[ROM][11][Lake][OFFICIAL] RevengeOS 4.0 - Moto G7 Plus ROMs, Kernels, Recoveries, & Other De

[ROM][11][Lake][OFFICIAL] RevengeOS 4.0 - Moto G7 Plus ROMs, Kernels, Recoveries, & Other De

CHANGES
04/11/21:
- RevengeUI is here!
- Dropped MotoClock.
- Update display config to 1.9.
- Increased status bar height for notch.
- Drop QS height in favor of the new interface.
Notes:
- Dirty flash is possible!
- For temporary fix blur lag, go to t.me/FraaxiusGrp and type #fix-blur.
04/04/21:
- Initial official build.
- Added Moto Live Wallpapers.
- RevengeUI release in the next build... Stay tuned!
03/12/21:
- Initial build.
- Added MotoClock.
- Added MotoCam2.
- Improved rounded corners.

Reserved 2

Reserved 3

Does this ROM support signature spoofing? Thx.

Playing with this a little. Wasn't sure which version (11). AFWall plays well with this, and the firewall log works so far.

Fraaxius said:
INSTALLATION- Boot TWRP img
- Flash Copy-Partitions-ab. (Only if you install from Stock ROM)
- Make backups of EFS, Persist, Persist 2, Modem, FSG & DSP. (Only if you install from Stock ROM)
- Wipe > Format Data > Yes
- Flash RevengeOS build
- Flash TWRP Installer
- Reboot.
After...
- Optional: Reboot in recovery
- Optional: flash FlameGApps
- Wipe > Format data > Yes
- Reboot system
U need Magisk?
- Reboot to recovery
- Optional: flash Magisk (if you want to root your device as well) (it's recommended to flash Magisk post first boot)
- Reboot system.
Click to expand...
Click to collapse
I currently use LineageOS 18 on my Moto G7 Plus, which I successfully installed myself using the official instructions. Never used TWRP.
Lineage is OK. Nothing great. Android itself just gets worse with ever generation it seems. And some things don't work at all on mine (like voicemail).
So, I want to try this Revenge OS. Questions:
1) I don't understand what all these install directions actually mean. Sorry, I'm just not that experienced. How do I learn what they all mean so I don't brick my phone?
2) How do I know I can trust Revenge as an OS that doesn't have extra malicious code in it (key/screen loggers, etc) that will get my data, passwords, crypto, etc?
Thx.

synrgii said:
So, I want to try this Revenge OS. Questions:
1) I don't understand what all these install directions actually mean. Sorry, I'm just not that experienced. How do I learn what they all mean so I don't brick my phone?
2) How do I know I can trust Revenge as an OS that doesn't have extra malicious code in it (key/screen loggers, etc) that will get my data, passwords, crypto, etc?
Thx.
Click to expand...
Click to collapse
1) That's something that you could look into. You should be able to google and learn what the terms mean or look at the instructions for other custom ROMs here and see if there's a better explanation as generally the procedures are quite similar.
2) The source code IS available at https://github.com/revengeos so you can audit it yourself but most people aren't going to know what to look for. You could check Revenge's Telegram or other connections and see what others are experiencing and saying.

srshamblen said:
Does this ROM support signature spoofing? Thx.
Click to expand...
Click to collapse
yes

Thank you for the OS. I installed it and started testing on my G7 plus. It gave me a feeling of a very snappy system, letting fast apps functioning. Great! The only issue I discovered is the aborting wallpaper app which prevents me from changing the main screen appearence. But I could live with it. So I proceeded to enable rooted apps, like AWFirewall, via Magisk. For this I needed to install TWRP via recovery mode.
And here I knocked into a true problem... The recovery boot disappeared! Trying to reset to Recovery mode I only fall into a screen with dead android icon saying "No Command". I can alternatively enter the bootloader, but when I opt for Recovery Mode or other options, the device enters into bootloop. I can only launch back the OS which works without root.
I tried to lauch TWRP via fastboot command: fastboot boot twrp-3.5.2_9-0-lake.img. TWRP runs but the touchscreen remains unresponsive. So no chance that way either for installing Magisk. Flashing TWRP does not work, it says "no partitition found".
I tried some advices proposed in forums and found out that remounting /system and /cache fail via "adb mount -o rw,remount -t yaffs2", only /data is detected. I presume that the OS installation procedure in some way blocked access to system partititions.
Could you please suggest a solution of the issue. I'd like to take back control over root and recovery partititions.
Thanks for your advice and help

This ROM is all about open source APPS : Kudos!
Maybe some folks could not like the replacement of the originals AOSP apps
Except for few things (buttons and gestures) not costumizable , its a shame
Screenshot are from me ...

BEWARE : TWRP touchscreen totally unresponsive , its true
After install this ROM , when wanted to to install other ROM thru TWRP the touchscreen totally unresponsive...
SOLUTION: install another ROM from "ADB sideload" to regain TWRP touchscreen, worked for me
Regards

Thank you for reviewing this rom!

Hello i think download link is not working, i would like to test this rom

Related

Paranoid Android 7.2.1 - AOSPA - Pixel XL

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We’re really excited to announce that we are releasing our Nougat flavour of Paranoid Android. We have a lot in store - with a mix of both features & improvements.
First & foremost, we have moved our code base to be fully CAF based. This brings many improvements to your device. The key improvement here is that Qualcomm hardware is better tuned on the CAF base and with our additional optimisations we can provide a smooth and fluid user experience that will let you enjoy using your device without any lags.
On first launch you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson who’s teamed up with us again and created several beautiful pieces of artwork. For those of you who don’t know, Hampus is a multi-disciplinary artist whose work stands itself and we’re glad to have him onboard. We have also added several new features and made improvements to the UI of the system that we believe would enhance the overall experience.
Pie
We’ve been working hard on redesigning this key feature of our portfolio and we’re really happy with how it has turned out. The whole design has been reworked and it fits in well with the overall feel of Google’s Material Design. This gives you the opportunity to use more gesture based control for navigating, rather than using the standard Navigation Bar at the bottom of your screen. Expect improvements and additions in the future.
Color Engine
We’re proud to announce our newest feature - Color Engine. Color Engine allows you to seamlessly change the colors of your device to be in Light, Dark (Pixel) and Black modes with a variety of accent colors to choose from. This makes changing the theme of your device really quick without having to install any extra packages on your device.
Major features:
- Reworked Pie
- Color engine
- Immersive mode
- Buttons customization (including navigation bar)
- On the spot controls (OTS)
Minor features:
- SafetyNet Compatibility
- Battery/Notification LED control
- Recent tasks locking
- Battery icon customization
- Google now page in default launcher
- Substratum (OMS) support (Color engine will be deactivated if you use Substratum)
- Quick pulldown
- Various performance and battery improvements
- Display Burn-in protection (for OLED screens)
- More to explore
Device specific features for OP3(T) (List is being updated):
- Oneplus 3(T) custom camera HAL: Resulting in better picture quality than OEM.
- Implemented custom picture background processing leading to very fast shutter speed (OnePlus 3(T) specific)
- Offscreen gestures
- sRGB support (OnePlus 3(T) specific)
- Alert slider customization
- aptX and aptXHD support
- Specific device performance and battery optimizations (details on this coming)
Note: Custom kernels are explicitly unsupported and will cause issues
unless they state that they are AOSPA compatible or AOSPA based!
Download
Get our latest Pixel XL build here.
Changelogs
As we're getting back into the thread game, keeping up with threads and updating them as per changelogs can be too hectic given our schedule. However, very detailed changelogs always go up on our Google+ page, follow us for constant updates!
Instructions & requirements
* Wipe system, data and cache
* Flash Rom plus the twrp zip
* reboot again to recovery
* flash Gapps and twrp zip
Dirty flash
* flash Rom plus the twrp zip
* reboot again to twrp
* flash Gapps and twrp zip
Important / Useful links
OpenGapps
SuperSU root package
Paranoid Android Community (G+)
Our kernel sauce (Pixel (XL))
Bug reports on Google Sheets
As always, we listen to what you have to say. Help us make PA better by submitting good bug reports possibly with a log attached. Learn how to take logs here. Submit bug reports and we'll try to iron out issues as soon as possible - it really helps a lot.
Our device maintainers and CAF caretakers @TheCrazyLex, @xboxfanj, @arter97, @ChrisLahaye @Thecrazyskull are right here at xda. Mention (@) them if you need some assistance and/or when reporting bugs.
Cheers and #StayParanoid!
XDA:DevDB Information
Paranoid Android, ROM for the Google Pixel XL
Contributors
freak_97, Thecrazylex , Thecrazyskull
Source Code: [url]https://github.com/AOSPA[/URL]
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Current Stable Version: 7.2.1
Stable Release Date: 2017-07-20
Created 2017-06-02
Last Updated 2017-07-20

M new to XDA. Can any one tell me flashing guide for this rom.

Wow Paranoid Android is here

Runs great. Is there any chance of adding option to adjust navbar height?

As this is just a direct copy and paste from the op3/t sub your gonna need new install instructions for the pixel as it's totally different to any other device
jiexi said:
Flash-all May to slot A
Switch to slot B
Flash-all May to slot B
Switch to slot A
Flash April bootloader to slot A
Switch to slot B
Flash April bootloader to slot B
Switch to slot A
Fastboot boot TWRP RC1
Wipe Factory Reset
Flash ROM
Flash TWRP RC1
Reboot System, Let it get to the setup screen
Restart to Recovery
Flash SuperSu v2.82
Reboot System, Let it get to the setup screen
Flash EX
Reboot System, Let it get to the setup screen
Set your **** up
Click to expand...
Click to collapse

Have always loved this ROM. Any chance on flashing instructions. Thanks

buzz11699 said:
Have always loved this ROM. Any chance on flashing instructions. Thanks
Click to expand...
Click to collapse
Probably the same as any other rom here that doesn't come with Gapps.
Reboot to TWRP
Factory reset
Flash rom
Flash TWRP (flash VBS if on May BL)
Reboot recovery
Flash Gapps
Flash Vendor (if you need to)
Flash SU/Magisk
Flash TWRP (flash VBS if on May BL)
Reboot to System

Thx for bringing PA back.
Runs damn smooth for a first release.
Some off my key features are missing, but knew that. Maybe they come in time.
Am I blind or why I can't find any klick to turn on pie. Just find the pie themer.

mikaole said:
Thx for bringing PA back.
Runs damn smooth for a first release.
Some off my key features are missing, but knew that. Maybe they come in time.
Am I blind or why I can't find any klick to turn on pie. Just find the pie themer.
Click to expand...
Click to collapse
I can't seem to get this to boot. Did you just use the normal flashing instructions for any other May Pixel ROM?

First I am still on April bootloader.
Never flashed may stock.
Always flashing like this:
Boot to twrp
Wipe factory reset
Advanced wipe cache and system
In twrp reboot
Reboot to the not active slot
There will be a error message that you don't have system installed
Hold vol- and reboot
You are going straight to bootloader on the not active slot
Reboot from there to recovery twrp
In twrp flash rom and twrp
Hold vol- and reboot
From bootloader reboot recovery twrp
In twrp flash image O vendor as vendor
Then flash gapps. I used beans
Reboot
Once in system
Reboot to twrp and flash su
Because I never was on may image I still use sr3
Reboot
Be happy

mikaole said:
First I am still on April bootloader.
Never flashed may stock.
Always flashing like this:
Boot to twrp
Wipe factory reset
Advanced wipe cache and system
In twrp reboot
Reboot to the not active slot
There will be a error message that you don't have system installed
Hold vol- and reboot
You are going straight to bootloader on the not active slot
Reboot from there to recovery twrp
In twrp flash rom and twrp
Hold vol- and reboot
From bootloader reboot recovery twrp
In twrp flash image O vendor as vendor
Then flash gapps. I used beans
Reboot
Once in system
Reboot to twrp and flash su
Because I never was on may image I still use sr3
Reboot
Be happy
Click to expand...
Click to collapse
Why are you holding down volume and rebooting?
Just go to the reboot menu and select recovery, you reboot into recovery..
Im confused

Sometimes it doesn't worked for me. Don't know why.
So I got used to it.
And I didn't mentioned it because I think it's not necessary anymore.
I still Wipe 3 times because I am used to it from years before with clockwork

mikaole said:
Thx for bringing PA back.
Runs damn smooth for a first release.
Some off my key features are missing, but knew that. Maybe they come in time.
Am I blind or why I can't find any klick to turn on pie. Just find the pie themer.
Click to expand...
Click to collapse
You have to enable Immersive Mode on the quick settings toolbar.

mikaole said:
Am I blind or why I can't find any klick to turn on pie. Just find the pie themer.
Click to expand...
Click to collapse
It's actually a quick toggle up in the notification bar. Just turn on immersive mode and it should enable.
edit-oops im too slow

Google camera crashing...anyone knows some kind of fix?

Has anyone tested WiFi calling and VoLTE?
Great to see PA back, your contributions to the community have been very enriching and looking forward to seeing that continue now that the team is active again. Keep up the good work guys!

killerdude7777 said:
Google camera crashing...anyone knows some kind of fix?
Click to expand...
Click to collapse
Flash beans gapps from last month. Someone else said that worked. Or if you want to wait I will be flashing this rom here shortly with the mentioned gapps. I can report back

killerdude7777 said:
Google camera crashing...anyone knows some kind of fix?
Click to expand...
Click to collapse
I used aroma open gapps and left stock camera and it works.

killerdude7777 said:
Google camera crashing...anyone knows some kind of fix?
Click to expand...
Click to collapse
Beans gapps camera works fine

I have installed beans gapps. Can't sign in with my google account, having an error for Cannot connect with Google servers. Some people suggested 2 step verification was the problem. Turned it off and cleared the data for google apps. Still can't connect. Any suggestions ?

[ROM][10] crDroid 6.27 [begonia/begoniain][OFFICIAL][FINAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Instructions:
First time installation:
Carry out the necessary measures to unlock the bootloader.
Connect the phone to the PC with the supplied cord.
Transfer all valuable data from your phone's internal memory to PC. If you make a backup, then the folder with the backup (except if the backup is located on microSD).
Reboot into Fastboot mode (see the header in the F.A.Q. for how to enter it)
Download and unpack on your PC >> this << archive.
In the unpacked archive, go to the folder with your device type (if you have an Indian phone, then in [begoniain], all others in [begonia].
Run !_FLASH_IT_W.bat on Windows or !_FLASH_IT_L.sh on Linux (DO NOT CHANGE THESE SCRIPTS UNLESS YOU WANT TO GET A BRICK!!!)
If something went wrong, check if ADB drivers are installed on Windows, or fastboot packages on Linux.
The necessary images will be flashed and erased, etc., after which the phone itself will reboot into TWRP recovery.
Make the format Data (section Wipe / Wipe, click the Format Data button, then enter "Yes").
Reboot from TWRP to TWRP
Make sure your phone's internal memory is opened in TWRP mode on your PC.
Before starting the ROM installation, it is recommended to take measures to unlock the bootloader and save the critical sections of the phone.
Download and place the archive with the firmware in the internal memory of the phone, as well as Google Apps, if you need them.
Do a Wipe/Cleanup of the "system", "vendor", "cache" and "Dalvik|Art Cache" partitions.
Click Installation / Install and select the archive with the firmware, then click the Add / Add button and select the archive with Google Apps, everything else will be installed and updated automatically.
After installation, reboot again from TWRP to TWRP
Make the format Data (section Wipe / Wipe, click the Format Data button, then enter "Yes").
Reboot into the system and wait for initialization, usually 10 minutes is enough, if the download still fails, reboot forcibly into recovery (long hold volume up + on) and repeat the Format Data operation
After booting the system, perform the initial setup, and then reboot.
TWRP installation:
Before starting the ROM installation, it is recommended to take measures to unlock the bootloader and save the critical sections of the phone.
Save important data, photos, and more.
Download and place the archive with the firmware in the internal memory of the phone, as well as Google Apps if you need them.
Reboot into TWRP if you're not already there (reboot by holding the volume up button).
Wipe/Cleanup the "system", "vendor", "cache" and "Dalvik|Art Cache" partitions.
Click Install/Install and select the firmware archive, then click the Add/Add button and select the Google Apps archive, everything else will be installed and updated automatically.
After installation, reboot from TWRP to TWRP
Do data formatting (section Wipe / Wipe, click the Format Data button, then enter "Yes").
Reboot into the system and wait for initialization, usually 10 minutes is enough, if the download still fails, reboot forcibly into recovery (long hold volume up + on) and repeat the Format Data operation
Once the system has booted, perform the initial setup and then reboot.
Update installation:
USE THESE INSTRUCTION ONLY FOR UPDATING FROM MY PREVIOUS BUILD TO A NEW !!!
Make backups.
Download and place the ROM to the internal memory of the phone
(I do not recommend SD cards, often phones fail because they turn out to be broken)
Reboot in TWRP (vol+ with power button)
Click on Install menu and chose this ROM
After installation click on "Wipe Art/Dalvic" button
Reboot to system
If you have a bootloop, make Format Data in TWRP (all data will be erased).
Rollback to the factory firmware:
Download and unpack any MIUI Fastboot version ROM for begonia or begoniain
Reboot to Fastboot mode (vol- or vol+ with power button)
Run flash_all.bat on Windows or flash_all.sh on Linux
DO NOT USE OTHER ROLLING METHODS IF YOU DO NOT WANT TO GET BRICK !!!
Sources:
ROM: https://github.com/crdroidandroid
Device: https://github.com/TTTT555/device_xiaomi_begonia
Kernel: https://github.com/TTTT555/kernel_xiaomi_begonia
Special thanks:
@FancyPants
@yourdaddy907
@android_lover
@ZIDAN44
@Xakep1993
And other Begonia development team members
Visit official website @ crDroid.net
crDroid Community Telegram
crDroid Device Telegram (links to donations to the author here)
Donate to help crDroid team pay server costs.
XDA:DevDB Information
crDroid, ROM for the Redmi Note 8 Pro
Contributors
TTTT555
ROM OS Version: Android 10
Based On: LineageOS & POTATO project
Version Information
Status: Stable, Final, EOL
Created 2020-06-29
Last Updated 2022-10-19

Build type: Final (EOL)
Support chat (TG): https://t.me/crDroidBegonia
Notes:
- Recomended install fastboot version of MIUI A10 before.
- If you have bootloop after installation, try format data again or to change GAPPS or flash MIUI and try again.
- Reboot after a clean install and initial setup so that the BegoniaParts item appears in the settings.
- GAPPS and Google Photo required for G-Cams. Opengapps recomended [ARM64 Pico or Nano (for OK Google)].
- If you will use Viper FX, then do not forget to enable legacy mode in the application settings.
- If you will use the built-in G-Cams, do not forget to apply configs (three taps between the camshot button and gallery button). If the camera does not find the built-in configs, just reboot the device and try again.
- If you OFF James DSP after ON, reenable Dirac (OFF/ON), if you need it.
- If you OFF G-cam 64 after ON, reboot the device, otherwise bugs are possible.
- ANX cam: If you have problems with a wide angle camera - just turn off the lens distortion correction function, or set the mode to 9/16.
- If you have sound crackles, try ON OFF James DSP.
- You can find additional kernels in the support chat (with ALMK, reduced voltage etc.)
===== 19 October, 2022 =====
- BegoniaParts updates
- Media and audio fixes for game streamers
- Game performance improvements
- Kernel switched to SLMK by default
===== 05 January, 2022 =====
- Fixed playing of system sounds, incl. ringtones.
- The config for the built-in Gcam is now also loaded after format data.
- Fixed definition of wide-angle camera.
BegoniaParts:
- Added additional performance profiles
- Added codec switcher
- Added 80MHz Wi-Fi range switch
- Added Force 64MP switch
- Added V-Sync switch
- Added switch for debug.sf.latch_unsignaled
- Added switch to disable HW overlays
===== 31 December, 2021 =====
- Updates are now downloaded to /sdcard (default folder by TWRP)
- Fixed flickering in Night mode
- Added advanced Night Mode adjustment values
- Wi-Fi Display for non-Chromecast devices
- Fix TTL for advanced operators like red
- Added GCam Mod Burial 8 (the best in terms of color rendition at the moment), the configuration file is unpacked into internal memory, you just need to activate it in the camera
- Unification of Keymaster and TWRP with MIUI
- Additional codecs from MTK
- Integrated Dirac effect instead MiSound
- Changed amplifier mode for external speaker
- Fixes for SafetyNet
- Vertical sync is activated and parameters are selected for better responsiveness of the interface
- Fixed the volume of incoming calls in the headset and small speaker (a script has been written to recalculate the volume levels during a phone call, in the firmware settings you can select up to 60 levels)
- Another tuning ZRAM
- Added new Sepolicy rules
- The installation archive integrates firmwares for the Global and Indian versions of the phone, together with TWRP
- Updated factory libraries and added for a new type of frontal camera, as well as added sound libraries from newer MTK devices
- Thermo profiles from the Indian version of the phone
- Removed Sta2gBw 1 from /vendor/firmware/wifi.cfg which can cause problems (set manually to whoever needs it)
- And many other subtle improvements and additions
Kernel:
- Added driver for new frontal camera
- Enabled KSM support by default
- Added an engine for adjusting the strength of vibration
- Added new schedulers and "sioplus" selected by default
/ Thanks to 7Soldier for help with some features /
BegoniaParts settings app:
- MiSound -> Dirac Sound
- Added performance profiles by adjusting the Schedutil governor downrate (you can edit the parameters yourself or add new ones in the files /vendor/bin/xiaomiparts.sh (chmod 0755) and /vendor/etc/init/hw/init.xiaomi_parts.rc (chmod 0644 )
- Choice of TCP Congestion Algorithm
- FPS sensor
- Additional wake-up gestures
- Vibration strength adjustment

first time installation instructions for miui users or both miui and cfw custom rom users?

adil_muhmd said:
first time installation instructions for miui users or both miui and cfw custom rom users?
Click to expand...
Click to collapse
cfw users may can start by installing the archive (with next wipes, and format data if it was encrypted)

I installed myself, the firmware fire installation is real in 2 clicks).

Sir,
what is HCE mode?

keiyrno said:
Sir,
what is HCE mode?
Click to expand...
Click to collapse
HCE - Android cloud storage technology for card data, with temporary pay tokens on phone, used by G-Pay, etc.
There is also data storage inside the NFC chip - SE (secure element), which can also be used to store e-sim data

TTTT555 said:
HCE - Android cloud storage technology for card data, with temporary pay tokens on phone, used by G-Pay, etc.
There is also data storage inside the NFC chip - SE (secure element), which can also be used to store e-sim data
Click to expand...
Click to collapse
thank you for your explanation sir

Yayy thanks TTTT555 for AOSP

@TTTT555
When using QS- "night light". The screen will flash at a fixed frequency, there seems to be some problems.?
anyway, advance THANKS, Its very very good Begonia ROM!:good::good:

2 buttons navbar gesture error/bug: gesture for recents and chang into open apps. Overall amazing ROM, I love open source plus its lighter for download.

Anyone knows how to solve this? Anytime I restart my phone, I get a notification that my security has been weakened.

eocobby721 said:
Anyone knows how to solve this? Anytime I restart my phone, I get a notification that my security has been weakened.
Click to expand...
Click to collapse
I guess its related with permissive kernel, or disabled SELinux...

KonahZave said:
I guess its related with permissive kernel, or disabled SELinux...
Click to expand...
Click to collapse
Yes it is. Any way to fix that?

eocobby721 said:
Yes it is. Any way to fix that?
Click to expand...
Click to collapse
oooh yeah its you CObby only now I noticed your nick, well anyway I dont know sorry :crying:

KonahZave said:
oooh yeah its you CObby only now I noticed your nick, well anyway I dont know sorry :crying:
Click to expand...
Click to collapse
I was waiting to see if you notice :laugh:
Thanks.

I'm also having lots of reboots with the fingerprint sensor. Looks like it's much slower than the standard one, and you need to keep your finger still for much longer.

@TTTT555 , did you disable the secure element due to the spiread_dma error?

eocobby721 said:
Yes it is. Any way to fix that?
Click to expand...
Click to collapse
Later, but now you may off notice in /Settings/Security/Trust
u8ububu said:
@TTTT555 , did you disable the secure element due to the spiread_dma error?
Click to expand...
Click to collapse
nope, it is not related to this and will be fixed soon
e45cream said:
I'm also having lots of reboots with the fingerprint sensor. Looks like it's much slower than the standard one, and you need to keep your finger still for much longer.
Click to expand...
Click to collapse
you're out of luck, your phone is from a problematic series with a fingerprint for custom firmwares, but we are working on it

Thanks Sir

[ROM][11] crDroid 7.17 [begonia/begoniain][OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Instructions:
First time installation:
Carry out the necessary measures to unlock the bootloader.
Connect the phone to the PC with the supplied cord.
Transfer all valuable data from your phone's internal memory to PC. If you make a backup, then the folder with the backup (except if the backup is located on microSD).
Reboot into Fastboot mode (see the header in the F.A.Q. for how to enter it)
Download and unpack on your PC >> this << archive.
In the unpacked archive, go to the folder with your device type (if you have an Indian phone, then in [begoniain], all others in [begonia].
Run !_FLASH_IT_W.bat on Windows or !_FLASH_IT_L.sh on Linux (DO NOT CHANGE THESE SCRIPTS UNLESS YOU WANT TO GET A BRICK!!!)
If something went wrong, check if ADB drivers are installed on Windows, or fastboot packages on Linux.
The necessary images will be flashed and erased, etc., after which the phone itself will reboot into TWRP recovery.
Make the format Data (section Wipe / Wipe, click the Format Data button, then enter "Yes").
Reboot from TWRP to TWRP
Make sure your phone's internal memory is opened in TWRP mode on your PC.
Before starting the ROM installation, it is recommended to take measures to unlock the bootloader and save the critical sections of the phone.
Download and place the archive with the firmware in the internal memory of the phone, as well as Google Apps, if you need them.
Do a Wipe/Cleanup of the "system", "vendor", "cache" and "Dalvik|Art Cache" partitions.
Click Installation / Install and select the archive with the firmware, then click the Add / Add button and select the archive with Google Apps, everything else will be installed and updated automatically.
After installation, reboot again from TWRP to TWRP
Make the format Data (section Wipe / Wipe, click the Format Data button, then enter "Yes").
Reboot into the system and wait for initialization, usually 10 minutes is enough, if the download still fails, reboot forcibly into recovery (long hold volume up + on) and repeat the Format Data operation
After booting the system, perform the initial setup, and then reboot.
TWRP installation:
Before starting the ROM installation, it is recommended to take measures to unlock the bootloader and save the critical sections of the phone.
Save important data, photos, and more.
Download and place the archive with the firmware in the internal memory of the phone, as well as Google Apps if you need them.
Reboot into TWRP if you're not already there (reboot by holding the volume up button).
Wipe/Cleanup the "system", "vendor", "cache" and "Dalvik|Art Cache" partitions.
Click Install/Install and select the firmware archive, then click the Add/Add button and select the Google Apps archive, everything else will be installed and updated automatically.
After installation, reboot from TWRP to TWRP
Do data formatting (section Wipe / Wipe, click the Format Data button, then enter "Yes").
Reboot into the system and wait for initialization, usually 10 minutes is enough, if the download still fails, reboot forcibly into recovery (long hold volume up + on) and repeat the Format Data operation
Once the system has booted, perform the initial setup and then reboot.
Update installation:
USE THESE INSTRUCTION ONLY FOR UPDATING FROM MY PREVIOUS BUILD TO A NEW !!!
Make backups.
Download and place the ROM to the internal memory of the phone
(I do not recommend SD cards, often phones fail because they turn out to be broken)
Reboot in TWRP (vol+ with power button)
Click on Install menu and chose this ROM
After installation click on "Wipe Art/Dalvic" button
Reboot to system
If you have a bootloop, make Format Data in TWRP (all data will be erased).
Rollback to the factory firmware:
Download and unpack any MIUI Fastboot version ROM for begonia or begoniain
Reboot to Fastboot mode (vol- or vol+ with power button)
Run flash_all.bat on Windows or flash_all.sh on Linux
DO NOT USE OTHER ROLLING METHODS IF YOU DO NOT WANT TO GET BRICK !!!
Sources:
ROM: https://github.com/crdroidandroid
Device: https://github.com/TTTT555/device_xiaomi_begonia
Kernel: https://github.com/TTTT555/kernel_xiaomi_begonia
Credits and Thanks:
@DarkJoker360Dev
@SoldatSempai
And to all begonia devs, who is working on an open tree for our device.
Visit official website @ crDroid.net
crDroid Community Telegram
crDroid Device Telegram (links to donations to the author here)
crDroid Device Telegram RU zone
My Telegram
Donate to help crDroid team pay server costs.
XDA:DevDB Information
crDroid, ROM for the Redmi Note 8 Pro
Contributors
TTTT555
ROM OS Version: Android 11
Based On: crDroid 6.x / crDroid 8.x
Version Information
Status: Stable

Notes:
- If you have bootloop after installation, try format data again or to change GAPPS.
- Reboot after a clean install and initial setup so that the BegoniaParts item appears in the settings.
- GAPPS and Google Photo required for G-Cams.
- If you will use Viper FX, then do not forget to enable legacy mode in the application settings.
- If you will use the built-in G-Cams, do not forget to apply configs (three taps between the camshot button and gallery button). If the camera does not find the built-in configs, just reboot the device and try again.
- If you OFF James DSP after ON, reenable Dirac (OFF/ON), if you need it.
- If you OFF G-cam 64 after ON, reboot the device, otherwise bugs are possible.
- ANX cam: If you have problems with a wide angle camera - just turn off the lens distortion correction function, or set the mode to 9/16.
===== 11 May, 2022 =====
* Device tree:
- Based on A-11/12 device trees (R-OSS) by @DarkJoker360
- Packed required firmwares with TWRP into the ROM archive
- Added in-call volumes fix via script
- Rewrote display props
- Rewrote overlays to such as on crDroid v.6.25
- ZRAM fixes and tweaks
- Perfomance and battery optimizations
- Added lost sepolicy denies
- BegoniaParts: Fixed Vibrator's Strenght restore after reboot
- Add G-photo unlim
- MTK Wi-Fi Display injection
- Enable privapp permissions control
- Added MTK Engineer Mode app
- Additions for manifest and compatibility matrix
- Inbuild configs for inbuild G-cams
- Some audio optimizations
- Some init optimizations
- And something else
* Kernel:
- Based on R-OSS kernel tree by @DarkJoker360
- Declare CocoLite kernel
- Add xt_HL module (TTL)
- Add "sioplus" I\O scheduler and make it by default
- Add ALMK
- Some performance improovements
- Some tweaks for support BegoniaParts
- Enforce selinux via cmdline
* BegoniaParts:
- Dirac sound instead MI sound
- Viper with on/off switch (audio)
- James DSP with on/off switch (audio)
- DB FX with on/off switch (audio)
- Switch for some EAS Governors
- Switch for Governor's ratio
- Codec switch
- TCP congestion switch
- Wi-Fi MTK Sta2 mode switch
- Switch for enabling 900 mA via USB
- Switch for disabling MI thermal (if you want)
- Camera switch (ANX, G-cam Burial 8, G-cam true 64 MP)
- V-Sync disabler (if you want)
- Switch for activating debug.sf.latch_unsignaled (if you want)
- Switch for disabling HW overlays (if you want)
- True FPS Info switch
- Gestures section
- 10 point vibration strenght switch
/ Thanks to @7Soldier for help with some features /

i dit a first install of android 11 crdroid. works perfectbut now my twrp is decrypted, ow do i decrypt?

@TTTT555
Is it similar to Rom of VNDK30?
Just that needs the TWRP metadat version to flash , right?

gadmei.tw said:
@TTTT555
Is it similar to Rom of VNDK30?
Just that needs the TWRP metadat version to flash , right?
Click to expand...
Click to collapse
I downloaded the correct metadata and i flashed it with fastboot. Now i can decrypt

Hi.
Does call recording work on this ROM?

reist said:
I downloaded the correct metadata and i flashed it with fastboot. Now i can decrypt
Click to expand...
Click to collapse
i have the same problem. where did u find metadata ?

ariber14 said:
i have the same problem. where did u find metadata ?
Click to expand...
Click to collapse
Go here. And download the 3.4.0.4 metadata and flash it.

How i fix the low quality in videos of instagram???

*edited
Nevermind, thanks

Hi all, anyone using this as their daily driver? Keen to hear how is going. Thanks

Thanks

Thank you for your Work.
Trcamera doesnt Work for me.
In Anx also my front cam doesnt Work.
Any solutions?

The ROM is fast!
NikGApps is working fine to me (I don't know if Google Auto and Google Assistant work because I don't use them).
Trcamera crashes when going to gallery. This fixed when I flashed the omni version of NikGApps. Turns out that the default app for gallery must be Google Photos (AOSP Gallery not working for trcamera)
I don't know about the charging... It says it's it's slowly charging even if I'm using the original fast charger of my phone.
This ROM is awesome nonetheless and thank you devs for keeping up the good work!

Akira10 said:
Trcamera doesnt Work for me.
Click to expand...
Click to collapse
I uninstalled the pre-installed trcamera and installed this version.
Before doing that, flash this buffer fix in Magisk.

d4dave said:
Hi all, anyone using this as their daily driver? Keen to hear how is going. Thanks
Click to expand...
Click to collapse
I've been using this for quite a while now...
mostly stable in everything. Both the Cameras are fine. All features functional. Charging and battery performance all good. The pixel launcher feels buggy with the recents tray so using the crdoid home app. Pretty good.
jeane_uglypish said:
The ROM is fast!
NikGApps is working fine to me (I don't know if Google Auto and Google Assistant work because I don't use them).
Trcamera crashes when going to gallery. This fixed when I flashed the omni version of NikGApps. Turns out that the default app for gallery must be Google Photos (AOSP Gallery not working for trcamera)
I don't know about the charging... It says it's it's slowly charging even if I'm using the original fast charger of my phone.
This ROM is awesome nonetheless and thank you devs for keeping up the good work!
Click to expand...
Click to collapse
The assistant is working fine with full functional voice recognition. But changing the device fingerprint to something else creates a problem with Ok google because The assistant 2.0 or later gets installed and something happens. ( I haven't used android auto too so no comment).
I also flashed nikgapps full package and everything is fine.
The slow charging problem that u have is not happening with me. What happens is that at the starting it shows charging slowly. Then after a few seconds or a minute it starts charging rapidly.

@TTTT555 do you really need to wipe the internal storage ? It's kinda lame to have to copy everything, couldn't you just wipe data ?

Shafin2315 said:
I've been using this for quite a while now...
mostly stable in everything. Both the Cameras are fine. All features functional. Charging and battery performance all good. The pixel launcher feels buggy with the recents tray so using the crdoid home app. Pretty good.
Click to expand...
Click to collapse
You mentioned "both the cameras are fine", do you mean the rear and front camera?

thank you very much

kirinin said:
You mentioned "both the cameras are fine", do you mean the rear and front camera?
Click to expand...
Click to collapse
Oh, no no. I meant trCam and AnXcam app...both are working pretty fine so far. My rear and front cam works fine anyways. I have the old device. I am not on the new one.. I think I know what ur trying to say. Ur front cam probably doesn't work ri8? I'm pretty sure in most of the threads people said that the new device kernel hasn't been released and new cam isn't responding in many roms because of that. Honestly i don't think there's any workaround for that unless the kernel is officially released.

[ROM][12L]LineageOS 19.1 for Realme X2 Pro (RMX1931/CN)[UNOFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community-built, aftermarket firmware distribution of Android 6, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Audio
Bluetooth
Camera
Display
Encryption
Face unlock
Fingerprint scanner
GPS
NFC
RIL (VoLTE calls, SMS, Data)
Sensors
Video Playback
Wi-Fi
Device specific features:
Smart Charging. check Settings -> Realme Settings
DC dimming (flicker free feature). check Settings -> Realme Settings
sRGB mode. check Settings -> Realme Settings
Game mode (touch boost & performance mode). check Settings -> Realme Settings
Buttons/toggle for display hz (forced, 6hz & 90hz). check Settings -> Realme Settings
Screen off gestures. check Settings -> system -> touchscreen gestures
Ambient gestures (AOD, Pickup, handwave & pocket). check Settings -> Display -> Lockscreen display -> Ambient display
Known issues:
Disabled Encryption (For a while until we get a newer recovery)
Some of the Realme settings features (will be fixed sooner or later)
Maybe something else can be found as well
Most of the lineage features maybe buggy or probably won't work, LineageOS team is working on it
SELinux is permissive
Report bugs:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel (Ignore):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
DO NO POST BUGS WITHOUT LOGS AND PROPER STEPS TO REPRODUCE THE ISSUE
DO NO POST BUGS IF YOU ARE USING CUSTOM KERNEL or ANY MODULE
Follow Instructions Carefully otherwise you will get error :
Reboot to recovery (Recommended recovery listed in downloads section)
Format data, Wipe cache & dalvik-cache
Flash ROM, Gapps 12 arm64 together (Download Gapps from downloads section)
Done-Reboot Now
Enjoy the clean Rom
Downloads:
ROM:
Realme X2 Pro (RMX1931) (gapps variant)
RECOVERY:OrangeFox A11
Notes:
* Use the recommended recovery
* Use only pattern for lockscreen, rest methods will cause issues with recovery failing to decrypt data
* Incase if you're stuck on recovery logo, you'll have to format data using fastboot,
Code:
fastboot -w
Source code:
ROM: https://github.com/ForkLineageOS/android
KERNEL: https://github.com/HyperTeam/android_kernel_realme_sm8150/tree/lineage-18.1
CREDITS:
LineageOS
Team Hyper
CAF
Testers (Sorry, I couldn't mention everyone here)
Special thanks to Donors for donating me the device :highfive:
DONATIONS:
Please consider donating if you enjoy my work. It will be used for server expenses, Ty
Paypal donation link: https://www.paypal.me/karthick0698
Patreon: https://www.patreon.com/karthick111
UPI: [email protected] (do mention device name while donating) PM for any other mode of transaction

Reserved

Thanks, gonna test it

Hi.
I test the rom and I have a problem with it. When I try reboot to TWRP I can´t. It stand in the TWRP logo and I can´t start no Lineage no TWRP.
I read that it´s a problem with Android 12 and TWRP.
Thanks for your work.

AnEsLo said:
Hi.
I test the rom and I have a problem with it. When I try reboot to TWRP I can´t. It stand in the TWRP logo and I can´t start no Lineage no TWRP.
I read that it´s a problem with Android 12 and TWRP.
Thanks for your work.
Click to expand...
Click to collapse
From notes in OP:

"Android System Intelligence app" crashes continually (every five minutes approx)
Tested multiple times with lineage-19.0-20211029-UNOFFICIAL-RMX1931.zip (downloaded from sourceforge webpage) with both NikGApps (omni, stock and full) and FlameGApps (basic, full). All partitions previously wiped from twrp and data formatted (clean installation). Personal data and apps restored from google backup. I've read in other forums it happens when receiving notifications. Could'nt confirm. Problem ceases disabling the app.
Great job and thanks very much for the rom!!!

jdjta said:
From notes in OP:
View attachment 5449145
Click to expand...
Click to collapse
It works!! Thanks a lot!!

1)Finger print scanner not working
2) you tube video is stuttering i don't know why
3) face unlock also not showing
Waiting for these changes to get fixed other wise great rom!

hunzala1312 said:
1)Finger print scanner not working
2) you tube video is stuttering i don't know why
3) face unlock also not showing
Waiting for these changes to get fixed other wise great rom!
Click to expand...
Click to collapse
1. fingerprint works, did you jump in straight from stock rom.. if yes, which version ?
2. attach logs of the youtube issues
3. face unlock is an addon, it cant be an issue at all (if it gets ported, it will be added)

Safety net passes with magisk installed?

Button inverting doesn't seem to work

shining_sk said:
Safety net passes with magisk installed?
Click to expand...
Click to collapse
Yes
shining_sk said:
Safety net passes with magisk installed?
Click to expand...
Click to collapse

Tested.
Beside some minor bugs it's overall good but the fact that it doesn't have signature spoofing permission is really annoying. I tried to use FakeGapps Xposed Module and it doesn't seem to work correctly (LSposed seems not to work) so it's impossible to get notifications using MicroG.
Could you please add support for signature spoofing?

Good enough to use as daily driver? I just downloaded 18.1 but should I use this?

So i noticed 2 things,
1) the lockscreen rotates if auto-rotate is on even if the rotate lock screen is turned off.
2) i dont get any vibration, in LOS 18.1 (your rom) it worked fine, altough i tweaked it a lil with franco kernel manager to be a lil bit more forcefull. It works while booting and while in twrp, just not while in the os. i tried testing it with an app where it didnt work either.
If i should upload a log would i just use matlog for example, and do you want it tested with notifications or with an app?
Im currently running the linked LOS img, the latest NikGapps Core and the latest magisk canary build, no further modifications on the system. For installing i followed the instructions besides using the latest official twrp build instead of the provided OrangeFox Recovery (i had problems mounting the data partition with that one) and i came from your latest LOS 18.1 build without formating the system partition or reinstalling realme ui

Thanks for all the great work. Can we expect a new release soon? Would love to wait for some initial bug fixes and new features such as face unlock.

Can't wait to try this ROM! I'm too busy lately to try and flash it, but i will soon! Keep up the good work

I can confirm that "Android System Intelligence app" keeps crashing an disabling it solves the issue for now. I think the confusion around Face Unlock not working stems from the fact that it is listed as a working feature in the original post. Also I seem to be limited to 60hz and smartcharge not working but I assume those will get fixed with the other Realme settings at some point. Other than that it is looking good, thanks for the great work!

Thanks for your instruction.
I have cleaned data, system and flashed this lineageOS and only faced the error "Failed to mount /metadata partition". NikGApps installation is OK.
Now, I'm stuck at Fastboot + OrangeFox recovery, I cannot boot into system.
Could you please help that what I should do for my x2pro to boot to the system?
Thanks

Can anybody else confirm that long press power button to turn on flashlight does not work? I can enable it under Settings - System - Buttons but it does not work.

Development [ROM][13.0][UNOFFICIAL] PixelExperience for Xiaomi MIX 4

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Xiaomi MIX 4 [odin]
What is this?
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 13
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
Face unlock
NFC
Lights
Sound/vibration
Known issues
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Downloads available here
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 13.0
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
Build author/Device Maintainer: Inkypen
Kernel Source code: https://github.com/Inkypen79/kernel_xiaomi_odin

Official TWRP thread:
https://forum.xda-developers.com/t/recovery-11-official-teamwin-recovery-project.4374117
My unofficial TWRP build:
Updated to handle A12+ encryption.
https://sourceforge.net/projects/xiaomi-odin/files/odin-twrp-3.7.0_12-1.img/download
My unofficial OrangeFox recovery:
Updated to handle A12+ encryption.
This is in the form of a flashable zip, boot into TWRP first and then install/sideload
https://sourceforge.net/projects/xi...eFox-A12.1-R11.1-Unofficial-odin.zip/download
Installation:
Install TWRP and reboot to recovery
Either copy zip to internal storage and install OR use adb sideload
Format data (wiping is not sufficient, formatting requires you to type "yes")
Reboot
Important notes:
Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
MIUI 13 firmware is included in ROM zip, no need to flash it seperately.
Other notes:
The default camera in these builds is ANX camera. Everything is working (including 108mp mode) apart from HDR/Slowmo video recording.

Awesome!

求快更新，谢谢

Quick update

The current version 0517 is great, no obvious bugs, the system is quite stable, minor issues with the ANX camera can wait for subsequent updates.
If any newcomer has finished brushing this rom, I would like to give some advice on how to improve the battery life.
After brushing.
1. modify the wifi detection parameters, you can solve the problem that when there is no WIFI outside the wall, the system will automatically switch to the phone network from the WIFI inside the wall.
adb shell settings put global captive_portal_mode 0
adb shell settings put global captive_portal_https_url https://www.google.cn/generate_204
2. it is recommended to install fridge (icebox), black threshold type of software, suppress the domestic software's self-start and background behavior, standby time will be significantly improved. I installed icebox, must be installed after the brush, through the device owner can be installed successfully, do not need to root. if you have been using a period of time, even if you delete a variety of accounts, you can no longer through the device owner way, at this time, only recovery restore the original factory, can be installed successfully.
3. display settings, select 60HZ refresh rate, and then install S20 Refresh Rate Control, mix4 can be used, set to 90HZ refresh rate, as opposed to 120HZ, in the experience of smooth picture at the same time, can save a little is a little.
btw, mix4 is really power hungry. 888 is the Fire Dragon.

Thank you! This Rom Runs very smooth, but how i get he Pedometer works ?

Unfortunately I am unable to install this rom. I'm installing twrp and going to recovery. The computer does not see the phone to be able to throw the rom.
At the moment, I have a stable miui 13

kasia19 said:
Unfortunately I am unable to install this rom. I'm installing twrp and going to recovery. The computer does not see the phone to be able to throw the rom.
At the moment, I have a stable miui 13
Click to expand...
Click to collapse
Try it this way:
1 First enter FASTBOOT mode
2 Run: fastboot boot twrp-3.6.1-odin.img
3 When the TRWP page appears, Advanced, ADB Sideload
4 Run: adb devices, if it goes well, you can see your mix4 now
6 Run: adb sideload PixelExperience....zip
Enjoy the ROM~

Unfortunately, the message is still present in the photo

In my Case, this was the only possible Methode..
1. Backup all Ur Data
2. Reflash MIUI V12 Fastboot
3. Set Up MIUI without Password Finish.
4.Settings ->developer Mode ->secure Boot disable.
5. Reboot Fastboot and flash Twrp.img via Fastboot Boot Twrpingname.img
6. Mtp activate and Transfer the Rom and the orange fox Recovery
7. Flash Orange Recovery
8. Reboot in Orange Recovery( it does auto load)
9. Flash the Rom
10. Delete Data With "yes"
11. Reboot
12. Finish
In my Case the only possible way

kasia19 said:
View attachment 5635055
Unfortunately, the message is still present in the photo
Click to expand...
Click to collapse
Just Developer Mode and Select ADB via USB Enable

Neosux said:
In my Case, this was the only possible Methode..
1. Backup all Ur Data
2. Reflash MIUI V12 Fastboot
3. Set Up MIUI without Password Finish.
4.Settings ->developer Mode ->secure Boot disable.
5. Reboot Fastboot and flash Twrp.img via Fastboot Boot Twrpingname.img
6. Mtp activate and Transfer the Rom and the orange fox Recovery
7. Flash Orange Recovery
8. Reboot in Orange Recovery( it does auto load)
9. Flash the Rom
10. Delete Data With "yes"
11. Reboot
12. Finish
In my Case the only possible way
Click to expand...
Click to collapse
Thank you for your help. I see the rom does not support 5G network

Edit seems to Work so far..

New build with June security patch is up.
Anyone having problems installing should check the extended update instructions in my LineageOS thread
[ROM][13.0][UNOFFICIAL] LineageOS 20.0 for Xiaomi MIX 4
LineageOS is a free, community built, aftermarket firmware distribution of Android 12 (S), which is designed to increase performance and reliability over stock Android for your device. #include /* * Your warranty is now void...
forum.xda-developers.com
kasia19 said:
Thank you for your help. I see the rom does not support 5G network
Click to expand...
Click to collapse
It most definitely supports 5G, I have 5G service on my device right now lol. Check your SIM card, I had a bug report about 5G working on MIUI but not on my ROMs, turns out that user didn't have a 5G compatible SIM card and MIUI was fake reporting 5G support.

What is updated with this release？

Which is the best way to Update this Rom without delete Storage?
Just sideload ZIP and flash?
Thanks

I've built TWRP 3.6.2 A12 branch and decryption is working. Untested other than making sure it boots and decrypts internal storage correctly. Use fastboot boot to run it and Advanced/Flash current TWRP to actually install it. If you find any bugs feel free to report them but bear in mind the whole TWRP A12 branch is currently WIP.
https://sourceforge.net/projects/xiaomi-odin/files/odin-twrp-3.6.2_12-0.img/download

I've been using this ROM for about a week. This is the ROM that should had been included as stock for this phone!!! Great job!!

New builds are up. Download
Changelog:
Kernel version 5.4.203
July security patch
Fixed Wifi Display
Fixed physical screen size properties (this caused tiiny images in apps like reddit)
Fixed Netflix not detecting widevine L1 correctly
Added high touch poll rate for you gamers out there
Enabled multi threaded render engine (improves UI smoothness)
Enabled some power saving tweaks for Wifi/Bluetooth
Some other minor tweaks and improvements
Also got an updated TWRP A12 build for you here: Download
Touchscreen now works properly on MIUI based ROMs
TWRP settings are now saved properly and are persistent across reboots
TWRP settings are now saved in /data/recovery rather than /sdcard/.twrps (some apps look for the .twrps folder and then declare your device is rooted even if it isn't)

Better Mobile App

welcome