Q: What supporting documents should I prepare when submitting a quick app for review?Check your app category and then prepare materials by referring to 1. Providing Application Copyright Information in Submission of Copyright and Publication Approval Number.
If you are an individual developer, you need to have your fingerprint on the stamped disclaimer and provide photos of you holding your ID card, showing both the front and back of the card. The app ID used in the disclaimer is the unique identifier allocated by AppGallery Connect to your quick app after it is created. To check the app ID, please refer to Creating a Quick App.
Q: What can I do if my quick app was rejected and the error message indicates that an error has occurred?
The error message is generally displayed because some minor errors exist in your quick app code. A common error is that an element is bound to an event callback function, but the function has not been defined. You need to install Huawei Quick App IDE and Huawei Quick App Loader and debug your app.
Q: Where can I submit the supporting documents required for releasing a quick app?
You can submit your copyright certificates in AppGallery Connect. In the App copyright certificate or proxy certificate section of the Version information page, upload up to five pictures of your certificates. If you have more than five pictures to upload, splice them together and ensure that each picture is clear and legible. Also remember to upload your RPK package and complete your app information. For details, please refer to Quick App Release.
Q: What can I do if my quick app was rejected because its name is a generic, common, or non-recognizable term?
Ensure that the name of your quick app does not only consist of generic words, such as “mobile phone”, “email”, “calendar”, “car”, or “investment”. For example, a quick app named “Express delivery search” was rejected as the name is too generic. Then its name was changed to “Express delivery at your fingertips”, which was approved.
Q: I have created a card in my quick app project, deleted configurations of the card, and then submitted the quick app for review. But why can’t Huawei app reviewers see my card package?
If you package your quick app project after deleting the card configurations, the card will not be packaged. As a result, Huawei app reviewers will not see your quick app package.
Q: My quick app was rejected because some of its images could not be displayed. However, these images can be displayed on my test phone. What should I do?
Our system will check your app and filter out images that are not named properly. Ensure that the name of each directory or file in your project contains no more than 300 characters, including letters, digits, periods (.), underscores (_), hyphens (-), or parentheses, but not double periods (..) or a period and a slash (./).
Q: My quick app was rejected because it already exists on HUAWEI Developers but not in AppGallery Connect. What should I do?
The problem may occur in either of the following situations:
● You submitted your quick app for the first time and it does not exist in AppGallery Connect.
To resolve the problem, you need to sign in to AppGallery Connect and create a quick app.
● You have updated your quick app in AppGallery Connect but have not submitted the update.
When updating your quick app, either submit it on HUAWEI Developers or in AppGallery Connect. Do not update your app on one platform without submitting it and then update it again on the other platform.
Related
Information from Symantec
The following significant malicious code alerts were released during the week of July 01 - 07, 2012. A complete
listing of malicious code alerts can be found in Appendix A.
Android.Nandrobox
https://alerts.symantec.com/loaddocument.aspx?GUID=dcf5b3d2-6f61-4580-b515-aac253289ab8
Android.Nandrobox is a Trojan horse for Android devices that steals information from the compromised device. It
also deletes certain SMS messages from the device.
Android package file
The Trojan may arrive as a package with the following name:
APK: com.androidbox.ysygbnet8
Version: 1.0
Permissions
When the Trojan is being installed, it requests permissions to perform the following actions:
· Access and change information about Wi-Fi networks
· Allow read-only access to phone state
· Monitor incoming SMS messages to record or perform processing on them
· Open network sockets
· Read SMS messages
· Send SMS messages
· Use PowerManager WakeLocks to keep the processor from sleeping or the screen from dimming
· Write SMS messages
Installation
Once installed, the application will display a new icon on the device.
Functionality
When the Trojan is executed, it may display the following message:
If you want to activate the full version, please send an SMS and it charges 2 Yuan. Customer Service Phone
number:010-84681340-8035.
Next, the Trojan gathers the following information from the device:
· GPS location
· IMEI
It sends the above information in an SMS message to the following phone number:
10658008105747
The Trojan also sends the stolen information to the following remote
location:
http://www.mobilehotdog.com/cnxmlrpc/xml.php
Next, the Trojan deletes all SMS messages that come from the following phone number:
10658008
Click to expand...
Click to collapse
Best make sure you're running a good AV!
Hi everybody!
We just released on the Play Store a free app called QshareR.
The main idea is to give an easy way to transfer text from pc to smartphone.
To do it, surf to our webpage qsharer.com [*need link here*], insert your text and create the QR code. Scanning it with QshareR you will have the text automatically copied on your smartphone clipboard, ready to be shared through any app installed on your phone.
It is also possible to encrypt the QR code that contains your text, with a 4 digits PIN. So you can share the QR publicly, but it can only be read by someone who knows the PIN. Scanning an encrypted QR with QshareR will automatically make appear a dialog, now insert the right PIN and you'll be able to read the content.
Play Store link: play.google.com/store/apps/details?id=com.ackorim.qsharer
We'll keep improving the app, so any comment, tip or review is more than welcome!
Let us know what you think, thanks! :laugh::good:
:laughear all, able to add tel,address... to description of event while long press on description field. This function is incredible useful to make a call to those people who relative to this event. I haven't seen any similar function except calendar of Palm OS.
Is anyone willing to developing an app to implement the function?
a activity pops up while long press on description of event, and allowed to pick up(or filter) contact whose info will be added to.
I am learning about android coding for 2 weeks. This will be my first to archive
I am developing an app that is similar to Tinder:
I am trying to develop an app, and I have until now a simple vertifation logic, I am pretty sure that this is not the best solution, but I would like to know what you think about it:
1) The user recieves a unique access token from Facebook SDK and sends it to the server that I created. The access token saved in the user schema and updated every time the user logged in.
2) Every time the user sends a post request, our server checks that the access token is correct, and if not it doesn't response.
3) It checks the user id, and only shown imaged can be checked.
Now what i am asking is:
Is it a good security solution?
What do you think about it?
SymptomWhen a deep link is used to jump to an online quick app, the quick app cannot be opened, and a message is displayed indicating that the app is suspended or not in the app service area.
Cause AnalysisThe possible causes are as follows:
l Incorrect package name
The quick app package name in the deep link is incorrect. The entered package name is not released on HUAWEI AppGallery. As a result, Huawei Quick App Loader cannot find the app.
l Incorrect release countries/regions
The package name is correct, but the quick app is not released in the service area where the user is located. For example, when you release quick app A in Germany, but the service area of the user's HUAWEI ID is set to UK. In this case, this problem occurs when the user uses the deep link to start the quick app.
Solutionl Incorrect package name
Modify the deep link redirection code and enter the correct name of the released app package.
l Incorrect release countries/regions
Switch the service area of the test account to the area where the app is released under Me > Settings > Country/Region on AppGallery.