Related
Hello guys.
We are grateful because ASUS have included so many useful gimmicky bloatwares in the stock ROM on our device. One of them was AudioWizard. As a groovy sound lover, I didn't found myself satisfy with AudioWizard's sound modes. Because of that, I come here to guide you on how to install ViPER4Android FX properly on your device as I have tried several methods and tempting many errors during installing the driver.
DISCLAIMER: DO WITH YOUR OWN RISK
Do a full nandroid backup! I don't want to take any responsibility if something unexpected happens.
Tested & working fine on my ZE550KL.
I think it should works on any ASUS Zenfone 2 Laser devices as long as you are on stock Lollipop ROM.
Not supported on CyanogenMod 13.0 ROM (Android 6.0.1 Marshmallow).
Known issues:
-AudioWizard isn't working. (You get a payback, dude! It maybe conflict or the V4A broke down the AudioWizard. But you will enjoy a great sound effect better than AudioWizard. Don't cry.)
-FM radio isn't working. (If you think this is very important for you so don't flash.)
-Sound recorder isn't working.
What do you need on your device?
...a working custom recovery such as TWRP or CWM
...a working root access
...BusyBox installed properly
Download the required file (ViPER4Android lollipop.zip) from the link below.
https://drive.google.com/file/d/0B9vjPTwrSocDYzNlTXVrUG44Mms/view
Or download from the attached file (ViPER4Android lollipop.zip) below.
Flash it through your custom recovery.
If you want to use only ViPER4Android FX as a global audio effect, follow Normal mode. But if you want existing audio effects to work, follow Compatible mode.
Enjoy your new audio effect!
Credits & special thanks are given to:
@zhuhang the creator & developer of ViPER4Android FX
@asett3 for sharing the file with me
hi thank you i've been looking for this but i think i don't have acces to the file
Hey you all who are requested, sorry for the inconvenience. Now you can access the file freely.
update
Working perfectly in ZE500KG im sorry i wrong flash it non in twrp
FM is not working after flash.
FM and Sound Record is not working after flash
I didn't notice that FM radio isn't working when I'm still using V4A on stock Lollipop ROM. But my recording app is working well. The most thing I have noticed is AudioWizard not working. It maybe broken down by the V4A.
Sr. M Huzaifah
Bugs shown in the Stock Rom, were these:
- FM Radio does not work, no sound.
- It is not possible to record a phone conversation, because the Sound Record does not work.
Can anyone correcting these bugs?
Thank you
Anybody who are use this V4A can prove that the sound recorder isn't work?
M Huzaifah said:
Anybody who are use this V4A can prove that the sound recorder isn't work?
Click to expand...
Click to collapse
It does not work sound recorder and FM radio.
Is to make it work?
Mandrakerj said:
It does not work sound recorder and FM radio.
Is to make it work?
Click to expand...
Click to collapse
If it is really won't work and you want to make it work again, you need to flash the full firmware. Or you can revert/restore back if you have made a full nandroid backup. Don't use this V4A unless you think the issues isn't disturb your daily driver.
On MM is working if you install it normaly. Just download Viper4Android and install the driver, if is not working try to open the equalizer using your music player. If you use stock music player to open the equalizer it will open the stock one, try with musixmatch ( go to now playing and pres the 3 dots and open equalizer ). Is working with stock equalizer and Radio, Call Recordind is working
i flashed ViperAudio 4.7.1 zip using twrp, it works well without problem on both lollipop and marshmallow. i don't know if it isnt the same with viper4android but the UI is the same, so.. i got it from here http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075 i have been using this on several devices already, seems work flawlessly so far
feinz91 said:
i flashed ViperAudio 4.7.1 zip using twrp, it works well without problem on both lollipop and marshmallow. i don't know if it isnt the same with viper4android but the UI is the same, so.. i got it from here http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075 i have been using this on several devices already, seems work flawlessly so far
Click to expand...
Click to collapse
I confirm it. ViperAudio 4.7.1 working perfectly on ZE500KL with Marshmallow (including sound recorder and FM radio).
do you can make it for the marshmalow
mohamedelkholy said:
do you can make it for the marshmalow
Click to expand...
Click to collapse
Redirect here... http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Work both on LP & MM with no issues at all.
M Huzaifah said:
Redirect here... http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Work both on LP & MM with no issues at all.
Click to expand...
Click to collapse
i should to download any one
mohamedelkholy said:
i should to download any one
Click to expand...
Click to collapse
Pick one that's suits you.
Tanks
i want to flash stock audio wizard
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
MaxtremePL said:
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
Click to expand...
Click to collapse
Can you share the audio mods you used?? Thanks
---------- Post added at 10:43 PM ---------- Previous post was at 10:42 PM ----------
shakaraja said:
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
Click to expand...
Click to collapse
Thanks for the detailed guide... Will test now thanks
anees167 said:
Can you share the audio mods you used?? Thanks
Click to expand...
Click to collapse
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Did you disable boot to stock recovery and also you may have to fastboot recovery
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
I have distorted sound using the v4a. How fix it?
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
It dosent work getting distorted sound
viper4android install than sound break problem is fix?
mohamm3edadam said:
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Click to expand...
Click to collapse
You need the TWRP version meant for H2OS. You will find it in any H2OS based ROM thread.
Skick3 said:
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
Click to expand...
Click to collapse
Yes, there are options. Find gain controls and tweak them to your preference.
ras_fyah said:
I have distorted sound using the v4a. How fix it?
Click to expand...
Click to collapse
Akhil701 said:
It dosent work getting distorted sound
Click to expand...
Click to collapse
If you still are on OOS 2.2.x then V4A will not work. This fix is specifically meant for OOS 3.
If you are on OOS 3, then try reflashing OOS 3 with a clean flash. This might fix it, but only if you are on OOS 3.
mvha said:
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Click to expand...
Click to collapse
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
locxFIN said:
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
Click to expand...
Click to collapse
Search XDA Forums for V4A profiles and use a preferred profile according to your type of music.
whwhdtk5689 said:
viper4android install than sound break problem is fix?
Click to expand...
Click to collapse
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
arch_geek said:
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
Click to expand...
Click to collapse
yes. i'm oos 3.0 MM.
wow i'm install now viper4android !
thank you !
arch_geek said:
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
Click to expand...
Click to collapse
You've Got a Point. I have installed wrong version of V4A. Now working all. Thank You
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
shakaraja said:
Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Click to expand...
Click to collapse
Hm i had the same problem. Driver Status was false.
My Workaround was i clicked in Viper many Menus up an down. Lock Effect Mode disable to speaker. UI Setting to Expert and suddenly the Driver Status was True.
No cleaning data. I didn´t installed google play music.
With Viper4Anroid on OO2 Oxygen3 the sound are definitly noiser and better. (Master Gain (Limiter) / Output Gaine -20db)
Thx for the hint with these app.
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
How to root your phone. You find it in these guide
> http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
MaxtremePL said:
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
Click to expand...
Click to collapse
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
If you flashed OOS 3, it is highly likely that the build was not a pre-rooted build. To root follow this guide at this link :
http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
anees167 said:
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
Click to expand...
Click to collapse
Actually V4A can be tweaked to sound better than MaxxAudio. Try XtremeMUSIC mod by androidexpert35. It includes V4A as an addon.
Link to the above mod is here: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
&roid said:
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
Click to expand...
Click to collapse
Try XtremeMUSIC mod. Link: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
OnePlus seems to have enabled aptX codecs in the new OB5/14 for the OnePlus 3/T.
For those of you who don't want to wait until the stable release and also would rather not flash the open beta, @Chaosgod27 has extracted the related files for use in the stable release. These files can be placed within OOS 4.1.X to enable aptX mode. These files are different from the old aptX-enabling files that were broken in OOS since updating to 7.1.1.
Edit: It seems there's some issues with the stacks. Playback does use aptX, but music is playing at a slightly higher pitch and faster than it should be.
I've dug around through the files in the new open beta and found the files myself. It seems there were a few missing before. The issue with the raised pitch and fast playback should be gone now.
Flashable Zip (through custom recovery, does not require Magisk): View attachment 4121507
Magisk Module (same thing, just systemless): View attachment 4121508
There was an issue before with some missing files that caused playback to run too fast and with a higher pitch. That has been fixed now. If anyone flashed the old Magisk module, I would advise you to download the new one in the OP and flash over it. I've also included a flashable zip for those of you who aren't using Magisk.
Anova's Origin said:
There was an issue before with some missing files that caused playback to run too fast and with a higher pitch. That has been fixed now. If anyone flashed the old Magisk module, I would advise you to download the new one in the OP and flash over it. I've also included a flashable zip for those of you who aren't using Magisk.
Click to expand...
Click to collapse
Thanks a million
Thank you, I have installed it but it seems to have a lot more problems (noise/cracking as in packets lost or something) than the previous version that I was using and which I got from here:
https://forum.xda-developers.com/oneplus-3/themes/mod-aptx-codec-t3521228
Is there any way to uninstall this version and return to "old default" (from where I can get back to the aptx version from above)?
xclub_101 said:
Thank you, I have installed it but it seems to have a lot more problems (noise/cracking as in packets lost or something) than the previous version that I was using and which I got from here:
https://forum.xda-developers.com/oneplus-3/themes/mod-aptx-codec-t3521228
Is there any way to uninstall this version and return to "old default" (from where I can get back to the aptx version from above)?
Click to expand...
Click to collapse
If you used the Magisk module, simply delete the module and reboot.
If you flashed the regular zip, you'll have to dirty flash your ROM to restore to default.
Hi @Anova's Origin, how do i know if this mod is working or not?
Vixiebalistic said:
Hi @Anova's Origin, how do i know if this mod is working or not?
Click to expand...
Click to collapse
Use a logcat app (Catlog / Matlog) and search for an aptx entry in the recorded logs after you connected your aptx capable device via Bluetooth to your aptx enabled phone...
You should be able to find something if it's working, otherwise it wouldn't show any aptx entry
Sent from my OnePlus3T using XDA Labs
Edit 2: Nevermind, it's working now. Idk what the problem was.
Didn't work for me on OOS 4.1.6 on Oneplus 3T I can't turn on Bluetooth. Anyone else having this problem? Also, have the drivers been updated in a newer OB?
Edit: I am using magisk v13.3
vini2710 said:
Didn't work for me on OOS 4.1.6 on Oneplus 3T I can't turn on Bluetooth. Anyone else having this problem? Also, have the drivers been updated in a newer OB?
Click to expand...
Click to collapse
Nope... Working fine here with op3t 4.1.6. Did u make back up before flashing?
Vixiebalistic said:
Nope... Working fine here with op3t 4.1.6. Did u make back up before flashing?
Click to expand...
Click to collapse
I used magisk so no worries (v13.3)
Edit: It's working. Yay! Thank you for the good work with this module!
how about op3T 4.1.7? Is it work?
qwealan said:
how about op3T 4.1.7? Is it work?
Click to expand...
Click to collapse
It works flawlessly for me on OOS 4.1.7 on my op3t
Sent from my ONEPLUS A3003 using Tapatalk
Anyone, test Magisk module with lineageOS Rom ?
vinicentus said:
It works flawlessly for me on OOS 4.1.7 on my op3t
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
I use Magisk Module on OOS4.1.7 but i cant use aptX (use catlog search "aptx" ). are you use zip flash or use Magisk too?
qwealan said:
I use Magisk Module on OOS4.1.7 but i cant use aptX (use catlog search "aptx" ). are you use zip flash or use Magisk too?
Click to expand...
Click to collapse
I am using magisk (v14)
Working on OP3T with OOS 4.5.1 + Magisk 14.0. Those libs where updated to show battery for devices in OB15, update needed.
Thanks very much! Looking for this about a week long and finally solved
My device is OP3T, with H2OS V3.5 stable, no magisk
can I share this to oneplusbbs.com?
(First time posting here please correct me if this is in the wrong place)
Hello
I have recently rooted my Pixel 2 XL with TWRP and Magisk and wanted to install Viper4Android. But when i try to install the drivers it stops and I get the message
"Installation failed at patching system"
I have the audio modification Library and also got it working on Android 10 before but 11 doesn't work right now.
My question is:
Has anybody already installed V4A on Android 11 successfully and knows a way to do it or will I have to wait for the official release and an updated V4A?
Unfortunately I have the same error with Pixel 2 XL and android 11 (also worked with 10).
I also tried "tricky" install procedures (like this: https://www.the***********.com/install-viper4android-android-10-guide/) but no success yet.
I think the issue is related to Magisk canary and only happens on Pixel 2 (and XL) devices with android 11.
viper4android & Android 11
I have the same issue as well..
Can't get anyone to answer, been to several site, asking the same question
R3vation said:
(First time posting here please correct me if this is in the wrong place)
Click to expand...
Click to collapse
The following thread will get the eyes of most people using Viper
https://forum.xda-developers.com/android/apps-games/app-viper4android-fx-2-6-0-0-t3774651
R3vation said:
I have recently rooted my Pixel 2 XL with TWRP and Magisk and wanted to install Viper4Android. But when i try to install the drivers it stops and I get the message
"Installation failed at patching system"
I have the audio modification Library and also got it working on Android 10 before but 11 doesn't work right now.
My question is:
Has anybody already installed V4A on Android 11 successfully and knows a way to do it or will I have to wait for the official release and an updated V4A?
Click to expand...
Click to collapse
A logcat of the install process would be my starting point. You also do not specify which version of Magisk you are using? If you wish to respond to me, use the above thread, but there will be people with a lot more targeted understanding of your issues on that thread.
DiamondJohn said:
The following thread will get the eyes of most people using Viper
https://forum.xda-developers.com/android/apps-games/app-viper4android-fx-2-6-0-0-t3774651
A logcat of the install process would be my starting point. You also do not specify which version of Magisk you are using? If you wish to respond to me, use the above thread, but there will be people with a lot more targeted understanding of your issues on that thread.
Click to expand...
Click to collapse
I'm also having same problem on pixel 4 XL and it's the new Android and magisk and also the way viper4android installation works i talked to dewitt and he say he will work on that as soon as he knows what changed in magisk
Scytherblack said:
I'm also having same problem on pixel 4 XL and it's the new Android and magisk and also the way viper4android installation works i talked to dewitt and he say he will work on that as soon as he knows what changed in magisk
Click to expand...
Click to collapse
Same for P4. Let me know that he says?
Xdevillived666 said:
Same for P4. Let me know that he says?
Click to expand...
Click to collapse
Yes sir that's only reason i switched back to Android 10 and Dewitt said he dont have no Android 11 running device to test so we'll just wait until android 11 is stable os and they release it for more device
I reckon we'll just need to be patient until the Devs look at compatibility upgrade for Android 11 - that has now been officially released. Everything works for me on my freshly rooted P4XL running R11, apart from V4A. But V4A is my most loved root app (next to Adblock, of course)
@R3vation
I have recently rooted my Pixel 2 XL with TWRP and Magisk and wanted to install Viper4Android. But when i try to install the drivers it stops and I get the message
"Installation failed at patching system"
Click to expand...
Click to collapse
In Magisk grant Viper4Android root permission, then all is good.
jwoegerbauer said:
@R3vation
In Magisk grant Viper4Android root permission, then all is good.
Click to expand...
Click to collapse
Tried that - few times now, no joy...
There might be hope...
Just tried this and it does seem to be working. Haven't fully tested it yet though. But I didn't bootloop and viper seems to work. Pixel 3a XL on Android 11. Rooted with Magisk Canary, e66b0bf3 (20425).
YouTube link
SirAugustine said:
Just tried this and it does seem to be working. Haven't fully tested it yet though. But I didn't bootloop and viper seems to work. Pixel 3a XL on Android 11. Rooted with Magisk Canary, e66b0bf3 (20425).
YouTube link
Click to expand...
Click to collapse
Works for me as well
SirAugustine said:
Just tried this and it does seem to be working. Haven't fully tested it yet though. But I didn't bootloop and viper seems to work. Pixel 3a XL on Android 11. Rooted with Magisk Canary, e66b0bf3 (20425).
YouTube link
Click to expand...
Click to collapse
Thanks mate
Same issue on Android 11 on my Oneplus 8 Pro. Would love an answer, or an alternative to Viper for the time being. Its one thing I can't seem to live without.
SirAugustine said:
Just tried this and it does seem to be working. Haven't fully tested it yet though. But I didn't bootloop and viper seems to work. Pixel 3a XL on Android 11. Rooted with Magisk Canary, e66b0bf3 (20425).
YouTube link
Click to expand...
Click to collapse
Can anyone confirm the safety of this file? Ichigo Kywrosaki is an anime character
State.of.mind said:
Can anyone confirm the safety of this file? Ichigo Kywrosaki is an anime character
Click to expand...
Click to collapse
The customize.sh is completely different, as well as the module.prop. They use completely different install methods.
This unofficial build seems to install the app as a system app, while the official module installs it as a user app. As a result, permissions are granted in a system-level config file, though none look suspicious.
I haven't compared APK files, so I don't know anything about the actual app code.
The only thing that I consider mildly suspicious is the fact that the app copies native audio library binaries into certain locations; these could potentially be malicious. I doubt that they are, though.
After installing this, my Pixel 3a has been randomly reporting 'missing codec' when attempting playback of FLAC files via MediaMonkey.
I also recently got the TRN BT20S bluetooth adapters for my IEMs, could be the intersection of the two, will keep testing.
Restart usually clears things up, but not the best solution.
I'm missing something, how do you download this form the link?
BracesForImpact said:
I'm missing something, how do you download this form the link?
Click to expand...
Click to collapse
Click the description of the video and there is a google drive link to dload it from
JackRandalt said:
This is why I never use Viper. I prefer Whatsapp. It never has such issues.
Click to expand...
Click to collapse
Wut? Whatsapp is a message app.
Hello,
After not touching any root related stuff in the last 2 years, I decided to root my new oneplus nord 2. It is running android 11.
I have magisk manager and I wanted to install an audio mod on it. First I tried Viper4Android, which didn't work in any way I tried, and cannot change SELinux to permissive sadly. V4A keeps prompting me to install the drivers even tho they are visible in Magisk.
After that I went to JamesDSP and tried installing that too. Tried both flashing it with Magisk, as well as installing the apk. In both cases as soon as I open the JamesDSP app, it opens up for half a second than closes again.
I've noriced the audio mod apps are kind of finicky. Was hoping some of you guys might be able to suggest some things I can try that I am unaware of. Or maybe an audio mod alternative that I haven't heard about?
NimeniAltu666 said:
Hello,
After not touching any root related stuff in the last 2 years, I decided to root my new oneplus nord 2. It is running android 11.
I have magisk manager and I wanted to install an audio mod on it. First I tried Viper4Android, which didn't work in any way I tried, and cannot change SELinux to permissive sadly. V4A keeps prompting me to install the drivers even tho they are visible in Magisk.
After that I went to JamesDSP and tried installing that too. Tried both flashing it with Magisk, as well as installing the apk. In both cases as soon as I open the JamesDSP app, it opens up for half a second than closes again.
I've noriced the audio mod apps are kind of finicky. Was hoping some of you guys might be able to suggest some things I can try that I am unaware of. Or maybe an audio mod alternative that I haven't heard about?
Click to expand...
Click to collapse
Ok I will taste some audio mods and let you know which is working for nord2
You're the real MVP. There's a chance I did something wrong or some detail I've missed along the way as quite some things have changed since I was into rooting and all these stuff.
NimeniAltu666 said:
You're the real MVP. There's a chance I did something wrong or some detail I've missed along the way as quite some things have changed since I was into rooting and all these stuff.
Click to expand...
Click to collapse
Sorry for I was using GSI today I will revert to OOS and then flash flash the audio mm OD and report back here
Hello, have you managed to get anything to work for an audio mod?
NimeniAltu666 said:
Hello, have you managed to get anything to work for an audio mod?
Click to expand...
Click to collapse
No tried each and every mod not working
Similar problem.. and the problem is ONLY switch seLinux - permessive/ ... How to be, I don't know
DeMiane said:
Similar problem.. and the problem is ONLY switch seLinux - permessive/ ... How to be, I don't know
Click to expand...
Click to collapse
We are releasing custom rom with Dolby Atmos working sooom
pankspoo said:
We are releasing custom rom with Dolby Atmos working sooom
Click to expand...
Click to collapse
link please
DeMiane said:
link please
Click to expand...
Click to collapse
Not released till now
pankspoo said:
Not released till now
Click to expand...
Click to collapse
)) Then why answer ...