GOOD AFTERNOON
I PURCHASED A SAMSUNG GALAXY PLAYER 5.0 US VERSION AND ATTEMPTED TO ROOT IT. I UNLOCKED THE BOOTLOADER, THEN ATTEMPTED TO ROOT THROUGH ODIN 1.7.0. THE ATTEMPTED ROOT BRICKED THE PHONE AND GAVE THE "PHONE-YELLOW TRIANGLE-PC" ICON, AS SHOWN IN THE PHOTO.
I FOUND SEVERAL tar FILES, AND OTHER ASSORTED FILES AND ATTEMPTED TO UNBRICK THE GALAXY PLAYER. FOR SOME REASON ODIN DOES NOT READ THE DEVICE AND NOTHING HAPPENS WHEN USING THE pit FILE. WHAT STEPS SHOULD I TAKE TO UNBRICK THE DEVICE.
I READ ABOUT HEIMDALL SUITE, BUT THIS IS 2021, THAT SOFTWARE DOES NOT WORK ON MY SURFACE BOOK 2 EVEN AFTER INSTALLING VISUAL STUDIO C+++ 2010
Gdemetrios2020 said:
GOOD AFTERNOON
I PURCHASED A SAMSUNG GALAXY PLAYER 5.0 US VERSION AND ATTEMPTED TO ROOT IT. I UNLOCKED THE BOOTLOADER, THEN ATTEMPTED TO ROOT THROUGH ODIN 1.7.0. THE ATTEMPTED ROOT BRICKED THE PHONE AND GAVE THE "PHONE-YELLOW TRIANGLE-PC" ICON, AS SHOWN IN THE PHOTO.
I FOUND SEVERAL tar FILES, AND OTHER ASSORTED FILES AND ATTEMPTED TO UNBRICK THE GALAXY PLAYER. FOR SOME REASON ODIN DOES NOT READ THE DEVICE AND NOTHING HAPPENS WHEN USING THE pit FILE. WHAT STEPS SHOULD I TAKE TO UNBRICK THE DEVICE.
I READ ABOUT HEIMDALL SUITE, BUT THIS IS 2021, THAT SOFTWARE DOES NOT WORK ON MY SURFACE BOOK 2 EVEN AFTER INSTALLING VISUAL STUDIO C+++ 2010
Click to expand...
Click to collapse
IDK if it helps in your situation, but here is a guide how to root your device in an easy way:
Rooting the Galaxy Player (All Versions) (Windows, Mac, Linux)
Hello All, I just bought a Galaxy Player yesterday and wanted to root. Okay, I thought, to XDA I go. It seems the general consensus here is to use SuperOneClick. While the SuperOneClick method may work for most people running Windows, it's...
forum.xda-developers.com
To unbrick you need to boot the device either into recovery or download mode.
An alternative to flash firmware files to Samsung devices is Odin (for windows).
Related
Hello Everyone,
Firstly, I need to say that as a previous owner of an original droid, I was able to root it with no problems on the first go around. However, as a new owner of a Samsung Galaxy SII I am finding root a real challenge.
I have no problems getting into download mode and so on....I have successfully placed the clockworks rom onto the phone with again no problems and I have all the drivers working properly. I guess this is where I am obviously an idiot....because I start the Super One Click and it gets to Step 6 and then stops. I unplug the USB....click the debugg off and then back on and reconnect my USB like directed by many posters. However, in my case it will not continue on and finish the install.....
I reboot and do get the small triangle on boot up ( not that I care too much about that really...do have a jig on order however) but I simply can't seem to get it to root.
Again I have followed all the posts and guides for unplugging, unchecking and rechecking the debugging and then plug back in the USB and still nothing.
Phone works fine....everything works...love the phone...just seems puzzling to me. I have Odin 1.82, I have SuperOneClick 2.1.1 and like I said installed the .tar fine to the phone with no worries....just cant get it to root.
Any advice?
"....I have successfully placed the clockworks rom onto the phone with again "
Do you mean kernel with clockwork recovery ? Because if so,the kernel suppoused to be rooted already.
I firs downloaded the below file, Then downloaded ODIN 1.82 and all associated samsung drivers. I also downloaded SuperOneClick 2.1.1.
The instructions were to load the .tar file on first which I did successfully. When I go to the final step and use SuperOneClick to ROOT the phone is where the problems happens. I can't get past step 6 and unchecking and rechecking the debugging box at step 6 does not help.
SGH-I777_ClockworkMod-Recovery_5.0.2.3.tar
Try an alternative way I used the one described on the CyanogenMod-wiki. Worked like a charm for me.
Sent from my GT-I9100 using XDA App
That tar file says its for sgh- I777
Where did you get it from?
I'm not familiar with this method,i gues because it's AT&T device ?
I believe I downloaded it from this site. It was part of a guide to rooting the Galaxy S2 phone. It had all the files for download in links at the very top of the page but to be honest I have looked at so many pages now I can't remember where I got it on here.
TheElectricalGuru said:
I believe I downloaded it from this site. It was part of a guide to rooting the Galaxy S2 phone. It had all the files for download in links at the very top of the page but to be honest I have looked at so many pages now I can't remember where I got it on here.
Click to expand...
Click to collapse
Check your pm
TheElectricalGuru said:
I believe I downloaded it from this site. It was part of a guide to rooting the Galaxy S2 phone. It had all the files for download in links at the very top of the page but to be honest I have looked at so many pages now I can't remember where I got it on here.
Click to expand...
Click to collapse
Man,and again this method for AT&T Galaxy only... if you have it so it's different thread in the forum.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Oh dear, what model of the Samsung Galaxy S II are you using? If it's the GT-i9100(the international model) then you've used the wrong .tar file. Obviously the "SGH-I777_ClockworkMod-Recovery_5.0.2.3.tar" file is for the AT&T S II.
Do pay close attention to the model number.
Hi, i am new here. I've had a galaxy tab 10.1 since last year but i never root it because i was a bit scared about that. i decided to root it now and follow the steps of this guide http://forum.xda-developers.com/showthread.php?t=1239185
but when i run odin and choose the recovery .md5 and hit start it doesnt complete it get stuck in recovery.img and after that i had to do a manual reset of the tab. I have done that like 3 times now and i want to know if anyone has a solution for that.
JC
Rooting HC
@jc
Have you the correct Samsung Drivers? Also all the steps must be followed exactly one by one without any shortcut.
You could also try rename the .tar.md5 to only .tar as I read elsewhere that this worked in some case.
Hope this helps
SS
===
Try re-downloading the files
I am going to try that tonight. Thanks guys i will let you know
You can root with Stock recovery, no need to flash one
Sent from my HTC HD2 using XDA App
yeah i downloaded the drivers, and even change the extension name. but odin still freezes in recovery.img. i bought my tab last august in the usa. It's HC 3.2 with touchwiz and the serial number is R63B632003L. i donĀ“t know if there is another samsung driver or another version of odin for that. I'd really like to root my tab. thanks
First thing you should know is what model of the tab 10.1 you have. There are several variations. Setting, about, model number.
So i have never had so many problems with a phone, but this would be the first one a customer tried doing on their own.
So he downloaded the latest file from sammobile for his SCH-i605. he used odin to flash and was stuck in boot loop. I have tried many different methods to try and get his phone working. I have tried all of the alternate method files to no avail. the current file i have flashed is the VRAMC3 restore out of all the files i have tried this is 1 of very few that make it through the write. All the others fail on sboot. It currently sits on the unauthorized verizon blah blah blah. Its had no recovery since he brought it over and havent been able to get recovery back. All i have access to is download mode, some firmwares give me the kies screen talking about an error but cant get it seen in kies versions 2 and 3.
If you need any other info just ask, if i know the answer i will give it. He has no clue as to what OS he was on or even what the ROM that was on there.
BCityModz said:
So i have never had so many problems with a phone, but this would be the first one a customer tried doing on their own.
So he downloaded the latest file from sammobile for his SCH-i605. he used odin to flash and was stuck in boot loop. I have tried many different methods to try and get his phone working. I have tried all of the alternate method files to no avail. the current file i have flashed is the VRAMC3 restore out of all the files i have tried this is 1 of very few that make it through the write. All the others fail on sboot. It currently sits on the unauthorized verizon blah blah blah. Its had no recovery since he brought it over and havent been able to get recovery back. All i have access to is download mode, some firmwares give me the kies screen talking about an error but cant get it seen in kies versions 2 and 3.
If you need any other info just ask, if i know the answer i will give it. He has no clue as to what OS he was on or even what the ROM that was on there.
Click to expand...
Click to collapse
If the person tried to ODIN flash the latest firmware version for the SCH-I605, then it would have been VRUFND7 4.4.2 Kit Kat. (Unfortunately... once you install 4.3 or 4.4.2 on our Note 2's, both of those firmwares lock the bootloader with no current do it yourself method to unlock it. You can't successfully flash a prior Android version onto the phone after you upgrade past 4.1.2 either because of the locked bootloader).
Check out Droidstyle's Restore Guide here: http://forum.xda-developers.com/showthread.php?p=34891181. You will probably need to flash the pit file with the firmware to get it to Odin flash successfully. You can grab the SCH-I605 16gb Pit file from the guide.
Even though Droidstyle's guide is a little old, it is still the same steps for restoring to 4.4.2, so if you follow the guide (section 1b), it should help you fix the phone.
He doesn't have a link for the 4.4.2 firmware, but you can grab it from Sammobile. It looks like the Sammobile site is currently down for maintenance, but the link is here: http://www.sammobile.com/firmwares/download/30950/I605VRUFND7_I605VZWFND7_VZW.zip/
If you're using an older ODIN, then I would probably try to use a newer Odin version like 3.0.9 or 3.10.0. Make sure you run it with Administrative privileges and disable antivirus programs.
Good luck!
mattnmag said:
If the person tried to ODIN flash the latest firmware version for the SCH-I605, then it would have been VRUFND7 4.4.2 Kit Kat. (Unfortunately... once you install 4.3 or 4.4.2 on our Note 2's, both of those firmwares lock the bootloader with no current do it yourself method to unlock it. You can't successfully flash a prior Android version onto the phone after you upgrade past 4.1.2 either because of the locked bootloader).
Check out Droidstyle's Restore Guide here: http://forum.xda-developers.com/showthread.php?p=34891181. You will probably need to flash the pit file with the firmware to get it to Odin flash successfully. You can grab the SCH-I605 16gb Pit file from the guide.
Even though Droidstyle's guide is a little old, it is still the same steps for restoring to 4.4.2, so if you follow the guide (section 1b), it should help you fix the phone.
He doesn't have a link for the 4.4.2 firmware, but you can grab it from Sammobile. It looks like the Sammobile site is currently down for maintenance, but the link is here: http://www.sammobile.com/firmwares/download/30950/I605VRUFND7_I605VZWFND7_VZW.zip/
If you're using an older ODIN, then I would probably try to use a newer Odin version like 3.0.9 or 3.10.0. Make sure you run it with Administrative privileges and disable antivirus programs.
Good luck!
Click to expand...
Click to collapse
Ive tried that one as well and almost all the files in that thread. When he flashed the 4.4.2 firmware the phone wouldnt boot all it did was flash the Note 2 screen. Ive used the pit file as well with no luck. Using the top file on the link fails almost instantly, VRAMC3 writes and passes but will not boot, shows the unauthorized firmware screen.
I'm wondering if he flashed a firmware onto the phone that was from a different carrier like ATT or something. If so, he may have messed up the phone so bad that it might need jtag to repair it.
You've probably already tried all the normal Odin tips like using a different usb cable, different ports on the computer (usb 2.0 port is recommended), etc... so I won't go over all those.
I've never tried it and don't know if I'd recommend it, but I recall reading some threads a while back where someone discussed trying the Nand Erase function in Odin.... (again.... I'm not saying to do that... but you may want to research it to see if it might be an option if nothing else works).
I've also read where people say that they've used Cygwin to create custom tar files... then they ODIN installed each of the separate partition files (e.g. recovery, boot, modem, system, etc...), onto their Samsung device.
I'm not knowledgeable enough to offer guidance with Cygwin and I'm not sure if either of these ideas would work, but I just thought I'd throw them out there for the sake of brainstorming for ideas. Maybe someone will respond to your request who has more knowledge and ideas.
I wish you luck with getting it fixed.
Hi, I am attempting to root my Samsung Galaxy Grand Prime - SM-G530FZ, and the guides I have found say to use Odin 3.10.7.
Only problem is, I'm running Windows XP. It seems Odin 3.10.7 is the only one that no longer works with XP, and I haven't been able to find a way to make it work.
Is the version 3.10.7 the version I need to specifically use to use to root my phone, as it said in the guide, or can I use any later version of Odin?
Xdegenerate said:
Hi, I am attempting to root my Samsung Galaxy Grand Prime - SM-G530FZ, and the guides I have found say to use Odin 3.10.7.
Only problem is, I'm running Windows XP. It seems Odin 3.10.7 is the only one that no longer works with XP, and I haven't been able to find a way to make it work.
Is the version 3.10.7 the version I need to specifically use to use to root my phone, as it said in the guide, or can I use any later version of Odin?
Click to expand...
Click to collapse
Never mind, I figured out it can be done with 3.10.6. You just need to make sure Windows XP is running Service Pack 2 or 3.
Pass. Success..
Hi, I have an old Samsung Galaxy Tablet 10.1 SCH-i925 that is not rooted and still has the original OS (Android 4.1.2) on it.
I'm trying to update to Lineage OS 16.0 using Odin, but have not been able to. I've tried several versions of the Samsung USB Driver for Mobile Phones, and several versions of Odin, as well as different USB cables. Does anyone have any advice for what I could do next? I realize this may be a basic question but I've sunk 20+ hours into this and am lost.
smadug2 said:
Hi, I have an old Samsung Galaxy Tablet 10.1 SCH-i925 that is not rooted and still has the original OS (Android 4.1.2) on it.
I'm trying to update to Lineage OS 16.0 using Odin, but have not been able to. I've tried several versions of the Samsung USB Driver for Mobile Phones, and several versions of Odin, as well as different USB cables. Does anyone have any advice for what I could do next? I realize this may be a basic question but I've sunk 20+ hours into this and am lost.
Click to expand...
Click to collapse
You install custom ROM via custom recovery, for example TWRP.
ze7zez said:
You install custom ROM via custom recovery, for example TWRP.
Click to expand...
Click to collapse
Thanks for the prompt reply! I was under the impression that Odin was required to install TWRP in the first place. Is there another way to transfer TWRP to the device and access it through the bootloader mode on the tablet ("power + volume up") ?
smadug2 said:
(...) I was under the impression that Odin was required to install TWRP in the first place.(...)
Click to expand...
Click to collapse
Of course you did, but you wrote:
"I'm trying to update to Lineage OS 16.0 using Odin"
You must use the exact version of Odin that is recommended for your model, which is 3.13.1. I use The Muppets version.
There are no Samsung drivers other than these:
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
ze7zez said:
Of course you did, but you wrote:
"I'm trying to update to Lineage OS 16.0 using Odin"
You must use the exact version of Odin that is recommended for your model, which is 3.13.1. I use The Muppets version.
There are no Samsung drivers other than these:
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Click to expand...
Click to collapse
Ok! I downloaded Samsung Android USB Driver for Windows v1.7.59 and am using the muppets version of Odin (3.13.1), and it still fails to transfer any files. I tried with an auto-root .tar file and TWRP. I've attached the Odin window output for reference:
Oh, this is for a galaxy *note* tablet, not the thing I have. You may want to update the post title to add that detail. I had to google the SCH-i925 to be sure...
smadug2 said:
Ok! I downloaded Samsung Android USB Driver for Windows v1.7.59 and am using the muppets version of Odin (3.13.1), and it still fails to transfer any files. I tried with an auto-root .tar file and TWRP. I've attached the Odin window output for reference:
Click to expand...
Click to collapse
I don't understand why you want to flash something for n8010 when you have a tablet from Verizon?
Show the tablet property screen with hardware and firmware information.
Have you unlocked the bootloader?
ze7zez said:
I don't understand why you want to flash something for n8010 when you have a tablet from Verizon?
Show the tablet property screen with hardware and firmware information.
Have you unlocked the bootloader?
Click to expand...
Click to collapse
I read in various other places that the auto-root file and TWRP file for the n8010 works for the Verizon version (SCH-i925) since it's essentially the same device. I may be wrong though...I cannot find a specific TWRP file online for this version of the 10.1.
I have attached the device details to this post.
Unfortunately, extensive searching online indicates that there is no easy way to unlock the bootloader for the sch-i925: https://forum.xda-developers.com/t/...root-jailbreak-recovery.3400894/post-79789473
Any advice on these various issues would be greatly appreciated!
smadug2 said:
(...)
Any advice on these various issues would be greatly appreciated!
Click to expand...
Click to collapse
Without an unlocked bootloader, you probably aren't flashing TWRP or a custom ROM. In stock ROM you can root easily, even with Towelroot.
There's nothing more I can't help, so as not to harm.
Ok well thanks for your help!