Hi All,
I have recently updated my Mi A3 to Android 11 and I don't know how to take screenshots.
When searched in Google, for Android 11
I got, the following
Gesture navigation: From the bottom of the screen, swipe up and hold. Choose an open app to screenshot. Tap Screenshot.
3-button navigation: Tap Overview . Choose an open app to screenshot. Tap Screenshot .
2-button navigation (Pixel 3a & earlier): Press the Power button. Tap Screenshot .
But unfortunately I'm unable to find Screenshot icon in any of the above navigation method.
Thanks in advance.
power button + volume down , this is how I'm getting screenshots now
vaxxume said:
power button + volume down , this is how I'm getting screenshots now
Click to expand...
Click to collapse
Thanks for your kind reply.
Power Button + Volume down is not working now, i.e after updating to Android 11.
I have attached the Screenshot !
However, I came to know very recently, that through Accessibility Menu I can take screenshot now.
Anyhow Thanks for the reply.
crsmanian said:
Power Button + Volume down is not working now, i.e after updating to Android 11.
Click to expand...
Click to collapse
This method works on my android 11 (Indian variant) , which I upgraded today, not sure why it isn't working for you.
And I'll check out the accessibility option too, thank you.
vaxxume said:
This method works on my android 11 (Indian variant) , which I upgraded today, not sure why it isn't working for you.
And I'll check out the accessibility option too, thank you.
Click to expand...
Click to collapse
[ Mine is also Indian Variant, prior to Android 11 update, I could take screenshots through Power Button ! However after the update, I'm getting the already attached screenshot screen, where there is no option to take Screenshots.]
As I said, earlier recently only I found taking screenshot through the Accessibility Menu option. Until then I was unable to Take Screenshots, that's why I posted for help.
Thank you.
Related
i am having a problem with my samsung galaxy s2, the power menu doesnt come up when i press the shut down button but it switches off straight away, and the lock screen doesnt work, non of them does. i would be so grate full for who ever can find me a solution
Backup data and factory reset first .
jje
i would have said the same as jje said..
It happens exactly the same
my sgs2 doesn´t block the screen and when I hold the power button it turns off directly, I just Installed ICS and does not work either unlock pattern or pin just turn off the screen and when i push the home button or the porwer button just turn on, does not show any unlock screen, i´ve already done the factory reset and wiped cache and still the same, it´s the same problem i hope that anyone can help us please, thanks
i tried everything but it still doesn't want to work --.
i flashed the gingerbread rom it works perfectaly but slow as hell. even though i admit ics is a great rom to have, but why cant someone find a solution to this stupid problem
socialspider11 said:
i tried everything but it still doesn't want to work --.
i flashed the gingerbread rom it works perfectaly but slow as hell. even though i admit ics is a great rom to have, but why cant someone find a solution to this stupid problem
Click to expand...
Click to collapse
Sounds like a bug. Try flashing DXLP9.
socialspider11 said:
i am having a problem with my samsung galaxy s2, the power menu doesnt come up when i press the shut down button but it switches off straight away, and the lock screen doesnt work, non of them does. i would be so grate full for who ever can find me a solution
Click to expand...
Click to collapse
You're missing your /efs/imei/keystr file. Do a google search for "/efs/imei/keystr fix". You'll need root to apply the fix.
i360* said:
Sounds like a bug. Try flashing DXLP9.
Click to expand...
Click to collapse
This MIGHT work instead of what I suggested above, but I didn't think firmware flashes included or built/rebuilt the keystr file. I could be wrong though.
same problem..fixed after rooting
same problem here...just upgraded from 2.3.5 to Android ICS I9100XWLP7 and facing the exact issue of no screen lock and no power button menu....
Update:
Rooted phone using http://forum.xda-developers.com/showthread.php?t=1501719
and
fixed issue using http://forum.xda-developers.com/showthread.php?p=26542830#post26542830
darengive said:
same problem here...just upgraded from 2.3.5 to Android ICS I9100XWLP7 and facing the exact issue of no screen lock and no power button menu....
Click to expand...
Click to collapse
Dude. Look one post up.
thanks
ctomgee said:
Dude. Look one post up.
Click to expand...
Click to collapse
thanks, wanted to share info...
I had the same problem last week, this thread solved it for me, follow it from the 7th post to the end: http://forum.xda-developers.com/showthread.php?t=1547449&page=2
Thank You, it works a treat.
solved .. atlast
ried everything, then I found a s2 with working power menu and everything .. noted its firmware .. searched on net (link given below) and flashed everything in package .. everything is running as it should .. Sharing it coz I didnt find proper solution for me anywhere .
http://www.trickytweaks.com/i9100xxlsj-4-1-2-galaxy-s2-i9100-jelly-bean-update-tutorial.html
Root your device then open root folder with x-plore app after that go to following directory
efc>imei
Creata a file
Keystr
Openfile as text and write "ON"
Save the file
Tap and hold the file a menu will pop up click on permission
First deselect all boxes and click ok
Again go to permission and select all boxes under read write column click ok
Go to settings>lock screen
Re-enable Lock instantly with power button option.
---------- Post added at 03:17 AM ---------- Previous post was at 02:53 AM ----------
Root your device then open root folder with x - plore app after that go to following directory
efc / imei
Creata a file Keystr
Openfile as text and write " ON " Save the file
Tap and hold the file a menu will pop up click on permission
First deselect all boxes and click ok
Again go to permission and select all boxes under read write column click ok
Go to settings > lock screen
Re - enable Lock instantly with power button option
:good:
---------- Post added at 03:25 AM ---------- Previous post was at 03:17 AM ----------
Root your device then open root folder with x - plore app after that go to following directory
efc / imei
Create a file named "Keystr"
Openfile as text and write " ON " Save the file
Tap and hold the file a menu will pop up click on permission
First deselect all boxes and click ok
Again go to permission and select all boxes under read write column and click ok
Go to settings > lock screen
Re - enable Lock instantly with power button option.
:good:
CyanogenMod is a free, community built distribution of Android 4.2 (Jelly Bean) which greatly extends the capabilities of your phone.
! Remember: ROM in alpha stage. Not ask for ETA or for date of new build. Try to minimize spam on DEV thead
I am develop 4.2.1 CM10.1 for Galaxy Mini and now for SONY Xperia Neo V.
http://www.youtube.com/watch?v=rZ-QJmTBnU4
What working:
-Boot
-Display and touch screen (with multi touch)
-Wi-Fi
-Bluetooth
-HW
-RIL
-GPS & Network Location
-ADB
-USB Mass Storage
-SD Card
-Sound
-Wi-fi tethering
-USB tethering
-Video playback.
What not working (for now, maybe fix soon):
-Camera*** (Its work, but not full.
REPLY ME ON THIS THEAD FOR CHANGE WORKIN\NOT LIST!
DOWNLOAD (WARRING, ITS FOR DEVELOPER PREWIEV ONLY!) :
Download Last (20130518)
Also search and download new Gapps !
Source upload soon...
Fixes, Updates, Mods.
Camera fix
MY
wow! cant wait for this one ^_^ .thank you for supporting neo v
gdeath07 said:
wow! cant wait for this one ^_^ .thank you for supporting neo v
Click to expand...
Click to collapse
+1
Also remember your work from galaxy mini section.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
Nice to see you!
You vanish somewhere and then all of a sudden you start deving a Rom! Lol great!
Eager to check this out!
Sent from my MT11i using xda premium
gdeath07 said:
wow! cant wait for this one ^_^ .thank you for supporting neo v
Click to expand...
Click to collapse
Build released!
AntiBillOS said:
Build released!
Click to expand...
Click to collapse
So, will the new keyboard with gesture typing (with other than English) work on this ROM?
Wow .... This is one great news. can't wait for the day that everything works.
thanks flashing it now on Neo
---------- Post added 13th January 2013 at 12:15 AM ---------- Previous post was 12th January 2013 at 11:29 PM ----------
screen freeze frequently
thanxxx bro for supporting us...
Sent from my MT11i using xda premium
WOW! JB4.2 for my Neo V. Installing now. Will report back.
Thank you! Thank you! Thank you!
My Feedback
1. Booted after installing ROM. Seems to get stuck on the blue "CyanogenMod" bootanimation. The circle stops turning. Remained like that for around 20 seconds. Pressed the Power switch to try to turn the phone off. Instead of turning off, the bootanimation circle resumed turning and booted normally.
2. Turned on wifi. It works.
3. Tried to reboot into Recovery to install GAPPS. Seemed to have gotten stuck with phone saying rebooting but circle was not moving. Pressed the Power switch again and the circle resumed turning. It rebooted but when I saw "Xperia" I pressed the Down Volume switch to get into Recovery, just in case.
4. My phone has now booted up normally (no stuck bootanimation as mentioned in (1) above) after installing GAPPS. Will take it for a test drive.
Further Feedback
1. After rebooting tred to get into Play Store. But can't connect. Wifi is working.
2. Created a Settings shortcut on the Home page. After which I can't return to the Apps drawer. Pressing the Apps Drawer icon has no response. A couple of times the phone dialpad appeared instead. Scrolled left horizontally. The phone froze. Can't get back to the main Home page.
3. Finally pressed the Power switch and selected Reboot. The phone said it was rebooting but the circle was not turning. Waited 20 seconds and pressed the Power switch. The phone turned off. Pressed the Power switch again and got back into Recovery. Restoring a nandroid backup at the present moment.
this rom for neo too ?
neo668 said:
WOW! JB4.2 for my Neo V. Installing now. Will report back.
Thank you! Thank you! Thank you!
My Feedback
1. Booted after installing ROM. Seems to get stuck on the blue "CyanogenMod" bootanimation. The circle stops turning. Remained like that for around 20 seconds. Pressed the Power switch to try to turn the phone off. Instead of turning off, the bootanimation circle resumed turning and booted normally.
2. Turned on wifi. It works.
3. Tried to reboot into Recovery to install GAPPS. Seemed to have gotten stuck with phone saying rebooting but circle was not moving. Pressed the Power switch again and the circle resumed turning. It rebooted but when I saw "Xperia" I pressed the Down Volume switch to get into Recovery, just in case.
4. My phone has now booted up normally (no stuck bootanimation as mentioned in (1) above) after installing GAPPS. Will take it for a test drive.
Further Feedback
1. After rebooting tred to get into Play Store. But can't connect. Wifi is working.
2. Created a Settings shortcut on the Home page. After which I can't return to the Apps drawer. Pressing the Apps Drawer icon has no response. A couple of times the phone dialpad appeared instead. Scrolled left horizontally. The phone froze. Can't get back to the main Home page.
3. Finally pressed the Power switch and selected Reboot. The phone said it was rebooting but the circle was not turning. Waited 20 seconds and pressed the Power switch. The phone turned off. Pressed the Power switch again and got back into Recovery. Restoring a nandroid backup at the present moment.
Click to expand...
Click to collapse
but rom can't be used because the screen every time freeze
back to CM10 .. waiting new build
kuzenka said:
this rom for neo too ?
Click to expand...
Click to collapse
For now its for test
For all: I see on logcat so many errors... I try fix its. Yes freez screen is bad.
2 thing: if you know whats is logcat and you can help fixing - YOU ARE WELLCOME.
AntiBillOS said:
For now its for test
For all: I see on logcat so many errors... I try fix its. Yes freez screen is bad.
2 thing: if you know whats is logcat and you can help fixing - YOU ARE WELLCOME.
Click to expand...
Click to collapse
I was hoping if I can help but sorry im not Dev
Sources?
music.soul said:
Sources?
Click to expand...
Click to collapse
https://github.com/AntiBillOS?tab=repositories
hope we see new build soon
I installed Lineage 7.1.1 and I am on the latest built for 2-14-17.
I have an issue where my home, back button and the app switch button does not work. A quick reboot would fix it, but that's not working now.
Installed button savior and that helped, but I would love my buttons back. Can someone please tell me how to fix this?
Maverick923 said:
I installed Lineage 7.1.1 and I am on the latest built for 2-14-17.
I have an issue where my home, back button and the app switch button does not work. A quick reboot would fix it, but that's not working now.
Installed button savior and that helped, but I would love my buttons back. Can someone please tell me how to fix this?
Click to expand...
Click to collapse
I found disabling Talkback will fix it.
Hey I have a question for you how stable is lineage is is it worth installing g as a daily driver?
hello from greece....
This is my problem after updating to v35 i have major issues with my bluetooth which is sony sbh52...i really dont remember which was my first version but i am certain that was v29 of 7.1.1 nougat...please because its bagging me a lot i reached the ulefone team with numerous email but with no response...does any of you have it.....???please help if you can i have searched everywhere....with the v29 i had no isuues with disconections or what so ever...
p.s the roms from need rom every last of them is not good at all it makes this device so laggy....if anyone can help...thanks again thomas
You can look at the ulefone official explanation: https://www.ulefoneshop.com/blog/ulefone-phone-appears-problems-after-upgrade/
KevinX89 said:
You can look at the ulefone official explanation: https://www.ulefoneshop.com/blog/ulefone-phone-appears-problems-after-upgrade/
Click to expand...
Click to collapse
how to delete history of bluetooth....and i have done the second that is pairing and reboot and pairing....
thanks a lot...
mikrokatevas said:
how to delete history of bluetooth....and i have done the second that is pairing and reboot and pairing....
Thanks a lot...
Click to expand...
Click to collapse
anyone please the bluetooth test with lolipop 5.1.1 and works fine.... If someone has the previous version preferred v29 please help.... The ulefone stuff doesn't respond...
And no from need rom any Roms they provide it stalling the device a lot..... It became extremly laggy....
mikrokatevas said:
how to delete history of bluetooth....and i have done the second that is pairing and reboot and pairing....
thanks a lot...
Click to expand...
Click to collapse
Here are the steps to clear your Bluetooth cache:
1, Go to Settings
2, Select “Application Manager”
3, Display system apps (you may need to either swipe left/right or choose from the menu in the top right corner)
4, Select Bluetooth from the now larger list of Applications
5, Select Storage
6, Tap Clear Cache
7, Go back
8, Finally restart the phone
Pressed volume down & power button my xiomi8 lite while it was updating miui system
I was surfaceing on my cell and it appeared a new miui system update and decide to update by new one system, however i remembered i had an app of payment and it will not works anymore after system get updated, so I change my mind and wanted to power down in order to not updated but it did not work so i pressed volume down & power button my xiomi8 lite after that update was downloaded while it was updating at 39% the older Android 9 miui system by default and it appeared an installation system failed message. I going to attach a photo of my cell what message appears now. Can anyone help me what i can do please
RobertoAlban said:
I was surfaceing on my cell and it appeared a new miui system update and decide to update by new one system, however i remembered i had an app of payment and it will not works anymore after system get updated, so I change my mind and wanted to power down in order to not updated but it did not work so i pressed volume down & power button my xiomi8 lite after that update was downloaded while it was updating at 39% the older Android 9 miui system by default and it appeared an installation system failed message. I going to attach a photo of my cell what message appears now. Can anyone help me what i can do please
Click to expand...
Click to collapse
Oh boy you messed up on that one, maybe try to ask there: https://forum.xda-developers.com/mi-8-Lite/help
And search for recovering tools provided by Xiaomi on the forum, hope you'll have better guidance there, because I'm very approximative with Xiaomi devices, I don't know them well yet.
Good luck
Raiz said:
Oh boy you messed up on that one, maybe try to ask there: https://forum.xda-developers.com/mi-8-Lite/help
And search for recovering tools provided by Xiaomi on the forum, hope you'll have better guidance there, because I'm very approximative with Xiaomi devices, I don't know them well yet.
Good luck
Click to expand...
Click to collapse
Thanks man