
ok so i downloaded the romnuke and the neatrom the instructions say... Boot into Recovery
- Install RomNuke (Does all clean & backup your android folder as well) - Thanks to Hawkerpaul
- Install ROM
- Reboot & Enjoy
but when i unzip the files i cant see any way of gettong romnuke to work i tried odin but it doesnt pick it up is there some other download i need??
still no joy
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
ok so i put the zip files on an sd card and put it in the phone. but when i try and install them it says ignature verification failed also if i try and wipe the date and retore it says faild to mount/efs invalid argument. when i manage to get the t mobile rom to load the screen is black but i can get the swipe down screen to turn on blue tooth or wifi
the donkey said:
ok so i put the zip files on an sd card and put it in the phone. but when i try and install them it says ignature verification failed also if i try and wipe the date and retore it says faild to mount/efs invalid argument. when i manage to get the t mobile rom to load the screen is black but i can get the swipe down screen to turn on blue tooth or wifi
Click to expand...
Click to collapse
This error is most probably because you don't have the right Rom for the right model or not compatible hence the verification error. Are you doing this in recovery mode? Make sure you follow the installation instructions properly and download the right one for your phone model. Just try cyanogenmod for starter. Installation is easy to understand.
still no joy
cglegion said:
This error is most probably because you don't have the right Rom for the right model or not compatible hence the verification error. Are you doing this in recovery mode? Make sure you follow the installation instructions properly and download the right one for your phone model. Just try cyanogenmod for starter. Installation is easy to understand.
Click to expand...
Click to collapse
ok so i went to cyanogenmod downloaded the newest file for the s2 when i did unzip i get 2 folder meta-inf and system plus a boot.img file. i burned the boot file to a disc but when i check it the disk is empty even though i can see its burned. also when i go to sammobile to get firmare it says no files available...therte must be some way of getting this to work H E L PPPPPPPPPPP
Dude, you're not supposed to be burning anything to discs. The zip file is what the recovery uses to install from. It should include the custom kernal too.
Copy the zipped ROM file to your SD card, put it in your phone and boot into recovery. Assuming you've already flashed the latest custom recovery CWM or TWRP (I prefer TWRP)
From here, to be safe, do a full wipe (That's everything except sd-card: system, data, cache, dalvik-cache)
Now you install/flash the zip file via recovery. Hopefully that completes without error. After that clear cache and dalvik-cache again just to be sure (I do this out of habit)
Reboot.
Hope this helps. I saw you mention something about "efs" and that gives me a bad feeling, read something about needing to back that up before bad things happen. But anyway, good luck :good:

Mega sph-l600 booting

I was replacing a screen for my friend and the phone (sprint sph-L600) was working just fine. Then it stated there was an update, I selected ok. Since then the phone has been looping Samsung Mega and vibrating 2 times over and over. I downloaded odin and flashed 4.4.2 and still the same issue. I can not get into samsung recovery as it does the same reboot over and over. I flash it with a different recovery, and then could get into the recovery mode,once I flash the stock rom, I'm back to square one, rebooting and no recovery. Before I did a flash recovery I did notice the KNOX was 0x1, which I'm not sure why. Any help would be great or I'm out some money for trying to be nice... thanks in advance!
Anyone please!
Have you tried philz recovery?
bensey said:
Anyone please!
Click to expand...
Click to collapse
I have this phone and updated few days ago with 4.4 version. Philz recovery for meliusrlts works with it without any problem. Bro can you make a debrick img from your phone? I have bricked my phone.
IHelp, Bricked Phone SGH-L600
ashikrobi said:
I have this phone and updated few days ago with 4.4 version. Philz recovery for meliusrlts works with it without any problem. Bro can you make a debrick img from your phone? I have bricked my phone.
Click to expand...
Click to collapse
I am having the same problem, only i am stuck on the Mega Galaxy logo screen, i rooted my device ans updated the newest firmware and i cannot figure out how to get it to work. I tried everything. I also can get into the recovery but it reads there is no operating system on my phone are you sure you want to reboot, GOD what can i do am going nuts as i rely on my phone 100 percent job related purposes, please! someone HELP!!!!
Its not a hard brick dont worry
dreamgirl2011 said:
I am having the same problem, only i am stuck on the Mega Galaxy logo screen, i rooted my device ans updated the newest firmware and i cannot figure out how to get it to work. I tried everything. I also can get into the recovery but it reads there is no operating system on my phone are you sure you want to reboot, GOD what can i do am going nuts as i rely on my phone 100 percent job related purposes, please! someone HELP!!!!
Click to expand...
Click to collapse
Dont worry its not a hard brick. Try to flash the stock rom with odin. It will solve the problem.

[Odin] [Stock Kernel] [G900T-G900TUVU1GQC2] GPE1

Stock kernel for G900T Marshmallow this is pure stock base on CSC/ PDA/G900TUVU1GQC2 with latest Security Patch Level 2017-03-01 Baseband GPE1
Install using AP tab in odin to flash.
Thanks to
SamMobile.com for Firmware SM-G900T
[Script][Tool] how to create a tar.md5 file from img For Odin By mkh.mourad
download link
https://drive.google.com/open?id=0Bx6VoaUTduGhb2F6azBVT0JRUjA
thanks.
can you please share the modem for GQC2.
shoiebarshad said:
thanks.
can you please share the modem for GQC2.
Click to expand...
Click to collapse
Hi, download these files
https://drive.google.com/open?id=0Bx6VoaUTduGhbVhMRkpTR2E5cE0
install Samsung USB drivers to your PC if you dont have them
then go to download mode press your phone's power button then click on restart then click on download
it will put your phone in download mode, if you have custom rom with 5 way reboot, if not then use old button method to get into download mode.
use USB cable to attach phone to PC
then open Odin3 v3.10.7.exe file and use CP to add modem.bin it
then click on start, it should say pass and restart the phone, that should put the newest baseband, please let me know if you need any help. Thanks
Which ROMs should this kernel be used with? Only those based on stock 6.01?
Ok I had quite the time when I tried to use Flashfire to update OTA it broke my modem and boot. I had to use the recovery files and go back to 5.1.1 with the 4 recovery files in Odin3. After recovery I then restored the rooted stock ROM and flashed the modem for G900TUVS1FOL1 as TWRP could not restore the modem at all said it was read only
Wow! This update sucks! It breaks external SD storage and the phone is overheating to the point that it about burns my fingers. I am going back! Be smart STAY AWAY from this **** update! It will destroy your phone seems S5 can not handle it properly. I even did a factory wipe and no go.
a-raccoon said:
Which ROMs should this kernel be used with? Only those based on stock 6.01?
Click to expand...
Click to collapse
most of the ROM out there using SU if you want to use Magsik then you have to use stock image for Magisk to install properly.
molitar said:
Ok I had quite the time when I tried to use Flashfire to update OTA it broke my modem and boot. I had to use the recovery files and go back to 5.1.1 with the 4 recovery files in Odin3. After recovery I then restored the rooted stock ROM and flashed the modem for G900TUVS1FOL1 as TWRP could not restore the modem at all said it was read only
Wow! This update sucks! It breaks external SD storage and the phone is overheating to the point that it about burns my fingers. I am going back! Be smart STAY AWAY from this **** update! It will destroy your phone seems S5 can not handle it properly. I even did a factory wipe and no go.
Click to expand...
Click to collapse
This is Marshmallow Kernel, boot.img it wont work with Lollipop whats your phone model #?
zfk110 said:
This is Marshmallow Kernel, boot.img it wont work with Lollipop whats your phone model #?
Click to expand...
Click to collapse
Samsung Galaxy 5 from T-Mobile as shown here.
I have gone back to 5.1.1 and waiting for the release of Oneplus 6T phone now as I am sick of Samsung BS with Knox and voiding warranty if rooting phone. Do not need to worry about that with Oneplus.
molitar said:
Samsung Galaxy 5 from T-Mobile as shown here.
I have gone back to 5.1.1 and waiting for the release of Oneplus 6T phone now as I am sick of Samsung BS with Knox and voiding warranty if rooting phone. Do not need to worry about that with Oneplus.
Click to expand...
Click to collapse
odin MM stock
https://androidfilehost.com/?fid=673368273298945491
G900TUVU1GQC2_G900TTMB1GQC2_G900TUVU1GQC2_HOME.tar.md5
then install the TWRP
https://dl.twrp.me/klte/twrp-3.2.3-0-klte.img.tar.html
then install this ROM
https://forum.xda-developers.com/galaxy-s5/development/rom-gromv6-stock-stable-smooth-fast-t3406315
you will have custom rom, TWRP, and root with MM
Thanks will try that ROM. Is there a Kernel that works with it with cif support?
zfk110 said:
odin MM stock
https://androidfilehost.com/?fid=673368273298945491
G900TUVU1GQC2_G900TTMB1GQC2_G900TUVU1GQC2_HOME.tar.md5
then install the TWRP
https://dl.twrp.me/klte/twrp-3.2.3-0-klte.img.tar.html
then install this ROM
https://forum.xda-developers.com/galaxy-s5/development/rom-gromv6-stock-stable-smooth-fast-t3406315
you will have custom rom, TWRP, and root with MM
Click to expand...
Click to collapse
Completely broke my phone.. forget it.. 5+ sucks on S5 and I have gone back to the damn Kitkat that works! This phone can't handle ****ing 5+ worth ****! And the rom you pointed to me is damn 6.0.1 which is even more broken.. Not only that it broke all my apps on SDcard so now I have to start all over.. This was a horrible recommendation!

Categories

Resources