Related
Hi
I purchased from lightake.com a android TV, named as "MK809III RK3188 Cortex-A9 Quad Core 1.8GHz TV Box w/ Bluetooth WIFI HDMI OTG 2GB/8GB Black" It came with 4.1.1 installed and although sometimes it reseted by itself, it was working. As from the outside it's just the same shell as W2COMP's and it was named equally I installed the MK809III 4.2 version available at w2comp.
It took some time to flash it, because the reset hole was not over the reset switch... OK, I just did a new hole and I was able to flash it.
The problem is that now it properly boots, but neither the WiFi nor Bluetooth work anymore... I began to read about the many names of the beast... I found that Rikomagic 809IV was said to be the same... I downloaded the firmware, I flashed it but the WiFi still doesn't work... Same happened with other ROMs. (MK820IV, from rikomagic, tronsmart MK908)
I guess that the problem is that the WiFi/Bluetooth chipset is an AP6210, and it’s not supported on these ROMs.
I have been said that this was an UGOOS unit and their sales dpt. has told me that they haven't produced any RK3188 with AP6210 inside...
Can you help me to identify it? Or tell me which ROM could be suitable for this? Or a original ROM?
Best regards and thank you!!
Eduardo
did you back up the rom using nandroid backup app to sd card? ?
jedu said:
Hi
I purchased from lightake.com a android TV, named as "MK809III RK3188 Cortex-A9 Quad Core 1.8GHz TV Box w/ Bluetooth WIFI HDMI OTG 2GB/8GB Black" It came with 4.1.1 installed and although sometimes it reseted by itself, it was working. As from the outside it's just the same shell as W2COMP's and it was named equally I installed the MK809III 4.2 version available at w2comp.
It took some time to flash it, because the reset hole was not over the reset switch... OK, I just did a new hole and I was able to flash it.
The problem is that now it properly boots, but neither the WiFi nor Bluetooth work anymore... I began to read about the many names of the beast... I found that Rikomagic 809IV was said to be the same... I downloaded the firmware, I flashed it but the WiFi still doesn't work... Same happened with other ROMs. (MK820IV, from rikomagic, tronsmart MK908)
I guess that the problem is that the WiFi/Bluetooth chipset is an AP6210, and it’s not supported on these ROMs.
I have been said that this was an UGOOS unit and their sales dpt. has told me that they haven't produced any RK3188 with AP6210 inside...
Can you help me to identify it? Or tell me which ROM could be suitable for this? Or a original ROM?
Best regards and thank you!!
Eduardo
Click to expand...
Click to collapse
vwbug2007 said:
did you back up the rom using nandroid backup app to sd card? ?
Click to expand...
Click to collapse
Nope...
JEdu
jedu said:
Hi
I purchased from lightake.com a android TV, named as "MK809III RK3188 Cortex-A9 Quad Core 1.8GHz TV Box w/ Bluetooth WIFI HDMI OTG 2GB/8GB Black" It came with 4.1.1 installed and although sometimes it reseted by itself, it was working. As from the outside it's just the same shell as W2COMP's and it was named equally I installed the MK809III 4.2 version available at w2comp.
It took some time to flash it, because the reset hole was not over the reset switch... OK, I just did a new hole and I was able to flash it.
The problem is that now it properly boots, but neither the WiFi nor Bluetooth work anymore... I began to read about the many names of the beast... I found that Rikomagic 809IV was said to be the same... I downloaded the firmware, I flashed it but the WiFi still doesn't work... Same happened with other ROMs. (MK820IV, from rikomagic, tronsmart MK908)
I guess that the problem is that the WiFi/Bluetooth chipset is an AP6210, and it’s not supported on these ROMs.
I have been said that this was an UGOOS unit and their sales dpt. has told me that they haven't produced any RK3188 with AP6210 inside...
Can you help me to identify it? Or tell me which ROM could be suitable for this? Or a original ROM?
Best regards and thank you!!
Eduardo
Click to expand...
Click to collapse
yadi.sk/d/T9LLU1wH5tZRa work
Rikomagic MK802IV with AP6210 support
Official Rikomagic ROM
Try this MK802IV rom, as it's a new rom that's developed with AP6210 support
http://www.sendspace.com/pro/dl/z80zb4
Good luck
--------- Just realized that the link is dead, also the official link is down so I guess that you'll have to keep an eye on the rikomagic forum until a new one pops up.
http://minipute.com/2013/07/24/new-mk802iv-custom-rom-supports-ap6210-wi-fi-chip/2531
jedu said:
Hi
I purchased from lightake.com a android TV, named as "MK809III RK3188 Cortex-A9 Quad Core 1.8GHz TV Box w/ Bluetooth WIFI HDMI OTG 2GB/8GB Black" It came with 4.1.1 installed and although sometimes it reseted by itself, it was working. As from the outside it's just the same shell as W2COMP's and it was named equally I installed the MK809III 4.2 version available at w2comp.
It took some time to flash it, because the reset hole was not over the reset switch... OK, I just did a new hole and I was able to flash it.
The problem is that now it properly boots, but neither the WiFi nor Bluetooth work anymore... I began to read about the many names of the beast... I found that Rikomagic 809IV was said to be the same... I downloaded the firmware, I flashed it but the WiFi still doesn't work... Same happened with other ROMs. (MK820IV, from rikomagic, tronsmart MK908)
I guess that the problem is that the WiFi/Bluetooth chipset is an AP6210, and it’s not supported on these ROMs.
I have been said that this was an UGOOS unit and their sales dpt. has told me that they haven't produced any RK3188 with AP6210 inside...
Can you help me to identify it? Or tell me which ROM could be suitable for this? Or a original ROM?
Best regards and thank you!!
Eduardo
Click to expand...
Click to collapse
(Old thread, I know, but might help others.)
This ROM works wonders for me:
NEOMODE CUSTOM ROM MK809III AP6210 Version 1.9a
If you are a bit more daring, try this:
MK809III AP6210 NEOTV CROM Version 2.0 1080p
(I'm not yet allowed to post URLs on this forum, so you'll have to use Google).
jedu said:
Hi
I purchased from lightake.com a android TV, named as "MK809III RK3188 Cortex-A9 Quad Core 1.8GHz TV Box w/ Bluetooth WIFI HDMI OTG 2GB/8GB Black" It came with 4.1.1 installed and although sometimes it reseted by itself, it was working. As from the outside it's just the same shell as W2COMP's and it was named equally I installed the MK809III 4.2 version available at w2comp.
It took some time to flash it, because the reset hole was not over the reset switch... OK, I just did a new hole and I was able to flash it.
The problem is that now it properly boots, but neither the WiFi nor Bluetooth work anymore... I began to read about the many names of the beast... I found that Rikomagic 809IV was said to be the same... I downloaded the firmware, I flashed it but the WiFi still doesn't work... Same happened with other ROMs. (MK820IV, from rikomagic, tronsmart MK908)
I guess that the problem is that the WiFi/Bluetooth chipset is an AP6210, and it’s not supported on these ROMs.
I have been said that this was an UGOOS unit and their sales dpt. has told me that they haven't produced any RK3188 with AP6210 inside...
Can you help me to identify it? Or tell me which ROM could be suitable for this? Or a original ROM?
Best regards and thank you!!
Eduardo
Click to expand...
Click to collapse
If you open the case (use a guitar pick to gently prise open the case going around a little at a time) you'll be able to see the wifi chip which will be marked with its make and model.
Hi! I bricked my tv box and she stop work,only show amlogic logo.
I looking for firmware for tv android box M8 tt amlogic s802 with realtek 8723bs chip
I tray many rom who find on internet but without results. Motherboard is M8&M9_V02
I cant find ROM,anyone help me please?
In time when i wait for help i flash rom for probox Probox-ex2 with sd card an have functionaly tv box,but no work wifi bloototh and remote control. I tray many many roms,only this probox and rom for mx III have boot and everthing work but wifi bt nd remote control no,because in my box is realtek wifi chip.Now,i dont know how to port realtek driver in my rom...if anybody have seems box can you make backup and upload it?
I have fount 2 rom who works on this box,but no working wifi,remote control and bluetooth...one rom is for probox ex2 and other is for mx III and booth works ok but no wifi...How to flash driver for wifi only in this rom?
i have the same ott tv m8 Fake box!
But i´m confused with this little box from Hell.
For me Probox Ex2 Rom ends with flashing at 2%. I have to flas via USB Burning Tool, because another earlier Firmware flash had to go wrong.
what is with the other Rom? You talk about 2 Roms.
Probox Ex2 Rom must flash with tothpick method and sd card,also other rom for mx 3
Hello, I recently bought a GT1. I would have liked to switch to Android TV but none of the available roms is compatible with my box, each time it's a brick, forced to flash the basic rom. Looking better, I did not find a compatible ROM with my serial number starting with LPN1. Do you have a track to flash something that works or there is nothing available?
best regards
LaPxWaSs said:
Hello, I recently bought a GT1. I would have liked to switch to Android TV but none of the available roms is compatible with my box, each time it's a brick, forced to flash the basic rom. Looking better, I did not find a compatible ROM with my serial number starting with LPN1. Do you have a track to flash something that works or there is nothing available?
best regards
Click to expand...
Click to collapse
I just flashed https://www.atvxperience.com/download/s912-v2ff-ddr-lpddr-ram-18-oct-2018/ successfully on mine.. Used the s912_LPDDR_atvXperience_v2FF.img file.. So far so good.. Flashed using USB to USB, and USB burning tool 2.1.6.. Android TV 7.1.2.. LPN1 32g/3g ddr4.. Only one I've found so far but was worried about hard brick so waiting till someone else confirmed it
Edit: Well, not sure now.. Seems every app that I've downloaded (Kodi, Chrome, VLC, the usual) minus showbox works fine but a lot of the apps that were originally on there (atvx apps) just crash out.. May have been a bad flash or I'm missing something simple. Will try reflashing later but it definitely doesn't brick it..
Hi, this version is compatible with the serial number LPN1? By reflashing all your applications work
LaPxWaSs said:
Hi, this version is compatible with the serial number LPN1? By reflashing all your applications work
Click to expand...
Click to collapse
It doesn't matter what the serial number is. All that matters is the architecture of the components of the ROM you're installing match up with the architecture of the box you have. In your case, any of the ROMs supporting the Amlogic s912 Octocore chipset should work on a Beehive GT1 Ultimate.
It sounds like a mistake you're making in the flashing process that is bricking your device, not the fault of the actual ROM.
Anyone know where to get Android 9.0 firmware for gt1_313M0 ? Is Android 6.0.1 really the final version of Android for this?!?!
I own the Bqeel 2019 Android 8.1 TV Box Y4 MAX / Amlogic S905X2 Quad Core / 4G DDR4+64G eMMC / Dual WIFI 2.4/5.8G + 100M LAN / tv box Bluetooth 4.0 / USB 3.0/ HDMI 2.1 /4K Smart TV Box .
I have tried many custom roms and none of them seem to work in the correct manner. I am able to use the latest USB burning tool but lot of these custom roms will flop on me after the install process. I feel like there is something usually wrong with the WIFI side. if it is not a wifi problem, then it is the remote control.
I have yet to find a custom rom where I can load and then use the device the way it is suppose to be. I want the remote to work correctly. Keep in mind that I do have a direct Ethernet connection for this device.
I have contacted the original manufacturer hoping that they can send me the original default firmware.
Back to the topic, i am interested in the best, the latest, and the one the works the most for this device. All solutions have failed for me thus far.
ps: i will re try the following .img files that I was able to obtain from FreakTabs
- XTM_ATV_X96_4_4 (this one will not connect to the internet directly. it needs a cell phone or tablet, so i can transfer over the Wifi and Google Account settings. For some reason, this is impossible because it keeps asking for my WIFI password which i have entered many times in the device);
- Poison_S905x2_V2.0 (this one is easy to install but after the install, the GUI seems stuck. I can't open up any apps, and the weather icon is always spinning).
Again, i have tried maybe 5 different custom roms from freaktabs (i am sure they are posted here) and none of them seem to work.
Hello , i have same issue here
i flashed many times with many roms and no one work properly.
Sometimes i have no wifi/ethernet or no remote.
please if someone have the stock firmware of Bqeel y4 max 905x2 4/64go
Post it!!
really sorry for my english
alilous1000rr said:
Hello , i have same issue here
i flashed many times with many roms and no one work properly.
Sometimes i have no wifi/ethernet or no remote.
please if someone have the stock firmware of Bqeel y4 max 905x2 4/64go
Post it!!
really sorry for my english
Click to expand...
Click to collapse
I have the same problem.
I have tried many custom roms but nothing seems to work. Wifi and Bluetooth issues is a problem.
I too need STOCK firmware. I have extra device that is not been messed around with but i do not know how to make back up from stock rom. If i can make stock up rom with one app, i will do it ASAP and perhaps share it.
Edit: So I am able to obtain a back up of the stock firmware via Twrp from my second device, but it is not compatible with the other Bqeel system. All i see is the Bqeel Boot Logo.
I am still able to boot into recovery, and i can also install other custom roms (those custom roms stink).
I still need the orgiinal stock firmware in .img or i need a custom rom that actually works really great.
For those who want to purchase this device, you can but do not mess with custom roms. Just remove default apps and enjoy the default OS.
I contact the seller of my box (bqeel y4 max 4/64go) today
he gonna send me the stock firmware Asap.
I 'll share it when i 'll recieve it.
Thanks
alilous1000rr said:
I contact the seller of my box (bqeel y4 max 4/64go) today
he gonna send me the stock firmware Asap.
I 'll share it when i 'll recieve it.
Thanks
Click to expand...
Click to collapse
I did the same thing. They sent me the stock firmware. the device works great now! there is another hiccup though. For usb burning tool, you will need some license files. when you load the .img file in the program, it will not accept it. You need the license files (just transfer them in the directory in usb burning tool)
here is the link for license files and stock firmware.
https://mega.nz/#F!TvoShAAK!Jd0X15aoHWVdOf1rrYPc0g
I tried that firmware in my box and it freezes on logo!!!
any news for this device? I have tried many custom OS but none work due to missing drivers.
LooseEnd85 said:
I did the same thing. They sent me the stock firmware. the device works great now! there is another
Click to expand...
Click to collapse
What did you actually wrote into the message? I'm in touch with them since a few days but I cannot go over than "we can replace the unit"!
BTW, my Device Build Fingerprints: Amlogic/u211/u211:8.1.0/OPM1.171019.011/20190402:user/release-keys
Bqeel 2019 Android 9.0 TV Box Y4 MAX / Amlogic S905X2 Quad Core / 4G DDR4+64G eMMC / Dual WIFI 2.4/5.8G + 100M LAN / tv box Bluetooth 4.0 / USB 3.0/ HDMI 2.1 /4K UHD Smart TV Box
Yes... it should have android v9 but it's a v8.1... I found the error when the Amazon return window was already closed...
https://www.bqeel.net/download.html
There are firmwares from bqueel
Hi
Can somebody now tell me if firmware from bqeel.net works or not becuse I've seen a loot that say it's stuck at logo screen or it won't boot
Does it work or no?
so far the best custom ATV ported ROM I've found for this box is here: https://forum.freaktab.com/forum/tv...ionatv__bqeel_u214-y8_max_1000m_s905x3-test57
it is due for an update but works as is. I also have a SlimBox ROM that works for the Bqeel but I'll have to upload that to my Mega folder and share the link.
EDIT: nevermind my boxi s the Y8 Max this is asking for the Y4 Max,.
Hi,
I've recently flashed Aidan's rom ATV9 on the subject box. Everything works perfect except that Audio passthrough is not supported through Kodi. So my receiver does not play Dolby digital/plus, DTS etc...
I understand it's not the ROM's problem. I read extensively on this topic, and found from Kodi's forum that this is a problem specific to Android 9. If the OS does not support audio passthrough, then Kodi won't be able to pass through the raw audio. I had android 7 installed on the box which supported audio passthrough, but this version is so old other functionalities are not available. I'm wondering if Android 8 would solve this problem. If yes, does anyone know if any past versions of Aidan's rom are available (possibly have an android 8) for testing. I can only find version 9 on the internet now.
thanks!
J