Good morning.
I got this Tablet from my company but it has allready pre-installed some OS that doesnt let it work as a normal tablet,but a company software,so i want to clean it up,and install a android software 4.2 JB or something that could make this tablet to work again as a normal tablet,and not with the company software.
In this link,i tried to download it,but didnt manage to run it,cause at some point the computer needs to recognise the tablet in order to run this file "RKBatchTool" from witch there you can tell the device where to look and get the new OS - Root etc,and that is not possible.
I also tried hitting this aswell , but here i couldnt even get to downloading something ( or i am doing something wrong) cause no files are beeing downloaded from there or something like that.
In general i need to find something that can fit in the Prestigio MultiPad 4 Quantum (OS-Root-Firmware) something that will change the pre-installed things that are allready installed.
I tried to google a lot of things,but no hope :/
Some help pls...
Any hope ?
Any ideas ? (
Thanks in advance.
mpanikos said:
Good morning.
I got this Tablet from my company but it has allready pre-installed some OS that doesnt let it work as a normal tablet,but a company software,so i want to clean it up,and install a android software 4.2 JB or something that could make this tablet to work again as a normal tablet,and not with the company software.
In this link,i tried to download it,but didnt manage to run it,cause at some point the computer needs to recognise the tablet in order to run this file "RKBatchTool" from witch there you can tell the device where to look and get the new OS - Root etc,and that is not possible.
I also tried hitting this aswell , but here i couldnt even get to downloading something ( or i am doing something wrong) cause no files are beeing downloaded from there or something like that.
In general i need to find something that can fit in the Prestigio MultiPad 4 Quantum (OS-Root-Firmware) something that will change the pre-installed things that are allready installed.
I tried to google a lot of things,but no hope :/
Some help pls...
Any hope ?
Any ideas ? (
Thanks in advance.
Click to expand...
Click to collapse
-UP anyone?
Hi,
Just bought this tv-box and while trying to update it with a different rom bricked it. It shows just red LED and nothing happens, also while trying go into recovery (toothpick + power cable).
Does anybody have detailed tutorial how to unbrick the box ?
Thanx in advance.
I am in your very same situation. Tried the sd card burning method and also the usb one, but no success at all. Hope there is some solution.
resadent said:
I am in your very same situation. Tried the sd card burning method and also the usb one, but no success at all. Hope there is some solution.
Click to expand...
Click to collapse
Maybe someone could place a foto with indicated pins (to make circuit on flash chip) to go into recovery mode ?
etemmu666 said:
Hi,
Just bought this tv-box and while trying to update it with a different rom bricked it. It shows just red LED and nothing happens, also while trying go into recovery (toothpick + power cable).
Does anybody have detailed tutorial how to unbrick the box ?
Thanx in advance.
Click to expand...
Click to collapse
Head over to FreakTab, they have tutorials on how to unbrick it
Patrck744 said:
Head over to FreakTab, they have tutorials on how to unbrick it
Click to expand...
Click to collapse
We, or at least I, have tried all the tutorials on freaktab and read a lot of things on the matter but nothing seems to do the trick. It's really frustrating.
rubbish
resadent said:
We, or at least I, have tried all the tutorials on freaktab and read a lot of things on the matter but nothing seems to do the trick. It's really frustrating.
Click to expand...
Click to collapse
There might be a hardware change for those boxes, the Nexus ROM TV Stock thread has pics on what changed. Best to watch that thread since a solution might be posted soon
I am in the same situation. I tried the sd card burning method and also by the usb cable, but no success at all.
I have got m8s pro+ 2/16gb s905x, The device was purchased on the gearbest website.
some news from my yesterday fight:
sd card burning - many variants of rom, after restart, but on the mainboard there was not observed the reset button, only place named "k1" -> I soldered two points from "k1 place" to make a reset
after that
try by male-male usb cable and usb burning tool 2.0.8, Error result: [0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
I tried 4 different firmware's, and the same happens every time. Can anyone suggest something?
I can copy whole error if it can help determine the problem.
found on the internet
Romcode / Initialize DDR / Read initialize status / USB Control setup error
-> An error occurs when memory chips do not match. Firmware with ubut for some, but sew on others. It remains to ask the seller about the original firmware: (or shovel (look) available.
resadent said:
We, or at least I, have tried all the tutorials on freaktab and read a lot of things on the matter but nothing seems to do the trick. It's really frustrating.
Click to expand...
Click to collapse
I'm in the same situation!
gearbest give me a link for downloading yhe firmware but that don't work for me :
mega.nz/#F!gqgXwSCa!sFNDXrV_EMzAYAcJ68dV0w
If that can help someone.
Regards,
Cody57 said:
I'm in the same situation!
gearbest give me a link for downloading yhe firmware but that don't work for me :
mega.nz/#F!gqgXwSCa!sFNDXrV_EMzAYAcJ68dV0w
If that can help someone.
Regards,
Click to expand...
Click to collapse
I gave up after 3 days of wasting time with tools and this box... Ordered xiaomi mi box this time.
etemmu666 said:
I gave up after 3 days of wasting time with tools and this box... Ordered xiaomi mi box this time.
Click to expand...
Click to collapse
I will do the same....
i brick mine.....
Any help?
Where can i find *.img file and instruction to brink back in life?
Please help
I can help. My xiaomi mi box has just arrived, after a couple of hours of testing i can say, put that **** (m8s) to trash, buy xiaomi. I am happy that m8s was hard bricked now.
leonkoum said:
i brick mine.....
Any help?
Where can i find *.img file and instruction to brink back in life?
Please help
Click to expand...
Click to collapse
I trie so many roms... without success....:crying:
Cody57 said:
I trie so many roms... without success....:crying:
Click to expand...
Click to collapse
it's not the deal with ROM but with bootloader and recovery. Because it's not working rest of the problems are what box buy now ? Xiaomi or if are rich, nvidia. Screw that chinese scum. Try MI BOX and you'll find that xiomi is the real proffesional android tv (it's quick, responsive and my wife can handle it so it's the best user freiendly commercial )
etemmu666 said:
it's not the deal with ROM but with bootloader and recovery. Because it's not working rest of the problems are what box buy now ? Xiaomi or if are rich, nvidia. Screw that chinese scum. Try MI BOX and you'll find that xiomi is the real proffesional android tv (it's quick, responsive and my wife can handle it so it's the best user freiendly commercial )
Click to expand...
Click to collapse
I have a nvidia shield and I order a xiaomi mi box....
it was just to test a new box and it wasn't too bad.... before testing a new firmware
HELLO the solution for reinstall your rom
hello i have found the solution for you i have received my mecool m8SPRO+ today and i search button recovery
i have found this on freaktab :
You need to press the hidden reset switch (accessed via pinhole on bottom of case) when you connect the USB cable, and it's got to connect to the USB OTG jack, which is the one closer to the power jack.
or see on this video youtube on front panel : xxxxs://XXXX.youtube.com/watch?v=WpThZ2sgkhUt
or maybe same at this video an other place : xxxs://youtu.be/N27pAxtcDSg?t=268
if is not clic take a pinhole if is ok you arrived after bootloader MECOOL ON menu
and take a factory reset
if you don t boot
try method with microsdcard take on sdcard the firmware ota here only the file M8SPRO ota
xxxxs://mega.nz/#F!gqgXwSCa!sFNDXrV_EMzAYAcJ68dV0w
and renom on update.zip
then take power off if is ok you screen apperead with logo android green updating
or do method with usb burning tools
replace xx on web link the correct http
Unbrick the M8S Pro+ 2/16
Hi everyone,
I know how you're guys feel... Is there any new idea or suggestions to unbrick the devices?
After OTA Update the box only shows red and blue at the same time, no boot, no detection of windows with reset button or / with holding the circuit shortcut at "K1".
Can't believe that Amlogic is even worse than the Rockchip boxes to unbrick...
How to factory reset mecool m8s pro plus ? S905w android tv os
Guys i am in trouble with new mecool m8s pro plus ATV i bought..
I am new to xda ..
On the setup
Ipaired my remote
And then connected to my wifi
I then chose the option to put my email and password for the account..it signed in but in the end it was asking for location access i gave it but then i receive an error saying google sign in has stopped
And now i am stuck ..even whei restart box always stuck at the same loop
Guys i dont know what to do...i havent even seen its home screen ..i am in the loop of setting up device
I think maybe faftory resetting it may solve it...but i dont know how to do it ..as i dont know how to open recovery mode...
Hi All,
I just got a mxq pro 4K S905W android 7.1.2.
In order to use an app (which detect root), i have to remove the pre-installed root. By looking at some forum i found a solution which consist to install superSU first to be able after to unroot my device.
After I installed SuperSu i rebooted and got stuck on "android" logo.. I tried a factory reset from recovery menu but nothing changed...
Now i want to try to install a fresh FW but i'm not able to found it out, i can only find FW for S905 or S905X but not for S905W.
Can someone help me on this issue. Or at least point me to the right FW (by the way i don't care to have android 7.x, 6.x is Ok).
Thanks!
edit: I tried to install S905X FW for android 6.0, but it failed. I think because downgrade are not allowed.
Do you think i can install FW for a different but really similar box like w95 tv box (found 7.1.2 fw for it)?
David_shimo said:
Hi All,
I just got a mxq pro 4K S905W android 7.1.2.
In order to use an app (which detect root), i have to remove the pre-installed root. By looking at some forum i found a solution which consist to install superSU first to be able after to unroot my device.
After I installed SuperSu i rebooted and got stuck on "android" logo.. I tried a factory reset from recovery menu but nothing changed...
Now i want to try to install a fresh FW but i'm not able to found it out, i can only find FW for S905 or S905X but not for S905W.
Can someone help me on this issue. Or at least point me to the right FW (by the way i don't care to have android 7.x, 6.x is Ok).
Thanks!
edit: I tried to install S905X FW for android 6.0, but it failed. I think because downgrade are not allowed.
Do you think i can install FW for a different but really similar box like w95 tv box (found 7.1.2 fw for it)?
Click to expand...
Click to collapse
I have a w95 box and had the same problem after installing SuperUser the box is stuck on "Please Wait" boot.
There is a Reset button on the base of the device but it seems to be inoperative ... I had the box for 2 days and it is now a paper weight (not eve it is really tiny and light).
There isn't seem to be a way to access the bootloader or Recovery...
Really frustrated now.
905x & 905w use different boards.
At the moment SuperSU will install but if you update it it will bootloop your box.
Look at other s905w forums I think there is a firmware for a s995w board but I don't have the link right now.
It could be in freaktab Forum
mxq pro 4k botloop after superSU update
any suggestions about this problem? I can't find new firmware. What can I do now?
pkatsifaras said:
any suggestions about this problem? I can't find new firmware. What can I do now?
Click to expand...
Click to collapse
https://www.chinagadgetsreviews.com/download-android-7-1-stock-firmware-mxq-pro-4k-tv-box.html
---------- Post added at 02:58 AM ---------- Previous post was at 02:55 AM ----------
rjbweb said:
I have a w95 box and had the same problem after installing SuperUser the box is stuck on "Please Wait" boot.
There is a Reset button on the base of the device but it seems to be inoperative ... I had the box for 2 days and it is now a paper weight (not eve it is really tiny and light).
There isn't seem to be a way to access the bootloader or Recovery...
Really frustrated now.
Click to expand...
Click to collapse
https://www.chinagadgetsreviews.com/download-amlogic-burn_card_maker-v2-0-2.html
PRO 7 PLUS A ROM TO GLOBAL(PRO 7 PLUS M793Q)
"1. Download Flyme 6.7.10.31 beta rom from official chinese Flyme site and put it to your phone's main folder
2. Enter Recovery mode (Volume Up + Power), select "Update firmware" and "Wipe data", then wait until the update is done
3. Download Flyme 6.1.2.0G rom from official site and also put it to your phone just like the chinese rom
4. Enter Recovery mode again and do the same things - select "Update firmware" and "Wipe data", then wait until the update is done
Good luck with this guide and dont forget to wipe twice your device phone."
Hi everyone,I managed to succesfully install it with the given steps above. Thanks a lot. But, I want to switch to "A(Chinese)" from "Global" software again. I tried the methods i already knew but i get the error "too old". What should i do? Is there anyone tried both softwares and can help me out?I want to go back to A(Chinese) version of the software from Global version. How can i do that? Please help.
ModelRO 7 PLUS M793Q
up Is there nobody to help?
its is not possible if u update your chines A with G the phone id change too .. so you stuck on that unless Meizu do something about it
Lazohiwa said:
its is not possible if u update your chines A with G the phone id change too .. so you stuck on that unless Meizu do something about it
Click to expand...
Click to collapse
If the friend who made the share had caught this warning. Because no software is installed on the device.
what is the benefit going from A to G, and vice-versa?
BADA 187 said:
what is the benefit going from A to G, and vice-versa?
Click to expand...
Click to collapse
The chinese version A has no audio resampling built in by default system wide and also gives acces to hidden nfc chip that is restricted to be used exclusively within meizu pay app - payment system in china, which in turn hasnt been launched yet. Not to mention the lack of ubiquitous google eye
It is actively discussed on russian forum 4pda.ru
Hello, i have an MX10 Android TV box that is stuck in bootloader. I Initially tired udating the binaries in SU and it was since stuck on the logo screen so i tried to reset through the AV port and found no Rom/ Firmware or what not so I did a complete wipe/ factory reset.. Now I cant seem to find the right software to download to an SD card to get it back up and running. Im stuck:crying:
Liftkit said:
Hello, i have an MX10 Android TV box that is stuck in bootloader...
Click to expand...
Click to collapse
I don't have this device but, the following is only thread that I can locate that just might have a solution for you that's specific to your device. Read through it and you'll even locate the stock Firmware and others. Don't be afraid to ask for some member guidance within it too.
https://forum.xda-developers.com/showthread.php?t=3747746
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
RK Factory Tool
Liftkit said:
Hello, i have an MX10 Android TV box that is stuck in bootloader. I Initially tired udating the binaries in SU and it was since stuck on the logo screen so i tried to reset through the AV port and found no Rom/ Firmware or what not so I did a complete wipe/ factory reset.. Now I cant seem to find the right software to download to an SD card to get it back up and running. Im stuck:crying:
Click to expand...
Click to collapse
Hi,
Flash firmware directly with your PC, it's easy to do that..
Firmware, see on website geekbuying.com/item/MX10-Android-7-1-2-RK3328-4GB-32GB-TV-Box-386668.html?utm_source=freaktab.com&utm_medium=referral&utm_campaign=lily&utm_term=MX10
Good Luck..
Liftkit said:
Hello, i have an MX10 Android TV box that is stuck in bootloader. I Initially tired udating the binaries in SU and it was since stuck on the logo screen so i tried to reset through the AV port and found no Rom/ Firmware or what not so I did a complete wipe/ factory reset.. Now I cant seem to find the right software to download to an SD card to get it back up and running. Im stuck:crying:
Click to expand...
Click to collapse
MX10 TV BOX
Download nougat firmware - https://naijarom.com/mx10-tv-box
download driver - http://ul.to/0bqfz2v9
- Using pc to extract the 2 zip file
- look for SD_Firmware_Tool.exe in the driver extracted folder
- right click run as administrator
- First Choose removable disc select sdcard
- Second select upgrade firmware
- Third select img file from the extracted firmware folder
- click create and wait till success.
- remove sdcard and input to tv box
- use a plastic Lego stick and input to AV (keep it pressed)
- power on tv box and it will enter to recovery page
- flash from sdcard and wait till success
By the way, this firmware is rooted.
Also tested on Android games support wireless game controller and it works.
Conclusion Android 8 firmware not suitable for mx10 tv box.
Hope this helps.