You need a notification light / LED for your Galaxy S21? With aodNotify you can easily add a notification light / LED directly to Samsung's Always On Display!
You can select different notification light styles and show the notification light around the camera cutout, screen edges or even simulate an notification LED dot in the statusbar of your Galaxy S21! As the notification light is integrated in Samsung's Always On Display it has minimal battery consumption and doesn't drain your battery like other apps which keep your phone awake!
If you don't need the Always On Display, the app can also activate the Always On Display (AOD) only on notifications or show the notification light / LED even without the Always On Display!
With the notification preview feature you can directly see if you have important notifications without waking your Galaxy S21!
MAIN FEATURES:
• Notification light / LED for Galaxy S21, Note 20, S20...
• Low energy notification preview (android 10+)
• Activate Always On Display (AOD) only on notifications
• Charging / Low battery light / LED
MORE FEATURES:
• Notification light styles (around camera, screen, LED dot)
• Custom app / contact colors
• ECO animations to save battery
• Interval mode (on/off) to save battery
• Night times to save battery
• Minimal battery consumption
BATTERY USAGE PER HOUR ~:
• LED - 3.0%
• LED & INTERVAL - 1.5%
• LED & ECO - 1.5%
• LED & ECO & INTERVAL - 1.0%
• NOTIFICATION PREVIEW - 0.5%
• ALWAYS ON DISPLAY - 0.5%
If there is no notification the app consumes almost 0% battery
DOWNLOAD:
NOTES:
• Samsung may block this app with future updates!
• Please check if the app is compatible before updating phone software or always on display!
• Altough we never experienced any screen burn in issues on our test devices, we recommend to not keep the notification light / LED active for a long time! Use at you own responsibility!
"Samsung Galaxy" is a protected trademark of "SAMSUNG ELECTRONICS"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did not test the app on S21 yet, but it should be compatible out of the box!
Will test it when i receive my s21u
Looks interesting, will give it a try when the phone arrives
Jawomo said:
Did not test the app on S21 yet, but it should be compatible out of the box!
Click to expand...
Click to collapse
I have used it on many of my samsung devices. Now it also works perfectly on the note 20 ultra device. As soon as I get my S21 ultra device I’m already putting it up. Basic application.
I've been using this on my S20U, and love it. Will load on S21u when it arrives next Friday.
Just tested. Runs perfectly here on S21!
Works perfectly on S21 ultra device.
it seems impossible make it blink simultaneously the camera led and display border lights. No options here
New beta is online with improved notificaton preview features!
Join beta directly in playstore on aodNotify app page!
Is there any way to dismiss notifications from the AOD without turning on the phone?
Jawomo said:
New beta is online with improved notificaton preview features!
Join beta directly in playstore on aodNotify app page!
Click to expand...
Click to collapse
still miss option to receive both camera lights and borders light togheter.
wolfgart said:
still miss option to receive both camera lights and borders light togheter.
Click to expand...
Click to collapse
No plans for this currently
Been playing with the app on my S21+ since I loved it on my S10+ but running into some issues.
Settings > Colors > Event colors... My screen is completely blank. No options listed on it, not sure if this is normal
Also in the Always on Display section I have it set to always hide but the fingerprint sensor is still lit when the screen is off. Is there a way to get rid of that too?
dansan382 said:
Been playing with the app on my S21+ since I loved it on my S10+ but running into some issues.
Settings > Colors > Event colors... My screen is completely blank. No options listed on it, not sure if this is normal
Also in the Always on Display section I have it set to always hide but the fingerprint sensor is still lit when the screen is off. Is there a way to get rid of that too?
Click to expand...
Click to collapse
Just enable battery notifications in the app.
For fingerprint, please see faq in thr app
Jawomo said:
Just enable battery notifications in the app.
For fingerprint, please see faq in thr app
Click to expand...
Click to collapse
Wow what a shock... 30 seconds of reading your FAQ would have saved me some time. Appreciate the help and keep up the awesome work!
I am using your app and really like it. I have the app enabled for my text messages and just recently, when I get a text message, I get the light where I have it set but I don't see on the screen who the text is from. I have not changed any settings. Would that be something in your app that I am missing? Thanks.
andee39 said:
I am using your app and really like it. I have the app enabled for my text messages and just recently, when I get a text message, I get the light where I have it set but I don't see on the screen who the text is from. I have not changed any settings. Would that be something in your app that I am missing? Thanks.
Click to expand...
Click to collapse
Nevermind. Figured it out. Seems when the app is updated, sometimes different features that were on previously get toggled off.
Can someone explain "Custom night time - Disable the app during this time". I don't see a place to specify the time.
Related
Hi,
I've had my xperia S for a couple of days now and I did not notice a change in brightness depending on the ambient light. I've checked in the screen section under setting and there is no option for auto-brightness unlike my previous android phone (Nexus 1). Does the Xperia S have an auto-brightness option?
Moreover, I'm used to using the pattern lock on my previous phone. With the Xperia S, when I enable the pattern security feature, I am also presented with the normal screen lock (lock/mute). Is there a way to disable that screen?
Thank you in advance
volgis said:
Hi,
I've had my xperia S for a couple of days now and I did not notice a change in brightness depending on the ambient light. I've checked in the screen section under setting and there is no option for auto-brightness unlike my previous android phone (Nexus 1). Does the Xperia S have an auto-brightness option?
Moreover, I'm used to using the pattern lock on my previous phone. With the Xperia S, when I enable the pattern security feature, I am also presented with the normal screen lock (lock/mute). Is there a way to disable that screen?
Thank you in advance
Click to expand...
Click to collapse
If I am not mistaken no SE phone has auto-brightness, reason is nowhere to be found....
The same for the lock screen, most probably the ingenuity of the SE/S engineers stopped after creating Timescape...
gbil said:
If I am not mistaken no SE phone has auto-brightness, reason is nowhere to be found...
Click to expand...
Click to collapse
That is too bad, I really like the auto-brightness feature on phone. It helps improve the battery life.
volgis said:
That is too bad, I really like the auto-brightness feature on phone. It helps improve the battery life.
Click to expand...
Click to collapse
What about widgets? Check them (there was something like Power Widget, or Power Control, can't remember), or you could use external aplication. I think Extended Controls or Free Power Widget got something like that. It is not in Display Settings anymore.
UPDATE:
Power Control (It has Wi-Fi, BT, GPS, Sync and Brightness buttons) Brightness should have 3 settings: Max, auto and minimum.
Cholek3 said:
What about widgets? Check them (there was something like Power Widget, or Power Control, can't remember), or you could use external aplication. I think Extended Controls or Free Power Widget got something like that. It is not in Display Settings anymore.
Click to expand...
Click to collapse
I do use widgets to control the brightness manually (power widgets & beautiful widgets). Both control brightness and power widget even has an auto-brightness check box that has no effect what so ever.
volgis said:
I do use widgets to control the brightness manually (power widgets & beautiful widgets). Both control brightness and power widget even has an auto-brightness check box that has no effect what so ever.
Click to expand...
Click to collapse
if you want to control brightness easy way try this app:
Display Brightness
Woah, wait a minute. No auto-brightness? That can't be. The specs sure indicate there is ambient light sensor. There is indeed no "auto-brightness" box to check off, unlike with other Android devices, but I thought that this new Xperia series is supposed to work like iOS devices do. In other words, you move the slider to determine the *average* brightness of the screen, just the way an iphone or ipad does. The screen gets brighter in with more ambient light and dimmer in darkness, but the average brightness is controlled by the slider.
Most other Android devices use the slider to determine a "fixed" brightness, not an average dynamic brightness.
Are you sure the brightness doesn't change?? I find that hard to believe with an ambient light sensor on board.
The white paper says there is an ambient light sensor.
I just checked the user guide installed on my XPS. It mentioned about light sensor and brightness adjustment.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Open Phonebook and dial *#*#7378423#*#*.
Service Tests → Ambient Light Sensor
It works.
Sent from my SO-02D using XDA
floepie said:
Are you sure the brightness doesn't change?? I find that hard to believe with an ambient light sensor on board.
Click to expand...
Click to collapse
I know it has a sensor, but I could not see a difference. Even when I cover the sensor with my thumb, I could not see the same change in brightness as I am accustomed too on my nexus one.
motionUS said:
The white paper says there is an ambient light sensor.
Click to expand...
Click to collapse
I did not imply that there is no light sensor, just that I couldn't find the auto brighness check box and couldn't notice the change in brightness.
Kneko183 said:
Open Phonebook and dial *#*#7378423#*#*.
Service Tests → Ambient Light Sensor
It works.
Click to expand...
Click to collapse
Thanks a lot! I've checked it and my light sensor works. The change in value seems minimal though. I will play around with the brightness slider to see if I notice it now.
Thanks again!
I created this application for Samsung Galaxy SIII and I guess it might be useful to be used in Samsung Galaxy Note II. Some Samsung Galaxy Note II users reported that this application works properly in their device. So I guess there should be not much differences between Samsung Galaxy SIII and Note II in term of the core software. Anyway, you may report if there is any bugs. Your suggestions and comments are welcomed as well.
Description:
Configure LED color and its flashing frequency for notification as shown below:
- Miss call
- SMS
- MMS
- Gmail
- Calendar reminder
- Hangouts
- *Email
- *Facebook and Messenger
- *Twitter
- *WhatsApp
- *LINE
- *GO SMS Pro
- *Handcent SMS
- *Any 3rd party apps
- Low battery
- Battery charging
- Battery charged
- No signal
- No 3G/4G
- No Wifi
- Silent Mode On
- Mobile Data On
- Wifi On
- Wifi Hotspot On
- Bluetooth On
On Android 4.1 and 4.2, ROOT is required for those mark with asterisk *.
After grant the ROOT permission, you need to restart Light Manager for changes to take effect.
However ROOT is not required anymore from Android 4.3 onwards. You need to enable the Notification Access for Light Manager.
There are two operating modes:
1) Normal Mode - Only LED color for the first notification will be flashing
2) Alternating Mode - A few LED colors will be flashing alternately when multiple notifications are received
Language Translation:
Currently supported language: English, Korean, Chinese, Greek, French, Italian, Portuguese, German, Hungarian, Turkish, Danish, Spanish, Finnish, Dutch, Czech, Slovak, Serbian, Arabic, Croatian, Polish, Slovenian, Russian, Hebrew, Vietnamese, Swedish
You may help to translate the language for this application by editing the spreadsheet below.
https://docs.google.com/spreadsheet/ccc?key=0Al0Sp8o0GtITdDJkWmtEellSUXdQZTFIcWdob3VZU3c#gid=0
Market link:
https://play.google.com/store/apps/details?id=com.koo.lightmanager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For more information, please go to the links as shown below:
Frequently Asked Questions (FAQ)
Original Thread
Thanks for the app! How is the batt consumption of the app? Does it constantly run in background and cause wakeclocks?
Sent from my Note II
awesome app..very useful..!
gtizon said:
Thanks for the app! How is the batt consumption of the app? Does it constantly run in background and cause wakeclocks?
Sent from my Note II
Click to expand...
Click to collapse
Yes, it is constantly running in background and cause wakelock only when you switch to "Alternating Mode".
Battery consumption is depending on your settings.
Minimum consumption would be running in "Normal Mode" without any 3rd party app notification LED enabled.
I got about 0.1% tested with Gsam Battery Monitor in SGSIII.
Looks interesting. What is the main difference between this and Light Flow?
This one does not talk back.
Sent from my GT-N7100 using xda premium
Thanks.
Seems to work well.
Thx a lot ! Looks very nice !
One thing I've noticed is that if I get a notification, the LED will blink as it should.
But if I then swipe away the notification instead of opening it, the LED keeps blinking once you lock the screen.
I have to go into the app that the notification was for in order to stop the LED blinking.
Is there any way to stop the LED if you swipe away the notification?
[edit] This only seems to be a problem when set to "Alternating Mode". When set to "Normal" swiping away a notification stops the LED flashing. I'll leave it set to normal and forego the multicolours [/edit]
Not working on Note 2 rooted.. installed the app, configured colors, gave root, restarted app.. nothing.
For me work well and this app fix the problem when charging and led light show red fade now it show real red thxx
Sent from my GT-N7100 using xda premium
The app is working well!
But is there any possibility to also show the led notifications when the screen is on? So when i play a game or something and my device vibrates i can see what notification i received by looking at the led light.
I can also confirm that it kills the swyping feature of the keyboard just like Light Flow
gabster21 said:
I can also confirm that it kills the swyping feature of the keyboard just like Light Flow
Click to expand...
Click to collapse
Swyping feature still working fine for me.
The add app doesn't seem to work. Otherwise, works well! LED app with none of the talking folders, just what I'm looking for! :good:
EDIT: Stupid me. Just read that you need "alternating mode" to add apps. What's alternating mode and how is it different from normal?
What settings are you guys using for this to work? When I try to do the test nothing happens for me.
I tried light Flow and could only get a single color working (cyan).
Sent from my GT-N7100 using xda premium
Great app, I use it since Light Flow has some bugs in our devices.
gabster21 said:
Looks interesting. What is the main difference between this and Light Flow?
Click to expand...
Click to collapse
Well main difference is that it works flawlessly, when Light Flow once enabled it also enables Talkbalk (I think there's a solution for that posted somewhere) BUT most importantly (for me) it disables the swype-like features on Samsung Keyboard.
+1 to Light Manager
I use no special settings and it just works. Try normal mode though.
gabster21 said:
What settings are you guys using for this to work? When I try to do the test nothing happens for me.
I tried light Flow and could only get a single color working (cyan).
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
No special setting just normal mode. I have tested the colors and it all work. Maybe you got an app that is conflicting with it.
Sent from my GT-N7100 using xda premium
richlum said:
One thing I've noticed is that if I get a notification, the LED will blink as it should.
But if I then swipe away the notification instead of opening it, the LED keeps blinking once you lock the screen.
I have to go into the app that the notification was for in order to stop the LED blinking.
Is there any way to stop the LED if you swipe away the notification?
[edit] This only seems to be a problem when set to "Alternating Mode". When set to "Normal" swiping away a notification stops the LED flashing. I'll leave it set to normal and forego the multicolours [/edit]
Click to expand...
Click to collapse
Yeah, swipe away the notification will not cancel the notification LED. I guess this is a bug which cannot be fixed. For Normal Mode, it can work because the firmware will cancel all notification LED once you have pulled down the notification bar.
Overloaded said:
The app is working well!
But is there any possibility to also show the led notifications when the screen is on? So when i play a game or something and my device vibrates i can see what notification i received by looking at the led light.
Click to expand...
Click to collapse
I guess this function is limited by the manufacturer. Notification LED can only appear when the screen is off.
[CM11][HALO][Active Display] ZenROM [XT1052]
This is a simple CM11 ROM with small additions such as:
- a resizable and movable HALO,
- Active Display (!!!),
- Non-Intrusive Caller ID,
- Status Bar,
- Notification Panel,
- Clock,
- On-Screen Navigation and
- general UI tweaks.
Link: http://goo.gl/mjaGcw
GApps: http://goo.gl/3Qa43p
Screenshots of features:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOURCE - Original ROM: http://teamuscellular.com/Forum/topic/6296-cm11haloactive-display-zenrom-xt1055/
I made it for XT1052 / XT1053.
TESTED.
=========================================================
Question:
By active display, does it function like the stock one (you pick up the phone and the screen will light up itself)?
My answer:
Yes, partially.
Pocket Mode works perfectly - I have tried many ROMs (Gummy, LiquidSmooth), but this has the best implementation of Active Display.
You need to check the settings.
Diplay will light up when:
- any notifications arrives,
- you pull it from the pocket,
- you move your hand about 5 cm above proximity sensor (upper part of the phone)
Motorola uses the gyroscope and proximity sensor, this AOSP Active Display uses only the proximity sensor.
(I need to say that no 3-rd party app can work like Motorola Active Display because it is somehow hard-coded in the framework and in my opinion in the kernel as well.)
Thanks. By active display, does it function like the stock one (you pick up the phone and the screen will light up itself)?
nice glad to see some more development
So what did you change from the original ROM? Anything?
Nice !! :good:
jabza said:
So what did you change from the original ROM? Anything?
Click to expand...
Click to collapse
Only the build.prop in order to be able to install it on my XT1052 - I am running on this ROM and it runs perfectly.
c19932 said:
Thanks. By active display, does it function like the stock one (you pick up the phone and the screen will light up itself)?
Click to expand...
Click to collapse
Yes, partially.
Pocket Mode works perfectly - I have tried many ROMs (Gummy, LiquidSmooth), but this has the best implementation of Active Display.
You need to check the settings.
Diplay will light up when:
- any notifications arrives,
- you pull it from the pocket,
- you move your hand about 5 cm above proximity sensor (upper part of the phone)
Motorola uses the gyroscope and proximity sensor, this AOSP Active Display uses only the proximity sensor.
(I need to say that no 3-rd party app can work like Motorola Active Display because it is somehow hard-coded in the framework and in my opinion in the kernel as well.)
JaroslavHruska said:
Only the build.prop in order to be able to install it on my XT1052 - I am running on this ROM and it runs perfectly.
Yes, partially.
Pocket Mode works perfectly - I have tried many ROMs (Gummy, LiquidSmooth), but this has the best implementation of Active Display.
You need to check the settings.
Diplay will light up when:
- any notifications arrives,
- you pull it from the pocket,
- you move your hand about 5 cm above proximity sensor (upper part of the phone)
Motorola uses the gyroscope and proximity sensor, this AOSP Active Display uses only the proximity sensor.
(I need to say that no 3-rd party app can work like Motorola Active Display because it is somehow hard-coded in the framework and in my opinion in the kernel as well.)
Click to expand...
Click to collapse
This "Active Display" hasn't got breathing option, only the redisplay notifications, and the minimum value is 1 minute (too much. Optimal is 4-5 sec), so this active display useless for me
Yes, it is what I wrote already = this free AOSP Active Display uses only the Proximity Sensor, not the Gyroscope like Motorola AD.
JaroslavHruska said:
Yes, it is what I wrote already = this free AOSP Active Display uses only the Proximity Sensor, not the Gyroscope like Motorola AD.
Click to expand...
Click to collapse
?? Gyroscope sensor and Breathe notifications option is two different things...Dynamic notifications program (Active Display clone) has breathe notification option, and doesn't use gyroscope sensor.
Video record just can set to CIF or QVGA,
Does any patch can fix it?
I'm going to try this. Keep it up, Dev.
Sent from my XT1052 using XDA Free mobile app
So, would this not work for Verizon? I ask because my volume buttons don't work and if the ROM doesn't boot up I won't be able to get back into recovery. Haha
Sent from my DROID MAXX using Tapatalk
The active display doesn't work frequently, and I need to reboot to fix it. Maybe after the screen turn off automatically.
And I can't use head phone. There is no sound.
lihanchen said:
The active display doesn't work frequently, and I need to reboot to fix it. Maybe after the screen turn off automatically.
And I can't use head phone. There is no sound.
Click to expand...
Click to collapse
the stock rom has sensors such as flat_up, flat_down, stowed...
are those available on cm11 and/or this rom?
Great work man, keep it up
Czechnolog said:
[CM11][HALO][Active Display] ZenROM [XT1052]
This is a simple CM11 ROM with small additions such as:
- a resizable and movable HALO,
- Active Display (!!!),
- Non-Intrusive Caller ID,
- Status Bar,
- Notification Panel,
- Clock,
- On-Screen Navigation and
- general UI tweaks.
Link: http://goo.gl/mjaGcw
GApps: http://goo.gl/3Qa43p
Screenshots of features:
SOURCE - Original ROM: http://teamuscellular.com/Forum/topic/6296-cm11haloactive-display-zenrom-xt1055/
I made it for XT1052 / XT1053.
TESTED.
=========================================================
Question:
By active display, does it function like the stock one (you pick up the phone and the screen will light up itself)?
My answer:
Yes, partially.
Pocket Mode works perfectly - I have tried many ROMs (Gummy, LiquidSmooth), but this has the best implementation of Active Display.
You need to check the settings.
Diplay will light up when:
- any notifications arrives,
- you pull it from the pocket,
- you move your hand about 5 cm above proximity sensor (upper part of the phone)
Motorola uses the gyroscope and proximity sensor, this AOSP Active Display uses only the proximity sensor.
(I need to say that no 3-rd party app can work like Motorola Active Display because it is somehow hard-coded in the framework and in my opinion in the kernel as well.)
Click to expand...
Click to collapse
Will update?Nice rom
This active display is generic, right?
Or this is official Motorola AD?
Download now from Google Play Store! And if you like, please leave a rating.
Energy Ring S20 Edition is exclusive for Samsung Galaxy S20, S20 5G, S20+, S20+ 5G, S20 Ultra 5G only.
Similar Apps for other Devices:
Energy Ring - Galaxy S10/e/5G/+
Energy Ring for Galaxy Note 10/5G/+
Energy Bar
Energy Bar Curved Edition for S8/S9/S10/+
Energy Bar Curved Edition for Note 8/9
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Adds a configurable Energy Ring around the camera lens indicating current Battery level. Dive into the various configuration options, not only you can quickly glance and get the battery info but, Energy Ring adds an accent to your phone's camera lens.
Got a full charge? The Ring will be a 360 degree wrap around the front camera lens.
Battery depleting? So will the arc of Energy Ring.
Out of the box features:-
✓ Energy Ring can be configured from a width of 1 pixel to a donut thick ring
✓ Energy Ring puts almost 0% load on CPU, as it wakes up only to reflect any change in battery level
✓ Energy Ring's direction can be configured as clockwise/bidirectional/anti-clockwise
✓ Energy Ring can hide on fullscreen content (apps, videos, images, games etc)
✓ Energy Ring can be configured to change colors automatically depending on the live battery level
✓ Energy Ring could have a mono color/multiple color segments/gradient (pro)
✓ You can literally assign any color in the world for your favorite configuration
✓ Energy Ring has a number of cool animations whenever a power source is plugged into your device
All that is cool! But what about Energy Ring consuming Battery?!
This is one of the most exciting question for me to answer. Energy Ring more than anything understands that you need to utilize your battery efficiently (after all, that's why you installed the App, right? .) Energy Ring sits on the screen silently putting almost 0% load on CPU, if battery level changes, Android wakes up Energy Ring. Once awake, Energy Ring quickly updates itself and goes back to sleep. And to be that extra efficient, the Ring goes on deep sleep when you turn off the screen, meaning it doesn't even read changes in battery level when the screen is off.
Notification Access requirement:
Energy Ring does not read any Notification whatsoever, it merely relies on it to be alive. Be assured that the App does NOT access anything.
Download now from Google Play Store! And if you like, please leave a rating.
Reserved
How does it work in sinc with aodNotify - Notification Light?
Well to add, have been using both, except AODNotify only on screen off and they do work together.
thank you so much!
vid200 said:
How does it work in sinc with aodNotify - Notification Light?
Click to expand...
Click to collapse
vid200 said:
Well to add, have been using both, except AODNotify only on screen off and they do work together.
Click to expand...
Click to collapse
Yes, technically it should work well side-by-side.
tshawaii said:
thank you so much!
Click to expand...
Click to collapse
You're welcome!
avid_droid said:
Nice... Thank you for this
Click to expand...
Click to collapse
Great! Glad you like it!
Tried it, but wierd behavior when going to landscape - ring gets stuck showing in the wrong place on the screen - no longer around the camera, but where it thinks the whole should be even though it's a different orientation.
Went back to Energy Bar for now.
rEVOLVE said:
Tried it, but wierd behavior when going to landscape - ring gets stuck showing in the wrong place on the screen - no longer around the camera, but where it thinks the whole should be even though it's a different orientation.
Went back to Energy Bar for now.
Click to expand...
Click to collapse
Are you on the latest version as on Play Store? That issue was fixed in the latest version. If you can reproduce the issue with specific steps, let me know I can look into it.
Just installed, works perfectly. Thank you!!
rEVOLVE said:
Tried it, but wierd behavior when going to landscape - ring gets stuck showing in the wrong place on the screen - no longer around the camera, but where it thinks the whole should be even though it's a different orientation.
Went back to Energy Bar for now.
Click to expand...
Click to collapse
I have just installed it and I did not encounter that issue. I had Google Play Store open, moved the phone to landscape and back and the ring moved with the whole app but bounced back to the camera punchhole.
My question is, what about the display burning in? I know that it only works when the screen is on but this question might fall from other and this is why I have asked.
Warrior1975 said:
Just installed, works perfectly. Thank you!!
Click to expand...
Click to collapse
Great to know it! Enjoy the App!
Have you ever consider the option of making way for it turn off when your screen is on & turn back on when your screen is back off?
Lock-N-Load said:
Have you ever consider the option of making way for it turn off when your screen is on & turn back on when your screen is back off?
Click to expand...
Click to collapse
Since, the phone's screen is likely to be off the majority of time, would like to avoid any potential unforeseeable issue with screen burn-ins. So yes, wouldn't like to add such a feature for now.
buddy66 said:
I have just installed it and I did not encounter that issue. I had Google Play Store open, moved the phone to landscape and back and the ring moved with the whole app but bounced back to the camera punchhole.
My question is, what about the display burning in? I know that it only works when the screen is on but this question might fall from other and this is why I have asked.
Click to expand...
Click to collapse
Hi! Please refer to the notes added to the bottom of App's listing on Play Store in specific.
Another suggestion - can you make little 12 6 3 9 ticks on the Ring Origin so its easier to get the 12 position. It's minor but might be a nice touch to have these ticks for reference.
Is it possible it only make it show up when charging and not all the time?? Thank you.
Lock-N-Load said:
Another suggestion - can you make little 12 6 3 9 ticks on the Ring Origin so its easier to get the 12 position. It's minor but might be a nice touch to have these ticks for reference.
Click to expand...
Click to collapse
So much this...I really like the app, but it always feels like its not quite centered/even when using bidirectional discharge
Can I buy the pro version？
I can't buy pro version,because this app don't support google play payment.
How can i make white and pulsing ive seen on others.
Great app by the way.
You need a notification light / LED for your Galaxy S22 Plus? With aodNotify you can easily add a notification light / LED directly to Samsung's Always On Display!
You can select different notification light styles and show the notification light around the camera cutout, screen edges or even simulate an notification LED dot in the statusbar of your Galaxy S22 Plus! As the notification light is integrated in Samsung's Always On Display it has minimal battery consumption and doesn't drain your battery like other apps which keep your phone awake!
If you don't need the Always On Display, the app can also activate the Always On Display (AOD) only on notifications or show the notification light / LED even without the Always On Display!
With the notification preview feature you can directly see if you have important notifications without waking your Galaxy S22 Plus!
MAIN FEATURES:
• Notification light / LED for Galaxy S22 Plus, Note 20, S20...
• Low energy notification preview (android 10+)
• Activate Always On Display (AOD) only on notifications
• Charging / Low battery light / LED
MORE FEATURES:
• Notification light styles (around camera, screen, LED dot)
• Custom app / contact colors
• ECO animations to save battery
• Interval mode (on/off) to save battery
• Night times to save battery
• Minimal battery consumption
BATTERY USAGE PER HOUR ~:
• LED - 3.0%
• LED & INTERVAL - 1.5%
• LED & ECO - 1.5%
• LED & ECO & INTERVAL - 1.0%
• NOTIFICATION PREVIEW - 0.5%
• ALWAYS ON DISPLAY - 0.5%
If there is no notification the app consumes almost 0% battery
DOWNLOAD:
NOTES:
• Samsung may block this app with future updates!
• Please check if the app is compatible before updating phone software or always on display!
• Altough we never experienced any screen burn in issues on our test devices, we recommend to not keep the notification light / LED active for a long time! Use at you own responsibility!
"Samsung Galaxy" is a protected trademark of "SAMSUNG ELECTRONICS"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The app should work fine on S22. Will test asap when i get my S22!
Jawomo said:
The app should work fine on S22. Will test asap when i get my S22!
Click to expand...
Click to collapse
I use this app a lot on my OnePlus Nord and I think I'll do the same on the S22+
What do you think of some gradient coloring feature ? Like we can chose 2 colors for some animations
Jawomo said:
The app should work fine on S22. Will test asap when i get my S22!
Click to expand...
Click to collapse
Greetings, thank you for the app great work!. A couple of observations:
* The "Camera edge-Fine tuning" section needs further alignment, if u change the "Offset position of Y" to : -2 that should solve it.
* Regarding setting up the app you need to mention that the app needs " the battery optimization" option to be changed to "Unrestricted" in order for it to not be killed and stop working.
* If you restart the device, the app doesn't work properly because AOD is turned off and you will have to turn it on manually again. I hope that can be solved soon.
I use this on all my devices..never had an issue. So I am saying thanks once again
Hello @Jawomo
Which topic should I use to talk about Power button remapper for my S22+?
Edge lighting does not work on the S22 plus.