Can anyone help ? i accidently bricked my tv box due to install something to change widevine from L3 to L1....now im stuck in recovery mode...
i tried apply update from sd card....but it pop message saying E:/footer is wrong and signature authentication failed....
and i tried flash from pc but my pc just wont detect my tv box...and lastly i even tried to burn a sd card rom...but it keep saying "L(1041)Check uboot file after read failed".
anything i can do right now ?
Update : successfully connect my TV box to PC but still no luck on flashing....it stuck on 1% Download DDR and gave me error "[0x10103003]Romcode/Initialize DDR/Download buffer/ USB transfer error"
Been there, done that.
Solution: Had to change PC (upgraded from X99 to X570) to "fix" this problem.
Used method:
"USB burning tool" with old usb drivers ( ther's only 2, one recent and one old, search ) Just press the Start button and then connect USB on the box with toothpick (release it after 4 seconds) and it should start flashing passing the 1% stress and the USB transfer error.
Good luck
i have a95x f3 air earlier this is working well but now this display is not showing on my sony tv sound comes but display not come tv box light and clock is showing on tv box but on tv screen no display comes what this solution if any there please help in this regards and also i want to update this is android 10 if its possible that suggest how can we upgrade the same i have a to a usb cable
BlackJackE3 said:
Can anyone help ? i accidently bricked my tv box due to install something to change widevine from L3 to L1....now im stuck in recovery mode...
i tried apply update from sd card....but it pop message saying E:/footer is wrong and signature authentication failed....
and i tried flash from pc but my pc just wont detect my tv box...and lastly i even tried to burn a sd card rom...but it keep saying "L(1041)Check uboot file after read failed".
anything i can do right now ?
Update : successfully connect my TV box to PC but still no luck on flashing....it stuck on 1% Download DDR and gave me error "[0x10103003]Romcode/Initialize DDR/Download buffer/ USB transfer error"
Click to expand...
Click to collapse
2 things.
1. The stock ROM.
I had to try so many stock roms online till I found one that would actually work on my F3Air.
I don't know why.
it seems that particular box has different processor and WiFi models.
It's easy to miss but I found out eventually that mine was a *S905X3* with Mediatek WiFi chip.
Apparently so many ROMs are for S905 and S905X2 versions of the same box.
Rarely do you find a download link that specifies with processor version by the way......
2.
Untick 'Erase Bootloader' in the USB tool. It would never work when that is ticked.
You will have to use the USB tool BTW. No other way worked for me.
Hi @4llerbuntu
what Android version you have now on your F3 Air box?
rmghrr said:
Hi @4llerbuntu
what Android version you have now on your F3 Air box?
Click to expand...
Click to collapse
DEAR
MY H95X F3 IS FLICKERING ISSUES AND SOME TV IS NOT DETECTING
AND I USED THE ANDROID VERSION OF 9
THIS TYPE OF ISSUE YOUTUBE LINK
Have you tried Factory reset?
Is the issue specific to your TV set alone or happens with other TV sets.
I have different version though ( A95x F3 Air RGB )
rmghrr said:
Have you tried Factory reset?
Is the issue specific to your TV set alone or happens with other TV sets.
I have different version though ( A95x F3 Air RGB )
Click to expand...
Click to collapse
DEAR I HAVE DONE FACTORY RESET MANY TIMES BUT PROBLEM NOT RESOLVED
AND ALSO I CHANGED WITH ANOTHER TV BUT SAME PROBLME SHOWING
I HAVE ALSO A95X F3 AIR RGB MODEL
IF YOU HAVE ANY SOLUTION THAN KINDLY PROVIDE ME
4llerbuntu said:
2 coisas.
1. O estoque ROM.
Tive de experimentar tantas ROMs online até encontrar uma que realmente funcionasse no meu F3Air.
Não sei por quê.
parece que essa caixa em particular tem diferentes configurados e modelos de WiFi.
É fácil perder, mas acabei descobrindo que minha era um * S905X3 * com chip WiFi Mediatek.
Aparentemente, tantos ROMs são para as versões S905 e S905X2 da mesma caixa.
A propósito, você encontra um link de download que especifica a versão do processador ......
2
Desmarque 'Erase Bootloader' na ferramenta USB. Nunca funcionaria quando isso fosse selecionado.
Você terá que usar uma ferramenta USB BTW. Nenhuma outra maneira funcionou para mim.
Click to expand...
Click to collapse
I have the same problem. I've tried several roms but none of the wifi works in my box. Could you give me the download link for the rom you used?
neomello12 said:
I have the same problem. I've tried several roms but none of the wifi works in my box. Could you give me the download link for the rom you used?
Click to expand...
Click to collapse
http://geekbuying.mediafire.com/file/jhvyx6gth45vgxu/A95X_F3_AIR_20191024senk.img/file
Aidans Custom ROM. Pure ATV, no root. https://drive.google.com/file/d/1yxFWIgO7FYSg0XCnUPcPb-k9MppO08Bh/view?usp=sharing
rmghrr said:
Hi @4llerbuntu
what Android version you have now on your F3 Air box?
Click to expand...
Click to collapse
Android 9.
http://geekbuying.mediafire.com/file/jhvyx6gth45vgxu/A95X_F3_AIR_20191024senk.img/file stock rom
then i switched to Aidans Rom. Pure ATV, not rooted.
https://drive.google.com/file/d/1yxFWIgO7FYSg0XCnUPcPb-k9MppO08Bh/view?usp=sharing
4llerbuntu said:
2 things.
1. The stock ROM.
I had to try so many stock roms online till I found one that would actually work on my F3Air.
I don't know why.
it seems that particular box has different processor and WiFi models.
It's easy to miss but I found out eventually that mine was a *S905X3* with Mediatek WiFi chip.
Apparently so many ROMs are for S905 and S905X2 versions of the same box.
Rarely do you find a download link that specifies with processor version by the way......
2.
Untick 'Erase Bootloader' in the USB tool. It would never work when that is ticked.
You will have to use the USB tool BTW. No other way worked for me.
Click to expand...
Click to collapse
Worked for me thanks
It is possible to just re-image using an sd card.
Use Burn card maker to create the bootable sdcard from the stock img.
The trick here is you need to open the sd card from PC before using it on tv box and edit the ini file.
There there is an option for erase bootloader set to 1. Just delete 1, and type 2, then save the file.
Then the sd card is bootable and firmware will boot and install fine.
I had to try again and again with an SD card as I had no usb A to usb A cable. Someone posted here we need to have erase bootloader disabled when using the USB tool.
Guess what, same applies for sd card method
markspace said:
It is possible to just re-image using an sd card.
Use Burn card maker to create the bootable sdcard from the stock img.
The trick here is you need to open the sd card from PC before using it on tv box and edit the ini file.
There there is an option for erase bootloader set to 1. Just delete 1, and type 2, then save the file.
Then the sd card is bootable and firmware will boot and install fine.
I had to try again and again with an SD card as I had no usb A to usb A cable. Someone posted here we need to have erase bootloader disabled when using the USB tool.
Guess what, same applies for sd card method
Click to expand...
Click to collapse
how do i deactivate it[erase bootloader disabled when using the USB tool]since this procedure is by sd not by cable
4llerbuntu said:
2 coisas.
1. A ROM de estoque.
Eu tive que experimentar tantas roms de estoque online até encontrar uma que realmente funcionasse no meu F3Air.
Eu não sei por quê.
parece que essa caixa em particular possui diferentes modelos de processador e WiFi.
É fácil não perceber, mas acabei descobrindo que o meu era um *S905X3* com chip Mediatek WiFi.
Aparentemente, muitas ROMs são para as versões S905 e S905X2 da mesma caixa.
Raramente você encontra um link de download que especifica com a versão do processador a propósito......
2.
Desmarque 'Apagar Bootloader' na ferramenta USB. Nunca funcionaria quando isso está marcado.
Você terá que usar a ferramenta USB BTW. Nenhuma outra maneira funcionou para mim
Click to expand...
Click to collapse
E In my box the wifi is not working, how can I solve this problem
hi everyone. I have a hiremco nitro x3+ based on a95x f3. I tried to unroot but something went wrong. I tried to boot but stuck on android screen. Then, I tried to hard reset, turned it on it in recovery mode but box doesn't respond to remote. do you have any idea what to do?
Dionisus said:
....but box doesn't respond to remote...
Click to expand...
Click to collapse
Attach USB keyboard.
Any one tried the latest Slimbox sbx_a95x_f3_air_aosp_9_4.7z?
I installed it in F3 Air box and enabled root, so far every thing is good.
I am wondering how I can get Widewine L1 ?
There is one small problem though, some apps like "TATA PLAY" even when root is not enabled still recognize box as rooted and refusing to run.
Related
yesterday i rooted my motorola fire xt311 2.3.5 via super one click and all the sudden "3g mobile hotspot" usb tethering stopped working i installed many 3rd party software like moto tether etc etc but only "easytether" worked , then i came to know it has blocked all secure sites like FB,play ETC ETC :'(
i tried unrooting still cant get usb tethering working directly from my device....
any suggestion ??
Use wifi tethering.. check out my signature
Si usted le da sentido a continuación, obtener el respeto .. Mi mente joven que
thanks for reply but it needs
"Requirements:-
1.Rooted Phone
2.Wifi enabled Laptop or PC
3.Root explorer or any other application which gives system access
4.File in the attachement "
i have non of the above
flash your stock f/w with data wipe...it will be as good as new...and things will work as intended
elaborate pls :|
install any stock firmware of your device with a data wipe .........this will fix it.........if you want flashing of firmware instructions refer your device specific thread sir......
Hello,
I hope someone can help me with my Bluebo B3000 (MTK6575 processor) of which I disabled the Android 4.0 software. What happened is that I tried to root the phone with the help of Gonzalox post in this thread and with the MTKdroidTools program. I didn't succeed. I tried to root the phone after returning it to the factory settings, but I still didn't succeed. And I believe it is then that I made my big mistake. I decided to use a universal rooting program, namely Root_with_Restore_by_Bin4ry_v18. This program has two options (normal and special) for rooting. I tried both, but they didn't work.
Afterwards I found that some apps didn't work correctly anymore so I decided to reset the phone to the factory settings. It never got past the screen on which the picture of the android “mascot” has a loading bar through its head. The loading never starts and the phone simply freezes except for the “electron cloud”, or how one would call it, in the stomach of the android “mascot” that keeps on turning and turning. Also my laptop doesn't recognize the phone anymore. Oh, and I have tried to put it in recovery mode.
Questions:
1 Does anybody know how I can get passed the android mascot screen?
2 If not, how can I repair my android system, or replace it with a new one?
And the general sub-question; how can I make my laptop recognize my Bluebo b3000 again?
Thanx,
Felis Serval
Bluebo B3000 flash firmware: which software, which zip files, where to download?
Some links I found. Might be of interest?
http://www.askmefast.com/Why_wont_mt_bluebo_android_b3000_turn_on-qna5097404.html#q2451003
Copy Paste:
"This is what happens when the Android rom gets corrupted. The only option you have is to reflash the device with a clean firmware. Thankfully the SD card slot allows you to easily reflash the firmware. Instructions on how to do this can be found at the always helpful XDA forums - http://forum.xda-developers.com/showthread.php?t=1562130. source: I rooted my nook color into an android tablet and now my android wont turn on all the way. it keeps on going to the android man and blue swirly thingy?
Read more: Why wont mt bluebo android b3000 turn on? - My Bluebo Android B3000 won`t turn on. All it does is show a large fully charged green battery that takes up the entire screen for about 3 secs and the screen goes black again :: Ask Me Fast at http://www.askmefast.com/Why_wont_mt_bluebo_android_b3000_turn_on-qna5097404.html#q2451003"
Copy-Paste from that page:
"It sounds like the stock Android software could be corrupted. There a few things you should try first. If there is a reset button on your tablet, try using this to see if it helps. You could also try holding down the power button for 30 seconds to see if it gets it out of the boot loop. If these don`t work you will most likely have to reflash the firmware onto your tablet. This isn`t too hard to do. You can download the uberdroid program and run it from an sd card. The official uberdroid site is here - http://techknow.freeforums.org. It`s likely that this will solve your problem. If it was a hardware problem, it`s unusual that the tablet would still boot. source: Brand new google android tablet when l turn on it gets on android blank page with android loading?
Read more: I rooted my nook color into an android tablet and now my android wont turn on all the way. it keeps on going to the android man and blue swirly thingy - My ROOTED android nook color wont turn on all the way. its been like this for 5 6 days. HELP!!!! :: Ask Me Fast at http://www.askmefast.com/I_rooted_m...d_blue_swirly_thingy-qna3679601.html#q2442531 "
From that link, the following copy paste:
"Hi there, it means sir that you are currently experiencing the boot loop problem, yes you need to forcely HAR reset/DEFAULT FACTORY SETTINGS may i know the model of your tablet so that i can specify with my answer on how you will boot up in the recovery mode in order for you to reset it ..thanks and good luck 3 RESET WAYS on ANDROID TABLETS REVIEW. source: I have an android tablet when i turn it on all i get is the android man on the screen and in the bottom corner android os 2.2, kernlt 2.6.32, v1.5.1?
Read more: I rooted my nook color into an android tablet and now my android wont turn on all the way. it keeps on going to the android man and blue swirly thingy - My ROOTED android nook color wont turn on all the way. its been like this for 5 6 days. HELP!!!! :: Ask Me Fast at http://www.askmefast.com/I_rooted_m...d_blue_swirly_thingy-qna3679601.html#q2442531 "
And also:
"Your Android firmware (the Android Operating System which is intalled on your device) is corrupted. You will need to re-flash a clean firmware to your device. How you go about doing this will depend on the type of tablet you have. A quick answer could be found by googling the name of your tab with "re flash firmware unbrick". XDA developers are a good resource for issues like this. source: When i start open my android 2.2 tablet ,all i can see is the android man only! whats happening to my android?
Read more: I rooted my nook color into an android tablet and now my android wont turn on all the way. it keeps on going to the android man and blue swirly thingy - My ROOTED android nook color wont turn on all the way. its been like this for 5 6 days. HELP!!!! :: Ask Me Fast at http://www.askmefast.com/I_rooted_m...d_blue_swirly_thingy-qna3679601.html#q2442531 "
User Tomerk (http://forum.xda-developers.com/showthread.php?t=2115921) knows which software to use for flashing your phone. Also he knows which zip files to use. Unfortunately he does not mention these by name nor link :s But (s)he does mention FlashTool. I could find the following website: http://androxyde.github.com/ .
Copy paste from their site:
"Introduction to Flashtool
Flashtool is a flashing software that can be used to :
Flash original Images (Android 1.6, 2.1, 2.3 Images)
Root your phone
Install Recovery, Busybox, custom kernels
Clean your Rom (remove /system/apps apps of your choice) (Be careful, unless you really know what you do, do not modify the default list. This can make your phone stuck at the SE Logo)
Clear dalvik cache
Optimize (install of JIT v2) (Disabled in 0.4, will readd it as a plugin for 2.1 phones only)
Customize (installs apps found in the custom/apps folder of the flashtool)
Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
Edit any text file on the device
Rebrand your device"
Also I could find this FlashTool, from XDA: http://forum.xda-developers.com/showthread.php?t=920746 . ANY XDA-MEMBERS THAT CAN EXPLAIN IF THIS WOULD SUITE YOUR PHONE??? For I cannot help you with this :/
Google searches used:
--> B3000 android download flash
--> download FlashTool Bluebo
Good luck, repost and...
Peace!
Devvie
~~~ [email protected] ~~~
Cuisvis hominis est errare, nullius nisi insipientis in errore persevare
——
All spelling mistakes are my own and may only be distributed under the GNU General Public License! – (© 95-1 by Coredump; 2-013 by DevNullius)
It starts, but doesn't respond to any touching!
Thanks to Devnulius for your reply.
Reading your reply it became clear to me that I had to reflash the phone. The phone is not that common, but its processor (MTK6575) is. Searching with Google I found this website,MT657x flashing tutorial. I found a SP Flash Tool here http://www.filecrop.com/sp-flash-tool.html. I can't remember where I found the Scatter-loading file, but I found it using Google. I followed the instructions on MT657x flashing tutorial and was able to reflash the phone. The only hard thing was that I had to connect and disconnect the phone I few times before the computer had the right driver for the computer port. I already had the drivers.
Now, a new problem has risen. The phone starts up normal and the phone loads the start screen normally. Also, I can go into factory and recovery mode. However the touchscreen is frozen. It doesn't respond to any gesture. The normal buttons (on/off switch and the two volume buttons) work normally. I've tested the touchscreen in factory mode, but to no avail. The screen will not respond.
Earlier I had asked Tomerk to send me his zip file of the Bluebo's rom. Which he did. Just as pe1fam was, as he says in this thread, I'm now able to install a Zip file in Recovery mode. I tried this with the zip file I got from Tomerk, but it didn't work. The phone aborted installation. But off course I still have the zip file.
I tried flashing the phone two more times, but the touchscreen simply won't work. The IMEI code is correct.
Does anybody have an idea on how I can make the touchscreen work again?
Thank You
Felis Serval
...
I'm trying to find an official download site for stock firmware, but cannot find it??
http://www.bing.com/search?q=Bluebo+B3000+forum+download+stock+firmware
baidu.com: bluebo b3000 stock firmware download link here
baidu.com: bluebo b3000 .zip
Also, no mirrors... So I'm really curious... Some advertisements mention "official stock software" to be delivered with your phone... Did you receive this? Also, where do the other users get their .zip stock firmwares??
sorry
devnullius
---------- Post added at 08:44 PM ---------- Previous post was at 08:27 PM ----------
http://forum.xda-developers.com/showthread.php?t=2046705
28th December 2012, 12:10 PM #4
Junior Member - OP
Thanks Meter 1
Posts: 10
Join Date: Nov 2012
rom for B3000
Quote:
Originally Posted by pe1fam
I see you have flashed your rom. My B3000 stopped working suddenly and only shows and android screen.
Dutch telephone shop told me that a newly flashed rom would probably solve the problem.
However I cannot find a suitable rom (they did not have it to).
The phone comes in recovery and can install a zip, so that is what I'm looking for.
Can you tell me where I can find a suitable rom (or I have to return the phone to China).
regards Han
yes I have flashed a rom. I don't remember where I downloaded it from, I can search if you want. Anyway I have the files on my pc. drop me an email to [email protected] if you want to contact directly.
My bluebo works again!
In the end the solution was simple. After re-flashing the phone, as was posted before, the touchscreen did not respond anymore. The solution to this problem was re-flashing the phone again but now using the boot.img and recovery.img that were stored in the clockworkmod folder of my phones SD card. On the folder with rom software for the Bluebo that I had obtained earlier, see above, both image files already existed. I replaced these with the files that I found in my clockworkmod folder, re-flashed the phone using the rom software, and voila the phone was again in working order.
Thanks DevNulius for your help!
I asked Felis for his binaries and I uploaded them here:
https://www.box.com/s/1ht7xbu196120dgxdy6n
Peace!
devnullius
b3000 destravar o celular
Meu b3000 estava com o teclado ruim e tentei fazer o backup e ele travou a tela como faço para meu celular voltar ao normal
por favor mim ajudem
Same issues but unsolved problems
Felis Serval said:
In the end the solution was simple. After re-flashing the phone, as was posted before, the touchscreen did not respond anymore. The solution to this problem was re-flashing the phone again but now using the boot.img and recovery.img that were stored in the clockworkmod folder of my phones SD card. On the folder with rom software for the Bluebo that I had obtained earlier, see above, both image files already existed. I replaced these with the files that I found in my clockworkmod folder, re-flashed the phone using the rom software, and voila the phone was again in working order.
Thanks DevNulius for your help!
Click to expand...
Click to collapse
devnullius said:
I asked Felis for his binaries and I uploaded them here:
Peace!
devnullius
Click to expand...
Click to collapse
Hello, I Think I have the exactly the same phone as you and I messed up while trying to root with SP flash tool and disconnected during the process.
Right now i have the same simptoms as you like the frezzed ANDROID screen at boot (and no conclusion of it).
I have already dowloaded the driver and tools, but now when I connect the phone it apears at device manager just while one second and disapear.
So I found this tutorial and helped a lot teaching how to use SPflash tool:
"How To use SP Flash Tool For China Mobile Phones - HDC Legend S4 [HD]" (I cant post links yet)
The flashing process is a bit different on the video, the blueboo (on my case) only can be flashed with the battery.
I have sucessfully restored a rom with the flashing process, but now I am with the same problem as Felis Serval few posts before now.
rildo22 said:
Meu b3000 estava com o teclado ruim e tentei fazer o backup e ele travou a tela como faço para meu celular voltar ao normal
por favor mim ajudem
Click to expand...
Click to collapse
(this brazilian guy "este chapa" its saying the touch is freezzed as me)
But I don't know how to find a proper clockworkmod to use and replace boot.img and recovery.img, I already made a clockworkmod update from a zip file on the SDcard, but the touchscreen stills don't working.
At the recovery mode I can test the buttons and are diplayed the code of every button when pressed.
A funny thing is the touch are recognized as a button too (the same code appears on every click at the screen). I don't Know if it is normal.
Unfortunately after boot and at the home screen I can not unlock because the touch dont work
POST resume in portuguese:
Depois de Flashear com os arquivos do Box do Felis Serval o Celular voltou a funcionar, porem o touch nao. Assim não consigo desbloquear a tela inicial.
Pelo Modo recovery consigo testar os botoes, no momento que é pressionado é mostrado o código, incluindo quando toco na tela (tambem é reconhecido como um botão e mostra sempre o mesmo código, não sei se isto é normal).
Hi guys.
I own this "Notebook"
Hardware is a Quad Rk3188 an OS is Android 4.2.2
my problem is that the generic root method for RK3188 does nothing else but prints one error msg after an other.
I have the sources for the tab, but i don't exactly know where to start looking for exploits or backdors.
Any Help would be appreciated.
Can't help rooting your device, haven't rooted any of my Android devices before and will probably not root my A10 ether.
But me too got this "Android Notebook" and glad to see some one else having it.
Of all apps at App Store was there only one app that wasn't compatibel whit the Lenovo A10. A broadband speed measuring app. That I can live without.
Using mine A10 for wordprocessing, mostly.
Yeah I've tried several exploits and rooting methods by now and none of them was working.. i couldn't even get Fastboot working, so i can't try booting into CWM -.- ... but the device is working really good so I'm not that unhappy
Blåburk said:
Can't help rooting your device, haven't rooted any of my Android devices before and will probably not root my A10 ether.
But me too got this "Android Notebook" and glad to see some one else having it.
Of all apps at App Store was there only one app that wasn't compatibel whit the Lenovo A10. A broadband speed measuring app. That I can live without.
Using mine A10 for wordprocessing, mostly.
Click to expand...
Click to collapse
I succeeded with the kingo android root app.
Confirmed
Thanks pal .. exactly this thing did it for me .. now i can use rooted A10 .. ... and so it begins
loskarlitos said:
I succeeded with the kingo android root app.
Click to expand...
Click to collapse
Bonjour, j'ai essayé de rooter mon appareil avec Kingo mais je rencontre quelques problèmes. Kingo indique "no device connected" alors que mon appareil est bien connecté à mon ordinateur. Windows n'arrive pas à installer le driver de mon appareil. Voici ce que j'ai dans mon gestionnaire de périphérique. J'ai essayé de mettre à jour le pilote, sans succès.
Hello, I tried to root my Ideapas A10 with Kingo but I am having some problems. Kingo says "no device connected" while my device is connected to my computer. Windows can not install the driver for my device. Here is what I have in my device manager:
www*noelshack*com/2014-03-1389700608-a10problem.png (I just signed up, so I do not have the right to post links, but here's a screenshot. replace "*" with ".")
I tried to update the driver without success. Thank you for your help and sorry for my bad English.
Titouskylive said:
Bonjour, j'ai essayé de rooter mon appareil avec Kingo mais je rencontre quelques problèmes. Kingo indique "no device connected" alors que mon appareil est bien connecté à mon ordinateur. Windows n'arrive pas à installer le driver de mon appareil. Voici ce que j'ai dans mon gestionnaire de périphérique. J'ai essayé de mettre à jour le pilote, sans succès.
Hello, I tried to root my Ideapas A10 with Kingo but I am having some problems. Kingo says "no device connected" while my device is connected to my computer. Windows can not install the driver for my device. Here is what I have in my device manager:
www*noelshack*com/2014-03-1389700608-a10problem.png (I just signed up, so I do not have the right to post links, but here's a screenshot. replace "*" with ".")
I tried to update the driver without success. Thank you for your help and sorry for my bad English.
Click to expand...
Click to collapse
i had the same issue .. switching ADB-Debug mode off and on again helped me out.. (you sure have Debug Mode enabled?)
hell_fire79 said:
i had the same issue .. switching ADB-Debug mode off and on again helped me out.. (you sure have Debug Mode enabled?)
Click to expand...
Click to collapse
Yes my debug mode is enabled . I tried to switch it off and on but it doesn't work. Thank you for your help.
Great to see it's been successfully rooted.
Can you get the LinuxOnAndroid app to work? Some apps such as Gimp and LibreOffice don't really have equivalents for power users in Android.
If we can get it to work, it's the best of both worlds
JLIT99 said:
Great to see it's been successfully rooted.
Can you get the LinuxOnAndroid app to work? Some apps such as Gimp and LibreOffice don't really have equivalents for power users in Android.
If we can get it to work, it's the best of both worlds
Click to expand...
Click to collapse
Haven't tried yet .. also i don't know if the default kernel supports loops devices which are needed for linux on android ... i will test the next few days and post my experiences.
Lenovo Ideapad A10 Kingo Root
Hi, how did you manage to root A10 with Kingo?
I have a problem that Kingo cannot connect to my "notebook"
After I connect via USB it shows connecting... and after several tries it stops with "No device connected" in the application status bar.
I have USB debugging mode turned on. I've also tried to disable and enable it few times. Still no connection.
I use Windows 8.1 64bit but also tried to connect from WIndows 7 64bit - no connection
I have Android 4.2.2 installed on my Lenovo Ideapad A10 with latest updates (build JDQ39.A10_S020_131203).
Any advices?
-----------------
Mix
Do you have your drivers installed properly? .. esp. can you connect using ADB? (try this one First) .. next try disabling USB Storage - Mode.
mix2ra said:
Hi, how did you manage to root A10 with Kingo?
I have a problem that Kingo cannot connect to my "notebook"
After I connect via USB it shows connecting... and after several tries it stops with "No device connected" in the application status bar.
I have USB debugging mode turned on. I've also tried to disable and enable it few times. Still no connection.
I use Windows 8.1 64bit but also tried to connect from WIndows 7 64bit - no connection
I have Android 4.2.2 installed on my Lenovo Ideapad A10 with latest updates (build JDQ39.A10_S020_131203).
Any advices?
-----------------
Mix
Click to expand...
Click to collapse
No drivers
I bought an ideapad a10 but the drivers are not included in the box. When i try to connect via pc (win8.1) and enable adb i noticed that the drivers are not installed in my pc thats why i cant connect to kingoapp. Can someone give me a link of this driver. Thanks.
Try the Lenovo homepage and download the sources for the tablet, there is a flashtool included and besides that are the drivers .. maybe you have to install these manually ..
jobmasterlester said:
I bought an ideapad a10 but the drivers are not included in the box. When i try to connect via pc (win8.1) and enable adb i noticed that the drivers are not installed in my pc thats why i cant connect to kingoapp. Can someone give me a link of this driver. Thanks.
Click to expand...
Click to collapse
hell_fire79 said:
Try the Lenovo homepage and download the sources for the tablet, there is a flashtool included and besides that are the drivers .. maybe you have to install these manually ..
Click to expand...
Click to collapse
There is no download sources for ideapad a10. I checked every single link in the site and then i ended up nothing.. I also search in google but it only takes me to manuals and user guides.
of there is
http://download.lenovo.com/consumer/open_source_code/a10_open_source.tar.gz
jobmasterlester said:
There is no download sources for ideapad a10. I checked every single link in the site and then i ended up nothing.. I also search in google but it only takes me to manuals and user guides.
Click to expand...
Click to collapse
hell_fire79 said:
of there is
http://download.lenovo.com/consumer/open_source_code/a10_open_source.tar.gz
Click to expand...
Click to collapse
Thanks. Downloading.
jobmasterlester said:
Thanks. Downloading.
Click to expand...
Click to collapse
Hy guys! I can' find where is a flashtool.... thanks
when you've downloaded the source files tar.gz, extract this archive. (use 7zip or winrar to extract)
you'll find the drivers in A10_Open_Source_20130827\kernel\rktools\RK3188DevelopTool\rockusb.zip
these should work, since they are shipped with the sources
defffos said:
Hy guys! I can' find where is a flashtool.... thanks
Click to expand...
Click to collapse
hell_fire79 said:
when you've downloaded the source files tar.gz, extract this archive. (use 7zip or winrar to extract)
you'll find the drivers in A10_Open_Source_20130827\kernel\rktools\RK3188DevelopTool\rockusb.zip
these should work, since they are shipped with the sources
Click to expand...
Click to collapse
ok I found them! but how do I make them install? I have windows vista and if I update driver and I select the folder where the driver always tells me impossible ... thanks
Hi,
I'm not sure if I'm in the right place but here goes. I bought a Umidigi Crystal ( 4gb 64gb) . I plugged in charger to enable an OTA update, however I didn't switch the charger on (dummy) left the phone to do its stuff but when I came back to it, it was completely dead. I downloaded SP flash tools and the correct stock rom from Umidigi support. hoping to re flash it. However my problem is that the phone is not holding connection to the laptop. it chimes (accepts handshake), but within seconds drops the connection. Consequently SP flash tools can't flash the rom. It just shows red bar for download but won't push the rom. I have also installed all MTK drivers and turned off driver signing . Any help/advice would be much appreciated, and thanks in advance..:fingers-crossed::fingers-crossed::fingers-crossed:
baterio sub la minimuma nivelo. Aĉetu rapidan ŝargilon (2.4A).
se ĝi ne funkcias, vi devos malfermi la telefonon kaj ŝargi la baterion direkte al universala lito-ŝargilo. Tio estas tre bonega: amazon.it/dp/B00LWZHQO0/ref=psdc_473397031_t1_B00B73DRYA
help please I ask you to install twrp on my 5450n and it does not enter the system every time I give it restart in twrp it sends me again to twrp and if I give it restart in recovery mode it sends me to the original recovery but it does not enter the phone
Hi, is that LG or Prestigio phone ? did you tried to flash stock and then new twrp.img for your device ?
gracias por responder es un alcatel onetouch fierce xl 5054n la verdad no encuentro que hacer
Maybe this can help you
https://forum.xda-developers.com/android/help/alcatel-onetouch-fierce-xl-root-twrp-t3517748
that was just what I did and I hurt the phone really I need help:llorando::llorando::llorando:
hoskar2008 said:
that was just what I did and I hurt the phone really I need help:llorando::llorando::llorando:
Click to expand...
Click to collapse
Try this : do little bit research .
https://androidforums.com/threads/unbrick-restore-5045n-back-to-stock-rom.1035264/