Hi,
I bought a Nextbook Premium 8 SE, model: "next8d12f", the device contains core AML8726-MX.
I tested different procedures such as root device but managed to me only to load the firmware from Prestigio 5580c here but could not turn on wifi, so I flash firmware Next8HD8G but a here too wifi did not work and still poorly functioning motion sensor.
Finally, after the last restart from recovery device not start and now does not turn on at all, just a black screen and end.
Only what indications are there any hope, its that, when I plug the USB cable to the PC the Device Manager recognizable M6-chip or an unknown device .... I downloaded many drivers for android_winusb, rockusb, adb etc. but do not know which one to choose, when the device will not boot or image flashes
Can you please advise how to put this device to the original state, I do not know how to end and that the dead / frozen up of devices, doing so in advance thank you very much for any help ... thanks
P.S. Sorry for my english, this post was created with the assistance of Google Translator
Hi guys,
I just bought two brandnew Cube U27GT S (MTK 8127) tablets and tried to install a custom rom. Unfortunately the tab hard bricked while trying to flash it with SPFT. Now I can´t turn on the tab anymore - all black. I even can´t open the recovery mode and Win 7 doesn´t found the tab anymore, it shows unknown device in the device manager!?
Meanwhile I deinstalled all MTK drivers with usbdeview and installed them again with the help of the second tab. But it has no effect of the damaged one it´s still an unkown device.
Maybe anyone has an idea how to unbrick it? Would be great to get any help! :crying:
No hope anymore?
I have the same problem can only get into recovery, factory reset does seem to do anything still hangs on boot, looks like I need to update via sdcard?
Hi guys:crying::crying::crying:, I need to revive my tablet, try to make it root and then I do not boot, try to flash it and use a ROM Archos-101d-Neon tablet, after that no longer shows signs of life, but flashtool still recognizes it. I need the original ROM of the tablet pixi 3 (10) and to see if I can rescue her. If someone can provide me the ROM or if you can help me solve the problem I would appreciate it. I'm waiting for any help. Greetings.
alvarmat said:
Hi guys:crying::crying::crying:, I need to revive my tablet, try to make it root and then I do not boot, try to flash it and use a ROM Archos-101d-Neon tablet, after that no longer shows signs of life, but flashtool still recognizes it. I need the original ROM of the tablet pixi 3 (10) and to see if I can rescue her. If someone can provide me the ROM or if you can help me solve the problem I would appreciate it. I'm waiting for any help. Greetings.
Click to expand...
Click to collapse
I have the same problem, I readed in other posts you can use oficial program "Mobile Upgrade S 4.5.4" of alcatel to try revive your tablet. In my case it looks like working, downloaded some files but later the program dont reconogize tablet in the step 3/4 and tablet keep in boot loop.
Please someone with stock room upload it to mega or some filehostin
deceiver7 said:
I have the same problem, I readed in other posts you can use oficial program "Mobile Upgrade S 4.5.4" of alcatel to try revive your tablet. In my case it looks like working, downloaded some files but later the program dont reconogize tablet in the step 3/4 and tablet keep in boot loop.
Please someone with stock room upload it to mega or some filehostin
Click to expand...
Click to collapse
alcatel one touch pixi 3 (10) WI-FI ? or 3G ?
on 3G (9010) a lot of information
very necessary for wi-fi (8079).have on hand?
download this official updater: https://1drv.ms/u/s!AvUqW-s0ZKJvhVoy4gT1Oiynk8Av choose your model (mine was 8079 - made by TCL as stated in the box).
Hello
@calculo. The program doesn't recognize tablet in the step 3/4 and tablet keep in bootloop. I need the Stock Rom to be able to use it with Sp Flash tool. If you could upload it, I would appreciate it.
Problem solved
I found the software I was looking for (root-alcatel-one-touch-pixi-34-official-t3193624 / page258), Use Sp Flash Tool to format and update, then recharge the battery, then recharge the battery connecting a charger directly on the battery output cables and after all that my tablet resurrected. Thanks for everything.
Guys, need help pls. Got one Pixi 3 3G 10 dual sim device (9010X), went to flash it via SP tool, but it seems I bricked it. Possibly with wrong FW. Now tablet is dead, nothing on screen, but on USB connetion, computer play sound wheni iI connect it . SP and AutoUpdater tools won't recognize it. Any hope here? thanks
EDIT: I got it again recognazible by SPFT by removing the battery, It is flashable again, need correct FW, but can't find it anywhere
Guys need help please! ?
My tablet is dead! "Pixi 3 3G 10 device (8970)" nothing on screen, but on USB connetion, computer play sound when i connect it and receive a message "USB device not recognized" . SP won't recognize it. Any hope here? Thanks
Pixi 3 3G 10 device (8970)
After i tried to upgrade firmware with Mobile Upgrade S Gotu2 it didnt even pass second task only said network error my "Pixi 3 3G 10 device (8970) has nothing on screen and i recive message "USB device not recognized on my computer.
I tried with sp flash tool installed the mtk driver on win7 and on win 10 but it doesnt recognize the usb can someone pls post how to properly install drivers for sp flash
Any help is appreciated
caculo said:
download this official updater: choose your model (mine was 8079 - made by TCL as stated in the box).
Click to expand...
Click to collapse
Thank you, Thank you, Thank you ...... This worked for me after 8 hours of trying to fix my hard bricked pixi phone!:good:
Yep, I have managed to brick my pixi 3 (10). I have tried to root my device, but Kingroot failed.
Then I've tried to TWRP (https://forum.xda-developers.com/showpost.php?p=67953659&postcount=1944) and my device went to bootloop it self with garbled screen (while connected on PC i've heard device connected - device disconnected sound constantly)
And finally I've tried with this https://forum.xda-developers.com/showpost.php?p=72854696&postcount=4 and device stopped with bootloop immediately after I've clicked on Yes in dialog "To begin please confirm that your device's battery is fully charged..."
But it has stopped to boot at all, and now when I connect device to my PC I get message "USB device not recognized"...
Is there any hope, or I should use this tablet as a frisbee?
hola quisiera q alguien me alludara a saver si la rom de la tablet pixi 3 10 8080 es el mismo sistema con el 8079
alvarmat said:
Problem solved
I found the software I was looking for (root-alcatel-one-touch-pixi-34-official-t3193624 / page258), Use Sp Flash Tool to format and update, then recharge the battery, then recharge the battery connecting a charger directly on the battery output cables and after all that my tablet resurrected. Thanks for everything.
Click to expand...
Click to collapse
@alvarmat Could you provide more infomation on the battery charging part? I'm trying to unbrick a Pixi 3 8079 that won't charge, but I'm on the fence of doing something like that for fear it may damage the battery and the circuitry. Which charger did you use?
SOLUTION
Maybe it's late but i hope it helps someone
Chain 2 AA batteries in serial, end to end , connect 2 cables on both ends using electrical tape. - end ground to the metal CPU cover and + end touch solder on red wire coming from the battery for a minute and the device should turn on.
There is a guide on YT using voltmeter but I'm guessing like me you don't have one
Don't use the stupid update tool!
Hello guys!
I've been trying and reading as much as possible and I haven't been able to bring my Viyo 5 Mini back to life, using SP FLASH TOOL, I have installed the drivers many times and in many different ways but nothing.
After a while looking up I found somwhere somebody said to deactivate the antivirus, I did it and it worked out but my phone ended up without IMEI and with the NVRAM error, so as it worked ONCE I tried to install a recovery to root it and fix these problems, but I got it bricked again, I tought I could rescue it again but after this it doesnn't work, the pc does the sound when I plug the phone but the SP Flash Tool does not start.
I install the drivers and they appear on Device Manager but they have the code 10 error saying the devices cant't start, only ONE works, the one that says Preload.
please someone help me I'm going crazy, I'm not very good at this but I used to handle it very well, it's this phone that is giving me trouble.
my pc it's on 64 bit and win 8, in case that info matters a lot, I have also tried running the SP Flash tool on XP (SP3) commpability
I have been switching the driver of the only device that seems to work to the others to see but still nothing.
thanks in advance for any help
the phone version again is Blu Vivo 5 Mini V050Q
I need expert consult...
My Lenovo Vibe k5 was running on AOSP v4.6
I tried to install Vulkan API zip file that is available for some Xiaomi phones... After I flashed it (TWRP) My phone doesn't start anymore. Only the bootlogo showed and phone turned off automatically....
After trying several times I managed to open Recovery(TWRP) mode manually...I wiped out everything and installed the AOSP rom again and it run just fine...
But , the problem is when I go to about phone in setting , the processor section shows 'unknown'... And then I discovered that QFIL doesn't recognise it as a Qualcomm device...
I am kinda worried if the Vulkan API blobs make any disturbance in my stock processor...
And every time I want to roll back to stock ROM..for god's sake it becomes like a 24hr job just to recognise the processor by Qfill... Qualcomm USB Driver fails most of the time..
Anyone got any fix..pls help..