LATEST TWRP FOR ONEPLUS 2, PORTED FROM NEXUS 6P.
WORKS WELL WITH ANDROID 11.
Latest VS Official 3.2:
Official TWRP 3.2 is built with OnePlus 2 by TWRP official and should be stable.
This unofficial TWRP 3.5.2 is ported from Nexus 6P's official one. The newer version means better support to new ROMs, especially Android 11 and higher. But please notice I can't promise that it is stable and everything works properly.
Installation:
Boot your phone into fastboot, connect it to your computer (or any other device that could run fastboot commands), make sure the driver is installed correctly.
Code:
# For flashing to recovery partition
fastboot flash recovery PATH/FILENAME.img
# For booting into TWRP temporarily
fastboot boot PATH/FILENAME.img
Known Issue(s):
Chinese Language XMLs currently not working.
Download:
Android File Host
Hello, and thanks for posting this! Can you explain what files were replaced, also where is the original source?
bitpushr said:
Hello, and thanks for posting this! Can you explain what files were replaced, also where is the original source?
Click to expand...
Click to collapse
Here is the source of the file:
Download twrp-3.5.0_9-0-angler.img
Download page for twrp-3.5.0_9-0-angler.img
dl.twrp.me
I unpacked it and replaced kernel.gz, recovery.fstab (in /initrd/etc/) and keys (in /initrd/res) and modified some values in /initrd/default.prop
What kernel.gz did you replace it with?
bitpushr said:
What kernel.gz did you replace it with?
Click to expand...
Click to collapse
from the oneplus2 twrp 3.4.0:
Download mukul2259 from SourceForge.net
Maybe stupid question, but what are benefits of this one over official 3.2?
dankovac1999 said:
Maybe stupid question, but what are benefits of this one over official 3.2?
Click to expand...
Click to collapse
It's much more friendly to Android 11 ROMs, though sadly we don't have one usable yet : (
Can I treblize my device with this recovery?
Missignal_Dev said:
It's much more friendly to Android 11 ROMs, though sadly we don't have one usable yet : (
Click to expand...
Click to collapse
It changed yesterday! Im moving to this recovery. But Im just wondering why isnt this device officially supported, when lot of older devices are.
dankovac1999 said:
It changed yesterday! Im moving to this recovery. But Im just wondering why isnt this device officially supported, when lot of older devices are.
Click to expand...
Click to collapse
Because it is old and not that popular. BTW. thank you for telling me this, I'm going to flash LOS 18.1. FINALLY AN USABLE ANDROID 11!!
Jaiwantn said:
Can I treblize my device with this recovery?
Click to expand...
Click to collapse
No.
**THIS WILL BE DISCONTINUED, INSTEAD I BUILT ORANGEFOX RECOVERY USING OP2 DEVICE TREE WHICH SUPPORTS ANDROID 11 PRETTY WELL.
Missignal_Dev said:
**THIS WILL BE DISCONTINUED, INSTEAD I BUILT ORANGEFOX RECOVERY USING OP2 DEVICE TREE WHICH SUPPORTS ANDROID 11 PRETTY WELL.
Click to expand...
Click to collapse
Pls provide download link of that
Jaiwantn said:
Pls provide download link of that
Click to expand...
Click to collapse
I'm writing the post, wait a minute
Jaiwantn said:
Pls provide download link of that
Click to expand...
Click to collapse
[RECOVERY][UNOFFICIAL] OrangeFox Recovery Project [R11.1][BETA v3]
Note: This is still a beta stage, I need your help in testing, thank you very much! (If you find a problem, please let me know) /* * Your warranty is now void. * * We're not responsible for bricked devices, dead SD cards, * thermonuclear war...
forum.xda-developers.com
Related
Unrooted CM13 for Oneplus 2
Legal Bit:
Your warranty is now void. HA! This is Oneplus were talking about
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
WHAT IS THIS ROM?
This rom is based of the original Cyanogen Mod however root option has been removed off the rom. This allows for the use of all major banking apps without installing extra Xposed modules and is great for people who want the benefits of Cyanogen Mod without the risks of having root!
All of the default apps work without issues and that includes the theme engine because none of it requires root access!
Once I have compiled the code I will always test it on my Oneplus 2 to make sure that it works without issues.
Downloads
INFORMATION: I am unable to produce builds at this time as I am extremely busy and unfortunately this comes second. I'll post an update when I am able to continue STABLE - Last updated 24-04-2016
OTA:
Primary
OneDrive Mirror
FULL ROM:
Primary
OneDrive Mirror
Screenshots
Inatallation
Coming from a vanilla Cyanogen 13 rom:
1. Flash the OTA from downloads
2. Flash ARM 64 GApps if you havent already
Coming from another rom:
1. Perform full wipe
2. Flash rom through recovery
3. Flash ARM64 GApps
Coming from another 6.0.1 rom:
1. Flash oxygen os modem
2. Flash rom through recovery
3. Flash ARM64 GApps
Thanks to @urgali for this fix!
From Stock:
1. Flash rom through recovery
2. Flash ARM64 GApps
DONTATIONSIf you want to help me out by donating then please click HERE! It would be much appreciated and will help me get more resources to help build ROM's faster!
If you have anything you would like to see adding to this ROM please let me know and I'll see what I can do!
Sources:
Device Tree
KERNAL
Vendor Files
XDA:DevDB Information
Unrooted CM13 for Oneplus 2, ROM for the OnePlus 2
Contributors
MrSheen123
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1.0.0
Stable Release Date: 2016-03-29
Created 2016-03-30
Last Updated 2016-05-25
Reserved
Wow. Nice, I can now use it my bank's app in OP2 too. Nice. Thanks a lot.
@MrSheen123 sorry mate....are you planning to do nightly?Tnx a lot
Flamehell said:
@MrSheen123 sorry mate....are you planning to do nightly?Tnx a lot
Click to expand...
Click to collapse
Hi,
I will give it my best shot to make it a nightly process but I can't guarantee it unfortunately.
-Sean
krishna442 said:
Wow. Nice, I can now use it my bank's app in OP2 too. Nice. Thanks a lot.
Click to expand...
Click to collapse
Your welcome good to have positive feedback! You will see the root options still in developer options but rest assured they don't work. I'm currently figuring out how to remove the options as well to make it cleaner!
-Sean
Um how exactly do you plan on having CM features when these need root for the settings to work? Pretty sure no root will break themes also?
MrSheen123 said:
Your welcome good to have positive feedback! You will see the root options still in developer options but rest assured they don't work. I'm currently figuring out how to remove the options as well to make it cleaner!
-Sean
Click to expand...
Click to collapse
Nice Sean.
May be this will help.
Code:
listItems.remove(position);
here position is your list row id
notifyDataSetChanged();
krishna442 said:
Nice Sean.
May be this will help.
Code:
listItems.remove(position);
here position is your list row id
notifyDataSetChanged();
Click to expand...
Click to collapse
Sweet thanks! I'll look into adding it
djsubterrain said:
Um how exactly do you plan on having CM features when these need root for the settings to work? Pretty sure no root will break themes also?
Click to expand...
Click to collapse
Hi,
Themes are coded into the OS and do not require root for them to function. Plus you get the benefits like the speed, battery life and other great features!
-Sean
Bump and also to say the full ROMS are being uploaded and beta section created
@The_Merovingian
I cannot see any Sources like Device, Kernel and Source Code
Regards,
Taker18
Info
Ah yes I can get the source code for the main cyanogen but I am new to Android development so I am not sure how to do the other two and get it right. Any tips?
Taker18 said:
@The_Merovingian
I cannot see any Sources like Device, Kernel and Source Code
Regards,
Taker18
Click to expand...
Click to collapse
MrSheen123 said:
Ah yes I can get the source code for the main cyanogen but I am new to Android development so I am not sure how to do the other two and get it right. Any tips?
Click to expand...
Click to collapse
who is building this cm13 builds?
I am
I am building these builds
Taker18 said:
who is building this cm13 builds?
Click to expand...
Click to collapse
MrSheen123 said:
I am building these builds
Click to expand...
Click to collapse
and witch device and kernel repos you are using?
For the rom
https://github.com/CyanogenMod/android_device_oneplus_oneplus2
Kernel:
https://github.com/CyanogenMod/android_kernel_oneplus_msm8994
Taker18 said:
and witch device and kernel repos you are using?
Click to expand...
Click to collapse
MrSheen123 said:
For the rom
https://github.com/CyanogenMod/android_device_oneplus_oneplus2
Kernel:
https://github.com/CyanogenMod/android_kernel_oneplus_msm8994
Click to expand...
Click to collapse
The write in OP
Sources:
Device link
Kernel link
and then put the Source Code of Cm13 also in
Regards,
Taker18
Ah right ok
No problems i will do that now
Taker18 said:
The write in OP
Sources:
Device link
Kernel link
and then put the Source Code of Cm13 also in
Regards,
Taker18
Click to expand...
Click to collapse
my phone is rooted, can i still intall this unrooted cm13? and will it unrooted my phone? i want to use some banking apps that why i tot of installing this. Thanks in advance.
Android is an open source software stack created for a wide array of devices with different form factors. The primary purposes of Android are to create an open software platform available for carriers, OEMs, and developers to make their innovative ideas a reality and to introduce a successful, real-world product that improves the mobile experience for users.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Change Log:
29/05/2017:
Download the latest source.
Reset device tree developments.
Progress
Android system.
Audio: it was working great on 7.1.1, will investigate on the problem once get a stable marshmallow device tree to use for nougat then android o.
Display.
Bluetooth (Bluetooth Share fc is fixed).
Camera: sometime crash.
GPS.
Graphics: hwcomposer has been disabled.
NFC.
Sensors.
Storages.
Wifi
Source Code to make other roms
Device Tree: https://github.com/hak86/android_device_huawei_hi6210sft
Kernel GPLv2 compliant Kernel: https://github.com/hak86/android_kernel_huawei_hi6210sft
Click to expand...
Click to collapse
Downloads AOSP 7.0:
Gapps: click here.
ROM: click here.
Install ROOT:
Download the flashable from here.
Reboot to TWRP.
Click on Install.
Choose SR3-SuperSU-v2.79-SR3-20170114223742.
Confirm the action to start install.
Wait a few seconds until installation is done before reboot.
Your device should be rooted now.
Installation via TWRP:
Download the latest version.
Copy the rom into memory card.
Do a backup to your sdcard before flash the rom.
Click on Wipe.
Choose Cache, Dalvik, Data and System .
Slide the screen to wipe.
Click on Install.
Choose the rom you copy on sdcard.
Slide the screen to install.
Reboot, enjoy.
Contributors
@haky 86
Source Code: https://android.googlesource.com
ROM OS Version: 7.x.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.0 or up
Version Information
Status: beta
Created 2017-01-01
Last Updated 2017-29-05
haky 86 said:
-snip-
Click to expand...
Click to collapse
Great! I'll probably test it tomorrow, but by then you might have received more feedback
Reserved
Will take a look to boot.img tomorrow and reduce blobs to the minimal one needed for graphics.
XePeleato said:
Great! I'll probably test it tomorrow, but by then you might have received more feedback
Click to expand...
Click to collapse
thanks bro, i did the fault to send the device under holidays.. but should be ready soon. :angel:
Hi haky i Will test it now so stay tuned now i will make up some adb stuff for logcat
Spineshankumb said:
Hi haky i Will test it now so stay tuned now i will make up some adb stuff for logcat
Click to expand...
Click to collapse
I hope to get worked
Ciao
haky 86 said:
I hope to get worked
Ciao
Click to expand...
Click to collapse
Basketbuild connection is low maybe if i can help u after download i will upload on my Drive folder for a better connection...10 minutes for finish and i'm on 100mbps
Hello mate. A question does not need a base eg the b052 to install it? Or there is no problem from any other version .. Greetings Happy New Year !!
@haky 86 in my case, i installed it on my 4X (che2-l03, hi6210sft), and it shows the logo (not bootanimation), then restarts itself on recovery/twrp
btw, i was using an P8 Lite rom, so i guess that isn't a problem (ALE-L21C432B568)
I don't know if i can do something more to help
Ok after a full wipe and flash the device automatically reboot it self into recovery mode :S
Whats working and whats not working?
Sent from my ALE-L21 using Tapatalk
daaasek said:
Whats working and whats not working?
Sent from my ALE-L21 using Tapatalk
Click to expand...
Click to collapse
We don't know.
The OP (Haky 86) can't test it because his phone is bricked, he is waiting to get it back from repair. He needs feedback from users.
Spineshankumb said:
Ok after a full wipe and flash the device automatically reboot it self into recovery mode :S
Click to expand...
Click to collapse
That's mean it's a selinux issue, I will check cm-14.1 tree configuration and re-upload only boot image.
Spineshankumb said:
Ok after a full wipe and flash the device automatically reboot it self into recovery mode :S
Click to expand...
Click to collapse
Same for me, after wipe and flash it reboot into recovery.
haky 86 said:
That's mean it's a selinux issue, I will check cm-14.1 tree configuration and re-upload only boot image.
Click to expand...
Click to collapse
I recommendyou to use my ESAL kernel, aosp-7.0 branch, it includes the SeLinux patches.
what??? 02-02-2017
juanche007 said:
what??? 02-02-2017
Click to expand...
Click to collapse
It's my fault
panchovix said:
@haky 86 in my case, i installed it on my 4X (che2-l03, hi6210sft), and it shows the logo (not bootanimation), then restarts itself on recovery/twrp
btw, i was using an P8 Lite rom, so i guess that isn't a problem (ALE-L21C432B568)
I don't know if i can do something more to help
Click to expand...
Click to collapse
haky 86 said:
It's my fault
Click to expand...
Click to collapse
Hi @haky 86 is this the newest boot.img with selinux fixed?
https://basketbuild.com/devs/haky86/HuaweiP8Lite/Roms/AOSP/7.1.1/boot
thank u for ur time i'm ready with log cat cause we need to fix more than boot
Spineshankumb said:
Hi @haky 86 is this the newest boot.img with selinux fixed?
https://basketbuild.com/devs/haky86/HuaweiP8Lite/Roms/AOSP/7.1.1/boot
thank u for ur time i'm ready with log cat cause we need to fix more than boot
Click to expand...
Click to collapse
Even with new boot.img device reboots in recovery for me, did you get it working?
Lemon476 said:
Even with new boot.img device reboots in recovery for me, did you get it working?
Click to expand...
Click to collapse
i was making a backup of my current clean ROM so now i will try but i think the error is still the same. Have u flashed using option in TWRP flash img or have u putted it using adb?
TWRP 3.5.2_9 FOR GALAXY J5 (2016)
DISCLAIMER : I AM NOT RESPONSIBLE VOIDING YOUR WARRANTY OR ANY DAMAGE CAUSED TO YOUR DEVICE
FEATURES
-Standard TWRP 3.5.2 features
**-Nano and bash removed for now
-Built with Android 9.0 sources
-Backup/restore/format/mount:
-IMEI 1, IMEI 2, FRP PARTITION, EFS, APNHLOS, RPM, MODEM, HIDDEN, QSEE, QHEE, PERSDATA, USB OTG
-Android 11 compatible
-Encryption
-J510H support dropped due to lack of feedback from users
BUGS/KNOWN ISSUES
-None so far
***Backup and restore info***
Some have reported having issues backing up and restoring beginning with Android 10, where upon restoring, a bootloop/stalled boot up occurs. A root fix flashable zip was referenced as the fix to this.
The official solution to this, per TWRP managerial staff, is when backing up the system partition, use the system image instead of system. Its more reliable and efficient.
INSTALLATION
1. Download TWRP image to your device
2. Reboot to Recovery
3. Install
-a. via TWRP by selecting Install, Install Image, then select the image.-b. via OrangeFox as a normal install.4. Reboot to recovery.
5. Enjoy!
DOWNLOAD
J5XNLTE/J5XLTE
https://twrp.me/samsung/j5xnlte.html
J5XLTECMCC
https://twrp.me/samsung/j5xltecmcc.html
Credits
TWRP Team
Zakaryan2004 for his assistance
Sources
TWRP source: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Device and Kernel trees: https://github.com/teamwin
XDA:DevDB Information
[RECOVERY] TWRP 3.5.2_9 for Galaxy J5 (2016), Tool/Utility for the Samsung Galaxy J5
Contributors
palmbeach05
Version Information
Status: Stable
Current Stable Version: 3.5.2_9
Stable Release Date: 2021-04-19
Created 2019-10-01
Last Updated 2021-04-19
When might it be available?
Awesome! I will install it when available.
shreejalm said:
When might it be available?
Click to expand...
Click to collapse
I'm guessing later on today. I submitted the markdown about 3 hrs ago. Just waiting on word from the twrp team to say its uploaded
Wooow thanks so much!
Thank you so much
nice to see twrp official.
Ota install doesn't work..
Bogdans29 said:
Ota install doesn't work..
Click to expand...
Click to collapse
If i'm not mistaken, i tried coordinating with zakaryan2004 and he said ofox had the same issue. However jens 3.2.3 did have that feature. I have been unable to replicate his success on this or the 2015 version. Best advice, download the rom normally, and update that way until i can track down a patch to implement.
palmbeach05 said:
If i'm not mistaken, i tried coordinating with zakaryan2004 and he said ofox had the same issue. However jens 3.2.3 did have that feature. I have been unable to replicate his success on this or the 2015 version. Best advice, download the rom normally, and update that way until i can track down a patch to implement.
Click to expand...
Click to collapse
You are right...Jenslody i think know solution since he make 3.2.3 that work for ota.. Not a big problem for me at all.. Just want you to know and don't know for others. Thank you for TWRP and for your help.
Bogdans29 said:
You are right...Jenslody i think know solution since he make 3.2.3 that work for ota.. Not a big problem for me at all.. Just want you to know and don't know for others. Thank you for TWRP and for your help.
Click to expand...
Click to collapse
Np. Not sure how much he talks, i'm wrapped up in pre-10 implementations and stuff (or at least trying to get the damn thing to work), but if you can get info on that, i'll push it to both the 2015 and 2016 builds and re-release with that update
Amazing to see official TWRP for our device! Thank you so much!
Sent from my j5xnlte using XDA Labs
palmbeach05 said:
Np. Not sure how much he talks, i'm wrapped up in pre-10 implementations and stuff (or at least trying to get the damn thing to work), but if you can get info on that, i'll push it to both the 2015 and 2016 builds and re-release with that update
Click to expand...
Click to collapse
I will try..
i asked for the issue on the twrp github.maybe they have a hint for fixing
J510H?
TWRP 3.3 has some flashing problems with some zips like the Camera fix for Pie just doesn't replace anything...
NecromancerViper said:
TWRP 3.3 has some flashing problems with some zips like the Camera fix for Pie just doesn't replace anything...
Click to expand...
Click to collapse
provide logs
Have you got any recovery for J510H? The version is not important but to be able to download android P&Q roms only
Bogdans29 said:
provide logs
Click to expand...
Click to collapse
+1
Zaid Koudmani said:
Have you got any recovery for J510H? The version is not important but to be able to download android P&Q roms only
Click to expand...
Click to collapse
I have some free time over the next few days to look into things. Can you tell me if there are any pie roms for the j510h? I'm not sure or can't exactly tell if that is supported?
There is Android 11 ROM for Xperia Tablet Z4.
It's quite stable.
Kernel sources.
Bugs:
- The same as LOS 18.1.
How to install:
1) use TWRP 3.5.0.
2) do factory reset (wipe)
3) Flash magisk 21. It's not necessary to flash gaaps as it is inbuilt in the ROM.
Change log:
20210127- initial build.
Last builds (mirror) are here.
Sabar_op link
We must be infinite grateful to sabar_op for his hard work in development of this rom and Bernie and Tarkzim who help to update kernel for kitakami devices. :good:.
Hey, just tried out this rom, but other then stated in the topic it is not the plus edition :-(
richyr45 said:
Hey, just tried out this rom, but other then stated in the topic it is not the plus edition :-(
Click to expand...
Click to collapse
I can build plus edition but only when I finish making ROMs for Android 6,7,8,10.
alex009988 said:
I can build plus edition but only when I finish making ROMs for Android 6,7,8,10.
Click to expand...
Click to collapse
This would be great!
Hope that BKB50's navigation keys would work on that plus build as it does on non-plus edition.
richyr45 said:
This would be great!
Click to expand...
Click to collapse
I think there is no need to hurry in building android 11 roms as Lineage 18 shoud become more stable for our device. Otherwise, I just clone the bugs to other android 11 roms.
Hello Alex,
can you provide a download link for TWRP 3.5.x for the Sony Xperia Z4 Tablet (SGP771)?
It seems that this tablet is not supprted officially by TWRP, and searching the Internet was without success yet.
Thanks in advance
klausstoertebeker said:
Hello Alex,
can you provide a download link for TWRP 3.5.x for the Sony Xperia Z4 Tablet (SGP771)?
It seems that this tablet is not supprted officially by TWRP, and searching the Internet was without success yet.
Thanks in advance
Click to expand...
Click to collapse
Everything in my cloud mirror. Take a look at twrp folder.
alex009988 said:
Everything in my cloud mirror. Take a look at twrp folder.
Click to expand...
Click to collapse
Thanks for help. I found and downloaded it - and it works
Edit: Just noticed this is the wrong thread for my question...
Is battery good enough? Its means not wasting too much while on sleep mode. Do it have a widevine L1 or still L3? Tks for developed Roms for this device, im very apprecited your support
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my build for the A310, A510, and A710,
most problems are already solved.
Here you can see how far everything is working for now.
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Wifi
USB
Video playback (HW/SW)
Tethering via USB
OTA-Updates
RIL
Mobile data
GPS
DRM
Tethering via WIFI and Bluetooth
much more...
Spoiler: Whats not working
Sensors
Audio server is crashing in a phone call for a5 and a7
Date usage because of missing eBPF
Spoiler: Links
TWRP a3xelte
TWRP a5xelte
TWRP a7xelte
ROM
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Spoiler: How to install it?
Instructions (for S3, simply use the files for your device)
XDA:DevDB Information
[ROM][13.x][a3xelte a5xelte a7xelte][ALPHA] LineageOS 20, ROM for the Samsung Galaxy A3, A5 and A7 ( A310, A510, and A710)
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 13.x T
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Thanks
danwood76 for the great work for these devices
The LineageOS team
And all others who have contributed to the Exynos projects past and present
Version Information
Status: Alpha
Created 2022-11-30
Last Updated 2022-11-30
I need testers to fix the sensors, please write me a PM.
I can't wait to try it on the A3 2016 phone, which I put on the shelf after buying a new phone. When will the HTML video come to the YouTube channel
yoooo great work!!!!!
i compiled TWRP 3.7.0-11.0 for A310F, anybody wanna test? it's still in a testing stage
Tried to upgrade a3 from 19 to 20. But stuck in twrp updating. Flashed IMG file too recovery partition. Then tried to reboot into recovery.
From that point I only see Samsung logo boot screen. Any long press button combo just vibrates and reboots that screen.
Any idea to debrick?
kurtn said:
Tried to upgrade a3 from 19 to 20. But stuck in twrp updating. Flashed IMG file too recovery partition. Then tried to reboot into recovery.
Click to expand...
Click to collapse
notnoelchannel said:
yoooo great work!!!!!
i compiled TWRP 3.7.0-11.0 for A310F, anybody wanna test? it's still in a testing stage
Click to expand...
Click to collapse
Did you try this one?
It should work to get into the download mode, try to press the button combination as long as needed,
it also could help to attach the usb charger to switch it off..
Then unplug it and give it another try to boot into the download mode and reflash a working TWRP.
html6405 said:
Did you try this one?
Click to expand...
Click to collapse
i didn't upload the twrp 3.7.0-11.0 anywhere, it's a private build. needs some fixes
kurtn said:
Tried to upgrade a3 from 19 to 20. But stuck in twrp updating.
Click to expand...
Click to collapse
can you attempt a clean install? if not, please try.
kurtn said:
Flashed IMG file too recovery partition. Then tried to reboot into recovery.
From that point I only see Samsung logo boot screen. Any long press button combo just vibrates and reboots that screen.
Click to expand...
Click to collapse
what recovery did you flash after twrp? LOS 20.0 recovery? if did, please reflash twrp 3.6.2 and attempt a clean install
notnoelchannel said:
i didn't upload the twrp 3.7.0-11.0 anywhere, it's a private build. needs some fixes
can you attempt a clean install? if not, please try.
what recovery did you flash after twrp? LOS 20.0 recovery? if did, please reflash twrp 3.6.2 and attempt a clean install
Click to expand...
Click to collapse
I cant do anything. I wait now for the battery to drain to shutdown.
I tried to install OP linked
Samsung Galaxy A3 2016 (Exynos)
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
kurtn said:
I cant do anything. I wait now for the battery to drain to shutdown.
I tried to install OP linked
Samsung Galaxy A3 2016 (Exynos)
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
Click to expand...
Click to collapse
Use vol down+home+power to force reboot, then try to install twrp 3.5.2
notnoelchannel said:
Use vol down+home+power to force reboot, then try to install twrp 3.5.2
Click to expand...
Click to collapse
Thank you. I made the mistake of releasing power button as soon as screen went dark.
So. Dirty upgrade worked. Signature spoofing not yet.
What sensors are to test?
Edit: all Sensors I tested work. Signature spoofing is only for system apps. Minmicrog CLI works.
How's performance? There's no way Android 13 is actually usable. How bad is performance with gapps?? This ****'s insane, once audio works I'll give this a shot. Keep up the good work!
HeladeraDragon said:
How's performance? There's no way Android 13 is actually usable. How bad is performance with gapps?? This ****'s insane, once audio works I'll give this a shot. Keep up the good work!
Click to expand...
Click to collapse
performance is the same like on android 12, i didn't test with gapps
Is it usable?
kurtn said:
So. Dirty upgrade worked. Signature spoofing not yet.
What sensors are to test?
Edit: all Sensors I tested work. Signature spoofing is only for system apps. Minmicrog CLI works.
Click to expand...
Click to collapse
Really? That's great, which version did you test?
The one in the main download folder or the one in the test folder?
Could someone test the a7 builds and report?
I've also created two builds, one with maybe not working sensors and another one in the test folder.
html6405 said:
Really? That's great, which version did you test?
The one in the main download folder or the one in the test folder?
Could someone test the a7 builds and report?
I've also created two builds, one with maybe not working sensors and another one in the test folder.
Click to expand...
Click to collapse
Normal build. It was like a week old when I installed it.
kurtn said:
Normal build. It was like a week old when I installed it.
Click to expand...
Click to collapse
Ok that's good to know,
could you also test the other build?
It could be that you will face a bootloop but idk.
But if you confirm that the normal build has working sensors, I'm already happy.
html6405 said:
Ok that's good to know,
could you also test the other build?
It could be that you will face a bootloop but idk.
But if you confirm that the normal build has working sensors, I'm already happy.
Click to expand...
Click to collapse
So they have identical file names? Only the test build is a few kilobytes larger.
No boot loop. Just stuck in boot animation for 10 minutes now. (Dirty flashed test over normal 20.0)
TheRain12 said:
I can't wait to try it on the A3 2016 phone, which I put on the shelf after buying a new phone. When will the HTML video come to the YouTube channel
Click to expand...
Click to collapse
Just tested: installation works without YouTube as well. Maybe better
kurtn said:
No boot loop. Just stuck in boot animation for 10 minutes now. (Dirty flashed test over normal 20.0)
Click to expand...
Click to collapse
Thanks, that's what I feared, but if you can confirm again, that really all sensors are working with the other build,
I'm happy.