Related
Hello guys.
We are grateful because ASUS have included so many useful gimmicky bloatwares in the stock ROM on our device. One of them was AudioWizard. As a groovy sound lover, I didn't found myself satisfy with AudioWizard's sound modes. Because of that, I come here to guide you on how to install ViPER4Android FX properly on your device as I have tried several methods and tempting many errors during installing the driver.
DISCLAIMER: DO WITH YOUR OWN RISK
Do a full nandroid backup! I don't want to take any responsibility if something unexpected happens.
Tested & working fine on my ZE550KL.
I think it should works on any ASUS Zenfone 2 Laser devices as long as you are on stock Lollipop ROM.
Not supported on CyanogenMod 13.0 ROM (Android 6.0.1 Marshmallow).
Known issues:
-AudioWizard isn't working. (You get a payback, dude! It maybe conflict or the V4A broke down the AudioWizard. But you will enjoy a great sound effect better than AudioWizard. Don't cry.)
-FM radio isn't working. (If you think this is very important for you so don't flash.)
-Sound recorder isn't working.
What do you need on your device?
...a working custom recovery such as TWRP or CWM
...a working root access
...BusyBox installed properly
Download the required file (ViPER4Android lollipop.zip) from the link below.
https://drive.google.com/file/d/0B9vjPTwrSocDYzNlTXVrUG44Mms/view
Or download from the attached file (ViPER4Android lollipop.zip) below.
Flash it through your custom recovery.
If you want to use only ViPER4Android FX as a global audio effect, follow Normal mode. But if you want existing audio effects to work, follow Compatible mode.
Enjoy your new audio effect!
Credits & special thanks are given to:
@zhuhang the creator & developer of ViPER4Android FX
@asett3 for sharing the file with me
hi thank you i've been looking for this but i think i don't have acces to the file
Hey you all who are requested, sorry for the inconvenience. Now you can access the file freely.
update
Working perfectly in ZE500KG im sorry i wrong flash it non in twrp
FM is not working after flash.
FM and Sound Record is not working after flash
I didn't notice that FM radio isn't working when I'm still using V4A on stock Lollipop ROM. But my recording app is working well. The most thing I have noticed is AudioWizard not working. It maybe broken down by the V4A.
Sr. M Huzaifah
Bugs shown in the Stock Rom, were these:
- FM Radio does not work, no sound.
- It is not possible to record a phone conversation, because the Sound Record does not work.
Can anyone correcting these bugs?
Thank you
Anybody who are use this V4A can prove that the sound recorder isn't work?
M Huzaifah said:
Anybody who are use this V4A can prove that the sound recorder isn't work?
Click to expand...
Click to collapse
It does not work sound recorder and FM radio.
Is to make it work?
Mandrakerj said:
It does not work sound recorder and FM radio.
Is to make it work?
Click to expand...
Click to collapse
If it is really won't work and you want to make it work again, you need to flash the full firmware. Or you can revert/restore back if you have made a full nandroid backup. Don't use this V4A unless you think the issues isn't disturb your daily driver.
On MM is working if you install it normaly. Just download Viper4Android and install the driver, if is not working try to open the equalizer using your music player. If you use stock music player to open the equalizer it will open the stock one, try with musixmatch ( go to now playing and pres the 3 dots and open equalizer ). Is working with stock equalizer and Radio, Call Recordind is working
i flashed ViperAudio 4.7.1 zip using twrp, it works well without problem on both lollipop and marshmallow. i don't know if it isnt the same with viper4android but the UI is the same, so.. i got it from here http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075 i have been using this on several devices already, seems work flawlessly so far
feinz91 said:
i flashed ViperAudio 4.7.1 zip using twrp, it works well without problem on both lollipop and marshmallow. i don't know if it isnt the same with viper4android but the UI is the same, so.. i got it from here http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075 i have been using this on several devices already, seems work flawlessly so far
Click to expand...
Click to collapse
I confirm it. ViperAudio 4.7.1 working perfectly on ZE500KL with Marshmallow (including sound recorder and FM radio).
do you can make it for the marshmalow
mohamedelkholy said:
do you can make it for the marshmalow
Click to expand...
Click to collapse
Redirect here... http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Work both on LP & MM with no issues at all.
M Huzaifah said:
Redirect here... http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Work both on LP & MM with no issues at all.
Click to expand...
Click to collapse
i should to download any one
mohamedelkholy said:
i should to download any one
Click to expand...
Click to collapse
Pick one that's suits you.
Tanks
i want to flash stock audio wizard
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
MaxtremePL said:
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
Click to expand...
Click to collapse
Can you share the audio mods you used?? Thanks
---------- Post added at 10:43 PM ---------- Previous post was at 10:42 PM ----------
shakaraja said:
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
Click to expand...
Click to collapse
Thanks for the detailed guide... Will test now thanks
anees167 said:
Can you share the audio mods you used?? Thanks
Click to expand...
Click to collapse
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Did you disable boot to stock recovery and also you may have to fastboot recovery
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
I have distorted sound using the v4a. How fix it?
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
It dosent work getting distorted sound
viper4android install than sound break problem is fix?
mohamm3edadam said:
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Click to expand...
Click to collapse
You need the TWRP version meant for H2OS. You will find it in any H2OS based ROM thread.
Skick3 said:
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
Click to expand...
Click to collapse
Yes, there are options. Find gain controls and tweak them to your preference.
ras_fyah said:
I have distorted sound using the v4a. How fix it?
Click to expand...
Click to collapse
Akhil701 said:
It dosent work getting distorted sound
Click to expand...
Click to collapse
If you still are on OOS 2.2.x then V4A will not work. This fix is specifically meant for OOS 3.
If you are on OOS 3, then try reflashing OOS 3 with a clean flash. This might fix it, but only if you are on OOS 3.
mvha said:
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Click to expand...
Click to collapse
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
locxFIN said:
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
Click to expand...
Click to collapse
Search XDA Forums for V4A profiles and use a preferred profile according to your type of music.
whwhdtk5689 said:
viper4android install than sound break problem is fix?
Click to expand...
Click to collapse
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
arch_geek said:
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
Click to expand...
Click to collapse
yes. i'm oos 3.0 MM.
wow i'm install now viper4android !
thank you !
arch_geek said:
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
Click to expand...
Click to collapse
You've Got a Point. I have installed wrong version of V4A. Now working all. Thank You
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
shakaraja said:
Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Click to expand...
Click to collapse
Hm i had the same problem. Driver Status was false.
My Workaround was i clicked in Viper many Menus up an down. Lock Effect Mode disable to speaker. UI Setting to Expert and suddenly the Driver Status was True.
No cleaning data. I didn´t installed google play music.
With Viper4Anroid on OO2 Oxygen3 the sound are definitly noiser and better. (Master Gain (Limiter) / Output Gaine -20db)
Thx for the hint with these app.
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
How to root your phone. You find it in these guide
> http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
MaxtremePL said:
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
Click to expand...
Click to collapse
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
If you flashed OOS 3, it is highly likely that the build was not a pre-rooted build. To root follow this guide at this link :
http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
anees167 said:
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
Click to expand...
Click to collapse
Actually V4A can be tweaked to sound better than MaxxAudio. Try XtremeMUSIC mod by androidexpert35. It includes V4A as an addon.
Link to the above mod is here: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
&roid said:
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
Click to expand...
Click to collapse
Try XtremeMUSIC mod. Link: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
Hi, i'm using ViperOs 3.0 and I haven't received the Google Assisntant update yet. Does anyone know how to activate it?
Update: I updated to latest NOS oreo beta just in case and it still doesn't work.
try xposed module - assistant enabler
peroanjo said:
Hi, i'm using ViperOs 3.0 and I haven't received the Google Assisntant update yet. Does anyone know how to activate it?
Click to expand...
Click to collapse
use google app beta and google play services beta, then go to rom buttons maping and set google search or google now or assistance to long press home button, or use microphone from google widget.
assistance only works in english and spanish
peroanjo said:
Hi, i'm using ViperOs 3.0 and I haven't received the Google Assisntant update yet. Does anyone know how to activate it?
Click to expand...
Click to collapse
You need to update Google app and Play Services. Then download Google Assistant app from play store. It should work for you.
https://play.google.com/store/apps/details?id=com.google.android.apps.googleassistant
samrat_castle said:
You need to update Google app and Play Services. Then download Google Assistant app from play store. It should work for you.
https://play.google.com/store/apps/details?id=com.google.android.apps.googleassistant
Click to expand...
Click to collapse
I already installed latest beta versions of both apps, however i can't download the Google assistant app because It says that It is not available in my country (Spain) which isnt true because many other phones are getting updated automatically.
peroanjo said:
I already installed latest beta versions of both apps, however i can't download the Google assistant app because It says that It is not available in my country (Spain) which isnt true because many other phones are getting updated automatically.
Click to expand...
Click to collapse
Change system language to English US and download Assistant Apk from here:
https://www.apkmirror.com/apk/googl...assistant-0-1-174051423-android-apk-download/
samrat_castle said:
Change system language to English US and download Assistant Apk from here:
https://www.apkmirror.com/apk/googl...assistant-0-1-174051423-android-apk-download/
Click to expand...
Click to collapse
If it change my language to English (United States) it works, however if I change it back to Spanish it will disappear.
peroanjo said:
If it change my language to English (United States) it works, however if I change it back to Spanish it will disappear.
Click to expand...
Click to collapse
Try below:
When you change the language you use to talk with your Google Assistant, you change the language across your device.
On your phone or tablet, touch and hold the Home button or say "Ok Google."
At the top right, tap Explore & Your stuff and then More More and then Settings.
Under "Devices," select your phone or tablet.
Tap Assistant language and then Go to language preferences.
Tap Add a language, then choose a language.
Next to the language you added, touch and hold Reorder Reorder.
Drag the language to the top of the list.
samrat_castle said:
Try below:
When you change the language you use to talk with your Google Assistant, you change the language across your device.
On your phone or tablet, touch and hold the Home button or say "Ok Google."
At the top right, tap Explore & Your stuff and then More More and then Settings.
Under "Devices," select your phone or tablet.
Tap Assistant language and then Go to language preferences.
Tap Add a language, then choose a language.
Next to the language you added, touch and hold Reorder Reorder.
Drag the language to the top of the list.
Click to expand...
Click to collapse
The moment I move Spanish on top of English Google Assistant gets deactivated.
Is your problem solved else you might have flashed pico g apps just flash nano or above gapps you can have Google assistant and face unlock too
HeroVarun1 said:
Is your problem solved else you might have flashed pico g apps just flash nano or above gapps you can have Google assistant and face unlock too
Click to expand...
Click to collapse
I couldn't solve it. Also, the gapps package I had flashed was nano.
peroanjo said:
I couldn't solve it. Also, the gapps package I had flashed was nano.
Click to expand...
Click to collapse
Im using nano gapps package and I have face unlock and Google assistant working fine
HeroVarun1 said:
Im using nano gapps package and I have face unlock and Google assistant working fine
Click to expand...
Click to collapse
Which Rom are you using?
peroanjo said:
Which Rom are you using?
Click to expand...
Click to collapse
Nitrogen Os 8.
HeroVarun1 said:
Nitrogen Os 8.
Click to expand...
Click to collapse
Face unlock works great, Google Assistant doesn't.
peroanjo said:
Face unlock works great, Google Assistant doesn't.
Click to expand...
Click to collapse
Which Rom are you using
HeroVarun1 said:
Which Rom are you using
Click to expand...
Click to collapse
Nitrogen Os 8.1 Beta
It should work bro I just used it in nitrogen Os 8.1 build
It works flawlessly
Hi guys,
I am currently running Resurrection Remix 7.1.2,
And the problem that i am facing is that i am not able to
Use google assistant ...the setting in google app about
"Ok google" detection i greyed out.
Please someone help ??. Everything is up to date and
I even tried beta version but still no progress.?
I think Resurrection remix roms have not activated google assistant.
Bro i guess you have flashed pico Version of gapps just download any other package of gapps and flash that package you don't need to do anything else just flash that package and your google assistant will work
Master ST said:
Hi guys,
I am currently running Resurrection Remix 7.1.2,
And the problem that i am facing is that i am not able to
Use google assistant ...the setting in google app about
"Ok google" detection i greyed out.
Please someone help ??. Everything is up to date and
I even tried beta version but still no progress.?
Click to expand...
Click to collapse
Install Google app as system app if you have installed it as user app.
Sent from my mido using XDA Labs
Master ST said:
Hi guys,
I am currently running Resurrection Remix 7.1.2,
And the problem that i am facing is that i am not able to
Use google assistant ...the setting in google app about
"Ok google" detection i greyed out.
Please someone help ??. Everything is up to date and
I even tried beta version but still no progress.?
Click to expand...
Click to collapse
Go to settings > customisation > button remapping.
There swipe to hardware button remapping.
Remap home button long press to Google Now.
Launch it for the first time and then check the option.
Prince19971234 said:
Bro i guess you have flashed pico Version of gapps just download any other package of gapps and flash that package you don't need to do anything else just flash that package and your google assistant will work
Click to expand...
Click to collapse
Actually you r correct I have flashed pico version .... Which one shall I flash??
And do I need to erase anything?? Or just flash gapps?
BTW Thnx for replying
MyNameIsRage said:
Go to settings > customisation > button remapping.
There swipe to hardware button remapping.
Remap home button long press to Google Now.
Launch it for the first time and then check the option.
Click to expand...
Click to collapse
Already did that? but no use
Master ST said:
Actually you r correct I have flashed pico version .... Which one shall I flash??
And do I need to erase anything?? Or just flash gapps?
BTW Thnx for replying
Click to expand...
Click to collapse
Bro you just need to flash a gapps package choose any gapp package except that pico
Is Nano OK??
i use Nano and Assistant are working fine
Prince19971234 said:
Bro you just need to flash a gapps package choose any gapp package except that pico
Click to expand...
Click to collapse
It worked ????thanks a lot brother!!!
bad_request said:
Install Google app as system app if you have installed it as user app.
Sent from my mido using XDA Labs
Click to expand...
Click to collapse
I have solved by flashing other gapp and Even your method will work??? thnx for replying.
Master ST said:
It worked ????thanks a lot brother!!!
Click to expand...
Click to collapse
You are welcome ?
Installed Viper4android watching this video on Android 13—
But there still wasn't any difference in audio with v4a enabled...
Asked @ExactXmpl Moto X4 Pixel Experience rom developer for help and these things worked on Payton...
Paste-
post-fs-data.sh (attached)
in-
/data/adb/modules/Viper4AndroidFX
Using Root Explorer from the Play Store (attached) *grant su
And restart... Toggle legacy mode and compatibility mode until you hear the difference... You'll know
spiral777 said:
Installed Viper4android watching this video on Android 13—
But there still wasn't any difference in audio with v4a enabled...
Asked @ExactXmpl Moto X4 Pixel Experience rom developer for help and these things worked on Payton...
Paste-
post-fs-data.sh (attached)
in-
/data/adb/modules/Viper4AndroidFX
Using Root Explorer from the Play Store (attached) *grant su
And restart... Toggle legacy mode and compatibility mode until you hear the difference... You'll know
Click to expand...
Click to collapse
@ExactExampl can this be included in the plus version somehow?
Will it build like that?
nstark13 said:
@ExactExampl can this be included in the plus version somehow?
Will it build like that?
Click to expand...
Click to collapse
Unfortunately no, it's a bad idea to include any third party software anyways. By the way this method won't work with Magisk 26.x
ExactExampl said:
Unfortunately no, it's a bad idea to include any third party software anyways. By the way this method won't work with Magisk 26.x
Click to expand...
Click to collapse
Alright, it seems there's no equalizer for me now.