Hello!. I have a Xiaomi phone that is bricked it just vibrates then bootloops until the battery goes to 0%.
If someone could help me i would greatly apreciate
Edit: i fixed it... somehow
Is it detected by a computer?
Brisolo said:
Hello!. I have a Xiaomi phone that is bricked it just vibrates then bootloops until the battery goes to 0%.
If someone could help me i would greatly apreciate
Edit: i fixed it... somehow
Click to expand...
Click to collapse
Hello I had the same problem and i found a workaround to fix it.
You have to use SPflash tool and MTK bypass tool with all necessary drivers installed and then you can easily flash a stable rom to your redmi 6a.
Yuhuu!
Try this up guys:
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Related
Hello,
I just received my redmi note 3 SD, with globale stable rom...
I wanted to install CM13.
So first, i wanted to install global dev rom to unlock bootloader.
I tried with updater but i have an error.
I tried with fastboot global dev rom and miflash with the tuto but i have always error.
I tried different version of rom and miflash and now my phone is on black screen. I haven't any acces to fastboot mod with start button+volum - or +.... I have only red light and black screen and when i connect phone to pc i see that: Qualcomm HS USB Diagnostics 900E (com10).
Can you help me to unbrick please?
first: u dont unlock the bootloader by flashing global dev rom ... u unlock the bootloader by either request official unlock and using the official xiaomi unlock tool or use the inoffiial method.
is the red light flashing? maybe youre in EDL mode? then u can flash the whole rom
I have one redmi note 3...unlocked with cm13 since june... i did all myself.
The new redmi note 3 with problem is for my father, i formatted my PC so i reinstalled all soft yesterday. I know how to unlock bootloader but i think i must be with rom global dev...
i think i'm not in EDL mode because when i refresh in miflash, i can't see my phone. Before, when i was in EDL mode, my phone was detected by miflash...
I have the red light ....
I see a solution is to remove backpanel, and remove the battery to reset the phone but i'm afraid to do this...
Thanks to help me
kevin761 said:
I have one redmi note 3...unlocked with cm13 since june... i did all myself.
The new redmi note 3 with problem is for my father, i formatted my PC so i reinstalled all soft yesterday. I know how to unlock bootloader but i think i must be with rom global dev...
i think i'm not in EDL mode because when i refresh in miflash, i can't see my phone. Before, when i was in EDL mode, my phone was detected by miflash...
I have the red light ....
I see a solution is to remove backpanel, and remove the battery to reset the phone but i'm afraid to do this...
Thanks to help me
Click to expand...
Click to collapse
you don't have to be on global dev rom to unlock bootloader, i unlocked mine officially on global stable rom
I have opened the back panel, disassemble motherboard and push the 2 pins... After, my device was detected as Qualcomm 2008 and not 900E and it was detected into miflash old version...
I tried to flash the last fastboot globale stable rom but i had an error " max buffer sector is 256"... And my phone came back to Qualcomm 900E in the windows 10 settings... And it's now not detected by miflash... I need to unmount again and touch the 2 pins on motherboard...
After what i can do to flash a rom correctly?? I don't understand why i have always an error...
Use newest version miflash on windows 10. Make sure it's plugged into USB 2.0 port.
Hello,
Problem solved... I disassemble a second time the phone, i pushed the 2 pins on the motherboard.
I did the same as this tuto: http://en.miui.com/thread-245347-1-1.html
At the middle of the tuto, i don't understand why but my phone turn on with logo "Mi" at boot!!! And the phone boot correctly...
On my PC, I have unistalled all programs and reinstalled all,.. After, i have installed ROM Global dev>Unlock BL> Install TWRP>Install CM13>Install Gapps... And now the phone works fine!!!
Thanks!
So, while trying to flash a new MIUI rom to my Redmi Note 3 in EDL mode I must have flashed an incompatible rom. My phone is acting as though it is in EDL mode but only when it is receiving power from the charger or computer. I cannot boot into recovery or fastboot mode, and the MiFlash tool does not detect it. The windows device manager still detects it however. So, is my phone permanently bricked or is there a way to fix this? I will be more than happy to post the MiFlash log.
How to solve Softbricked Redmi Note 4. Only fastboot mode working. When i try to flash fastboot rom then it says partition flashing not allowed. My bootloader is locked.
There is no edl mode in redmi note 4
Please help about this
sumitkhkh said:
How to solve Softbricked Redmi Note 4. Only fastboot mode working. When i try to flash fastboot rom then it says partition flashing not allowed. My bootloader is locked.
There is no edl mode in redmi note 4
Please help about this
Click to expand...
Click to collapse
Hi, This is the method for locked bootloader unbricking using a modified deep flash cable:
http://en.miui.com/thread-491655-1-1.html
Sent from my Redmi Note 4 using Tapatalk
Wilderone said:
Hi, This is the method for locked bootloader unbricking using a modified deep flash cable:
http://en.miui.com/thread-491655-1-1.html
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
i tried many methods dont know which method works for me. i think this method worked for me
Hello friends i´m new her. I hav an recently Note 4 with bootloop. I´m trying this mithod to solve the problem (already tried lots of methods without sucess) and in the step when to connect to pc and try to set adb, imediatly after conect to usb on pc the phone boots and keeps bootlooping after "MI mi.com" white symbol. Any ideas guys? Dont know anything more to do.... please help
zbrix said:
Hello friends i´m new her. I hav an recently Note 4 with bootloop. I´m trying this mithod to solve the problem (already tried lots of methods without sucess) and in the step when to connect to pc and try to set adb, imediatly after conect to usb on pc the phone boots and keeps bootlooping after "MI mi.com" white symbol. Any ideas guys? Dont know anything more to do.... please help
Click to expand...
Click to collapse
Follow this tutorial, make a deep flash cable as shown. This will work on RN4 SD version only. I am the one who got bootloop on RN4 SD first time and i made the new cable and did everything well.
http://en.miui.com/forum.php?mod=viewthread&tid=491655
this diy method not works tried it many time
sumitkhkh said:
How to solve Softbricked Redmi Note 4. Only fastboot mode working. When i try to flash fastboot rom then it says partition flashing not allowed. My bootloader is locked.
There is no edl mode in redmi note 4
Please help about this
Click to expand...
Click to collapse
Even I had this problem. However I fixed this. Try these steps
1.Press power button and volume+ button till you see Phone and USB cable picture.
2.Install lastest version of Chinese Mi Pcsuite (Don't use English version as it has some issues detecting your phone).
3. Now connect your phone to pc via usb cable
4. A popup menu will appear in Chinese. Select the second option which is factory reset.
5. After that the phone reboots and everything will work fine. However you will lose user data.
Yes but mine is MTK version?
Redmi note 4 Snapdragon
Hii friends I am new here .
My redmi note 4 Snapdragon is not starting and directly go into fastboot mode when I press power button phones is vibreat and show fastboot mode ..
Directly enter in fastboot ..plzzz help me...I have no idea how to fix this problem plzzz some one help me..plzzz
Read my post at discussion thread..... I can help..
The link
The link to how to deep flash doesn't work. Is there any other tutorial on making a deep flash cable?
sumitkhkh said:
How to solve Softbricked Redmi Note 4. Only fastboot mode working. When i try to flash fastboot rom then it says partition flashing not allowed. My bootloader is locked.
There is no edl mode in redmi note 4
Please help about this
Click to expand...
Click to collapse
enter fastboot mode
type fastboot oem edl to enter edl mode
use the mi flashing tool (not the flash unlock one) to flash the fastboot rom :good:
hi i was trying to update the framwork yesterday throw twrp evrything was going fine suddendly phone stopped and red light blinking started i searched for the solutions and some ever it was said remove the backpanel and disconnect the battery and reconnec the charger it will take u to fastboot but after doing this iam unable to get anything now the red blinking have also been stopped iam not getting what to do now can any1 help me out
thanks in advance
Anmol108 said:
hi i was trying to update the framwork yesterday throw twrp evrything was going fine suddendly phone stopped and red light blinking started i searched for the solutions and some ever it was said remove the backpanel and disconnect the battery and reconnec the charger it will take u to fastboot but after doing this iam unable to get anything now the red blinking have also been stopped iam not getting what to do now can any1 help me out
thanks in advance
Click to expand...
Click to collapse
Got out of it throw mi flash. Tool
Himanshu.kulkarni3 said:
enter fastboot mode
type fastboot oem edl to enter edl mode
use the mi flashing tool (not the flash unlock one) to flash the fastboot rom :good:
Click to expand...
Click to collapse
That command does not work anymore. Tried it, it says it rebooted it but the phone itself doesn't do anything but stay in fastboot mode
Hi everyone,
I have Xiaomi Redmi Note 4, and when I using him, hes gone. Nothing work, no fastboot, no twrp, only Red led when i charge battery.
And i want to flash miui global in MiFlash and... I have error PING TARGET VIA FIREHOSE.
Guys please help me, I tried in 6 miui globals, china, any MiFlash version(Beta,2014,2015,2016) and dont work
Have a nice day.
P.S I have Qualcomm HS-USB QDLoader 9008 (COM3)
Try to flash in edl mode... For this you have an authorized mi account
I got same issue some time before just remove the battery connector after that connect the phone with pc (WITHOUT BATTERY CONNECT) flash again using miflash tool
ismail.ahmed84 said:
I got same issue some time before just remove the battery connector after that connect the phone with pc (WITHOUT BATTERY CONNECT) flash again using miflash tool
Click to expand...
Click to collapse
I tried IT and dont work
anil5462 said:
Try to flash in edl mode... For this you have an authorized mi account
Click to expand...
Click to collapse
I flashed on edl and dont work
i experienced same issue before and nobody in XDA cant fix this (or wont bother to reply,, idk)
try test point method. if it doesn't work, i'm afraid that you have broken hardware. you have to replace it
anil5462 said:
Try to flash in edl mode... For this you have an authorized mi account
Click to expand...
Click to collapse
rs168 said:
i experienced same issue before and nobody in XDA cant fix this (or wont bother to reply,, idk)
try test point method. if it doesn't work, i'm afraid that you have broken hardware. you have to replace it
Click to expand...
Click to collapse
I tried testpoint and always have error writing on Device in miflash
Snajper322 said:
I tried testpoint and always have error writing on Device in miflash
Click to expand...
Click to collapse
okay .. too bad you should replace your device, or you can find a good mechanic to replace some broken parts. it usually works
did you drop it?
or it happened during installing rom or something?
How does it happened please tell us.
Charge it overnight
Hold the power button 20-30 seconds the next day
Boot the device in fast boot mode by holding volume down+power button. Then go to MiFlash and flash fastboot redmi note 4 rom in edl mode(Unlock bootloader by running the last script file and then proceed to do the following steps). Download stock fastboot rom for redmi note 4 from official mi website(Note: The stock fastboot rom is different from stock recovery rom). While flashing the rom, below you have the option to choose three modes, click clean all and lock. Flash this rom and you're device will be working in no time. Make sure your device has adequate battery
Good day, I need an explanation please... I wanted to install Lineage os on my Xiaomi it didn't work, I have unlocked bootloader everything, I wiped the data and the whole system and tried to flash Lineage os again but it still didn't work. So I tried to flash the flood firmware and the phone is stuck on the miui logo and won't boot. I rebooted the phone into recovery mode and factory reset the phone and tried to install the phone again but the phone still stuck on the miui logo so I booted the phone into fastboot mode and typed fastboot erase system and fastboot erase cache and tried to flash the same firmware and it didn't help. I'm using a firmware that I've used before and when I got my phone into bootloop that firmware saved me but not now. So I tried to install a different version of firmware for my Xiaomi and still the same problem the phone is still stuck on the miui logo. Any explanation? Sorry for my bad English, I'm writing through a translator.
I now searched XDA. I found out that many people have the same problem as me. It's probably a hardware problem
[GUIDE] No Auth Xiaomi Redmi 8A, Redmi 8A Dual and Redmi 7A EDL Flashing using Mi Flash Tool.
[GUIDE] Xiaomi Redmi 8A EDL Flashing using Mi Flash Tool. (Also works for Redmi 7A). This tutorial has been successfully tested with Redmi 8A, Redmi 8A Dual and Redmi 7A all featuring a Qualcomm SDM439 Chipset. WARNING: DO NOT SHORT THE TEST...
forum.xda-developers.com