Related
White Beam Kernel for Galaxy Player 4.0 YP-GB1(KOR) and YP-G1(INTL)
Hello there, I'm glad to Release latest version of my kernel
it can be have less features then other kernel in this SGP 4.0 and 5.0 forum
if you have any problems while you using this kernel OR want to send me feedback,
send them via email, fascbook, google+, twitter, my blog and etc.
Latest Version of this Kernel : #23 (2012/08/01)
This kernel woks on Galaxy Player 4.0 YP-GB1(KOR) and YP-G1 (INTL), May not or never works on other version of Galaxy Player
If you are using other version of Galaxy Player DO NOT flash this kernel.(except when you are brave)
Features
Based on YP-GB1 2.6.35.7 Gingerbread kernel source
-LiveOC (You can set OverClock value in percent(%) → to set overclock value in percent, install NSTools from play store
-Voodoo Sound driver v10
-init.d support
-Scheduler : CFQ, Deadline, Noop, SIO(default), VR, BFQ(v1r1)
-Read ahead tweak
-Max touch point limit : 10points
-Custom bootlogo
-CWM Recovery (Added from SteveS' kernel source)
-Standard bootanimation support
-CPU Governors : conservative, userspace, powersave, ondemand, performance, SmartassV2(default), lulzactive
-Tiny RCU
-jhash3
-Kernel compression : LZMA
Changlogs
20120801(#23):
Updated jhash2 to jhash3
Enabled Tiny RCU
Using LZMA compression
20120731(#21):
Added lulzactive CPU governor, set smartassV2 as default
*My Kernel(WhiteBeam Kernel) was verified that works on YP G1(INTL)
thanks to S_m_O_k for test it on YP-G1 INTL
20120730(#20):
Added BFQ i/o scheduler (v1r1)
20120729(#19):
from this version, this kernel is compiled with KRKPG initramfs
20120727(#16):
Added SmartassV2 CPU Governor
20120726:
Added Standard bootanimation support
20120725:
Fixed T-DMB problem
20120724:
Added CWM recovery from SteveS' kernel source
20120723:
First release on here
How to install(with Odin3)
-Download Kernel from dowmload URL.
-turn off your device first, then get it in Download mode.
-Open Odin3
-Select the Kernel file in 'PDA' section
※DO NOT touch any option in Odin (Make sure Re-Partition, Flash lock, Phone EFS clear, and Phone bootloader aren't checked)
-Click 'Start' to flash kernel
How to uninstall(with Odin3)
-Download stock KRKPC kernel from here
(OR Download stock KRKPG kernel from here if your using KRKPG firmware)
-turn off your device first, then get it in Download mode.
-Open Odin3
-Select the Kernel file in 'PDA' section
※DO NOT touch any option in Odin (Make sure Re-Partition, Flash lock, Phone EFS clear, and Phone bootloader aren't checked)
-Click 'Start' to flash kernel
Download:
WBK_YP-GB1_YP-G1-INTL_GB_20120801(Latest Version)
WBK_YP-GB1_GB_20120731
WBK_YP-GB1_GB_20120730
WBK_YP-GB1_GB_20120729B
WBK_YP-GB1_GB_20120727
WBK_YP-GB1_GB_20120726
WBK_YP-GB1_GB_20120725
WBK_YP-GB1_GB_20120724
WBK_YP-GB1_GB_20120723
Source codes
Kernel | initramfs(KRKPC) | initramfs(KRKPG)
CREDITS
SteveS, Superqurio, Ezekeel, morfic
Do it at your own risk, i have no responsible if your device damaged after flash kernel
It looks nice but don't make a thread on each new version.
zaclimon said:
It looks nice but don't make a thread on each new version.
Click to expand...
Click to collapse
^^ this.
Sent from my One S
zaclimon said:
It looks nice but don't make a thread on each new version.
Click to expand...
Click to collapse
sorry, i will be careful next time when i submit new thread
썩소님
쓰레드 매번 새로 올리시지 마시고 에딧/딜릿 눌러서 수정하시면 되겠슴당 고객님.ㅎㅎ
xda에 용감한 한국어 등장!
neodymium said:
쓰레드 매번 새로 올리시지 마시고 에딧/딜릿 눌러서 수정하시면 되겠슴당 고객님.ㅎㅎ
xda에 용감한 한국어 등장!
Click to expand...
Click to collapse
이미 아까 #23 릴리즈부터 그렇게 하고 있지요 허허허허
그리고 이미 zaclimon 님께서 새 버전 올릴때 쓰레드 새로 만들지 말라고 예기 해주셨어요 허허허허
근대 갑자기 한글이라니 ㅋㅋㅋ
BR Kernel Based on Lineageos kernel
Features
Linux 3.4.113
Built with UBERTC 7.2.1
Governors: bioshock, elementalX, intellim, interactive, ondemand, perfomance, powersave, smartmax, userspace
I/O Schedulers: bfq, cfq, deadline, fiops, maple, noop, zen
CPU hotplugs: IntelliPlug, AutoSMP
Custom voltage control
F2FS support
TCP Congestion Control
USB fastcharge
MultiROM Support
and more...
Installation Instructions
Download the zip file and save it into the root directory of internal/external storage
Reboot into recovery
Make backup boot partition
Flash the zip and reboot
Default settings
CPU frequency: 384MHz to 1.566GHz
CPU governor: elementalx
Hotplug: AutoSMP
Input CPU Boost: disabled
I/O Scheduler: zen
Fastcharge: enabled
Downloads
AndroidFileHost
XDA:DevDB Information
BR Kernel, Kernel for the LG G Pad 8.3
Contributors
beroid
Source Code: https://github.com/beroid/android_kernel_lge_v500/tree/nougat
Kernel Special Features:
Version Information
Status: Stable
Created 2017-06-20
Last Updated 2018-01-10
Reserved
Can be flash in Stock Rom V30?
Jansxel said:
Can be flash in Stock Rom V30?
Click to expand...
Click to collapse
no
beroid said:
no
Click to expand...
Click to collapse
No stock, as in ''for custom/AOSP only'' ? Would be great
Cheers and TIA
Great and thanks for kernel.
Im flashing it with twrp and not boot on rom(im with aosp of adrianom)it reboot only in twrp
Thanx beroid for your valuable efforts buddy!
and...Would this kernel be suitable for gaming in AOSP N, Coz TBH, AOSP and LinageOS Nougat both sucks when it comes to gaming!
The best was stock lollipop+Fishears kernel!
Flashed the kernel on latest Nougat AOSP build BUT ONLY REBOOTS IN RECOVERY!!!
In short, this kernel doesn't work with any ROM. No stock, no AOSP, no Lineage.... What is the purpose then ?
I'm on LineageOS 14.1, 20170623 nightly. kernel is working fine. device feels smoother and faster. have not tried gaming since I don't play anything on this tablet
Does it work on CRDROID?
5nickers said:
Does it work on CRDROID?
Click to expand...
Click to collapse
Yup
Sent from my Nexus 6P using Tapatalk
Update - v1.02
added IOSched switcher
patches for several CVEs
fixed installation for LOS-based ROMs
just flashed on latest lineageos and suddenly my v500 is rebooting its ass off.
with this kernel, my tab needs a few minutes to somehow stabilize. like when I boot it up and use it immediately, it reboots. it has overheating issues which makes it reboot while gaming, ex. vainglory on low settings. this got worse in 1.02. I even have mako hotplug enabled and cpu temp limit enabled
Doesn't work on AOSP, only reboots in recovery....
Thanks man !!
Awesome work upstreaming the kernel and adding all those excellent features ... Worked flawlessly here on mokee N ... Would be great if you add zzmoove as governor ! Thanks man !
Update - v1.03
Updated toolchain
Patches for several CVEs
n3loki said:
I'm on LineageOS 14.1, 20170623 nightly. kernel is working fine. device feels smoother and faster. have not tried gaming since I don't play anything on this tablet
Click to expand...
Click to collapse
Weird... LineageOS is based on AOSP, so it should work
Very useful kernel... thanks dev
SyncedPlus Kernel
Features:
Cpu overclock and underclock (min: 268Mhz, max: 2.7Ghz)
Different frequency table
Voltage table (undervolted by default)
New cpu governors: electroactive, syncedplus(default)
New hotplugs: cpuquiet, alucard(default with modified parameters)
Mpdecision hotplug is disabled
Gpu overclock and underclock (min: 27Mhz, max: 657Mhz)
New gpu governors: ondemand, conservative (default)
Simple GPU Algorithm
Adreno Idler
I/O Schedulers: tripndroid, fiops, vr, sio, zen(default)...
Powersuspend
Tcp Congestion Algorithms (westwood is default)
Zram disabled by default since this device has plenty of ram
Other fixes and tweaks
Instructions:
Option
Code:
fastboot flash boot z3c.img
Option
This is the easy way.
Flash it with twrp, there is option to flash .img files. Flash it in boot partition.
Downloads:
Download kernel
For rooting method I suggest using Magisk, and for kernel editor Kernel Adiutor(can see cpuquiet, don't know for other tools).
Note: For everyone who has reboot problems, adjust voltage by +10mV or more.
This is not tested version, I don't own xperia z3 compact so I can't test, please give me feedback if it works, what works, and what not.
Thanks:
Myself5
faux123
arter97
ShadowElite
Donation:
If you like my projects you can donate me.
Source code:
https://github.com/mtruma/android_kernel_sony_msm8974ac
XDA:DevDB Information
Custom Kernel, Kernel for the Sony Xperia Z3 Compact
Contributors
SyncMaster
Kernel Special Features:
Version Information
Status: Testing
Created 2019-01-13
Last Updated 2019-01-13
Tested with carbon rom 2018/12/11 and it work perfectly.
Thanks, great job!:good:
breeze101792 said:
Tested with carbon rom 2018/12/11 and it work perfectly.
Thanks, great job!:good:
Click to expand...
Click to collapse
How is the battery life?
This kernel work only oreo? MM?
surikoff88 said:
This kernel work only oreo? MM?
Click to expand...
Click to collapse
It wont work on MM.
hello! please make an omni-based kernel, because omni doesn't want to work
I have flash this on the newest carbon6.1 19-2-2019 and working very good. No bugs for now.
I've tried it with LineageOS 17.1 and it doesn't boot. https://forum.xda-developers.com/t/official-lineageos-17-1-for-z3c.4160347/
What is needed to make it work?
DISCLAIMER:
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I have the full right from the owner of Cronos, to modify, customize and distribute the current kernel under different name.
Modifying and re-uploading this kernel distribution is not allowed.
INFO:
KRAKEN is a friendly oriented project for powerful users and gamers.
KRAKEN supports Project Spaget and OneUI ROMs.
Android Version Support:
Android Pie
Android Q
COMPATIBLE VENDORS [ARM64] :
ARM64 for A3x 2017 by @Astrako
ARM64 for A6x 2018 by @ShaDisNX255
ARM64 for J6x 2018 by @ShaDisNX255
ARM64 for J5x 2017 by @ananjaser1211
ARM64 for J7x 2017 by @ananjaser1211
SUPPORTED DEVICES:
A320x
A600x
J530x
J600x
G610x
J701x
J710x
J730x
FEATURES:
KERNEL:
Based on J530FXWU5CSH7 source
Upstreamed to Linux 3.18.140
Compiled with Linaro's GCC 7.5 Toolchain (2019.12)
Compiled with -pipe, -funroll-loops (GPU), -ffast-math (GPU), -O3, ARM related hardware GCC optimizations and graphite optimizations
Permessive SELinux
Fake KNOX Warranty Status (0x0)
Optimized for Performance
Fast boot (Increased cluster booting frequency)
Heterogeneous Multi-core Processing (PORT from Exynos 7904)
Mali: r29p0 driver (A600FNXXU5CTB9)
Custom Voltage Control (CPU/GPU/MIF/CAM and more)
Dynamic FSync (FSync ON/OFF)
Samsung's LPM (Treble)
ARM32/64 Ready (Treble and OneUI)
HOTPLUG:
Samsung's Hotplug (disabled)
CLOCKS:
OSCCLK frequency up to 27 MHz (FSB)
CL0 frequency up to 1.75 GHz (Small Cluster)
CL0 frequency down to 343 MHz (Small Cluster)
CL1 frequency up to 1.86 GHz (Big Cluster)
CL1 frequency down to 343 MHz (Big Cluster)
G3D frequency up to 1040 MHz (GPU)
G3D frequency down to 343 MHz (GPU)
BUS frequency up to 1937 MHz in dual-channel (RAM)
BUS frequency up to 968 MHz in single-channel (RAM)
MIF switching frequency up to 902 MHz (DEVFREQ)
CAM rebooting frequency up to 533 MHz (DEVFREQ)
TMU (Exynos Thermal Management Unit):
Increased thermal limits for CL0 (Small Cluster)
Increased thermal limits for CL1 (Big Cluster)
Increased thermal limits for G3D (GPU)
DVFS (Dynamic voltage and frequency scaling):
CPU: disabled
GPU: disabled
TCPs:
westwood (default)
bic
cubic
htcp
reno
I/O's:
bfq (default)
noop
deadline
row
cfq
maple
fifo
fiops
sio
sioplus
tripndroid
vr
zen
GOVERNORS:
interactive
interactives9 (default)
blu_active
cafactive
impulse
ondemandplus
bioshock
dancedance
electrodemand
hyper
intellidemand
smartass2
pegasusq
ondemandx
wheatley
thunderstorm
VARIOUS:
Boeffla Wakelock blocker
Powersuspend
WireGuard
Power Efficient workqueues
Ultra Kernel Samepage Merging
Butterizer
ROOT:
KRAKEN doesn't come with Magisk support, but you can manually download and install it from here: Magisk v20.3
SUPPORT:
In thread.
Telegram Group.
CREDITS:
Me, for developing without a device and for the struggle to test new things.
@ananjaser1211 for making this whole thing possible with his amazing work on HeliosPie.
@corsicanu for his great contribution to HeliosPie.
@Astrako for being the first one to test KRAKEN on his A3.
@LelMwhLwl for testing every single kernel image provided by me on his J5.
@kique119 for testing almost every single kernel image on his J7, for including me in his documentation and for the huge boost on what I am doing.
@Me2 for testing many of the provided images.
Thanks to anyone else who made this whole thing possible but it's not included, you are part of it as well!
XDA:DevDB Information
KRAKEN-Kernel for Galaxy Exynos 7870 devices, Kernel for the Samsung Galaxy A3/J5/J7/A6/J7 2017/2018
Contributors
SPARTANICUS, ananjaser1211
Source Code: KRAKEN
ROM OS Version: 9.x +
ROM Kernel: Linux 3.18.140
ROM Firmware Required: Pie Bootloader
Version Information
Status: Stable
Current Stable Version: RC15
Created 2019-08-13
Last Updated 2020-03-27
DOWNLOADS:
Stable Releases
INSTALLATION:
Download the provided KRAKEN-Kernel-VERSION-universal7870-OS-DATE.zip file, place the file in your internal storage or sdcard.
Boot into your recovery, find the "KRAKEN-Kernel...".zip package and flash it.
The package will detect your device and it will flash the right kernel for your device. After the flash was successful you can reboot your device.
Delete
Thread is updated, there's also a new KRAKEN version! Enjoy it and report problems as usual.
Nice Kernel!!!
Could you add Spectrum support in your Kernel?
Hi, I flashed the kernel in the new OneUI 2.0 Android 10 and it caused bootloop, I tried the other kernel and it didn't work too. My device is A600G with latest Android 10 build.
Edit: Sorry the problem is not the kernel I tried to flash only TWRP and got bootloop again.
HieuVi said:
Hi, I flashed the kernel in the new OneUI 2.0 Android 10 and it caused bootloop, I tried the other kernel and it didn't work too. My device is A600G with latest Android 10 build.
Edit: Sorry the problem is not the kernel I tried to flash only TWRP and got bootloop again.
Click to expand...
Click to collapse
Hey bro, I Just want to know how your game performs on android 10? I just tried it and my games got laggy. not on previous Android 9 they are butter smooth.
Curcepogi said:
Hey bro, I Just want to know how your game performs on android 10? I just tried it and my games got laggy. not on previouls Android 9 they are butter smooth.
Click to expand...
Click to collapse
Same, gaming performance is very poor.
HieuVi said:
Same, gaming performance is very poor.
Click to expand...
Click to collapse
I see. That's why u are trying different kernel. I just got back to android 9 because i can't stand the lag. Luckily they got the same Bootloader so downgrade is possible. Will not upgrade to Q unless the lag is fixed.
there is a new version, RC13 still works with Pie OneUI. Meanwhile 13.1 is only for Q OneUI
And RC14 oneui is only for android 10 right?
Zeflay said:
And RC14 oneui is only for android 10 right?
Click to expand...
Click to collapse
nope, 13.1 is Q release
Help i can't use camera,im installed rc13 kraken kernel,im on a600g/ds pie
deepsleep over sleep
Every 1 minute screen off then the phone going to freeze and must force shut down (vol down + power).
Idk this bug from kernel or just from my gsi
Edit : the problem is from kraken kernel not gsi.. Solve by installing coronos kernel v5 and my phone stable now..
I hope kraken fix it for next update
nice kernel bro!!!
still works on my galaxy A600G 2021
Hayn17 said:
nice kernel bro!!!
still works on my galaxy A600G 2021
Click to expand...
Click to collapse
Use rather Ares: https://areskernel.wtf/ares-7870/
It's more up to date.
nqnxev said:
Use rather Ares: https://areskernel.wtf/ares-7870/
It's more up to date.
Click to expand...
Click to collapse
thx dude i'll try it now
Root & TWRP from Xyn XDotnest
https://forum.xda-developers.com/ga...overy-twrp-3-4-0-0-galaxy-a20e-a202f-t4141767
Orange Fox Recovery from @Royna
https://forum.xda-developers.com/ga...ngefox-recovery-project-t4191645#post83945899
TWRP 3.4 & 3.5 from @Topser99
-product wipeingui
-vendor wipeingui
-flash dt.img
-flash dtbo.img
-mount efs ext4
-Fixed MTP connection (connect to laptop via USB)
By : @Topser99
-update kernel
By : @physwizz
Follow :
Series A: https://t.me/ultimate_Pie2
A20/A20e: https://t.me/Galaxy_A20_official
TWRP from @Topser99
Twrp-sm-a20e - Google Drive
drive.google.com
Official TWRP
TWRP Official Recovery for A20 and A20e
physwizz-a20e 1.70 GSI or OneUI
@physwizz
Zip installer from @Topser
-Most securities disabled
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-CPU overclocked and underclocked
-Big: 208 - 2184
-Little: 208 - 1690
-Extended battery life
-Works with Magisk 19.3 - 21.4
-Spectrum support enabled
-mtp enabled
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
Source Code for kernel: https://github.com/physwizz/physwizz_A20e_kernel
ROM Ultimate Q S21 portInstalling Custom ROMs
UltimateQ_S21_Port_A202f_V3.zip | by shumway66 for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
QwizzROM
[ROM] QwizzROM for a20e (a202)
Telegram
A20/A20e: https://t.me/Galaxy_A20_official
To overclock set CPU minimums to 2080 big and 1690 little
Installing Custom ROMs
@physwizz
1. Backup calls and texts using sms backup and restore .
2. Reboot into twrp.
3. Backup boot, data, system, vendor, product to sd card in case you want to go back to your current system
4. Wipe caches, data, system
5. Install Rom and your kernel
6. Format data (not just wipe) and then Install dmverity
7. Wipe caches. Don't reboot
8. Go to main menu. Select reboot. Select recovery
9. Reboot to system
10. Wait a long time (up to 10 minutes?)
Select your language
11. Restore data from smart switch or Google restore
or
Skip through setup and Restore data from twrp
12. Install Magisk if you want root
13. Install dmverity (in case step 8 didn't work)
If you need to install GApps
14. Wipe, advanced wipe
15. Select system, repair or change
16. Resize file system
17. Install GApps
To backup ROM before you go to a new system
Backup boot, data, system, product, vendor
quizboo said:
Click to expand...
Click to collapse
Thanks for that
I will now overclock and underclock
quizboo said:
Click to expand...
Click to collapse
Could you please let me know if this TWRP works?
https://mega.nz/file/stlGlaSZ#uo2tG4JYSaC7xqP8H4HYEnPXFZUafB9uETn8y4GGRLk
Works kernel
physwizz said:
Could you please let me know if this TWRP works?
Click to expand...
Click to collapse
recovery boots but touch is dead had to use a mouse to restore recovery backup
physwizz v1.51 A20e
Most securities disabled
All CPU Governors enabled
Interactive is default governor
SE linux enforcing
Works with Magisk 21
Works with stock dbto
GPU 343 - 1300
quizboo said:
recovery boots but touch is dead had to use a mouse to restore recovery backup
Click to expand...
Click to collapse
I'll let him know.
@Topser99
Thanks
quizboo said:
recovery boots but touch is dead had to use a mouse to restore recovery backup
Click to expand...
Click to collapse
Could you please try kernel 1.51
https://forum.xda-developers.com/showpost.php?p=83827245&postcount=8
physwizz said:
Could you please try kernel 1.51
Click to expand...
Click to collapse
It's working. Too bad I can't post any links for screenshots yet.
quizboo said:
It's working. Too bad I can't post any links for screenshots yet.
Click to expand...
Click to collapse
Working on v1.53
V1.0 is the current stable version
Latest version for testing
@quizboo @emmanuelo7
physwizz v1.55 A20e
-Most securities disabled
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 312 - 2184
-Little: 208 - 1690
-Works with Magisk 21
-Spectrum support enabled
physwizz v1.56 A20e
-Most securities disabled
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 312 - 2184
-Little: 208 - 1690
-Works with Magisk 21
-Spectrum support enabled
Thank you for building a custom kernel for A20e:good:
Royna said:
Thank you for building a custom kernel for A20e:good:
Click to expand...
Click to collapse
My pleasure
enjoy
8 people have downloaded from here
quizboo said:
recovery boots but touch is dead had to use a mouse to restore recovery backup
Click to expand...
Click to collapse
Try the new TWRP in post #1
Does MTP and ADB work in this TWRP recovery? Because I have compiled one too.
Royna said:
Does MTP and ADB work in this TWRP recovery? Because I have compiled one too.
Click to expand...
Click to collapse
yes
Royna said:
Does MTP and ADB work in this TWRP recovery? Because I have compiled one too.
Click to expand...
Click to collapse
Can you post it?