Hello,
I'm trying to flash a custom recovery on my pocophone f1. I can see it with adb devices and fastboot devices (and the device isn't set as unauthorized). But when I run fastboot flash or fastboot boot or fastboot erase userdata or any fastboot command, none of them seem to work. It just 'loads' for the infinity, not even returning a prompt in the terminal.
I'm using popOS btw.
Any idea of what could be going wrong ?
Related
Please Help
For some reason I can use fastboot commands but not adb.
I'm able to erase the recovery and reinstall a new recovery VIA fastboot
But for some reason thephone still reboots into fastboot mode only
Is there a way for me to reflash the whole system.img and everything to restore this phone using fastboot commands?
Please help..
Dear Member,
I'm new to rooring and flashing custom ROMS...
i have a folio 100 and after a lot of googling and hardwork i finally managed to root my device on windows XP.. then i tried to install Jelly Bean / CM10 (4.1.1) Alpha 2 - 27.09.2012 from http://forum.xda-developers.com/showthread.php?t=1864774 and followed the instructions.
initially when i typed fastboot devices i was getting "? fastboot" and rest of the commands returned 0x2 error.
then i treid
fastboot -i 0x955 erase userdata
fastboot -i 0x955 erase system
fastboot -i 0x955 erase cache
fastboot -i 0x955 erase linux
fastboot -i 0x955 erase recovery
till now everything worked like a charm but when i tried to run the last command
fastboot -i 0x955 flash recovery recovery-cwm-6.0.1.4.img
i'm getting error message "unable to load recoveryxxxx.img"
now i treid to reboot the device and its saying "magic value mismatch" please help me out..
Nonlxpe Menteur
leaderrocks said:
Dear Member,
I'm new to rooring and flashing custom ROMS...
i have a folio 100 and after a lot of googling and hardwork i finally managed to root my device on windows XP.. then i tried to install Jelly Bean / CM10 (4.1.1) Alpha 2 - 27.09.2012 from http://forum.xda-developers.com/showthread.php?t=1864774 and followed the instructions.
initially when i typed fastboot devices i was getting "? fastboot" and rest of the commands returned 0x2 error.
then i treid
fastboot -i 0x955 erase userdata
fastboot -i 0x955 erase system
fastboot -i 0x955 erase cache
fastboot -i 0x955 erase linux
fastboot -i 0x955 erase recovery
till now everything worked like a charm but when i tried to run the last command
fastboot -i 0x955 flash recovery recovery-cwm-6.0.1.4.img
i'm getting error message "unable to load recoveryxxxx.img"
now i treid to reboot the device and its saying "magic value mismatch" please help me out..
Click to expand...
Click to collapse
First, download the latest & most stable ROM (at the moment), including the ROM, GAPPS, recovery-cwm-CM10-A3.img & formatsd.zip
http://forum.xda-developers.com/showthread.php?t=1864774
Actually, you just need to flash the recovery through fastboot, other else can done in the recovery.
1. Copy all the ROM, GAPPS & formatsd.zip into your memory card. Then insert it into your Folio.
2. Run command prompt, make sure your tablet is connected with your PC in fastboot mode.
To erase existing/stock recovery. In command prompt, go into the fastboot program folder and type the following commands
Code:
fastboot erase recovery
3. Copy the CWM Recovery into your fastboot adb folder.
To flash CWM Recovery
Code:
fastboot flash recovery recovery-cwm-CM10-A3.img
fastboot reboot
4. Enter Recovery. Before you begin, wipe everything (except external_sd) in the CWM Recovery, after wiped, you can install the 3 zip files one by one. After finish, just reboot system.
Full procedure also stated in the link I provided, please scroll down.
Hope that helps you.
So did above solution help? I had a similar issue, and I resolved it by just booting the recovery image from fastboot, i.e.
Code:
fastboot boot recovery.img
Once you get into recovery you can flash an image which will in most cases flash a recovery image along with it. If not, you can try to flash the recovery image again once you've done a full wipe from the booted recovery.
Hello to all !
In order to install Lineage OS on my Xiaomi Redmi Note 5, I was trying to flash TWRP as recovery. I was able to run successfully command 'fastboot flash antirbpass dummy.img' to skirt anti rollback, then i execute successfully 'fastboot flash recovery recovery.img' command to flash TWRP, but no way to boot on TWRP.
I tried also to run command 'fastboot boot recovery.img' but while booting it stays stucked on MI logo.
While searching for a solution I inconveniently run command 'fastboot flash boot recovery.img', so now I'm in a bootloop on fastboot mode if I press volume down and power button, or MI logo if I start in normal mode.
I still have access to fastboot commands, do you know how I can do to fix it (and maybe a way to install TWRP correctly) ?
And I can not stop my phone, does it exist a command which allows to do this in fastboot or I have to wait for my phone to be without battery ?
Thanks in advance for your help !
Ivanov93 said:
Hello to all !
In order to install Lineage OS on my Xiaomi Redmi Note 5, I was trying to flash TWRP as recovery. I was able to run successfully command 'fastboot flash antirbpass dummy.img' to skirt anti rollback, then i execute successfully 'fastboot flash recovery recovery.img' command to flash TWRP, but no way to boot on TWRP.
I tried also to run command 'fastboot boot recovery.img' but while booting it stays stucked on MI logo.
While searching for a solution I inconveniently run command 'fastboot flash boot recovery.img', so now I'm in a bootloop on fastboot mode if I press volume down and power button, or MI logo if I start in normal mode.
I still have access to fastboot commands, do you know how I can do to fix it (and maybe a way to install TWRP correctly) ?
And I can not stop my phone, does it exist a command which allows to do this in fastboot or I have to wait for my phone to be without battery ?
Thanks in advance for your help !
Click to expand...
Click to collapse
I guess you have Redmi note 5 - codename: Whyred (Snapdragon 636 and with dual rear camera) so Redmi 5 plus doesn´t have ARB.
If the next recommendation doesn´t work you will find better guidance in the thread for your specific device https://forum.xda-developers.com/redmi-note-5-pro so is slightly different.
Flash again your stock boot image , reboot and check that USB debugging is enabled and start again the process:
Put TWRP in your sdcard and a copy with this name in your adb folder into pc, reboot to fastboot and first just boot to TWRP, don´t flash it in fastboot, use code
Code:
fastboot boot TWRP.img
then in TWRP flash TWRP file and flash dummy.img ARB. In the case that your counter is up to 4 here you will find the file to enable again fastboot mode https://forum.xda-developers.com/redmi-note-5-pro/how-to/index-everything-anti-roll-t3816219
Ivanov93 said:
I still have access to fastboot commands, do you know how I can do to fix it (and maybe a way to install TWRP correctly) ?
Click to expand...
Click to collapse
I will assume that you have the correct TWRP build for your device (do you have vince, or whyred?).
If you have the correct TWRP, then did you flash magisk or lazyflasher after installing TWRP?
MAAAN
Do like this: once you flashed type
Fastboot boot recoveryname.img
Hello - it's been about 10 years since I played with any XDA stuff or custom roms. I have a stock Motorola G Power that bricked itself. It will not boot and recovery mode just gives me "No Command". Only option seems to be factory data reset.
Can anyone suggest a procedure to allow me to either re-install the stock software to get into the phone or recover my data? Sadly I had not backed anything up since last summer.
Should I just try to reflash a stock rom to see if i can get in? Will flashing the rom kill the onboard storage?
Cant find the exact same version either:
SOFIA10/QPMS30.80-63-6-8-5
I found 63-6-8-10 and 63-6-8-3 but not the exact same. Phone is Retail US.
Any help would be appreciated.
Ok found the stock rom that matches 63-6-8-5. Do I just try to flash that back to get back into the phone with my existing data?
Uberhare said:
Ok found the stock rom that matches 63-6-8-5. Do I just try to flash that back to get back into the phone with my existing data?
Click to expand...
Click to collapse
You can try flashing the stock from and just skip the erase userdata step.
The firmware contains a file named flash_file.xml contains the flash commands
You can use Online FlashFile Converter to convert the .XML to simple fastboot commands.
You also should check if getvar is-userspace
Code:
fastboot getvar is-userspace
if yes you need to switch between fastboot and fastbootd
If it's no you don't need to worry about fastbootd
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
You can try flashing the stock from and just skip the erase userdata step.
Click to expand...
Click to collapse
Do I need to unlock the bootloader for flashing an original file?
Uberhare said:
Do I need to unlock the bootloader for flashing an original file?
Click to expand...
Click to collapse
No, you shouldn't need to but it's easier if the bootloader is unlocked.
Unlikely, you can unlock the bootloader now anyways.
Unless you enabled OEM Unlocking in Dev Options already.
If you did enable OEM Unlocking, I would Unlock the bootloader.
[Guide]Un/locking Motorola Bootloader
UnLocking and ReLocking Motorola Bootloader https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a Moto Bootloader Unlocking site Re-Locking see Post #4 More about bootloader UnLocking Post #2 Can my...
forum.xda-developers.com
Are the steps any different if the bootloader is locked? You mention it is easier if it is unlocked.
Thank you for the tutorial.
Uberhare said:
Are the steps any different if the bootloader is locked? You mention it is easier if it is unlocked.
Thank you for the tutorial.
Click to expand...
Click to collapse
Easier may not be the right word.
If the bootloader is unlocked, you are less likely to have issues flashing.
ADB devices - does not return any devices, although I can see the phone is connected with the Motorola recovery tool.
fastboot getvar is-userspace returns:
is-userspace: no
Finished. Total time: 0.002s
I found where fastbootd is.
C:\Android>fastboot getvar is-userspace
is-userspace: yes
Finished. Total time: 0.002s
Uberhare said:
ADB devices - does not return any devices, although I can see the phone is connected with the Motorola recovery tool.
Click to expand...
Click to collapse
adb devices will not work if the device is in fastboot mode.
Use fastboot devices when it's in fastboot mode.
sd_shadow said:
adb devices will not work if the device is in fastboot mode.
Use fastboot devices when it's in fastboot mode.
Click to expand...
Click to collapse
adb devices does not show anything in either mode. That is why I looked for fastboot mode. Should I trouble shoot that first?
This is what I want with the erase commands deleted at the end? The erase commands are what will kill my data or is there something else I need to remove?
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash radio radio.img
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot flash super super.img_sparsechunk.9
fastboot flash super super.img_sparsechunk.10
fastboot flash super super.img_sparsechunk.11
fastboot flash super super.img_sparsechunk.12
fastboot flash super super.img_sparsechunk.13
fastboot flash super super.img_sparsechunk.14
fastboot flash super super.img_sparsechunk.15
fastboot erase carrier
fastboot erase ddr
fastboot oem fb_mode_clear
echo Press any key to restart the phone!
pause
fastboot reboot
exit
Looks like phone doesn't respond to commands in fastbootd only normal.
I successfully ran the batch file, but the phone still doesn't boot. What is my next step? (besides throwing it against the wall!)
Phone accepts all the files for the current version of software, as well as commands to clear some of the labels. So the userdata is still there, I just can't get to it. Can you read these with a jtag like the older phones?
What if I try to roll it forward to Android 11 through the stock roms?
I have bricked my X3 SZ and worked 1 week to get it unbricked (bricked after update of Android 11) myself, even the service centre not able to restore it and told me that may be Motherboard Problem. Finally by flashing Android 11 Stock images (created using OFP to CMD file converter), I restore the phone. I tried with unlocked Bootloader mode, don't know about locked bootloader state.
Simply download the stock images from the link and boot into bootloader mode, connect to PC, open Minimal ADB Fastboot and flash with fastboot commands. Required USB, Realme, Android Drivers to be installed in the PC. All your data will be lost and do it at your own risk.
Download all the images (userdata, recovery, boot, vbmeta & dtbo) and copy to the Minimal ADB Fastboot folder, run the CMD prompt and run the following commands:
fastboot devices (to check whether phone connected successfully or not)
fastboot erase userdata
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot flash userdata userdata.img
fastboot flash dtbo dtbo.img
fastboot reboot
Done.. your X3 SZ must reboot and starts, if not you need to work around or contact SC.. Good Luck
Link Deleted
Thx
EDIT: Very informative and useful!
Cant get magisk_boot.img to work. Going to try orangefox recovery to install Magisk (root).
Tried numerous times to install it (here) took 3-4 hours to get Python to work in windows 7 (cus missing libraries, and newer version dont work). Its bricked the phone 3 times now.
I tried to install TWRP but failed, after I tried Orangefox, successfully installed but not able to boot, rebooting into recovery only, then I flashed only boot image using fastboot and able to boot but lost Custom Recovery. After all I stopped trying anything on X3 SZ
please provide new link