Anyone try this rom ??? This is official and I think it is stable.....Please install this rom and inform me here and I will be grateful to you.....
ROM:
删库跑路 - 马丁龙猪的博客
刷机的时代其实早已落幕，迟迟下不定决心只是希望能让魔趣多存续一些时间，但该来的终究会来。 马丁龙猪今天决定删库
download.mokeedev.com
TWRP:
Download TWRP for cancro
Download TWRP Open Recovery for cancro
dl.twrp.me
OPENGAPPS:
The Open GApps Project
OpenGApps.org offers information and pre-built packages of The Open GApps Project. The Open GApps Project is an open-source effort to script the automatic generation of up-to-date Google Apps packages. All Android versions and platforms supported.
opengapps.org
Thanks for sharing.
As I do not have this device, I can not test the rom. Sorry.
hello, i'm trying to install this rom on my mi4, but gapps installation is failing with error 70 (no enough space).
How did you manage to install gapps ?
thanks
USe mag
brice83 said:
hello, i'm trying to install this rom on my mi4, but gapps installation is failing with error 70 (no enough space).
How did you manage to install gapps ?
thanks
Click to expand...
Click to collapse
USe Magisk module gapps
Related
Hi ,
About:
This is an unofficial 6.0x build of Blisspop compiled using caf source from sultanXDA.
Changes from official build:
--
Code:
All sultanXDA's patch[/color][/b]
--
Code:
SnapdragonCamera[/color][/b]
--
Code:
android_hardware_qcom_media
-
Code:
android_hardware_qcom_display
-
Code:
android_hardware_qcom_audio
-
Code:
android_kernel_oneplus_msm8974
-
Code:
proprietary_vendor_oneplus
-
Code:
proprietary_vendor_oppo
-
Code:
android_frameworks_base
-
Code:
android_frameworks_av
Source used:
1.https://github.com/BlissRoms
2.https://github.com/sultanxda/android_kernel_oneplus_msm8974
Credits:
-sultanXDA
-Blisspop team
-XDA
-Google
Let me know if i have missed any of you .
Latest Download(08/02): (Refer the second post for the older builds)
Blisspop_CAF_MM_08/02
Screenshots:
Uploading..
XDA:DevDB Information
Blisspop, ROM for the OnePlus One
Contributors
Vivek_Neel
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2016-01-20
Last Updated 2016-02-07
Changelog:
V8:
Here
V7:
Here
V6:
Here
V5:
Here
V4:
Here
V3:
Here
V2:
Here
V1 :
Initial release
Older Builds:
Blisspop_CAF_MM_19/01
Reserved
Just in case..
Happy To see bliss marshmallow first caf build
Downloading
Will tell u bugs after testing ?
is it necessary to use latest firmware ?
i mean this :
CM 30/12 from jgcaap
Will give it a test run later today. Looking for something to update to and test.
@Vivek_Neel
Mate...Bliss for MM called Bliss 6.0 and i think you need to drop the *Pop* in your first post + the thread title too just to avoid some confusion...peace
...thread sub/
storm119 said:
@Vivek_Neel
Mate...Bliss for MM called Bliss 6.0 and i think you need to drop the *Pop* in your first post + the thread title too just to avoid some confusion...peace
...thread sub/
Click to expand...
Click to collapse
Yeah sure mate. Will do once i am on my laptop
Is it 6.0 or 6.0.1 ?
shield1331 said:
Is it 6.0 or 6.0.1 ?
Click to expand...
Click to collapse
6.0.1
Just flashed the ROM booted up fine thanks for ROM vivek
Check your inbox when you have a sec bud
Does Bliss6 support encryption?
EDIT: Flashed on top of an already-encrypted device and it decrypts and works just fine.
Blisspop, my favourite lollipop Rom. Now I'm on Temasek 6.0 (CAF) but I will try this one in a few days. Excellent work Vivek_Neel.
Vivek_Neel said:
Older Builds:
Click to expand...
Click to collapse
lol, you should update the OP )
1. refer to post #3 for older builds
2. is the 20160120 latest or "Latest Download(19/01)"
3. nice job, been waiting for this one
Thanks a lot :angel:
Thanks for porting BP to MM!
So I had the last CAF build flashed and decided to upgrade with this rom and had the oppo.verify_trustzone error. Followed instructions posted on Cm13 thread here and it is booting fine
Here are the instructions I used:
If you get an error when trying to install ("oppo.verify_trustzone" error), then first you must install/use TWRP recovery 2.8.6.0 (TWRP 2.8.7.0 cannot properly update the modem). Next, download and flash the latest official CM13.0 nightly. Then, without rebooting from recovery, wipe /system and flash my ROM. This process is necessary to update various firmwares (including TrustZone), as the updated firmware is needed by my ROM. After flashing my ROM, flash a Google apps package, and then reboot.[/COLOR]
Installation instructions (for updating to a newer release):
If you are already running my CM13.0 ROM, then you can update to a newer version of the ROM via the built-in OTA updater or by simply dirty-flashing the new ROM build without wiping anything. HOWEVER, do NOT reinstall Google Apps after installing a new update.
Click to expand...
Click to collapse
flashed open gapps and it booted fine, let it sit for 5 minutes after boot, rebooted in to recovery, and flashed Xposed-v79-sdk23-arm.zip.
Restarted phone and it stuck in bootloop
went back into recovery, sideloaded xposed uninstaller, wiped cache and it boots again.
miss the custom pattern unlock too
OP feel free to continue these builds if you like. OPO builds from source with no issues now but I have no problems with you building unofficial. However if you would like to contribute to the OPO source just let me know via PM and we can get you sorted out.
Just messing with optimization routines and toolchains now. Thank you for all your help man! The team thanks you as well!
ahb83 said:
Thanks for porting BP to MM!
So I had the last CAF build flashed and decided to upgrade with this rom and had the oppo.verify_trustzone error. Followed instructions posted on Cm13 thread here and it is booting fine
Here are the instructions I used:
flashed open gapps and it booted fine, let it sit for 5 minutes after boot, rebooted in to recovery, and flashed Xposed-v79-sdk23-arm.zip.
Restarted phone and it stuck in bootloop
went back into recovery, sideloaded xposed uninstaller, wiped cache and it boots again.
miss the custom pattern unlock too
Click to expand...
Click to collapse
I think you will need newer version of twrp for this MM Rom:
http://build.twrp.me/twrp/twrp-2.8.7.1-bacon.img
RBwai said:
I think you will need newer version of twrp for this MM Rom:
http://build.twrp.me/twrp/twrp-2.8.7.1-bacon.img
Click to expand...
Click to collapse
didn't realize a new one was out, but that did the trick. updating to new one now.
Thanks
OpenGApps Not Showing Up After Being Flashed AOSP Build & How To Add APK To SystemIMG
Hi! I have built AOSP for my Nexus5X and I am wondering how to get Google Apps to show up in my ROM. I flashed the gapps package on the AOSP build but they do not show up. Also, I want to add a prebuilt APK with no source code available to my ROM as well. How can I do this? I think I need an Android.mk? Thanks
There is Android 10 ROM for Xperia Tablet Z4.
It's quite stable.
Kernel sources.
Bugs:
- The same as LOS 17.1.
How to install:
1) use TWRP 3.4.0 (this is better).
2) do factory reset (wipe)
3) Flash gapps, magisk and that’s it.
Change log:
20210108- initial build.
Last builds (mirror) are here.
Sabar_op link
We must be infinite grateful to sabar_op for his hard work in development of this rom and Bernie and Tarkzim who help to update kernel for kitakami devices. :good:.
Instructions:
0. Make sure your bootloader is unlocked
1. Download ROM zip from the link below, and grab Magisk patched boot.img inside the folder as well if you want root access
2. Reboot to bootloader
2.5. Flash updated bootloader.img and radio.img from Google site
3. Use `fastboot -w update LineageOS_microG-bramble-(BUILD DATE HERE)-userdebug-signed.zip` to flash
and yes, you can omit the "-w" parameter if you're not flashing for the first time, aka just updating from previous release
4(optional). Hopefully after flashing you'll be booted into LineageOS, reboot to bootloader again,
and flash the Magisk patched boot.img extracted from the 7z file with `fastboot flash boot magisk_patched.img`,
reboot after finished
5. Enjoy!
Click to expand...
Click to collapse
Download from GitHub Release page
Download(MEGA, won't be updated anymore)
Features:
1. MicroG integrated nicely (Thank OmniROM dev([email protected]) for the repo)
2. Replaced default WebView with Bromite WebView
3. Default DNS was set to UncensoredDNS in framework overlay
4. Removed unnecessary prebuilt APKs
Click to expand...
Click to collapse
Contacts:
Telegram:
Channel for Pixel 4a 5G related stuff
Group for Pixel 4a 5G discussion
Contributors
dic1911
ROM OS Version: Android 12
ROM Kernel: Linux 4.x
ROM Firmware Required: Current
Based On: LineageOS
Version Information
Status: Testing
Created 2021-12-19
Known Issue
1. SMS messages not receiving (Fixed in 2021/12/27)
2. No network access for apps installed in work profile (Looks like ROM side bug, still investigating)
How do I install for the first time? Please help me
trongcccc said:
How do I install for the first time? Please help me
Click to expand...
Click to collapse
Where are you up to? Have you unlocked the boot loader, as per - https://wiki.lineageos.org/devices/bramble/install
I'm running into my pixel 4a5G in a boot loop. I downloaded the wrong lineage product, forgetting that I have A-12. duh.
Just a quick head up, SMS message functionality isn't working in initial build, it's fixed in latest build (2021/12/27)
Hello! Mind elaborating on this step? Thanks!
2.5. Flash updated bootloader.img and radio.img from Google site
(What Google site? Do you have a URL? Specific version?)
kevin71246 said:
Hello! Mind elaborating on this step? Thanks!
2.5. Flash updated bootloader.img and radio.img from Google site
(What Google site? Do you have a URL? Specific version?)
Click to expand...
Click to collapse
Official factory firmware, any version as long as it's Android 12 and for your phone.
Quick question, is this just using the lineage 18.1 device trees or?
EDIT: Nvm i saw the 19 branch
Hey quick question, how do you package the finished build as a bunch of images?
A little heads up, initial build for Lineage 19.1 is now up, without Bromite System WebView for now.
Another build is up, now with Bromite Webview and April security patch!
How do I get support for this 19.1 version? I tried the official Lineage channels but they told me they do not support. I downloaded and installed from here:
LineageOS for microG
lineage.microg.org
nanu.nanu said:
How do I get support for this 19.1 version? I tried the official Lineage channels but they told me they do not support. I downloaded and installed from here:
LineageOS for microG
lineage.microg.org
Click to expand...
Click to collapse
I doubt anyone really provide extra support for that as they're mostly just grab existing LOS stuff and build without further effort afaik.
ProtonAOSPAndroid 12 ROM for Pixel 3
ProtonAOSP is a minimal Android fork (custom ROM) focused on UI/UX and performance, with a touch of privacy.
Refer to screenshots here.Installation:
This ROM is distributed as an otapackage, meaning that it can be sideloaded via recovery.
To install this ROM, download the ZIP, reboot your device to recovery, use the command "adb sideload <zip name>", and then format data.
Changelogs:
- Initial build.
- merge aosp r26 tree changes for bluecross
- include active edge and flip to shhh
- switch to vulkan UI renderer (smoother animations)
- use aosp's r26 kernel
Known issues:
- None so far.
Notes:
- ROM ships with minimal gapps.
- Boot image of the ROM is provided for magisk patching.
- This is an unofficial build.
- ROM's features here
Downloads:
ROM | Boot Image
Consider buying me a cup of coffee if the ROM helped, I'll appreciate it
ROM Source Code
Kernel Source Code
Device Tree
Reserved.
Nice to see A12 roms are rolling in now.
Psyched to see this! The ROM runs great so far.
One thing I did notice is that the ability to toggle camera and microphone permissions is missing from both settings and quick-settings. I'll try re-installing and see if that helps, but is this the case for anyone else?
Do I need a stock ROM installed before flashing it?
3XL????
Are this rom will gonna be official soon?
Failed to download boot.img
Is it possible to make this rom vanilla?
Hello, first of all thank you dev for bringing the almighty protonaosp to blueline!
Done sideloading a couple of hours ago. First impression, rom is clean and buttery smooth. There were stutters at first when the phone encounters new animation but after that it is astonishingly fluid. Thanks to the vulkan i guess. Will report more in a couple of days for daily usage scenario.
Pls add more gapps package like message, gmail, drive, map, etc
Everything is working now, please add vanilla build for stable release.
Zulu48 said:
Pls add more gapps package like message, gmail, drive, map, etc
Click to expand...
Click to collapse
The purpose is for a clean, minimal initial package. Just install those from the Play Store or using their APKs afterwards.
Cant flash any gapps due to low system storage.please make a gapps build from
your next build.atleast replace aosp apps with gapps.
Hi thanks for the work.
But none of the download options are working.
Can you please fix and share those links.
Again, thanks for the work.
With a custom rom like ProtonAOSP, will this be recognised by Google Photos still as a Pixel 3 so the unlimited photo upload (in data saver quality) is still working?
Any update of this rom?
Links seem to be broken.