so a few days i posted in my own thread in the guides about rooting the android 11 , but i think it needs it's own question topic.
The problem is: since i have android 11 i cannot get root back onto the phone. The magisk patched boot image won't boot.
what i wrote on there:
So i finally got it ( android 11) as well,
However, when trying to boot the patched boot image, i get stuck on a Motorola logo.
it is booting, i get the screen flicker, yet it's stuck on the moto logo after that.
If i flash back the non-patched boot.img from fastboot it works fine.
has anyone here had the same ?
i'm using:
update channel reteu
magisk manager 22.1
build number: RPE31.Q4U
update: i tried the canary build of magisk but it doesn't seem to change anything.
installed version of magisk: 22104
i was hoping someone here can confirm that they have or can't get it to working on the reteu channel .
phone model is the xt2041-3
and ofcource , after posting this i found the answer......
it appeared i had a module installed not compatible with android 11
so i booted into safemode ( hold volume down as soon as the phone vibrates) , then reboot the phone ( magisk modules will be disabled after a safemode boot) , i removed all modules, and i'm back
Related
Hello Everyone,
I own a Motorola quark XT1225 64GB indian version. I had earlier rooted it and installed Lineage OS 14.1 (Unofficial) in it. The installation was without any issues and worked for few months then one day i pressed the power button to turn on the phone and it went into a boot loop and nothing would work. i gave it to a repair shop and he installed android 6.0.1 in it and gave me back. But my phone wont connect to WIFI and later i found out that there was no IMEI or any network related information left in it. only the OS booted and nothing else was working. Even the Developer options were not available as for some reason tapping the build number was not giving any result. he refused to fix it. I tried a factory reset from the settings menu with no result. even the recovery was not available any more in the phone. I tried installing new android stock images both for android 5 and 6 first from RSD lite and fast boot mode which kept failing and then i tried it using the command promt. After installation was complete the phone rebooted and android appeared with erasing written under it but then it went into boot loop and would keep restarting every time android appeared. I tried installing TWRP recovery from the command promt the initial image of the recovery appears but then next second it says unable to mount data and keeps rebooting again and again. Kindly suggest ways to fix my OS as well as have my IMEI restored.
Really need help.
Thanks a lot.
I'm having a bit of trouble with this. I've already been through NMaverick's guide, to very limited success. I was able to flash an older version of my firmware with SP Flash Tool, and get TWRP flashed and booted into recovery, disabled encryption, and installed Magisk. My screen is flickering, so I don't want to leave it like this.
Does anyone have any advice on how best to move to the newest firmware without losing TWRP/root?
Just to add: With my most recent firmware available, the screen doesn't flicker, all the stock functionality appears to work fine, but I can't boot into recovery. When I hold down Volume Up, the phone acts like it's stuck in a boot loop. I get a green line across the top of the screen after the boot logo, and then it tries to boot again. Letting go of Volume Up results in a normal boot to the OS.
Hello everyone, where I can find this version for the 3T or if someone has it in Backup, it is very important for me to find it:
CQ3060MF2_AGS32_Armor_3T_20181107_V01
Thank you
I installed stock Android 10 Q (from 9 P) via Odin on my galaxy tab s6 LTE, then i unlocked the bootloader and rooted with magisk (manager 7.5.1, zip 20.4) following the magisk git site installation instructions (which are a bit more complicated than from some third party sites.)
Everything ok, but then when i power off it reboots. It's not in a bootloop: it boots up normally, but if i can't power off then that's not good when I'm not using it. I tried patching again and checked i got the the same md5.
Eventually i found that if i booted to recovery mode and there i choose reboot, it reboots to unrooted, but it does power off.
To get root access again i start with the recovery key combination but let go at the splash screen before it enters stock recovery mode. This means that i have to reboot each time i want to either switch it off or have root (but not both.) It's good enough for now, so I'm posting this in case anything else has the same problem.
Edit: I used Odin to flash back all the stock firmware and I can now get back in the tablet. Any idea what I did wrong with Samsung Multi Disabler?
Was trying to flash my tablet and was mostly done but after trying to flash the Samsung multi-disabler the tablet will no longer boot. The Samsung and Knox logos come up with the Red Text warning about the root but the screen then goes to black and the device reboots. I am able to get in to download mode but I am unable to get into Recovery Mode as the button combo will not work.
1: I unlocked Boot Loader
2: Rooted with Magisk
3: Disabled VBMeta
4: Disabled Android Safeboot
5: Flashed the TWRP for Android 11
Everything booted just fine at this point so I flashed the Samsung Multi Disabler using the "TWRP Manager" from within Android. Now my device is stuck a boot loop and I cant get out.
Any help is appreciated.
HI,
I inherited this phone. ( D6503 )
Fixed a few hardware problems, now looking at software improvements.
I have unlocked the bootloader , but for the life of me I cannot get a recovery on this phone??
I have previoiusly done flashing on nokia, motorola and Nexus, but I am having no luck with this sony
I am able to connect using ADB, and can get to fastboot, but it stops there.
Issuing '' fastboot boot twrp.img'' ( to try and boot temporarily to twrp ) gives me a blank screen.
issuing ''fastboot flash recovery twrp.img'' does the same.
I cannot get a bootloader screen at all, even using the key combinations.
I cannot boot any recovery at all.
Is there someone here who can put me out of my misery
I am not looking to perform anything fancy, I just want to flash the latest lineage to see how it performs
Many Thanks in advance.
pootler.
Anybody???
I have rooted the z2 by dropping down to 5.11, installed the twrp app, then flashed recommended version of twrpl
Then when I power off the phone, and press the power and volume down buttons, instead of booting into twrp after 7 or so seconds, it just reboots after abour 2-3 seconds???
Can anybody help?-------please
I have even tried rooting , then installing twrp by either 1) fastboot or 2) twrp app.
I then installed NDR utils, to reboot to recovery - it still reboots to main system??
HEEELLPP !
I also tried flashing TWRP with 1) fastboot and 2)the twrp app,
I then installed NDR utils ( i have root ) , and it still wont boot into recovery, just straight into system???
HEELLPP!!
Thread closed on request of OP @pootler