Hello, i have been trying to install lineage on my huawei p8, but it does not work really good (i have a compiled lineage).
The problem is: I cant install TWRP Recovery.
I have installed the right twrp image from twrp site and when flashing it via heimdall suite it says "100% DONE OKAY", but i cant boot into it. I always get into eRecovery using the key combination, and when i use android apps like reboot managers and boot direct into recovery, i also dont get into twrp.
Related
Hi all I want to ask for your help on that and made a mistake when installing the application GooManager.
I happen to install the application on my tablet GooManager back to my current rom, but the problem that I have is that my tablet really has the lock fastboot, and for that reason I have been looking for other alternatives in order to install custom roms without losing the current rom.
But now I'm in serious trouble because Goomanager urge upon the OpenRecovery-also install TWRP-2.5.0.0-hws7300u.img. using OPENRECOVERYSCRIPT.
This worked perfectly and manages to do the installation, but the problem is that not good for my huawei tablet and did not start properly.
I have now a recovery.img which is the stock of the tablet, but as I have the fastboot lock, I can not install it with adb and other methods I found surfing the web, so I ask for your help, if I can I can show you how to install the stock recovery in a safe and transparent, you do not need that this unlock fastboot.
Or if I can use the OpenRecoveryScript GooManager Scrip somehow to not install the OpenRecovery-TWRP-2.5.0.0-hws7300u.img and achieves install my recovery.img which is what I want to use.
I have similar problem. Installed TWRP 2.5 but it's buggy, cannot complete data backup (hangs with reboot). I need to install a previous twrp version but can't use fastboot for practical reason and rom toolbox crash while starting to flash twrp 2.3 :|
any hint?
Question: goomanager is able to flash a recovery with tablet on and not via adb fastboot, so can we flash a recovery (twrp or stock) via terminal emulator? How?
used good old dd on /dev/block/mmcblk0p17 partition
How and where..
Working on my brothers mediapad.. he have installed twrp 2.3.2.3 and it cant flash either stock or any roms i tested with. it say faild.
So now i want back to stock rom and stock recovery. Or get this crap to work.
Any help.?
I have understood that it can be repaired but from linux, you have to press the button volume + and volume-for more than 30 seconds, this connected via USB and then get access to the 32 partitions mediapad there looking for the recovery.img and replace it by ready stock and fixed the problem.
TheMasterMindGT said:
I have understood that it can be repaired but from linux, you have to press the button volume + and volume-for more than 30 seconds, this connected via USB and then get access to the 32 partitions mediapad there looking for the recovery.img and replace it by ready stock and fixed the problem.
Click to expand...
Click to collapse
how do you return from 10.1 cynogenmod the stock rom?
So, I kind of rooted my device using Kingo Root and it wasn't successful (I guess). So, in fastboot mode, I tried OEM unlock and it didn't work too; but anyway, I flashed TWRP recovery into my phone and through that I tried to install CM 13,14 custom ROMs which was completely unsuccessful. It doesn't allow me to install any ROM. And says that root privilege is lost. And now, all that I have access to is a phone stuck in bootloop and TWRP which doesn't allow me anything to do because apparently root access is lost. :crying:
I tried every method of flashing via YGDP tool and it is stuck at 'entering download mode'. I have installed different drivers over and again to fix as suggested by different threads but still, it's the same. [Windows 8.1] . And is there any other tool to flash this same stock ROM or better, can I get root access again in a bricked device and install a custom ROM any way?:fingers-crossed:
I also have access to ADB sideload via TWRP, so can I get stock ROM in .zip format. So far, I can only find it in .CPB format; maybe I can use .zip stock ROM via ADB sideload to flash it. Please help if any of this is possible.
*Apology for such a long question but I think you guys must know everything in order to provide me with a fix*
It's fixed.
dhananjaydhiman said:
So, I kind of rooted my device using Kingo Root and it wasn't successful (I guess). So, in fastboot mode, I tried OEM unlock and it didn't work too; but anyway, I flashed TWRP recovery into my phone and through that I tried to install CM 13,14 custom ROMs which was completely unsuccessful. It doesn't allow me to install any ROM. And says that root privilege is lost. And now, all that I have access to is a phone stuck in bootloop and TWRP which doesn't allow me anything to do because apparently root access is lost. :crying:
I tried every method of flashing via YGDP tool and it is stuck at 'entering download mode'. I have installed different drivers over and again to fix as suggested by different threads but still, it's the same. [Windows 8.1] . And is there any other tool to flash this same stock ROM or better, can I get root access again in a bricked device and install a custom ROM any way?:fingers-crossed:
I also have access to ADB sideload via TWRP, so can I get stock ROM in .zip format. So far, I can only find it in .CPB format; maybe I can use .zip stock ROM via ADB sideload to flash it. Please help if any of this is possible.
*Apology for such a long question but I think you guys must know everything in order to provide me with a fix*
Click to expand...
Click to collapse
Its fixed now, I assume it was because of the ROM file being downloaded through chrome in phone, I downloaded ROM and GApps in PC and flashed through TWRP and bam! Its back on:laugh:
TWRP - 2.4.4
ROM - Resurrection Remix 5.7.2
Thanks anyways!
Hi, I want to install custom rom on my tablet but I can't flash or enter into any custom recovery I know.
Tablet specs:
It's a chinese BDF tablet 10''
Brand: JTY
Board: KT107_L1_20160428
Procesor: MT6580
Kernel: 3.10.72+
Android: 6.0 Marshmallow
I tried to do it using many tutorials and many ways founded on many forums, including this, without success.
During these attempts I unlocked root and bootloader, installed on my pc ADB drivers, Google USB drivers, MTK vcom drivers, PdaNet, on my device PdaNet, BusyBox, TWRP manager and ROM manager.
First I tried to install TWRP recovery using the newest recovery from their website and 3 others recoverys which I found on the internet and should be dedicated for my tablet. I installed each one of them using ADB in Command window, SP flash tool and Easy magic TWRP installer, which is dedicated for any MediaTek device, both ways: manual and automatic. Every attemp was successful but every time when I checked in TWRP manager, it said what I don't have any custom recovery installed on the device, when I tried to enter into it through the boot menu it wasn't entering into TWRP, only the chinese stock recovery.
Then I tried with Easy magic PhilZ 6 installer, but the effect was the same.
At the end I tried to install CWM using MTK Droid Tools, but this program doesn't see my device and I couldn't fix this.
Could any of you help me somehow, explain or give me a right recovery file so that it works. I really want to change my Android to a LineageOS and I'm tired of my fails. I'm working on this 5 days, accidently bricked it, stucked on bootloop and stucked on logo screen so many times that I can't even count, I'm desperate for help.
any luck yet ?
Hi !
I have the exact same issues with my Chinese BDF tablet. No matter how i try to Flash a custom bootloader to the tablet, it simply wont work... Even tho it looks like i succeed, whenever i want to boot into the custom bootloader, it always boot into the installed chinese bootloader, and the chinese bootloader wont let med flash custom firmware to the tablet. Let me know if you find a fix, and i will do the same if i succeed installing a different bootloader
I did not see this specifically in your question so as far as i understand it. You first flash the twrp.img, this is a temporary boot file. DO NOT REBOOT YET. flash Magisk.zip and twrp.zip - now reboot and you should be rooted.
Hi, I'm hoping someone can offer some assistance. I have an Elephone P9000 (normal version NOT lite) that has official Android 7.0 and I want to install LineageOS 14.1.
As per the instructions I used SP Flash Tool to downgrade the phone to Android 6 (Elephone_P9000_20170112) which worked fine.
I then attempted to install TWRP 3.2.1.0 which also appeared to work ok as I could boot into TWRP recovery and all looked good. However when I tried booting the phone normally it stuck at the white boot logo and would not progress any further.
So I reloaded the Elephone_P9000_20170112 rom again with SP Flash Tool after which the phone would boot normally and then tried installing TWRP 3.0.2.8 as I'd seen threads saying that this version definitely worked with the P9000. However this produced the same result that I could boot into TWRP fine but it would get stuck at the boot logo if I tried booting the phone normally.
I have also tried re-installing the ROM but unticking the recovery option in SP Flash Tool hoping that this would leave the working TWRP intact but this didn't work either.
When I try to boot into recovery I get the little Android laying down with a red exclamation mark.
So I don't know where to go now. I can get EITHER Android to boot or TWRP to boot but not both.
Just in case it is relevant, I am using SP Flash Tool v5.1804_Win in Windows 7 32bit. I don't have any SIM's in the phone and no SD card inserted.
Can someone point me in the right direction please.
Thanks
Russell
Try flashing stock rom with 810 at the end then twrp 3.2.1 and then aokp it is better then lineage
aljoscha81 said:
Try flashing stock rom with 810 at the end then twrp 3.2.1 and then aokp it is better then lineage
Click to expand...
Click to collapse
Thanks very much, that worked fine and AOKP looks really good. When it said install the latest Android v6 it obviously means the previous latest not the current latest
Just in case anyone else is having the same trouble I was:
Using SP Flash Tool load the 20160810 ROM available here: https://forum.xda-developers.com/elephone-p9000/development/rom-elephone-p9000-20160810-t3445897
Then, also using SP Flash Tool, load TWRP v3.2.1 which is available from here: https://eu.dl.twrp.me/p9000/
Then you can use the TWRP recovery to load whichever ROM you like (LineageOS, AOKP etc, etc)
Once again, thanks very much for your help.
:good:
I have realme 7 pro unlocked bootloader, and when I installed derpfest 12 ROM from TWRP it successfuly installed but I cannot no longer boot to recovery (I tried TWRP and orangefox recovery )
Can someone pls help?
so you tried to flash other custom recoveries and it didn't work?
Yes, but it didn't work
I had this problem too
Mine was caused by wrong custom recovery.
For some reason, this device needs a different custom recovery according to the android version installed.
I have no idea how or why but it is what it is
If you have orangefox for A11 and bootloop upon entering recovery try installing A12 orangefox.