I was just trying to install MediaTek MT65xx USB VCOM Drivers on Windows 10 to Flash firmware in my Android phone,
But it is returning me Error code 10.
The drivers are not working too,
Please give me it's solution as soon as possible...
Thanks...
This error isn't returned by MT65xx USB VCOM Driver. I suppose it's returned by SP Flash Tool. Please be more precise if you want to get helped.
jwoegerbauer said:
This error isn't returned by MT65xx USB VCOM Driver. I suppose it's returned by SP Flash Tool. Please be more precise if you want to get helped.
Click to expand...
Click to collapse
I don't know who returns it,
Btw, here is the error in the image I attached,
When I try to flash firmware using Sp Flash Tool, it returns me error: STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003)
And I read from another xda problem,
That this error seemed to be occur when MediaTek MT65xx USB VCOM Drivers(MediaTek DA USB VCOM Port Drivers) are not installed correctly...
That's what I know, and no doubt you have more knowledge than that I have, So please clear my concepts if wrong and give me its solution... please...
Mr. Stranger 404 said:
I don't know who returns it,
Btw, here is the error in the image I attached,
When I try to flash firmware using Sp Flash Tool, it returns me error: STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003)
And I read from another xda problem,
That this error seemed to be occur when MediaTek MT65xx USB VCOM Drivers(MediaTek DA USB VCOM Port Drivers) are not installed correctly...
That's what I know, and no doubt you have more knowledge than that I have, So please clear my concepts if wrong and give me its solution... please...
Click to expand...
Click to collapse
First off, go to Control Panel > Device Manager while your device is connected. Right-click the device and uninstall device.
This will also uninstall any associated existing drivers from your computer.
Once this is done, reboot the computer, connect the device again and try these drivers: https://drive.google.com/file/d/1qVmxaQxddvPRjEKHjQVjj3Eo_cawSE9C/view
DJBhardwaj said:
First off, go to Control Panel > Device Manager while your device is connected. Right-click the device and uninstall device.
This will also uninstall any associated existing drivers from your computer.
Once this is done, reboot the computer, connect the device again and try these drivers: https://drive.google.com/file/d/1qVmxaQxddvPRjEKHjQVjj3Eo_cawSE9C/view
Click to expand...
Click to collapse
I tried installing the drivers you provided, changed the version of sp flash tool, but nothing worked, same error occurred every time...
Mr. Stranger 404 said:
I tried installing the drivers you provided, changed the version of sp flash tool, but nothing worked, same error occurred every time...
Click to expand...
Click to collapse
What's your full device brand/model? What's Windows OS version?
Mr. Stranger 404 said:
When I try to flash firmware using Sp Flash Tool, it returns me error: STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003)
Click to expand...
Click to collapse
Means SP Flash Tool is unable to read from and/or write to device
Mr. Stranger 404 said:
I tried installing the drivers you provided, changed the version of sp flash tool, but nothing worked, same error occurred every time...
Click to expand...
Click to collapse
Try changing the cable or the port. Preferably USB 2.0. And as @jwoegerbauer asked, please provide more details about the device itself and the Windows version being used.
jwoegerbauer said:
Means SP Flash Tool is unable to read from and/or write to device
Click to expand...
Click to collapse
Yeah...
jwoegerbauer said:
What's your full device brand/model? What's Windows OS version?
Click to expand...
Click to collapse
I use tecno spark 4 kc2,
Trying to flash on Windows 10...
Related
Hey Guys
I bricked my P780 and didnt do a backup. I formated the phone with SpFlashTool, afterwards the Flashing didnt work. And a second format didnt work too.
Now i tried nearly every possible tutorial on the web...
I am using win7
My main problem is that i am using SpFlashTool (newest version) and i get an 4032 Error if i try to download the rom.
I tried nearly every Rom for the p780 with every possible scatter file.
I tried nearly every MediaTek DA VCOM USB Driver, MediaTek PreLoader VCOM USB Driver and MTK USB Port Driver and always with no success.
I even plugged out the battery (its not removable) without damaging the phone...
Spackotus said:
Hey Guys
I bricked my P780 and didnt do a backup. I formated the phone with SpFlashTool, afterwards the Flashing didnt work. And a second format didnt work too.
Now i tried nearly every possible tutorial on the web...
I am using win7
My main problem is that i am using SpFlashTool (newest version) and i get an 4032 Error if i try to download the rom.
I tried nearly every Rom for the p780 with every possible scatter file.
I tried nearly every MediaTek DA VCOM USB Driver, MediaTek PreLoader VCOM USB Driver and MTK USB Port Driver and always with no success.
I even plugged out the battery (its not removable) without damaging the phone...
Click to expand...
Click to collapse
Hi. Because you have formated your nand you must reinstall your drivers, because your preloader now is messed up.
In order to do that you must do this:
1. Install drivers.
2. Go to device manager and let the window open.
3. Connect your phone and new hardware should appear for just a seccond or 2 max, something with MTK 6.5.XXX.
4. Click very fast on the little new thing that appear there because will desapear.
5. Now press the button to update drivers hardware. In one of my posts you will find an archive with the right drivers. Drivers are on the archive uploaded here.
6. After the drivers are installed your PC should recognize the phone.
7. After this the steps should be the same to flash your ROM. Oh and by the way: Press Firmware Upgrade button not Download. And dont forget to check DA/DL With Checksum... option
8. Waiting for feedback.
9. Good Luck.
stympy said:
Hi. Because you have formated your nand you must reinstall your drivers, because your preloader now is messed up.
In order to do that you must do this:
1. Install drivers.
2. Go to device manager and let the window open.
3. Connect your phone and new hardware should appear for just a seccond or 2 max, something with MTK 6.5.XXX.
4. Click very fast on the little new thing that appear there because will desapear.
5. Now press the button to update drivers hardware. In one of my posts you will find an archive with the right drivers. Drivers are on the archive uploaded here.
6. After the drivers are installed your PC should recognize the phone.
7. After this the steps should be the same to flash your ROM. Oh and by the way: Press Firmware Upgrade button not Download. And dont forget to check DA/DL With Checksum... option
8. Waiting for feedback.
9. Good Luck.
Click to expand...
Click to collapse
First of all thanx!
But whitch driver i should install in Point 1. ?
Second, what should i do if the device is appearing for 2 sec, the device appears straight as unknown device and then replugs itself every 30 sec
Spackotus said:
First of all thanx!
But whitch driver i should install in Point 1. ?
Second, what should i do if the device is appearing for 2 sec, the device appears straight as unknown device and then replugs itself every 30 sec
Click to expand...
Click to collapse
Hi. The drivers i uploaded to you at my post!
For the new device you must have the device manager window open ! Only there you will find the preloader.
stympy said:
Hi. The drivers i uploaded to you at my post!
For the new device you must have the device manager window open ! Only there you will find the preloader.
Click to expand...
Click to collapse
Well the device appears straight as MTK USB Port, , there is no 2 sec TimeFrame when the device apears as MT65xx
an yes, i installed your driver, i am even using a new installation of win7
Hi guys.. sory to butt in... but im experiencing the same problem where in my case i have lenovo s720 instead.
Does the solution works for u?? Mine says something about partition manager eror.
beckham_totti said:
Hi guys.. sory to butt in... but im experiencing the same problem where in my case i have lenovo s720 instead.
Does the solution works for u?? Mine says something about partition manager eror.
Click to expand...
Click to collapse
The solution should work for you! Or else search on this forum itself and you will get your answer!
Hello,
I flashed a ROM with sp-tool but the phone does not open. I power it on but nothing happens, no vibration, no screen flashing nothing.
Now I try to reflash the stock ROM but:
If I connect it it to PC it is recognized as MTK USB Port instead of MediaTek Preloader USB VCOM and SPTools returns DRAM failed error.
I tried removing the battery and connecting it, pressing VOL+ etc but the same happens.
I read this guide http://forum.xda-developers.com/showthread.php?t=1943442 but I could not do something. I found in the guide a link in a Russian forum where they talked about flashing the preloader using the board's PINs, but the translate does not give me quality information on how to do this
Any ideas?
Thank you
ShadowReaperGR said:
Hello,
I flashed a ROM with sp-tool but the phone does not open. I power it on but nothing happens, no vibration, no screen flashing nothing.
Now I try to reflash the stock ROM but:
If I connect it it to PC it is recognized as MTK USB Port instead of MediaTek Preloader USB VCOM and SPTools returns DRAM failed error.
I tried removing the battery and connecting it, pressing VOL+ etc but the same happens.
I read this guide http://forum.xda-developers.com/showthread.php?t=1943442 but I could not do something. I found in the guide a link in a Russian forum where they talked about flashing the preloader using the board's PINs, but the translate does not give me quality information on how to do this
Any ideas?
Thank you
Click to expand...
Click to collapse
Hi. What you did is to brick your preloader. It seems to me that your phone is made after 03.2014.
What you have to do is:
1. reinstall the driver. Follow the tutorial from here: http://forum.xda-developers.com/lenovo-p780/help/lenovo-p780-mt6589-device-hard-bricked-t2890675
2. download the good preloader from here: http://forum.xda-developers.com/len...cked-flashing-wrong-rom-doesnt-t2749683/page4
3. replace the preloader from your downloaded ROM with the one from step 2.
4. Start SP FLASH TOOL and load scatter file
5. Check DA/DL WITH CHECKSUM
6. Flash it normaly now.
7. Good Luck
8. Waiting for feedback....
The same.
The phone is recognized as MTK USB Port and the SP-flash returns DRAM failed
ShadowReaperGR said:
The same.
The phone is recognized as MTK USB Port and the SP-flash returns DRAM failed
Click to expand...
Click to collapse
Hi. Can you tel me what was your STOCK ROM?
And what SP FLASH TOOL are you using ?
stympy said:
Hi. Can you tel me what was your STOCK ROM?
And what SP FLASH TOOL are you using ?
Click to expand...
Click to collapse
Merimobiles told me that this was the original rom
www.needrom.com/download/lenovo-p780-2
I tried varirous versions of SP Flash Tool
I think that the only option is to hard-flash it using the pins from the board
ShadowReaperGR said:
Merimobiles told me that this was the original rom
www.needrom.com/download/lenovo-p780-2
I tried varirous versions of SP Flash Tool
I think that the only option is to hard-flash it using the pins from the board
Click to expand...
Click to collapse
Try this: READ THIS TWICE TILL YOU UNDERSTAND :
1. Download SP FLASH 5
2. Download you ROM from here(not optional): http://forum.xda-developers.com/lenovo-p780/development/p780-row-s226-flash-flashtool-t2909202
3. Open Flash Tool 5 load scatter file from the ROM you downloaded.
4. Select only the preloader.
5. Under the big Download button select firmware upgrade
6. Now press BIG DOWNLOAD BUTTON.
7. The preeloader should flash.
8. Now after flashing the preloader you must check all others except preloader.
9. Under the big Download button select just download only.
10. Press BIG DOWNLOAD BUTTON.
11. Now your ROM should start downloading in your phone.
12. After downloading is completed your ROM should start .
13. Good Luck
14 Waiting for feedback.
wanna use ur method
Hi, I will try your method on my brick lenovo p780 4g. Wish me luck. Thanks.
:fingers-crossed::fingers-crossed::fingers-crossed:
alongbalbol said:
Hi, I will try your method on my brick lenovo p780 4g. Wish me luck. Thanks.
:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
I wished on your original post !
I have a bricked Bluboo x550, phone refuses to power on, i tried flashing stock rom but i keep getting Enable DRAM Failed. My phone uses a non removable battery, i have installed Preloaded USB Vcom driver but flashtool seems not to recognise it, instead it uses the phone default driver which install whenever i plug the phone when switched off i.e MediaTek USB Port.
Change "Download only" option to "Firmware Upgrade" this will fix your problem.
asderdd said:
Change "Download only" option to "Firmware Upgrade" this will fix your problem.
Click to expand...
Click to collapse
failed to get PMT info
1. Unistall All Mtk Drivers.
2.Disable driver signature verification of windows.
3.Install MTK Preloader driver and try again.
If those won't work you can try old versions of sp flash tool.
asderdd said:
1. Unistall All Mtk Drivers.
2.Disable driver signature verification of windows.
3.Install MTK Preloader driver and try again.
If those won't work you can try old versions of sp flash tool.
Click to expand...
Click to collapse
no luck:crying:
First attachment: used a lower version of sp flashtool
2nd attachment: Changed the preloader.bin to that of another similar rom
3rd attachment: Firmware upgrade mode using changed preloader.bin
4th attachment: used another lower version of sp flash tool
Note: I was able to format with out any problem atleast that's what caused this mess in the first place but i cant back the rom
Hey guys.
I've tried to downgrade the flyme os version on my m3s with FlashFire and the procces got stuck in the middle.
The phone turned off and there is no sign of life coming from it.
There is no recovery mode, and no sound when connecting device via usb.
Now i'm trying to flash a new rom with Flash tool.
I've downloaded MediaTek drivers, and the phone get recognized only when pressing VOL- button and connecting usb.
After that proccedure the device is detected as "MediaTek USB Port", altough the tutorial saying it should be detected as "USB VCOM PORT".
img: i68.tinypic.com/2eyj9fo.pn
(Sorry for not embedding the pictures in the post, i'm still a newbie here so xda won't allow that for me.)
Flash tool is trying to download the rom's but i keep getting this error: "STATUS_BROM_CMD_FAIL"
img: i67.tinypic.com/2f08zgn.png
Googling that error already a half day. Tried all suggested solutions execpt removing the battery.
What do you about that guys?
Is there any chance of survival for me g2s?
s6n said:
Hey guys.
I've tried to downgrade the flyme os version on my m3s with FlashFire and the procces got stuck in the middle.
The phone turned off and there is no sign of life coming from it.
There is no recovery mode, and no sound when connecting device via usb.
Now i'm trying to flash a new rom with Flash tool.
I've downloaded MediaTek drivers, and the phone get recognized only when pressing VOL- button and connecting usb.
After that proccedure the device is detected as "MediaTek USB Port", altough the tutorial saying it should be detected as "USB VCOM PORT".
img: i68.tinypic.com/2eyj9fo.pn
(Sorry for not embedding the pictures in the post, i'm still a newbie here so xda won't allow that for me.)
Flash tool is trying to download the rom's but i keep getting this error: "STATUS_BROM_CMD_FAIL"
img: i67.tinypic.com/2f08zgn.png
Googling that error already a half day. Tried all suggested solutions execpt removing the battery.
What do you about that guys?
Is there any chance of survival for me g2s?
Click to expand...
Click to collapse
Your PC did not recognized your device because of improper driver installation try after flashing proper driver:-
-Here is the link of drivers of m3s install your required driver from this site:-
http://gsmusbdriver.com/meizu-m3s
Before installing this driver "disable driver signature verification" in your pc and then install this driver....ok...
Sent from my SM-A710F using Tapatalk
AshTechsoft said:
Your PC did not recognized your device because of improper driver installation try after flashing proper driver:-
-Here is the link of drivers of m3s install your required driver from this site:-
Before installing this driver "disable driver signature verification" in your pc and then install this driver....ok...
Sent from my SM-A710F using Tapatalk
Click to expand...
Click to collapse
I already did that, couple of times.
The device being detected only when pressing VOL- button and simultaneously connetcting USB.
All tutorials says that it should be detected without pressing any button - just connecting the phone with USB.
I Think that what cause the ERROR in flash tool.
Help me guys.. My RN4 mtk 3/64 MIUI Global 8.0.3.0 unlockbootloader suddently dead.. No led, no vibrate. My pc detect as mtk usb port..but connection not stable
.. Connect-disconnect repeatly. And SPFT can't work.. Can't format, can't readback, can't flash.. Always stuck at 100% red bar and ERROR : STATUS_DA_HASH_MISMATCH for rom miui 8 china or global stable.. And ERROR : STATUS_EXCEED_NUM_MAX for rom global dev and china dev..please give me solution :crying::crying:
Thanks..
Can you get into the bootloader to use fastboot? Does that much work? If not, you may be in trouble
Also, are you positive you have the MTK driver installed correctly? I remember there being driver verification issues with Win10.
smokinjoe2122 said:
Can you get into the bootloader to use fastboot? Does that much work? If not, you may be in trouble
Also, are you positive you have the MTK driver installed correctly? I remember there being driver verification issues with Win10.
Click to expand...
Click to collapse
Can not enter fastboot or recovery mode .. I am using win 7 64bit .. And for the mtk driver I've tried to install repeatedly from various sources and in various ways but the result is the same.
arilevint said:
Help me guys.. My RN4 mtk 3/64 MIUI Global 8.0.3.0 unlockbootloader suddently dead.. No led, no vibrate. My pc detect as mtk usb port..but connection not stable
.. Connect-disconnect repeatly. And SPFT can't work.. Can't format, can't readback, can't flash.. Always stuck at 100% red bar and ERROR : STATUS_DA_HASH_MISMATCH for rom miui 8 china or global stable.. And ERROR : STATUS_EXCEED_NUM_MAX for rom global dev and china dev..please give me solution :crying::crying:
Thanks..
Click to expand...
Click to collapse
If your repeatedly getting disconnect/reconnect I would suggest you use another USB cable or USB port because that's not normal.
If not then it may be a driver/PC issue.
Sent from my Redmi Note 4 using Tapatalk
Wilderone said:
If your repeatedly getting disconnect/reconnect I would suggest you use another USB cable or USB port because that's not normal.
If not then it may be a driver issue.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
Ok..I'm going to buy a new cable.
Still unresolved. I try memory test SPFT can run normally. Device manager detects as MediaTek DA vcom usb .. But if I format or flashing error message appears again .. STATUS_DA_HASH_MISMATCH.
Perhaps try downloading different firmware if you're getting a hash error?
I still think getting into fastboot is important...Since Official MIUI doesn't have a real recovery, you're better off installing TWRP and seeing if you can do something from within recovery.
arilevint said:
Still unresolved. I try memory test SPFT can run normally. Device manager detects as MediaTek DA vcom usb .. But if I format or flashing error message appears again .. STATUS_DA_HASH_MISMATCH.
Click to expand...
Click to collapse
Is your Rn4 a mtk device or snapdragon device???? Please check.
If it is mtk then u would require scatter file along with correct firmware.
And if it is a snapdragon device, u can flash most of the things through bootloader mode.
Hope it helps.
subodhverma21 said:
Is your Rn4 a mtk device or snapdragon device???? Please check.
If it is mtk then u would require scatter file along with correct firmware.
And if it is a snapdragon device, u can flash most of the things through bootloader mode.
Hope it helps.
Click to expand...
Click to collapse
Im sure my device xiaomi redmi note 4 mediatek 3/64gb with logo china mobile in back casing.
arilevint said:
Im sure my device xiaomi redmi note 4 mediatek 3/64gb with logo china mobile in back casing.
Click to expand...
Click to collapse
Working with MTK devices is bit tricky.
though you will get success, i Hope
If you are sure that your device is MTK, then ofcourse your bootloader mode will not work. So try to adopt this solution:
1. Get SPFlash Tool, the latest one. http://spflashtool.com/
2. Get MediaTek USB VCOM drivers. http://spflashtool.com/
3. Now most important Get your Original Firmware along with the Scatter file. The SPflashtool only recognizes the scatter file. So you need ROM along with scatter file.
check this link and follow the instructions http://en.miui.com/thread-370620-1-1.html
check your ROM if it is here. Only Use the correct firmware for your devices otherwise you may do a permanent damage to your device. http://en.miui.com/download-309.html#454
Hope it helps.
Hi i have the same problem, spft always give me an error, i cannot enter in fastboot or recovery, did you solve the problem?
have you flashed preloader or had you selected "Format all and Download"? If not, or maybe yes,, try to flash custom cust.img and just plug in your phone without holding vol-down button. Also make sure that you disable driver signature enforcement. Anyway it sounds scary as I reflash my fastboot firmware on SP Flash Tool ocasionally after using twrp.
---------- Post added at 06:14 PM ---------- Previous post was at 06:12 PM ----------
If it doesn't work,, have a motherboard replacement
hello i managed to flash with sp flash tool but after flashing it is not charging and couldnt be powered on. i have held the power button for more than 20 secs
jr1945 said:
hello i managed to flash with sp flash tool but after flashing it is not charging and couldnt be powered on. i have held the power button for more than 20 secs
Click to expand...
Click to collapse
go to help at care centre buddy it look like a serious problem
subodhverma21 said:
Working with MTK devices is bit tricky.
though you will get success, i Hope
If you are sure that your device is MTK, then ofcourse your bootloader mode will not work. So try to adopt this solution:
1. Get SPFlash Tool, the latest one.
2. Get MediaTek USB VCOM drivers.
3. Now most important Get your Original Firmware along with the Scatter file. The SPflashtool only recognizes the scatter file. So you need ROM along with scatter file.
check this link and follow the instructions
check your ROM if it is here. Only Use the correct firmware for your devices otherwise you may do a permanent damage to your device.
Hope it helps.
Click to expand...
Click to collapse
i stuck in (Vol -) ,( Vol - and power button )and plug in USB. red bar not appear in SP tool, why it happen? please help
chimouw said:
i stuck in (Vol -) ,( Vol - and power button )and plug in USB. red bar not appear in SP tool, why it happen? please help
Click to expand...
Click to collapse
are you able to go to VCOM mode?
you have to go to VCOM mode in the MTK device to use the SP Flash Tool.
1. Install Vcom drivers from internet.
2. Phone will get detected. Then the SP Flash Tool will Run
Hope it helps.
subodhverma21 said:
are you able to go to VCOM mode?
you have to go to VCOM mode in the MTK device to use the SP Flash Tool.
1. Install Vcom drivers from internet.
2. Phone will get detected. Then the SP Flash Tool will Run
Hope it helps.
Click to expand...
Click to collapse
I finally installed mediatek driver but it didn't give any progress, btw test point can work??
chimouw said:
I finally installed mediatek driver but it didn't give any progress, btw test point can work??
Click to expand...
Click to collapse
Do you have the scatter file?
where did you get the scatter file?
Which SPF tool are you working with?
Download the latest SPFT and then try.
hope it helps.
subodhverma21 said:
Do you have the scatter file?
where did you get the scatter file?
Which SPF tool are you working with?
Download the latest SPFT and then try.
hope it helps.
Click to expand...
Click to collapse
I has scatter file from en. Miui /a-234 with codename nikel, I used spf tool the latest version.
Otherwise, my phone can not detected in my pc, neither unknown device or Vcom statuse. How should I do again? With test point or DFC can work??
Really my phone is Deep Death, before DD I flashed with snap dragon rom, result is DD
chimouw said:
I has scatter file from en. Miui /a-234 with codename nikel, I used spf tool the latest version.
Otherwise, my phone can not detected in my pc, neither unknown device or Vcom statuse. How should I do again? With test point or DFC can work??
Really my phone is Deep Death, before DD I flashed with snap dragon rom, result is DD
Click to expand...
Click to collapse
Have patience, it should not be problem.
Is your battery removable?
If yes, take it out. Unplug usb.
Plug usb again with battery out. Press -vol to detect vcom driver.
Most important , adb driver or usb debugging mode should not be enabled. Otheewise the vcom drivers will not install.
Once vcom mode works. SPFT will work on its own.
Hope it helps.