Hi i have Amazfit GTS i paired it with my Zepp app next i change some settings and app finded new update.
After update the watch in "boot loop" mode. I unpair with my app and i would pair agin but the code QR is not show.
I cant pair, on screen is only logo amazfit. Phone not see the watch via bluetooth.
I tried hard reset. Push the button for few sec. , for 2 min too. No work
Please i think something happen in firmware. How can i flash manualy? what cable, what app?
Is it possible?
Any solutions?
I have the same problem since September last year. I ran out of battery and when I put it on charge it went into bootloop. It is not recognized by the phone, the amazfit application sees it for a few seconds but cannot connect to it. Did you manage to solve it somehow?
Wait solution here too
Try this.
Delete from phone Bluetooth pair devices
Make a fresh installation of zepp app downloaded from any other app site except Google play and try to download previous version of application
When ready to find from app zepp push the buttons constantly.
How do I connect to zepp if the watch is stuck at the boot logo?
I have the same problem and nothing I do, makes the clock start.
spyrospal is right.
Problem is not in GTS, problem is in your phone.
1. You delete all bluetooth devices from phone
2. Install Zepp APP and open it.
3. Open your gps function in your phone
4. login or register Mi web account
5. Go to devices section in your Zepp APP
6. If there are any devices, delete it.
7. Than add new smart watch
8. Zepp APP finds your GTS device
9. Pair your GTS
10. Probably Zepp APP will upload new firmware
11. Thats all.
AbdullahManaz said:
spyrospal is right.
Problem is not in GTS, problem is in your phone.
1. You delete all bluetooth devices from phone
2. Install Zepp APP and open it.
3. Open your gps function in your phone
4. login or register Mi web account
5. Go to devices section in your Zepp APP
6. If there are any devices, delete it.
7. Than add new smart watch
8. Zepp APP finds your GTS device
9. Pair your GTS
10. Probably Zepp APP will upload new firmware
11. Thats all.
Click to expand...
Click to collapse
I try without success. Other tip?
Try making pair the watch without QR.make sure that the watch is also deleted from bluetooth paired devices.when try to find the watch from zepp app , push both bottons together rapidly.
When mine is bricked like this ,I try this and always locate the watch.
spyrospal said:
Try making pair the watch without QR.make sure that the watch is also deleted from bluetooth paired devices.when try to find the watch from zepp app , push both bottons together rapidly.
When mine is bricked like this ,I try this and always locate the watch.
Click to expand...
Click to collapse
Amazfit GTS have one bottom!
After contacting amazfit support. They told me there "is no way to flash the device, only let the watch battery run out and recharge to try again. if the issue persists contact seller to warranty"
Better to buy an apple watch. Why any software problem just connect to itunes and flash the device. They sell a device with 0% repair and such a simple thing to flash the firmware.
slipttees said:
Amazfit GTS have one bottom!
Click to expand...
Click to collapse
Make a restart,on the amazfit logo Push the ONE button and together push the screen down right simultaneously until this will detect the device
spyrospal said:
Make a restart,on the amazfit logo Push the ONE button and together push the screen down right simultaneously until this will detect the device
Click to expand...
Click to collapse
I has try press bottom e swipe down and right e not work. Maybe no make right way. U can describe?
Make a restart ,at the same time make on your zepp app to search the watch without QR code,at the time that the zepp app is searching the watch ,your gts has to be on the amazfit logo (after restarting),then you push the screen around and at the same time you presh the button simultaneously.
Try this many times and it will work
spyrospal said:
Make a restart ,at the same time make on your zepp app to search the watch without QR code,at the time that the zepp app is searching the watch ,your gts has to be on the amazfit logo (after restarting),then you push the screen around and at the same time you presh the button simultaneously.
Try this many times and it will work
Click to expand...
Click to collapse
I try several times and not work for me :-(
My friend ,as I see you got it,but in the wrong way.
Make tap tap tap tap on screen and to the button ,but together as you make now.
Don't hold your fingers to the screen and the button, just push them fast many times,it will work 100%
Don't forget your finger that you will use to your screen put it down right
spyrospal said:
My friend ,as I see you got it,but in the wrong way.
Make tap tap tap tap on screen and to the button ,but together as you make now.
Don't hold your fingers to the screen and the button, just push them fast many times,it will work 100%
Don't forget your finger that you will use to your screen put it down right
Click to expand...
Click to collapse
Tap tap tap many times in the buttom and screen down right same time. I got a cramp in my fingers and it didn't work.
Thanks for try help me.
I'm going to make a video of him burning and telling people not to buy this ****. I lost my watch after an update. Their support is so ridiculous that I hope no one here needs it.
Please try when you have a free time,relaxed.
I know the support team of them is the worse ever,just please think your money and wait to see if you manage to fix it.
I forget something to ask you.Do you have it on your mobile phone as a paired device at the bluetooth manager? If yes please delete it from pair devices and try again just pushing the screen and the buttons while the program makes it scan.
Try also to change mobile,find one old mobile , install the zepp app and try again.
spyrospal said:
Make a restart ,at the same time make on your zepp app to search the watch without QR code,at the time that the zepp app is searching the watch ,your gts has to be on the amazfit logo (after restarting),then you push the screen around and at the same time you presh the button simultaneously.
Try this many times and it will work
Click to expand...
Click to collapse
I tried this method with my GTR 2. My watch shows in "Scan without QR". Zepp app keep pairing one side and my watch keep bootloop other side. at the end app tired
Related
So, I just received my watch today and I was excited to set it up, but one thing didn't work. The Watch Face Settings inside the Mi Fit app doesn't seem to do anything in the sense that when I try to access it, there is a blue line showing something is loading, but then I am greeted with a blank page.
It need active internet connection to load the watchfaces.
Check your phone Internet connection.
ebeldamasta said:
It need active internet connection to load the watchfaces.
Check your phone Internet connection.
Click to expand...
Click to collapse
I'm connected over Wi-Fi. I should probably try on 4g.
Adrosmart said:
So, I just received my watch today and I was excited to set it up, but one thing didn't work. The Watch Face Settings inside the Mi Fit app doesn't seem to do anything in the sense that when I try to access it, there is a blue line showing something is loading, but then I am greeted with a blank page.
Click to expand...
Click to collapse
I have the same problem
I've been having the same issue since I bought the watch. It's pretty frustrating, since I am not a big fan of the stock watch faces. I've already tried clearing the data of the app and setting up the watch from scratch.
Ni4y said:
I've been having the same issue since I bought the watch. It's pretty frustrating, since I am not a big fan of the stock watch faces. I've already tried clearing the data of the app and setting up the watch from scratch.
Click to expand...
Click to collapse
Did it help? Yesterday I restored my watch and mifit app to factory settings but this did not help
hello , to all
to use Watch Face Settings you can try to use some VPN software to change location to Hong Kong for example...
- sometimes here are problems with connecting to amazfit server from non-china locations((
I tried using HonkKong server using Turbo VPN(android app), doesn't seem to be working. If it works for anyone do let us know
Can't check it now... I have this problem earlier.
Now watch face settings is working (Mifit 3.2.3.1 LolexMod, Bip FW v0.1.0.43)
I try to use Honk kong VPN
And.. The same problem, i cant see watch faces... My version is 3.2.7.2
Same problem. Installed a new watch face through the application notify & fitness for amazfit
Fixed
I managed to fix the error by connecting the Bluetooth clock and being connected, erase the cache and that's it.
I hope it will be helpful.:good:
Stovetoplime said:
I managed to fix the error by connecting the Bluetooth clock and being connected, erase the cache and that's it.
I hope it will be helpful.:good:
Click to expand...
Click to collapse
Just got my bip today and can't see anything on "Watch face settings" page.
Please can you explain your fix in a little more detail please. I tried turning bluetooth on and off, and having wifi on/off but no luck. When you say erase the cache how do I get to that screen? Thanks
I've the same issue. Not yet solved.
Marco1015 said:
I've the same issue. Not yet solved.
Click to expand...
Click to collapse
Seems to be working now, strange
If you login with FB or Google Account please sign out then try to login using Mi Account. That's work for me
riyadibr said:
If you login with FB or Google Account please sign out then try to login using Mi Account. That's work for me
Click to expand...
Click to collapse
1. Unpair Amazfit
2. Sign out Mifit
3. Sign in with Mi Account
4. Pairing Amazfit
5. Done, open Watchface Settings
riyadibr said:
1. Unpair Amazfit
2. Sign out Mifit
3. Sign in with Mi Account
4. Pairing Amazfit
5. Done, open Watchface Settings
Click to expand...
Click to collapse
This doesnt work. It seems something is broken on the page that gives all the list of watch faces. I have another app for custom watch faces which shared a message about something on similar lines.
Solution
I had the same issue, "Local watch faces" is not showing anything, but they seem to be loaded under "Online watch faces". So download a new watch face, for example with "Amazfit Bip & Cor WatchFaces" app, remember the watch face your are substituting. Then go to "Online watch faces", choose the watch face you have substituted (which will still show the original image, not the new watch face!!!) and there you go, your chosen watch face will be loaded to the watch, not the original one.
Quiet confusion really, took me a while to realize this.
Solved blank watch face settings for Amazfit cor
Hello,
I deleted all watch faces downloaded for my amazfit cor. I reinforced to close my Mi app.
I reopened Mi app and reopened Watch Face Settings. It worked again to me.
Hopefully it helps you guys with the same issues as mine.
I hope someone can help, I have installed watch droid on both watch and phone, however when I try to run watch droid, it detects my watch and then informs me that I have and update. +++ then a big green tick appears.
When the watch tries to update I get a message . "your watch has blocked the update for security purposes" then the connection drops out.
Then i only get an option to press agree, if I press disagree or the 'X' I get "install failed" message and the loop starts again.
I was really hoping for Watch Droid phone to work as it seemed like the most useful app for the Amazfit so far.
Any suggestions would be greatly appreciated!!!
Thanks internet people.
you need to install manually the apk, or use this installer:
https://youtu.be/-3jpsPJTrWg
Watch wear assistant / phone app
I was attempting to use this app with a KW88 smartwatch. Downloaded fine to the watch but here is my problem. I have an iPhone. Is there a way or alternative app for iPhone? Thanks!
Forjas said:
I was attempting to use this app with a KW88 smartwatch. Downloaded fine to the watch but here is my problem. I have an iPhone. Is there a way or alternative app for iPhone? Thanks!
Click to expand...
Click to collapse
Nope, if you wan't 3rd party devices to work correctly with you smartphone you should have bought an Android phone. If you want a smartwatch that works correctly with an iPhone your options are the apple watch, the apple watch or the apple watch.
KW88 smartwatch
If there is an option to make calls and respond to text messages on the KW88 then which app needs to be downloaded? WII watch does not offer those options. KW88 connects to both android and OIS.
QUOTE=shadowcaster666;76196223]Nope, if you wan't 3rd party devices to work correctly with you smartphone you should have bought an Android phone. If you want a smartwatch that works correctly with an iPhone your options are the apple watch, the apple watch or the apple watch.[/QUOTE]
Forjas said:
If there is an option to make calls and respond to text messages on the KW88 then which app needs to be downloaded? WII watch does not offer those options. KW88 connects to both android and OIS.
Click to expand...
Click to collapse
If your watch's companion app on iOS doesn't do what you need, then there is not much you can do. Watch Droid works only with Android (you can infer that from its name). It should work with KW88, but you'd better try to get some help from the watch's specific forum or some Watch Droid forum (I don't know if there is one for it here on XDA). Good luck.
Works perfectly with a DM2018 (except it increases battery consumption quite a lot if you stay connected 24/24): it is the only one I found that keep the BT connection stable (the recommended FunDo in its standard version just didn't accept my phone number -that of the SIM card- as a valid one. The pro version did but did not maintain a stable BT connection. If you install from apk you must first authorize installation from 3rd party sources. I tested BT Connection and a few others: same instability.
treeml1 said:
I hope someone can help, I have installed watch droid on both watch and phone, however when I try to run watch droid, it detects my watch and then informs me that I have and update. +++ then a big green tick appears.
When the watch tries to update I get a message . "your watch has blocked the update for security purposes" then the connection drops out.
Then i only get an option to press agree, if I press disagree or the 'X' I get "install failed" message and the loop starts again.
I was really hoping for Watch Droid phone to work as it seemed like the most useful app for the Amazfit so far.
Any suggestions would be greatly appreciated!!!
Thanks internet people.
Click to expand...
Click to collapse
You need to authorize 3rd party apks. Check settings;
Hello. I have some problems with watch droid. With incoming calls, I have a standard call on my watch, not a watchdroid call. How to disable the standard display of a call. In the Amazphite application, I disabled the push notifications. I forbade the Amazite to work in the background and stopped it and now the call goes through the watchdroid, but as soon as I start the amazfit all over again, and I need to go to the settings of the phone to stop it again. Each time there is no desire to do this. Can everything be made easier? And immediately the second question: how do I respond to incoming calls using watchdroid? Now only 3 buttons: without sound, reject, paper airplane (printed answer).
Thank you.
quick question...can i have both amazfit app and watch droid connected? It seems i can only have one or the other
Hello,
I have a Pace for one year and very happy with this watch.
I changed my phone last week from an Iphone to a Pocophone. On IOS, the watch was always connected to the phone whatever the Amazfit app is open or close. But on my Pocophone (Android), if the app is open, I get the notification on my watch, but if I close the app, the watch immediatly disconnect.
New on Android, maybe I forgot something ?
Thank your for your help
xavier1971 said:
Hello,
I have a Pace for one year and very happy with this watch.
I changed my phone last week from an Iphone to a Pocophone. On IOS, the watch was always connected to the phone whatever the Amazfit app is open or close. But on my Pocophone (Android), if the app is open, I get the notification on my watch, but if I close the app, the watch immediatly disconnect.
New on Android, maybe I forgot something ?
Thank your for your help
Click to expand...
Click to collapse
Disable Amazfit app from battery optimization settings to allow it to keep running in background. Maybe some other actions may be needed too, and a Xiaomi user could help you more.
Saratoga79 said:
Disable Amazfit app from battery optimization settings to allow it to keep running in background. Maybe some other actions may be needed too, and a Xiaomi user could help you more.
Click to expand...
Click to collapse
Thank you for your reply.
I tried to change the different baterry optimization, but each time, when I closed the application, the watch still disconnected.
Hi, I own this watch for 2 weeks now and everything was working fine until the day before yesterday, I opened Amazfit app w/o Internet connection (was not aware at the time, automatic task) so I was kicked out from app and been asked to relogin, cool I did so and then my data been wiped: no steps, no sleep, no HR, weight was all that left (and the only thing that is still working).
So I tried to reboot both watch and phone (Xiaomi Mi6), no luck, also tried to let it be and see the other day, no luck, now it is 3rd day when I am keep seeing no data is going through.
I tried to force manual sync on the watch in Settings that went just fine with successful message after 100%, in the end I unpaired watch (factory reset), still no luck.
Someone told me me to try N&F app and it does read all the data, so how come official app does not, any ideas?
BTW: from time to time Amazfit app shows me that there is not connected devices and when I go to my profile under Amazfit Stratos it shows "Not activated". I activate it every time it says not activated, but it changes nothing about data.
Hello bro, got same problem, Amazfit app stopped syncing activities for few days now. However it's syncings steps properly. Can't work it out, hope someone will help us.
hello, sometimes this happens when there are problems with servers from Xiaomi. That is why there are problems with synchronization and downloading weather data. Usually it lasts from several hours to several days, it is not a continuous problem, There are also problems logging in to the Xiaomi account. I recommend patience and wait a few days.
Wysłane z mojego MI 8 Explorer Edition przy użyciu Tapatalka
I hope so, but when servers are down or something is wrong with them it should not work for everyone and not just one person I believe.
I am worried because I have been using huami bands for years now and nothing like this has happened in the past (in MiFit app).
It's been a week now, is official app really that bad? On day 1, 2 and 3 I was able to force sync watch from it's settings (of course I was getting nothing in app anyway), then I could not even manually sync it to amazfit servers.
All this time I'm also using Notify & Fitness for Amazfit to store my data (which works fine)..
Same here... when synchronization works, then Strava upload doesnt work. Now Strava work, but synchro with app doesnt. xD
Waiting for Xiaomi respond.
Hi, same problem for me on iOS 13.2 with the last amazfit app 3.4.5
all my sleep, step, heart are synchronized, but all my sport activities won't be synchronized.
i just create a ticket to support.
when i try to force "sync data" on different wireless network, i still have "error, verify your network"
after delete/resintall app on my iphone, i loose all my sport activities on iphone, but, i still have it on my watch. (i just backup my watch!)
[email protected] said:
Hi, same problem for me on iOS 13.2 with the last amazfit app 3.4.5
all my sleep, step, heart are synchronized, but all my sport activities won't be synchronized.
i just create a ticket to support.
when i try to force "sync data" on different wireless network, i still have "error, verify your network"
after delete/resintall app on my iphone, i loose all my sport activities on iphone, but, i still have it on my watch. (i just backup my watch!)
Click to expand...
Click to collapse
Same issue for me, on 25th October all activity information on the Amazfit App has stopped being shown. A few days later the same is also true with the step graphics information. I'm running iOS 13.2.2 and the Amazfit App 3.4.5. What is weird is that the information is being sent to Strava and also being held by Apple Health. Just nothing is being shown on the Amazfit iOS App. Sleep, heart rate are all working OK, it is just that I have not record of steps taken over the day when you click on the Walking Man icon (which takes you to the Steps screen) or any activities logged such as running or walking. Up until now I have been very impressed with the Stratos watch and the APP. Does anyone have a recommended fix yet? Watch has the latest firmware installed. Thx
Same issue for me.....
JoeW99 said:
Same issue for me, on 25th October all activity information on the Amazfit App has stopped being shown. A few days later the same is also true with the step graphics information. I'm running iOS 13.2.2 and the Amazfit App 3.4.5. What is weird is that the information is being sent to Strava and also being held by Apple Health. Just nothing is being shown on the Amazfit iOS App. Sleep, heart rate are all working OK, it is just that I have not record of steps taken over the day when you click on the Walking Man icon (which takes you to the Steps screen) or any activities logged such as running or walking. Up until now I have been very impressed with the Stratos watch and the APP. Does anyone have a recommended fix yet? Watch has the latest firmware installed. Thx
Click to expand...
Click to collapse
Hi,
in fact, i resolve my problem alone (thanks amazfit support :mad : )
Before all, i backup all my watch (with AmazeBKP_v1.2)
IMPORTANT, put the watch in airplane if you don't want loosing all your sport activity into the watch.
i'll explain what i do:
1. put the watch in airplane
2. try to see if the watch is connected to amazfit app, normally no, because it is in airplane.
3. if you don"t see the watch, go to amazfit app, and remove the watch from your account.
4. log off from amazfit app
5. Remove the app
6. reinstall the app !
7. logon with your account
8. add the watch ! ... now, for adding a watch to amazfit you need a QR Code... but, if you want a QR Code, you need to reset your watch ! nooooooooooooooooo !!!!!
open a cmd, go in a folder where there are adb (personnally i use adb from amazeBKP), and type: adb shell am start -n com.huami.watch.setupwizard/.InitPairQRActivity
9. the watch QR code appear, you can add it in your amazfit account.
10. force synchronize data from the watch (need wifi)
11. wait a few minute
With this step my amazfit app work again, and i retreive my 179 Sport session ! OUF !!!
For your information if you don't put the watch in airplane first, when you will remove the watch from your account, the watch will be reset automatically and you loose all !!!
Regards
Everything seems to be fixed by Amazfit!!! Activities are now synchronized!!!
Not for everyone, not for me at least.
Nitter78 said:
Everything seems to be fixed by Amazfit!!! Activities are now synchronized!!!
Click to expand...
Click to collapse
From today for me, sync working too.
In my case I cannot sync sport activities without doing a manual upload first. Amazfit app stays at 10% for more than a minute and then the message disappears.
Anyone else had this problem?
BTW, using a Stratos 3 with 4.2.2.1 ROM
theopulus said:
In my case I cannot sync sport activities without doing a manual upload first. Amazfit app stays at 10% for more than a minute and then the message disappears.
Anyone else had this problem?
BTW, using a Stratos 3 with 4.2.2.1 ROM
Click to expand...
Click to collapse
Yes, same problem here.
Tried for few times to unpair/pair, reinstall app, but last activity is from 17.11, although I have 3 more... reported the issue through the app few times and got back thanks from customer service but nothing else happens.
BTW, how do you upload manually? Thanks.
---------- Post added at 10:15 AM ---------- Previous post was at 10:12 AM ----------
intrak said:
From today for me, sync working too.
Click to expand...
Click to collapse
For how long has been it failing? Almost one week for me, don't know what to do or if it will fix automatically after X days...
Getting annoyed.
Thanks.
3 weeks for me and still counting... I have this watch for 4 weeks, so it does not work 90% of the time.
Yesterday after unpair/pair and removing the app worked for a while and workout form yesterday was sync ok, but today again nothing happens...
Yes only manual sync is working(using WiFi)
Go in sync menu from watch then manual sync.
Only with this I have my workout.
Don't know if the pb is from the watch or app
winni21 said:
Yes only manual sync is working(using WiFi)
Go in sync menu from watch then manual sync.
Only with this I have my workout.
Don't know if the pb is from the watch or app
Click to expand...
Click to collapse
The bad news is Ultra Mode doesn't have manual sync, so if you use it and there is a workout not syncing, you lose it.
theopulus said:
The bad news is Ultra Mode doesn't have manual sync, so if you use it and there is a workout not syncing, you lose it.
Click to expand...
Click to collapse
The workout you're doing in ultra mode are not visible in normal mode?
hello, i was changing the watchfaces for cutom ones, and after trying one, the GTS was freezed in succesfull synced or installed watchface, i dont remember the message, is the one after change the watchface in the app amazfit. well after that i decide to tunr off it pressing the bottom, i restarted it and after the animation message off amazfit it was black. after being black and not response during like 30s its restart itself, and that in loop. restart, aniamtin, black, restart, aniamtion, etc..... pls someone know how to fix it???? i tried to charge it and its charges prefect, its appears the anaimation of charging etc, but the problem is taht, is in bootlloop xd. pls someone who know who to fix it answer me pls :crying::crying::crying::crying:
its fixed. for fix it, put to charge. go to amazfit app and change the watchface for one of the app and it fixed itself. use this if someone have this problem
Hi, thanks for posting your fix.
Mine got rebooting in a loop after freezing when changing the watchface.
I though it was a problem with the watch itself...
Tried changing the watchface while charging like you sugegsted. It doesn't work at the first time, neither resetting to the default view on the device from Notify app, but setting a watchface from the app repositository did the magic !
Now I am playing with watchfaces again, in a regular operative device thanks to you sharing your issue and fix.
hi, i habe the same Problem with the boot loop. but how can you connect to the watch while charging? thx
Thank you for sharing the solution! Had the same problem and fixed it within minutes after reading your post.
Simply connect to the charger, GTS switches to stock charging watchface, and you use the official app to upload an official watchface! Simple as that.
I try it, but my phone can't connect to gts I put it to charge it's working, but when i open the amazfit app, can't see the watch.
rquattro said:
Thank you for.
sharing the solution! Had the same problem and fixed it within minutes after reading your post.
Simply connect to the charger, GTS switches to stock charging watchface, and you use the official app to upload an official watchface! Simple as that.
Click to expand...
Click to collapse
Same problem with GTS watch face
EJIS said:
hello, i was changing the watchfaces for cutom ones, and after trying one, the GTS was freezed in succesfull synced or installed watchface, i dont remember the message, is the one after change the watchface in the app amazfit. well after that i decide to tunr off it pressing the bottom, i restarted it and after the animation message off amazfit it was black. after being black and not response during like 30s its restart itself, and that in loop. restart, aniamtin, black, restart, aniamtion, etc..... pls someone know how to fix it???? i tried to charge it and its charges prefect, its appears the anaimation of charging etc, but the problem is taht, is in bootlloop xd. pls someone who know who to fix it answer me pls :crying::crying::crying::crying:
Click to expand...
Click to collapse
I has the same issue and fixed it by throwing it on the charge and changing the watch face through the Amazfit app.
Amazfit GTR 47 mm Boot Loop Error
Hey Guys!
I have encountered same problem many times. The reason behind this error is incompatible 3rd party watch faces. Don't worry I have the solution as well. Follow below steps and you are good to go.
1. Connect your watch to the charger.
2. Open the app and connect the watch.
3. After successful connection please select the smallest watch face.
4. Install the selected watch face on your Amazfit GTR 47 mm.
5. After installing the watch face, your watch is alive again.
Imran Nazir
i too have experienced same problem. amazefit logo is not going from the screen even on after putting it on charge the amazefit logo is not disappearing from the screen. please someone help me out
@imran___nazir said:
Hey Guys!
I have encountered same problem many times. The reason behind this error is incompatible 3rd party watch faces. Don't worry I have the solution as well. Follow below steps and you are good to go.
1. Connect your watch to the charger.
2. Open the app and connect the watch.
3. After successful connection please select the smallest watch face.
4. Install the selected watch face on your Amazfit GTR 47 mm.
5. After installing the watch face, your watch is alive again.
Imran Nazir
Click to expand...
Click to collapse
Buddy, this is absolutely senseless))) How you can connect watch to app if watch constantly in bootloop mode?! You really think it is possible? ))
hello there, have a boot loop problem with Amazfit GTR-47 and somehow I uninstall the app so now I cant connect the watch to the application ...any suggestion, or I have to check hard durability.
Please any advice from someone who has solved the same problem.
here too. Gts infinity boot loop! help
EJIS said:
its fixed. for fix it, put to charge. go to amazfit app and change the watchface for one of the app and it fixed itself. use this if someone have this problem
Click to expand...
Click to collapse
Thankyou so much! worked on Amazfit X too
I have the same problem and nothing I do, makes the clock start.
May be you try this way:
1. You delete all bluetooth devices from phone
2. Install Zepp APP and open it.
3. Open your gps function in your phone
4. login or register Mi web account
5. Go to devices section in your Zepp APP
6. If there are any devices, delete it.
7. Than add new smart watch
8. Zepp APP finds your GTS device
9. Pair your GTS
10. Probably Zepp APP will upload new firmware
11. Thats all.
When the watch is stuck on amazfit logo, how should I connect the watch with the application, watch is still showing logo and application is stuck on connecting.
AbdullahManaz said:
May be you try this way:
1. You delete all bluetooth devices from phone
2. Install Zepp APP and open it.
3. Open your gps function in your phone
4. login or register Mi web account
5. Go to devices section in your Zepp APP
6. If there are any devices, delete it.
7. Than add new smart watch
8. Zepp APP finds your GTS device
9. Pair your GTS
10. Probably Zepp APP will upload new firmware
11. Thats all.
Click to expand...
Click to collapse
Then. I've tried all tips. I believe I need to rewrite the stock firmware. Has anyone tried?
The firmware is i guess corrupted and customer service of Amazfit is not responding.
dude...
do
farazhasan said:
When the watch is stuck on amazfit logo, how should I connect the watch with the application, watch is still showing logo and application is stuck on connecting.
Click to expand...
Click to collapse
you resolve the issue...
I'm facing the same
can you contact on mail,
[email protected]
farazhasan said:
The firmware is i guess corrupted and customer service of Amazfit is not responding.
Click to expand...
Click to collapse
dude,
could you resolve the issue???
I'm facing the same issue, mine is Amazfit GTR 47mm
can you contact in mail
[email protected]