Related
Hello,
I hope someone can help me with my Bluebo B3000 (MTK6575 processor) of which I disabled the Android 4.0 software. What happened is that I tried to root the phone with the help of Gonzalox post in this thread and with the MTKdroidTools program. I didn't succeed. I tried to root the phone after returning it to the factory settings, but I still didn't succeed. And I believe it is then that I made my big mistake. I decided to use a universal rooting program, namely Root_with_Restore_by_Bin4ry_v18. This program has two options (normal and special) for rooting. I tried both, but they didn't work.
Afterwards I found that some apps didn't work correctly anymore so I decided to reset the phone to the factory settings. It never got past the screen on which the picture of the android “mascot” has a loading bar through its head. The loading never starts and the phone simply freezes except for the “electron cloud”, or how one would call it, in the stomach of the android “mascot” that keeps on turning and turning. Also my laptop doesn't recognize the phone anymore. Oh, and I have tried to put it in recovery mode.
Questions:
1 Does anybody know how I can get passed the android mascot screen?
2 If not, how can I repair my android system, or replace it with a new one?
And the general sub-question; how can I make my laptop recognize my Bluebo b3000 again?
Thanx,
Felis Serval
Bluebo B3000 flash firmware: which software, which zip files, where to download?
Some links I found. Might be of interest?
http://www.askmefast.com/Why_wont_mt_bluebo_android_b3000_turn_on-qna5097404.html#q2451003
Copy Paste:
"This is what happens when the Android rom gets corrupted. The only option you have is to reflash the device with a clean firmware. Thankfully the SD card slot allows you to easily reflash the firmware. Instructions on how to do this can be found at the always helpful XDA forums - http://forum.xda-developers.com/showthread.php?t=1562130. source: I rooted my nook color into an android tablet and now my android wont turn on all the way. it keeps on going to the android man and blue swirly thingy?
Read more: Why wont mt bluebo android b3000 turn on? - My Bluebo Android B3000 won`t turn on. All it does is show a large fully charged green battery that takes up the entire screen for about 3 secs and the screen goes black again :: Ask Me Fast at http://www.askmefast.com/Why_wont_mt_bluebo_android_b3000_turn_on-qna5097404.html#q2451003"
Copy-Paste from that page:
"It sounds like the stock Android software could be corrupted. There a few things you should try first. If there is a reset button on your tablet, try using this to see if it helps. You could also try holding down the power button for 30 seconds to see if it gets it out of the boot loop. If these don`t work you will most likely have to reflash the firmware onto your tablet. This isn`t too hard to do. You can download the uberdroid program and run it from an sd card. The official uberdroid site is here - http://techknow.freeforums.org. It`s likely that this will solve your problem. If it was a hardware problem, it`s unusual that the tablet would still boot. source: Brand new google android tablet when l turn on it gets on android blank page with android loading?
Read more: I rooted my nook color into an android tablet and now my android wont turn on all the way. it keeps on going to the android man and blue swirly thingy - My ROOTED android nook color wont turn on all the way. its been like this for 5 6 days. HELP!!!! :: Ask Me Fast at http://www.askmefast.com/I_rooted_m...d_blue_swirly_thingy-qna3679601.html#q2442531 "
From that link, the following copy paste:
"Hi there, it means sir that you are currently experiencing the boot loop problem, yes you need to forcely HAR reset/DEFAULT FACTORY SETTINGS may i know the model of your tablet so that i can specify with my answer on how you will boot up in the recovery mode in order for you to reset it ..thanks and good luck 3 RESET WAYS on ANDROID TABLETS REVIEW. source: I have an android tablet when i turn it on all i get is the android man on the screen and in the bottom corner android os 2.2, kernlt 2.6.32, v1.5.1?
Read more: I rooted my nook color into an android tablet and now my android wont turn on all the way. it keeps on going to the android man and blue swirly thingy - My ROOTED android nook color wont turn on all the way. its been like this for 5 6 days. HELP!!!! :: Ask Me Fast at http://www.askmefast.com/I_rooted_m...d_blue_swirly_thingy-qna3679601.html#q2442531 "
And also:
"Your Android firmware (the Android Operating System which is intalled on your device) is corrupted. You will need to re-flash a clean firmware to your device. How you go about doing this will depend on the type of tablet you have. A quick answer could be found by googling the name of your tab with "re flash firmware unbrick". XDA developers are a good resource for issues like this. source: When i start open my android 2.2 tablet ,all i can see is the android man only! whats happening to my android?
Read more: I rooted my nook color into an android tablet and now my android wont turn on all the way. it keeps on going to the android man and blue swirly thingy - My ROOTED android nook color wont turn on all the way. its been like this for 5 6 days. HELP!!!! :: Ask Me Fast at http://www.askmefast.com/I_rooted_m...d_blue_swirly_thingy-qna3679601.html#q2442531 "
User Tomerk (http://forum.xda-developers.com/showthread.php?t=2115921) knows which software to use for flashing your phone. Also he knows which zip files to use. Unfortunately he does not mention these by name nor link :s But (s)he does mention FlashTool. I could find the following website: http://androxyde.github.com/ .
Copy paste from their site:
"Introduction to Flashtool
Flashtool is a flashing software that can be used to :
Flash original Images (Android 1.6, 2.1, 2.3 Images)
Root your phone
Install Recovery, Busybox, custom kernels
Clean your Rom (remove /system/apps apps of your choice) (Be careful, unless you really know what you do, do not modify the default list. This can make your phone stuck at the SE Logo)
Clear dalvik cache
Optimize (install of JIT v2) (Disabled in 0.4, will readd it as a plugin for 2.1 phones only)
Customize (installs apps found in the custom/apps folder of the flashtool)
Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
Edit any text file on the device
Rebrand your device"
Also I could find this FlashTool, from XDA: http://forum.xda-developers.com/showthread.php?t=920746 . ANY XDA-MEMBERS THAT CAN EXPLAIN IF THIS WOULD SUITE YOUR PHONE??? For I cannot help you with this :/
Google searches used:
--> B3000 android download flash
--> download FlashTool Bluebo
Good luck, repost and...
Peace!
Devvie
~~~ [email protected] ~~~
Cuisvis hominis est errare, nullius nisi insipientis in errore persevare
——
All spelling mistakes are my own and may only be distributed under the GNU General Public License! – (© 95-1 by Coredump; 2-013 by DevNullius)
It starts, but doesn't respond to any touching!
Thanks to Devnulius for your reply.
Reading your reply it became clear to me that I had to reflash the phone. The phone is not that common, but its processor (MTK6575) is. Searching with Google I found this website,MT657x flashing tutorial. I found a SP Flash Tool here http://www.filecrop.com/sp-flash-tool.html. I can't remember where I found the Scatter-loading file, but I found it using Google. I followed the instructions on MT657x flashing tutorial and was able to reflash the phone. The only hard thing was that I had to connect and disconnect the phone I few times before the computer had the right driver for the computer port. I already had the drivers.
Now, a new problem has risen. The phone starts up normal and the phone loads the start screen normally. Also, I can go into factory and recovery mode. However the touchscreen is frozen. It doesn't respond to any gesture. The normal buttons (on/off switch and the two volume buttons) work normally. I've tested the touchscreen in factory mode, but to no avail. The screen will not respond.
Earlier I had asked Tomerk to send me his zip file of the Bluebo's rom. Which he did. Just as pe1fam was, as he says in this thread, I'm now able to install a Zip file in Recovery mode. I tried this with the zip file I got from Tomerk, but it didn't work. The phone aborted installation. But off course I still have the zip file.
I tried flashing the phone two more times, but the touchscreen simply won't work. The IMEI code is correct.
Does anybody have an idea on how I can make the touchscreen work again?
Thank You
Felis Serval
...
I'm trying to find an official download site for stock firmware, but cannot find it??
http://www.bing.com/search?q=Bluebo+B3000+forum+download+stock+firmware
baidu.com: bluebo b3000 stock firmware download link here
baidu.com: bluebo b3000 .zip
Also, no mirrors... So I'm really curious... Some advertisements mention "official stock software" to be delivered with your phone... Did you receive this? Also, where do the other users get their .zip stock firmwares??
sorry
devnullius
---------- Post added at 08:44 PM ---------- Previous post was at 08:27 PM ----------
http://forum.xda-developers.com/showthread.php?t=2046705
28th December 2012, 12:10 PM #4
Junior Member - OP
Thanks Meter 1
Posts: 10
Join Date: Nov 2012
rom for B3000
Quote:
Originally Posted by pe1fam
I see you have flashed your rom. My B3000 stopped working suddenly and only shows and android screen.
Dutch telephone shop told me that a newly flashed rom would probably solve the problem.
However I cannot find a suitable rom (they did not have it to).
The phone comes in recovery and can install a zip, so that is what I'm looking for.
Can you tell me where I can find a suitable rom (or I have to return the phone to China).
regards Han
yes I have flashed a rom. I don't remember where I downloaded it from, I can search if you want. Anyway I have the files on my pc. drop me an email to [email protected] if you want to contact directly.
My bluebo works again!
In the end the solution was simple. After re-flashing the phone, as was posted before, the touchscreen did not respond anymore. The solution to this problem was re-flashing the phone again but now using the boot.img and recovery.img that were stored in the clockworkmod folder of my phones SD card. On the folder with rom software for the Bluebo that I had obtained earlier, see above, both image files already existed. I replaced these with the files that I found in my clockworkmod folder, re-flashed the phone using the rom software, and voila the phone was again in working order.
Thanks DevNulius for your help!
I asked Felis for his binaries and I uploaded them here:
https://www.box.com/s/1ht7xbu196120dgxdy6n
Peace!
devnullius
b3000 destravar o celular
Meu b3000 estava com o teclado ruim e tentei fazer o backup e ele travou a tela como faço para meu celular voltar ao normal
por favor mim ajudem
Same issues but unsolved problems
Felis Serval said:
In the end the solution was simple. After re-flashing the phone, as was posted before, the touchscreen did not respond anymore. The solution to this problem was re-flashing the phone again but now using the boot.img and recovery.img that were stored in the clockworkmod folder of my phones SD card. On the folder with rom software for the Bluebo that I had obtained earlier, see above, both image files already existed. I replaced these with the files that I found in my clockworkmod folder, re-flashed the phone using the rom software, and voila the phone was again in working order.
Thanks DevNulius for your help!
Click to expand...
Click to collapse
devnullius said:
I asked Felis for his binaries and I uploaded them here:
Peace!
devnullius
Click to expand...
Click to collapse
Hello, I Think I have the exactly the same phone as you and I messed up while trying to root with SP flash tool and disconnected during the process.
Right now i have the same simptoms as you like the frezzed ANDROID screen at boot (and no conclusion of it).
I have already dowloaded the driver and tools, but now when I connect the phone it apears at device manager just while one second and disapear.
So I found this tutorial and helped a lot teaching how to use SPflash tool:
"How To use SP Flash Tool For China Mobile Phones - HDC Legend S4 [HD]" (I cant post links yet)
The flashing process is a bit different on the video, the blueboo (on my case) only can be flashed with the battery.
I have sucessfully restored a rom with the flashing process, but now I am with the same problem as Felis Serval few posts before now.
rildo22 said:
Meu b3000 estava com o teclado ruim e tentei fazer o backup e ele travou a tela como faço para meu celular voltar ao normal
por favor mim ajudem
Click to expand...
Click to collapse
(this brazilian guy "este chapa" its saying the touch is freezzed as me)
But I don't know how to find a proper clockworkmod to use and replace boot.img and recovery.img, I already made a clockworkmod update from a zip file on the SDcard, but the touchscreen stills don't working.
At the recovery mode I can test the buttons and are diplayed the code of every button when pressed.
A funny thing is the touch are recognized as a button too (the same code appears on every click at the screen). I don't Know if it is normal.
Unfortunately after boot and at the home screen I can not unlock because the touch dont work
POST resume in portuguese:
Depois de Flashear com os arquivos do Box do Felis Serval o Celular voltou a funcionar, porem o touch nao. Assim não consigo desbloquear a tela inicial.
Pelo Modo recovery consigo testar os botoes, no momento que é pressionado é mostrado o código, incluindo quando toco na tela (tambem é reconhecido como um botão e mostra sempre o mesmo código, não sei se isto é normal).
Hello,
I've got an Allview A4All bricked by rooting (following the tutorial on the site allviewa4all(dot)weebly(dot)com), got stuck at step 13, after that the phone won't boot up at all, nor the flash mode (connecting the phone without battery) does not work. Tried every button combination possible to try to start the phone, but it won't respond, neither communicate via USB. Does someone have an idea?
Thanks in advance!
eddie303 said:
Hello,
I've got an Allview A4All bricked by rooting (following the tutorial on the site allviewa4all(dot)weebly(dot)com), got stuck at step 13, after that the phone won't boot up at all, nor the flash mode (connecting the phone without battery) does not work. Tried every button combination possible to try to start the phone, but it won't respond, neither communicate via USB. Does someone have an idea?
Thanks in advance!
Click to expand...
Click to collapse
si eu am patit acelasi lucru. cum ai rezolvat problema?
Translation: The same thing happened to me. How did you fix the problem?
Metoda de recuperare telefon mort! cu firmware Airis TM350
Instalati driverele USB VCOM Driver si PL2303_Prolific_DriverInstaller_v1417
Opriti telefonul,scoateti bateria
Deschideti flash tools
selectati ,,MT6575_Android_scatter,,
Click pe SCI Download si apasati download
Hello everyone,
I'm here because I need help to install a stock image on my Acer Iconia A1-810 tablet, I've been stucked in a bootloop, because I failed at rooting it, that i could partially solve using an update via the recovery (it failed but now my tablet can be launched at least). So now, I'd like to install a stock rom to make everything back to normal but I absolutely don't know how to do.
I tried via adb/fastboot but the commands aren't responding on the device.
Also the main problem is that it seems there are no custom recovery available (CWM) for this tablet.
To finish I'd like to ask if someone know why I can't update my device using the OTA update (reboot + fail each time), I checked with root checker and others apps like that, no root detected (I uninstalled the root using the toolkit available here http://forum.xda-developers.com/showthread.php?t=2240029)
I hope someone will be able to help me and apologise for my bad english, hope you understood what I ask too.
Thanks for your help
I forgot to say i actually own an A1 810 WWGEN1 model that I bought in Europe if that helps.
Utilise a nouveau le toolkit avec la version stock system .img de la RV27RC03 Tu n'auras pas le root mais la dernière version officielle de chez acer et surtout une tablette fonctionnelle ...
Envoyé de mon A1-810 en utilisant Tapatalk
did you try running this command in bootloader mode ?: fastboot flash system system.img
your stock system.img may be found at:
http://forum.xda-developers.com/showthread.php?t=2240029
goodluck.
bootloader is locked so fastboot gives error whene i try to flash
Pls. Contac me if you already fix your problem..
I have the same problem.. i tried to root my tab and i failed... now i am lock in acer logo.. i cant enter to apx mode.. i try to flash system.img.gz that i manage to pull from my device.. but i always have download error, some sort of security deny-err 0x207
hope anyone can share how to fix this one..
Kalas001 said:
Hello everyone,
I'm here because I need help to install a stock image on my Acer Iconia A1-810 tablet, I've been stucked in a bootloop, because I failed at rooting it, that i could partially solve using an update via the recovery (it failed but now my tablet can be launched at least). So now, I'd like to install a stock rom to make everything back to normal but I absolutely don't know how to do.
I tried via adb/fastboot but the commands aren't responding on the device.
Also the main problem is that it seems there are no custom recovery available (CWM) for this tablet.
To finish I'd like to ask if someone know why I can't update my device using the OTA update (reboot + fail each time), I checked with root checker and others apps like that, no root detected (I uninstalled the root using the toolkit available here http://forum.xda-developers.com/showthread.php?t=2240029)
I hope someone will be able to help me and apologise for my bad english, hope you understood what I ask too.
Thanks for your help
Click to expand...
Click to collapse
Hi peeps,
I have brand new D625 latest variant and i was trying to root it. To my surprise, none of the towelroot works (V1 gets stuck and V3 says not supported) also tried Stump Root which also says unsupported device.
So i figured out i had to downgrade it to a lower version so i would be able to root it. But guess what? My recovery is only the android with exclamation mark and there's no option to flash the update.zip (the ext2 trick). No luck.
Then i tried the LG Flash Tool. When it starts, the phone first reboot at about 9% i think to get into download mode, but it simply reboot. Tryied it with DIAG/EMERGENCY/CS_EMERGENCY. No luck.
The Vol + and plug USB also does not work.
Please, if anyone has succeed on this matter, PLEASE SHARE!!
Thanks
too
I am having the same problem. :crying:
também estou com o mesmo problema.
xxurieljonxx said:
I am having the same problem. :crying:
também estou com o mesmo problema.
Click to expand...
Click to collapse
Yeah... I feel so impotent not being able to root it.
Please ppl.... HELP!
Pleeeeae. Really no escape???
Cant believe there is no way out.....
wisefreakz said:
Cant believe there is no way out.....
Click to expand...
Click to collapse
hey, check this topic http://forum.xda-developers.com/g2-mini/general/desbloquear-bootloader-e-modo-donwload-t3009229 , maybe this will help you out.
I have the same trouble. This motherf*cker phone won't boot into download or emergency mode because it has its bootloader locked. I hate LG! Do you know any solution for this? I have my brain burned
From my experience, towelroot always dissapointed me.
Just download Kingo Root APK to your phone, activate your mobile data and have fun.
If it fails, just click root again and it`ll work for sure.
As an alternative you can try Kingo Root for PC/APK or iRoot for PC/APK(former vRoot)
The sad part is that D625 uses a Tegra Chipset by nVidia and untill now, there is no confirmation of D625 unlocked bootloader.
Read more here: http://forum.xda-developers.com/g2-mini/general/unlocking-bootloader-tegra-version-t2933295
Can anyone help ? i accidently bricked my tv box due to install something to change widevine from L3 to L1....now im stuck in recovery mode...
i tried apply update from sd card....but it pop message saying E:/footer is wrong and signature authentication failed....
and i tried flash from pc but my pc just wont detect my tv box...and lastly i even tried to burn a sd card rom...but it keep saying "L(1041)Check uboot file after read failed".
anything i can do right now ?
Update : successfully connect my TV box to PC but still no luck on flashing....it stuck on 1% Download DDR and gave me error "[0x10103003]Romcode/Initialize DDR/Download buffer/ USB transfer error"
Been there, done that.
Solution: Had to change PC (upgraded from X99 to X570) to "fix" this problem.
Used method:
"USB burning tool" with old usb drivers ( ther's only 2, one recent and one old, search ) Just press the Start button and then connect USB on the box with toothpick (release it after 4 seconds) and it should start flashing passing the 1% stress and the USB transfer error.
Good luck
i have a95x f3 air earlier this is working well but now this display is not showing on my sony tv sound comes but display not come tv box light and clock is showing on tv box but on tv screen no display comes what this solution if any there please help in this regards and also i want to update this is android 10 if its possible that suggest how can we upgrade the same i have a to a usb cable
BlackJackE3 said:
Can anyone help ? i accidently bricked my tv box due to install something to change widevine from L3 to L1....now im stuck in recovery mode...
i tried apply update from sd card....but it pop message saying E:/footer is wrong and signature authentication failed....
and i tried flash from pc but my pc just wont detect my tv box...and lastly i even tried to burn a sd card rom...but it keep saying "L(1041)Check uboot file after read failed".
anything i can do right now ?
Update : successfully connect my TV box to PC but still no luck on flashing....it stuck on 1% Download DDR and gave me error "[0x10103003]Romcode/Initialize DDR/Download buffer/ USB transfer error"
Click to expand...
Click to collapse
2 things.
1. The stock ROM.
I had to try so many stock roms online till I found one that would actually work on my F3Air.
I don't know why.
it seems that particular box has different processor and WiFi models.
It's easy to miss but I found out eventually that mine was a *S905X3* with Mediatek WiFi chip.
Apparently so many ROMs are for S905 and S905X2 versions of the same box.
Rarely do you find a download link that specifies with processor version by the way......
2.
Untick 'Erase Bootloader' in the USB tool. It would never work when that is ticked.
You will have to use the USB tool BTW. No other way worked for me.
Hi @4llerbuntu
what Android version you have now on your F3 Air box?
rmghrr said:
Hi @4llerbuntu
what Android version you have now on your F3 Air box?
Click to expand...
Click to collapse
DEAR
MY H95X F3 IS FLICKERING ISSUES AND SOME TV IS NOT DETECTING
AND I USED THE ANDROID VERSION OF 9
THIS TYPE OF ISSUE YOUTUBE LINK
Have you tried Factory reset?
Is the issue specific to your TV set alone or happens with other TV sets.
I have different version though ( A95x F3 Air RGB )
rmghrr said:
Have you tried Factory reset?
Is the issue specific to your TV set alone or happens with other TV sets.
I have different version though ( A95x F3 Air RGB )
Click to expand...
Click to collapse
DEAR I HAVE DONE FACTORY RESET MANY TIMES BUT PROBLEM NOT RESOLVED
AND ALSO I CHANGED WITH ANOTHER TV BUT SAME PROBLME SHOWING
I HAVE ALSO A95X F3 AIR RGB MODEL
IF YOU HAVE ANY SOLUTION THAN KINDLY PROVIDE ME
4llerbuntu said:
2 coisas.
1. O estoque ROM.
Tive de experimentar tantas ROMs online até encontrar uma que realmente funcionasse no meu F3Air.
Não sei por quê.
parece que essa caixa em particular tem diferentes configurados e modelos de WiFi.
É fácil perder, mas acabei descobrindo que minha era um * S905X3 * com chip WiFi Mediatek.
Aparentemente, tantos ROMs são para as versões S905 e S905X2 da mesma caixa.
A propósito, você encontra um link de download que especifica a versão do processador ......
2
Desmarque 'Erase Bootloader' na ferramenta USB. Nunca funcionaria quando isso fosse selecionado.
Você terá que usar uma ferramenta USB BTW. Nenhuma outra maneira funcionou para mim.
Click to expand...
Click to collapse
I have the same problem. I've tried several roms but none of the wifi works in my box. Could you give me the download link for the rom you used?
neomello12 said:
I have the same problem. I've tried several roms but none of the wifi works in my box. Could you give me the download link for the rom you used?
Click to expand...
Click to collapse
http://geekbuying.mediafire.com/file/jhvyx6gth45vgxu/A95X_F3_AIR_20191024senk.img/file
Aidans Custom ROM. Pure ATV, no root. https://drive.google.com/file/d/1yxFWIgO7FYSg0XCnUPcPb-k9MppO08Bh/view?usp=sharing
rmghrr said:
Hi @4llerbuntu
what Android version you have now on your F3 Air box?
Click to expand...
Click to collapse
Android 9.
http://geekbuying.mediafire.com/file/jhvyx6gth45vgxu/A95X_F3_AIR_20191024senk.img/file stock rom
then i switched to Aidans Rom. Pure ATV, not rooted.
https://drive.google.com/file/d/1yxFWIgO7FYSg0XCnUPcPb-k9MppO08Bh/view?usp=sharing
4llerbuntu said:
2 things.
1. The stock ROM.
I had to try so many stock roms online till I found one that would actually work on my F3Air.
I don't know why.
it seems that particular box has different processor and WiFi models.
It's easy to miss but I found out eventually that mine was a *S905X3* with Mediatek WiFi chip.
Apparently so many ROMs are for S905 and S905X2 versions of the same box.
Rarely do you find a download link that specifies with processor version by the way......
2.
Untick 'Erase Bootloader' in the USB tool. It would never work when that is ticked.
You will have to use the USB tool BTW. No other way worked for me.
Click to expand...
Click to collapse
Worked for me thanks
It is possible to just re-image using an sd card.
Use Burn card maker to create the bootable sdcard from the stock img.
The trick here is you need to open the sd card from PC before using it on tv box and edit the ini file.
There there is an option for erase bootloader set to 1. Just delete 1, and type 2, then save the file.
Then the sd card is bootable and firmware will boot and install fine.
I had to try again and again with an SD card as I had no usb A to usb A cable. Someone posted here we need to have erase bootloader disabled when using the USB tool.
Guess what, same applies for sd card method
markspace said:
It is possible to just re-image using an sd card.
Use Burn card maker to create the bootable sdcard from the stock img.
The trick here is you need to open the sd card from PC before using it on tv box and edit the ini file.
There there is an option for erase bootloader set to 1. Just delete 1, and type 2, then save the file.
Then the sd card is bootable and firmware will boot and install fine.
I had to try again and again with an SD card as I had no usb A to usb A cable. Someone posted here we need to have erase bootloader disabled when using the USB tool.
Guess what, same applies for sd card method
Click to expand...
Click to collapse
how do i deactivate it[erase bootloader disabled when using the USB tool]since this procedure is by sd not by cable
4llerbuntu said:
2 coisas.
1. A ROM de estoque.
Eu tive que experimentar tantas roms de estoque online até encontrar uma que realmente funcionasse no meu F3Air.
Eu não sei por quê.
parece que essa caixa em particular possui diferentes modelos de processador e WiFi.
É fácil não perceber, mas acabei descobrindo que o meu era um *S905X3* com chip Mediatek WiFi.
Aparentemente, muitas ROMs são para as versões S905 e S905X2 da mesma caixa.
Raramente você encontra um link de download que especifica com a versão do processador a propósito......
2.
Desmarque 'Apagar Bootloader' na ferramenta USB. Nunca funcionaria quando isso está marcado.
Você terá que usar a ferramenta USB BTW. Nenhuma outra maneira funcionou para mim
Click to expand...
Click to collapse
E In my box the wifi is not working, how can I solve this problem
hi everyone. I have a hiremco nitro x3+ based on a95x f3. I tried to unroot but something went wrong. I tried to boot but stuck on android screen. Then, I tried to hard reset, turned it on it in recovery mode but box doesn't respond to remote. do you have any idea what to do?
Dionisus said:
....but box doesn't respond to remote...
Click to expand...
Click to collapse
Attach USB keyboard.
Any one tried the latest Slimbox sbx_a95x_f3_air_aosp_9_4.7z?
I installed it in F3 Air box and enabled root, so far every thing is good.
I am wondering how I can get Widewine L1 ?
There is one small problem though, some apps like "TATA PLAY" even when root is not enabled still recognize box as rooted and refusing to run.